I have two A500s and have rooted and flashed them both successfully.
One day my main tab, the other is for the family, was working then it just stopped. It would boot to the "Acer" logo and go no further. I left it like that all night with no result.
So, I figure that I'll just flash a new rom to fix it. I tried 6 or 8 different roms; all booted only partially like before. I did a factory reset, flipping the screen lock back and forth. Still would only boot part way and hold. I continued to look for different roms (what do they say when you keep trying the same thing expecting different results?).
Now the tab doesn't seem to come on at all; that is the screen stays dark. The light on the power button comes on and I can turn it off by holding for 10 seconds and turn it on again. I connected to my PC and it requested a driver which I installed. the PC makes the "new hardware" sound but I don't find it in "My Computer".
I have tried to access it via “adb devices”, but no devices are detected.
This is the extent of my efforts and knowledge. If anyone is able to help please email me at [email protected]. I have been reading the blogs and am posting this to several blogs so I might not find your answer if it is to the blog only.
Btw,
I did find a post that describes something like this on an A200 at this blog:
http://www.acertabletforum.com/forum/acer-iconia-a200-help/5895-solved-my-a200-wont-turn.html
I'm tempted to attempt it if I don't find an answer specific to the A500.
THANKS IN ADVANCE FOR ANY HELP!!!
==================================================
edit: I tried the A200 solution to no affect.
bricked a500
I have the exact same issue, does not go past acer logo screen and Win 7 does not show the device when connected. I can hear the sound when you plug the usb cable but nothing visible or no icon on the screen.
Any help would be greatly appreciated.
Thanks
Santosh
Bricked .. and clueless ...
ok have an Iconia tab a500 here from a friend, he tells me he put in wrong adapter.
I think its bricked ..
ALready read alot of stuff here and did try some things but cant seem to find the correct solution .
I can connect in apx or fastboot, i dont have uiid and the thing is locked also
Bootloader = V0.0312-ics
if i start up i get " boot veriefied failed"
i found some downgrading method on here "method 2" but when i do it and he reboots i get the message "abort illegal blabla"
I would really appreciate if someone could help me point me in the right direction to start.
Using win7
Grtz
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help
Hey guys. I tried rooting my LG G4c but after rebootingen it seems that my phone is stuck in a loop, and i can't fix it.
What happens when i turn the phone on:
1. LG logo turn up
2. The following message appears:
[670] --------------------------------------
[670]
[670] Boot verification fail!!
[670] - cause : MISMATCH_SIG_LEN
[670]
[670] --------------------------------------
3. Phone reboots
Using the power button + volume down does NOT work anymore to start recovery mode (although starting the IMEI display still works).
I tried using LG UP to install the original firmware via USB but the device does not show up in the list (probably because the phone keeps rebooting itself). Some website also said to connect the phone with the pc, turn LG UP on, then put out the battery and put it back in to make it work, but that also didn't work.
Anyone know what i can try next? What method can i use to reinstall the firmware? And if it's not possible, does it cost much to repair and who should i ask?
Edit: It seems i can start "Factory data reset" but when this proces starts the phone restarts and continues the loop with the error message.
I also tried connecting the device with LG UP while the phone is stalled on the IMEI screen and the Factory data reset screen. This way the phone does note restart itself and it might appear in the device list of LG UP. But too bad it still didn't work.
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
vanderplate said:
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
Click to expand...
Click to collapse
I had this problem too. I send it to LG and said the phone was unplugged during update process. They flashed it and I gave it to my mom. I have an S4 yet. Much better performance and rom support.
download mode
vanderplate said:
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
Click to expand...
Click to collapse
Can you get it into download mode?
Soo i accidentally disabled the dev options on my samsung galaxy s7 edge and then decided to restart my phoe because i didnt notice and now im stuck with an error that says "custom binary blocked by FAP lock" now i looked around the internet on ways to fix this but the thing is that i cant really connect my phone to my computer, yes i did the volume down+power+home button thing and i connected it to my pc but nothing happened, odin didnt recognize my phone and my computer reads it as "gadget serial" i tried installing the usb drivers and all but i keep getting errors, its like my phone doesnt realy wants to cooperate.
Anyways i was wondering if any of you could help me with this please, i beg of you if anyone has an answer im willing to try, also if you need more info just ask, ill be glad to provide, thanks!
Anyone?...
Well i managed to fixed it so heres the solution for all of you that may come across this,
Soo basically make sure youre pc is fully updated, it must have all window drivers installed (i used windows 10) all window updates, make sure all the pieces of your pc are updated and then connect your phone and for the love of god be patient
I take it this is you're first time encountering something like this... at any rate, welcome to the forums.
Hello!
THink I have bricked my phone, but just checking before I go through what I suppose is a long process with oneplus.
Looking for any help. I had a working device - unlocked bootloader and installed TWRP and magisk using MauronofrioTool. ok - however, I found out I couldn't use a fingerprint security option on that would have been anoying. So... Long story short. I used MauronofrioTool to relock bootloader. Oops - so that didn't work. THen found out I couldn't do anything except stare at g.co/ADH message on my screen. Couldn
't get to fastboot or TWP. ANyway, so I managed to up and down volume and enter into TWRP. Was still connecting to the tool, so I downloaded factory Zips and tried to install via tool after unlocking - Seemed to be working ... but it stopped mid way through a process and hasbn't come back! NOthing at all. I wonder if I could have triggered an OEM thing? ANyway - literally nothing no buttons work no screen action. I see a QUSB_BULK_CID:etc number when connecting the phone, but that is it. No fast boot or any other actions available.
PLease, pretty devastating, Anyone know if I can do anything?
I'm no pro but I use this tool which helped me:
henk-jan said:
I'm no pro but I use this tool which helped me:
Click to expand...
Click to collapse
Thank you. I feel I am little past this stage now though.. Also trying the brick reprieve software . Just can't get my computer to recognise the phone now. No ability to get to emergency download path - think it is my crappy cihinese pc (old Huawei tablet basically) or Windows via apple that have me stranded.
**********SOLVED
THe crappy Chinese language Windows tablet worked as the unbrick OP said WIndows would. Must be a kink in the Windows via Mac that could get me into the situation, but not out.
Very relieved... Even though I still am not 100% sure what I actually ended up clicking to get it to register and connect with the unblock tool (which of course was in Chinese) hahaha.
Cheers
CHeers though
Glad you got it sorted out! Cheers
Need Help, please
Just received my OnePlus 8 pro, decided to Root and unlock the bootloader---this went fine.
I then went and upgraded to Android 11 DP3.
I'm now only able to get into Fastboot. at points it will try to boot but only get to the logo screen and then goes black.
When the phone boots up, it goes to Qualcomm CrashDump Mode.
I've been attempting to solve this for half the day with no luck. I've tried Msmtool, but it doesn't recognize the device, even after loading drivers again.
Is there a way to load a ROM from fastboot mode?
Hoping someone can assist, this is super frustrating and I would appreciate any help, please.
Rick
rickhurl said:
Just received my OnePlus 8 pro, decided to Root and unlock the bootloader---this went fine.
I then went and upgraded to Android 11 DP3.
I'm now only able to get into Fastboot. at points it will try to boot but only get to the logo screen and then goes black.
When the phone boots up, it goes to Qualcomm CrashDump Mode.
I've been attempting to solve this for half the day with no luck. I've tried Msmtool, but it doesn't recognize the device, even after loading drivers again.
Is there a way to load a ROM from fastboot mode?
Hoping someone can assist, this is super frustrating and I would appreciate any help, please.
Rick
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997
cultofluna said:
https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997
Click to expand...
Click to collapse
Thanks so much. I ended up getting Msmtool to work. Although my device wasn't on (black screen) and it didn't fully show up in the tool, I decided to start the process anyway and it began to load.
I've been on here for over 10 yeas (XDA) I've just lost my account info and made a new one.
Thanks for taking the time to respond. Much appreciated.