Related
I HAVE BY NO MEANS CONTRIBUTED TO Xposed FRAMEWORK (BY rovo89), OR HAVE DEVELOPED ANY MODULES OF MY OWN. THIS IS JUST A NOOB FRIENDLY GUIDE FOR THOSE WHO ARE THINKING , NOW I HAVE ROOTED MY PHONE WHAT TO DO FIRST?.
I am not responsible for any bricked devices. Install at your own risk.
Click to expand...
Click to collapse
For this guide you will need,
1. Rooted Moto E[Any version]
2. Xposed Framework[updated]
3. Xposed Modules
4. Brain[4 sure]:laugh:
About Xposed Framework:
If you are not a great fan of custom ROM's, but despite of it you want all the functionality of those ROMs,this is where Xposed Framework comes into roll. By installing Xposed Frameworks you can have access to all the Xposed modules present in the Xposed repositories.
Xposed Modules
Things You Can Do:
You can have all administrative access for customization of your MOTO E. You can change status bar, mute ringer by flipping phone, change navbar icons and settings, and all phone and media tweaks with access to system tools,and you can even have your boot animation set by the process.
There goes the list. Follow.
INSTALLATION
Firstly download Xposed Frameworks from the given link below and have it installed on your rooted MOTO E device.
DOWNLOAD LINK : Click Here . By rovo89.
View attachment 2908044
After successful installation of the Framework just go to Xposed Modules,
>Click Framework.
>Install/Update
>Reboot/Soft Reboot
I dont prefer rebooting at this particular point.
View attachment 2908061
Here, you can see i have already installed, and after first reboot you will have all the active values as green.
After that go to Downloads and here you have all the access to all the modules. You can always create a backup before trying any of these modules.
MODULE YOU SHOULD TRY FOR SURE
1.Gravity Box for KK in MOTO E case.
Gravity Box is the package of all the singleton modules that you can find in downloads.
2. Xblast tools for Android above 4.0.3.
Same as Gravity with advanced tweaks. For starters i will suggest Gravity Box.
Thanks to @Hetalk for creating the post mentioning the working Xposed Modules.Follow .
_____________________________________________________________________________________________________________________
Module for navbar?
@IvsomEmidio
If you want android L nav bar just try gravity box. and under navigation bar setting enable android look
Or
Try Softkeyz
Or
Xblasttools
Or
There are others just google and you will find more mods for sure
Module
Mayank_V said:
I HAVE BY NO MEANS CONTRIBUTED TO Xposed FRAMEWORK (BY rovo89), OR HAVE DEVELOPED ANY MODULES OF MY OWN. THIS IS JUST A NOOB FRIENDLY GUIDE FOR THOSE WHO ARE THINKING , NOW I HAVE ROOTED MY PHONE WHAT TO DO FIRST?.
For this guide you will need,
1. Rooted Moto E[Any version]
2. Xposed Framework[updated]
3. Xposed Modules
4. Brain[4 sure]:laugh:
About Xposed Framework:
If you are not a great fan of custom ROM's, but despite of it you want all the functionality of those ROMs,this is where Xposed Framework comes into roll. By installing Xposed Frameworks you can have access to all the Xposed modules present in the Xposed repositories.
Xposed Modules
Things You Can Do:
You can have all administrative access for customization of your MOTO E. You can change status bar, mute ringer by flipping phone, change navbar icons and settings, and all phone and media tweaks with access to system tools,and you can even have your boot animation set by the process.
There goes the list. Follow.
INSTALLATION
Firstly download Xposed Frameworks from the given link below and have it installed on your rooted MOTO E device.
DOWNLOAD LINK : Click Here . By rovo89.
View attachment 2908044
After successful installation of the Framework just go to Xposed Modules,
>Click Framework.
>Install/Update
>Reboot/Soft Reboot
I dont prefer rebooting at this particular point.
View attachment 2908061
Here, you can see i have already installed, and after first reboot you will have all the active values as green.
After that go to Downloads and here you have all the access to all the modules. You can always create a backup before trying any of these modules.
MODULE YOU SHOULD TRY FOR SURE
1.Gravity Box for KK in MOTO E case.
Gravity Box is the package of all the singleton modules that you can find in downloads.
2. Xblast tools for Android above 4.0.3.
Same as Gravity with advanced tweaks. For starters i will suggest Gravity Box.
Thanks to @Hetalk for creating the post mentioning the working Xposed Modules.Follow .
_____________________________________________________________________________________________________________________
Click to expand...
Click to collapse
Does the Module in which you can Change the Status bar colour for different Apps work in Moto E.....
Guide to install Xposed Installer[even CM 12.1],. list of working &non working module
hi guys,..lets install xposed installer...btw we got official support for 5.0.x and 5.1.x...
http://forum.xda-developers.com/showthread.php?t=3034811
WARNING: after installation dont try every modules for now..try one by one and keep stock img incase of bootloop..[although there is option for uninstalling xposed installer through adb] and I'm not responsible for bricked phone,try on your own risk
Before installing, sdk21 is for android 5.0.x and sdk22 is for Android 5.1.x (cm12.1) please remember this
Steps:
First You need Root- see here
then after obtaining root ,install busybox from here . After installation, open app and click install..
Now there are 2 methods.. 1] twrp flashing and 2]using ADB ...can use any ,choose which is easy for you
TWRP method
[Note: just download whatever version is available in the link below,just make sure it is has x86 and sort off like the files which i am mentioned below]
Go here get XposedInstaller_3.0_alpha4.apk, xposed-v78-sdk21-x86.zip,xposed-uninstaller-x86.zip, [these three enough for us]
place the xposed-v78-sdk21-x86.zip,xposed-uninstaller-x86.zip,XposedInstaller_3.0_alpha4.apk in SD...
install XposedInstaller_3.0_alpha4.apk as normal apk
goto twrp,then flash xposed-v78-sdk21-x86.zip,reboot thats all..it will wipe cache,so ur apps will optimized
if u had bootloop due to xposed at some point..use twrp and flash xposed-uninstaller-x86.zip thats all..
ADB method
download the zip from here
extract the zip anyhere and connect the switched ON zenfone 2 with USB ( usb debugging must be on)
launch InstallXposedFramework.bat ,wait till framework installation is finished (phone cache will be wiped and will reboot)
Launch InstallXposedInstaller.bat to install xposed apk. and thats it.
after installing ur xposed will look like this PIC and this PIC or see the attachment for more pics on verifications
if u had bootloop due to xposed at some point..plug the phone while bootloop,..use RemoveXposedFramework.bat from that folder..thats all
TWRP method For CM12.1 [NO MORE RANDOM BOOTLOOP]
[Note: just download whatever version is available in the link below,just make sure it is has x86 and sort off like the files which i am mentioned below]
Go here get xposed-v78-sdk22-x86.zip, xposed-uninstaller-x86.zip, XposedInstaller_3.0_alpha4.apk,
place the xposed-v78-sdk22-x86.zip,xposed-uninstaller-x86.zip,XposedInstaller_3.0_alpha4.apk in SD
install XposedInstaller_3.0_alpha4.apk as normal apk
goto twrp,then flash xposed-v78-sdk22-x86.zip,reboot thats all..it will wipe cache,so ur apps will optimized
if u open and see the framework it would be like this PIC
if u had bootloop due to xposed at some point..use twrp and flash xposed-uninstaller-x86.zip thats all..
download modules,enjoy xposed
To update Xposed framework :
Using twrp [get the latest xposed-v78-sdk2x-x86.zip alone flash it ]
using adb [get the zip from here ,then just double click InstallXposedFramework.bat ,and wait for reboot....thats all]
credits to @romracer for his v5.1 xposed ,. @Chinaphonearena for rooting guide, @ilos for steps of xposed installing, @shakalaca, @sorg and @rovo89
Note:if you try any module please tell the feedback on this thread.. I will add them in list, and sometimes some modules gives bootloop but while bootloop, press and hold the power button.. It will switch off, now start again.. Do this for 3 or 4 times and wait for 5 mins in each start..
List of working and non working MODULES FOR NOW : here
Good guide !
Maybe you should take feedback of which modules work or not in xposed installer thread and update your thread with them
Thanks for the credit
List of working modules
Xhalo floating window [for lollipop build see here]
Greenify
Intelli3G
Network Speed indicator
Youtube Adaway
Fix lollipop memory leak
Amplify
Minminguard
APM+
Battery Shutdown Meter
statusbar download progress
Xposed Gesture Navigation
Burnt Toast
GravityBoxLP
Heads Up Hide
LPThemer
SB Icon Hider
ScreenOffAnimation
XGPM
XHangouts
Xposed Custom Error
Root cloak module
AppOpsXposed
Handle External Storage
MaxLock
MinMinGuard
MinMinLock
Native Freezer
NoMapTips
Phys Button Music Controls
Xinstaller
XuiMod
Clarity
Disable Fullscreen Keyboard
Lolistat
LuckyPatcher
PatternAttemptsHack
Return My Enter Key
VolumeSteps+
Xposed GEL Settings
XBlast 1.8.8
Flat Style Bar indicators
notification volume seekbar
Power Nap
Xperia/AOSP NavBar Buttons (you need to set qemu.hw.mainkeys=0 in build.prop to enable Navbar)
Flat Style Colored Bars
Nexus Navbar
Hide Xposed IME
crappalinks
LP memory link
CustomShare
YouTube Background Playback
Lollipop Navbar
Blurred system ui (LP) and v1.1
3C toolbox
bubbleupnp
ds battery
Sensify
XDual Statusclock
XMultizone Statusbar clock
Permission Master and Coolify (flat)
Non working module : ( most old apps which are based on Kitkat or below won't work)
Xtended Settings
ilos said:
Good guide !
Maybe you should take feedback of which modules work or not in xposed installer thread and update your thread with them
Thanks for the credit
Click to expand...
Click to collapse
ya i thought to create separate thread..but now added in this itself
modules working :
Intelli3G
Network Speed indicator
Youtube Adaway
Fix lollipop memory leak
Amplify
Minminguard
ilos said:
modules working :
Intelli3G
Network Speed indicator
Youtube Adaway
Fix lollipop memory leak
Amplify
Minminguard
Click to expand...
Click to collapse
APM+
Battery Shutdown Meter
ps I have wrote a stupid thing about xhalo floating window not working before, sorry.
I've installed Xtended Settings from the play store and now I'm in a bootloop...be careful with this module.
Btw I need help ^^' I'm going to open a thread in "ZenFone 2 Q&A, Help & Troubleshooting"
Works fine:
statusbar download progress
Xposed Gesture Navigation
ScreenOffAnimation (it works but in my zenfone you need to change all parameters before get it working...)
Any info on "Ringer and Notification Volume Unlink" module working on the ZF2?
rmcs said:
Any info on "Ringer and Notification Volume Unlink" module working on the ZF2?
Click to expand...
Click to collapse
Done with gravitybox but works nonetheless. No such slider for the popup volume control though.
Thanks!
Tried the xhalo module (lollipop build) and ended up with a bootloop, no luck! Be carefull
Cool
Sent from my GT-I9505 using XDA Free mobile app
i set long press home key to show volume panel
after installing xposed I am getting "Android is Upgrading" popup. Whenever I reboot my phone always 12-15 apps get upgrade. What to do now because zf2 taking too much time in boot.
anybody else just got an update?
Soheir said:
after installing xposed I am getting "Android is Upgrading" popup. Whenever I reboot my phone always 12-15 apps get upgrade. What to do now because zf2 taking too much time in boot.
Click to expand...
Click to collapse
seems like your xposed module list is incompatible with current xposed modules that you installed on your phone..i read it somewhere before, android 5.0 seems to have bug when you installed xposed on it, but forgot on how to fix it..maybe you should check if you have some incompatible xposed module installed..
Sent from my ASUS_Z00AD using XDA Forums PRO
cangcan said:
seems like your xposed module list is incompatible with current xposed modules that you installed on your phone..i read it somewhere before, android 5.0 seems to have bug when you installed xposed on it, but forgot on how to fix it..maybe you should check if you have some incompatible xposed module installed..
Sent from my ASUS_Z00AD using XDA Forums PRO
Click to expand...
Click to collapse
I am using only two modules Greenify and GravityBox [LP].
Soheir said:
I am using only two modules Greenify and GravityBox [LP].
Click to expand...
Click to collapse
weird..did you already tried to wipe cache partition from recovery?
John Laurinaitis said:
anybody else just got an update?
Click to expand...
Click to collapse
What is the number of the update?
Can't handle the sound on this phone. How do we get viper to work?
jkieffer46 said:
Can't handle the sound on this phone. How do we get viper to work?
Click to expand...
Click to collapse
Download ExperienceOS Add-on Aroma 5.0 and flash Divine Beats Audio mod here: https://forum.xda-developers.com/oneplus-5/development/rom-experienceos-r1-0-lite-addon-t3626657
Simpliest way :
- Download and install Busybox on your phone.
- Set SELINUX to permissive mode.
- Download and flash this Viper4android Zip : www.androidfilehost.com/?fid=745425885120697254
Normally all should be working. (Maybe open Viper4android app and install the driver first)
Also don't forget tout uninstall or disable any other audiofx you have.
(I know it's still the 2.4.0.1 version but it's still my fav)
Uninstall any viper APK and flash this on twrp...
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
Does this work while encrypted? Also does it require any additional file tweaking or driver installation?
HDash said:
Does this work while encrypted? Also does it require any additional file tweaking or driver installation?
Click to expand...
Click to collapse
Just flash on twrp...working great ...
After flashing you get the viper icon on your drawer...
Just open it and enable ..
Viper for OnePlus 5
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
Works like a charm! ?
Thank you so much.
Cheers
It is working for me only if I set SELinux to permissive. Tried so many diffirent builds. The last one is ViPER4Android_2.5.0.5_guitardedhero.zip.
(used the guide from here: http://andxda.blogspot.com/2016/09/how-to-install-viper4android-on-android.html)
Did someone have a success to run viper4android in selinux Enforcing mode !?
polzovotel said:
It is working for me only if I set SELinux to permissive. Tried so many diffirent builds. The last one is ViPER4Android_2.5.0.5_guitardedhero.zip.
(used the guide from here: http://andxda.blogspot.com/2016/09/how-to-install-viper4android-on-android.html)
Did someone have a success to run viper4android in selinux Enforcing mode !?
Click to expand...
Click to collapse
I have no idea about the SELinux modes but I just flashed the Deutronomy zip without changing anything else and now it works perfectly
What ROM are you using ? OxygenOS 4.5.8 ?
---------- Post added at 03:10 PM ---------- Previous post was at 02:38 PM ----------
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
I am running OxygenOS 4.5.8. Root and BusyBox is installed. I flashed this zip but still get:
Enabled: No
Status: Abnormal
The same second I change SULinux to permissive - all start working fine....
Another Method
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
henrikh1998 said:
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
Click to expand...
Click to collapse
i download from magisk download after flash i reboot but still logo oneplus!!!
guide me!
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
excuse me, do i need to be rooted? or at least unlock the bootloader?
I will be creating a thread for simplest and proper viper4android installation on OxygenOS in my free time soon.
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
Watch out in the Guides, New & Discussions section for my guide, thread to be posted soon.
ivongolia said:
excuse me, do i need to be rooted? or at least unlock the bootloader?
Click to expand...
Click to collapse
You need to unlock the bootloader and install custom recovery to install this ..
henrikh1998 said:
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
Click to expand...
Click to collapse
Tried the version in Magisk repo, but nothing happend after reboot. I can see the module in magisk but no Viper4Android-app. So I did a delete in Magisk Manager. Also, the thread is closed now.
Going to try install V4A via TWRP and his new module.
https://forum.xda-developers.com/apps/magisk/alienoidos-t3660485
Update:
Didn't work for me. No V4A-app, so I installed it manually and it tolds me to install drivers, did that reboot and it still said install drivers.
I'm on latest OOS with Magisk 13.3
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
guitardedhero said:
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
Click to expand...
Click to collapse
Thx for your share and clarification.
However, I'm really confuse by all these different realeases : Viper4Android, Viper4Arisee ViperFX, ...
I really don't know which one to install
guitardedhero said:
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
Click to expand...
Click to collapse
Dunno why but still the same problem.
Seeing the module in Magish (flashed via TWRP) but no V4A-app.
Should i dirty flash my ROM* and try again maybe?
* 4.5.8: OnePlus5Oxygen_23_OTA_013_all_1708032241_9a87b4.zi p
chrissss91 said:
Thx for your share and clarification.
However, I'm really confuse by all these different realeases : Viper4Android, Viper4Arisee ViperFX, ...
I really don't know which one to install
Click to expand...
Click to collapse
You're not alone.
ViPER4Arise is merely a themed version of ViPER4Android and ViperFX designed for the ARISE Sound Systems™ project.
ViperFX is merely the current 2.5.0.5 version of what is known previously as ViPER4Android, although it hasn't quite caught on obviously. This slight name change was a part of much bigger and impactful changes such as the official website address/domain, for example. :good:
acrylamid said:
Dunno why but still the same problem.
Seeing the module in Magish (flashed via TWRP) but no V4A-app.
Should i dirty flash my ROM* and try again maybe?
* 4.5.8: OnePlus5Oxygen_23_OTA_013_all_1708032241_9a87b4.zi p
Click to expand...
Click to collapse
Lol yeah, that is certainly not the intended outcome. At least we now know it is something on your end, most likely Magisk-related, although an existing v4a data or system installation can produce those same results.
I recommend a factory-reset in TWRP followed by an OOS-4.5.8 flash whenever it feels like a good time to do so, or at least uninstall and reinstall Magisk if nothing else.
We'll get you going, don't you worry. :good:
Comprehensive audio guide for android 8.1 and P DP1 (saves battery)
Cyan means 8.1 ONLYFor android P only, flash the magisk modules in TWRP, manager is broken with module flashing, just a temp patch from @topjohnwu
I am not responsible if you break, blow up, or destroy your device in any way
Hi XDA, this is the comprehensive guide to making the google pixel and XL have the ultimate audio mods installed while saving battery (if xposed is what you're looking for, it's under amplify)
Prerequisites
TWRP 3.2.1-x
Magisk v15.x REQUIRED
busybox (osm0sis) installed (for some mods)
Link to homeboy76's guide, look at step 9 or 10
Magisk permissive module Download
Dual stereo speakers Magisk module by kingbri(me) (AML bug fixed)
I ported Chdloc's mod into a magisk module, need to add it to the official repo, but it works very well right now
Download the zip file from this thread https://forum.xda-developers.com/pixel-xl/development/magisk-module-pixel-stereo-speakers-t3753190
Make sure you have permissive installed (check prereqs)
Flash it in Magisk
Reboot
Profit
Atmos
Download dolby unity port by @Zackptg5
Install (Universal)
Flash the permissive script in magisk
Flash the dolby zip in Magisk, It's a module
Reboot
App should be installed
IF installing with V4A, install Atmos, reboot, then V4A, then audio modification library, reboot. Everything should work
V4A steps
Install Ahiron and zackptg 5's v4a module (follow the prompts during installation)
You're done!
Ainur Sauron mod- fixes audio quality by importing qualcomm drivers as opposed to the stock android ones
Open magisk manager and navigate to downloads
search for ainur and download mark II.II
AML(audio mod lib) is installed (updated if you have v4a) by default
Reboot
If mod does not install properly, reflash the installation zip and should uninstall the mod
Battery saving
Greenify
Install the magisk module for greenify
open greenify and select NOT rooted
follow the prompts
go into settings after wizard
change mode to rooted
grant SU access
L speed (very important, this is the best battery saver app)
Install the beta from play store
Open the app and choose the AMOLED theme
choose the battery profile
turn on fstrim every boot
turn on aggressive doze (not recommended while driving, use greenify aggressive doze instead if you drive a lot)
After booting, launch L-speed and allow it to execute scripts
Hibernate Google Play services
Go into magisk manager and find the downloads section
Download sysconfig patcher, patches Google play store and other battery draining system processes so they don't drain battery
ElementalX kernel
Configure as elementalx governor with wq_powersaving enabled in the cpu menu
Amplify!
Installing Xposed framework and amplify
download xposed framework systemless here(make sure it is beta 2)
download xposed installer here
Install the xposed zip directly in magisk like a magisk module
Install xposedinstaller apk
reboot(takes a long time to boot firstrun)
open xposed installer
check to see if xposed is installed
install amplify from the PLAY STORE (not sure why it isn't installing in xposed)
activate xposed module and reboot
relaunch amplify and let it run on the default settings!
amplify configurations (updating specifics, requests avaliable in comments)...
Feel free to comment with updates to this guide, I will consider them and put them into the op!
Hi, i don´t understand the step for dual stereo speakers can you explain better? because is a confuse, thanks
TotoBerto02 said:
Hi, i don´t understand the step for dual stereo speakers can you explain better? because is a confuse, thanks
Click to expand...
Click to collapse
you download the zip file, and you copy and paste the commands while your phone is connected to the computer, "file name" is the file path where the zip is stored on your computer
UPDATE:
added ainur sauron mark II mod in OP
rewrote chdloc dual stereo speakers mod
kingbri said:
UPDATE:
added ainur sauron mark II mod in OP
rewrote chdloc dual stereo speakers mod
Click to expand...
Click to collapse
What does the rewrite of chdloc stero speakers do?
does the new version of arise work with 8.1?
willyumlu said:
does the new version of arise work with 8.1?
Click to expand...
Click to collapse
As far as I believe Arise doesn't work with 8.1 (could be wrong) But I use a magisk Module Viper4Magisk or whatever it's called will install V4A works fine I tried a Dolby Oreo zip on the Arise thread but it didn't show in app drawer so not sure if that installed correctly hope that helps :good:
Fwiw, I used this with Magisk 15.2 in a clean install of 8.1. Working without issue
https://forum.xda-developers.com/showthread.php?t=3577058
Sent from my Pixel XL using Tapatalk
liam_davenport said:
As far as I believe Arise doesn't work with 8.1 (could be wrong) But I use a magisk Module Viper4Magisk or whatever it's called will install V4A works fine I tried a Dolby Oreo zip on the Arise thread but it didn't show in app drawer so not sure if that installed correctly hope that helps :good:
Click to expand...
Click to collapse
ARISE itself works with 8.1, some of the modules are incompatible though, waiting (hunting) for a fix
Homeboy76 said:
What does the rewrite of chdloc stero speakers do?
Click to expand...
Click to collapse
It just means that I edited the guide to include a few commands I missed
It doesn't actually give you dual speakers though? My understanding is that one side is a speaker and the other is a microphone.
Sent from my Pixel XL using Tapatalk
MeetFace said:
It doesn't actually give you dual speakers though? My understanding is that one side is a speaker and the other is a microphone.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
It uses the speaker and the earpiece for audio, similar to the iphones
UPDATE 1/08/18- added dolby atmos guide, make sure to install this before any magisk audio mod
kingbri said:
UPDATE 1/08/18- added dolby atmos guide, make sure to install this before any magisk audio mod
Click to expand...
Click to collapse
Link please!
fixed
How do you get Viper to work? Which prompts are the correct ones? After installing 2.5 with everything else it gives me an I/O error on installing the driver. I'm on LineageOS 15.2 btw.
buzzywuzzy said:
How do you get Viper to work? Which prompts are the correct ones? After installing 2.5 with everything else it gives me an I/O error on installing the driver. I'm on LineageOS 15.2 btw.
Click to expand...
Click to collapse
First of all are you on aml viper? ARISE doesn't work with 8.1 and i'm talking to some of the devs about fixing this issue. I've had some experience with LOS, it may be throwing an error because of the rom or because there are some other things LOS has by default that is interfering with viper. The builds are unstable, my advice would be to switch to crDroid because it is LOS based, but is made for audio. I'm not sure what you mean by prompts but I have been hitting the vol up key both times and it works for me on the Pixel Dust rom
kingbri said:
First of all are you on aml viper? ARISE doesn't work with 8.1 and i'm talking to some of the devs about fixing this issue. I've had some experience with LOS, it may be throwing an error because of the rom or because there are some other things LOS has by default that is interfering with viper. The builds are unstable, my advice would be to switch to crDroid because it is LOS based, but is made for audio. I'm not sure what you mean by prompts but I have been hitting the vol up key both times and it works for me on the Pixel Dust rom
Click to expand...
Click to collapse
Oh okay, well I might check that out then. I just followed all the steps in the guide step by step and thats the only one i couldnt get to work. I didn't attempt ARISE at all.
buzzywuzzy said:
Oh okay, well I might check that out then. I just followed all the steps in the guide step by step and thats the only one i couldnt get to work. I didn't attempt ARISE at all.
Click to expand...
Click to collapse
I changed the v4a guide, you don't need the permissive module, maybe that's what's crashing it?
kingbri said:
I changed the v4a guide, you don't need the permissive module, maybe that's what's crashing it?
Click to expand...
Click to collapse
It didn't "crash" per se, it just wouldn't install the necessary driver after the package was installed. I'll try it with the module disabled and see if it works. Do I still need the permissive module for the other mods? Or just when they're being installed?
Hi guys!
This is my first thread so sorry if i make any mistakes, so let me know if i did any!
So as the title says, We can get viper4android on stock rom but we need to
-Have unlocked bootloader
-Magisk
-Big brain, and focus to not f. it up!
-Back up your rom and data, just in case :silly:
So, we need magisk to install Viper4android module
-Magisk: https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
-Viper4Android magisk module:
https://zackptg5.com/downloads/v4afx_v2.7.1.6.zip
-App Uninstaller:
https://redirect.viglink.com/?key=e...uninstaller-remove-package-t3423910/amp/&ref=
So first we need to install app uninstaller and give it root and memory premissions, after that we need to find any app that is associated with miusic enchacments, like in my case: MiusicFX and Sound settings/Enchacments, And uninstall them!
After it uninstalls we refuse to automaticly reboot, then we launch magisk and install viper4android module either from Modules sections and selecting Viper4Android file or just searching it in Download section
After it downloads and installs we, again not reboot and just launch the viper4android app, give it root premisions after we click to accept the messange that tells us that it will intall an driver for itself let it istall.
After the viper installs itself phone will reboot automaticly.
Viper can not work on first boot, like in my case just open the app if it not works reboot the phone and it should work fine.
And Viola, You have Viper4Android on your stock Sony rom :laugh:
If you have any problems let me know. I will try to help you :silly: