Related
Hello!
I've been searching all around about this problem, but I've not found nothing useful. I hope you can help me.
I downgraded my phone flashing a Custom Rom. Unfortunately I did not backup EFS folder before doing that, because only after I got the problem, I saw that it should have been backed up. Now my phone has a fake IMEI (after I managed to fix it. At the beginning was null/null) and I have no carrier service. It says "Not registered on network" every time I try to make a call. Now I upgraded again to the latest firmware, but still fake IMEI and not registered on network. My question is: is there any possibility to restore my original IMEI? If not, can I get registered on network with a fake IMEI? My phone details are:
Samsung Galaxy S4
Model number: GT-I9500
Baseband Version: I9500ZCUCMH1
Kernel Version: 3.4.5-3943544 [email protected] #1
Build number: LRX22C.I9500XXUHOA7
I hope in your help!
Best regards,
mfo12002
IMEI is no longer stored in the EFS folder but in hidden partitions on the device. Restore your Android 4.2.2 stock ROM and see if your IMEI is restored using that, as your baseband didn't change from Android 4.2.2 though the rest of the firmware did.
I think also my baseband changed when I downgraded it for the first time. Baseband was unknown. Then after I upgraded again, it became the one I posted here. I've also searched in samsung-updates site for stock roms but the problem is I cannot find my region stock rom. Is there any problem if I download a stock rom of a different region?
Best regards,
mfo12002
Please post the following information:
1. Model Number
2. Android Version, found by going to Settings > More > About device.
3. Firmware Version (AP, CP, CSC), found by dialing *#1234# in the dialer or by installing Phone Info from the Play Store and running it.
4. Service Provider
5. Country
6. Is the phone rooted? (Yes/No)
7. Is a custom ROM installed? (Yes/No, and the name of the ROM)
Downloading a ROM from a different region is not a good idea unless the phone is carrier unlocked, so by providing all this information in one post, even if you've already given some of it, will make it easier for me to help.
1. Model Number: GT-I9500
2. Android Version: 5.0.1
3. Firmware Version: AP=I9500XXUHOA7 ; CP=I9500ZCUCMH1 ; CSC=I9500SERHOA7
4. Service Provider: VODAFONE
5. Country: Albania
6. Is the phone rooted: Yes
7. Is a custom ROM installed: I think yes, but I don't know where to find the name.
Try this ROM instead. It's a later version of the one you're currently using. It's unbranded, so you should have no issues with carrier-added bloatware.
It still have the same problem. Not registered on network whenever I try to make a call and the notification "No service. Selected network not available" in the up-left corner.
Unless someone else on the forum has an idea I haven't thought of, have Samsung look at it. The IMEI in your S4 appears to be irretrievably gone.
Strephon Alkhalikoi said:
Unless someone else on the forum has an idea I haven't thought of, have Samsung look at it. The IMEI in your S4 appears to be irretrievably gone.
Click to expand...
Click to collapse
Ok! I will wait a little bit more if someone else has also an idea of what to do and then, if the problem still persist, I will give it to Samsung.
Thank you anyway for your time!
download lastet rom then flash it or use kies emergeny recovery
@shahram Ali: See post #6 in this thread. I directed him to the latest ROM. He flashed it and had no luck.
Does anyone else have an idea on this problem, please?
see this Post I hope it Work
http://forum.xda-developers.com/gal...-downgrade-t3168137/post62097381#post62097381
---------- Post added at 03:03 PM ---------- Previous post was at 03:01 PM ----------
Go here :
https://www.meizumobiles.fr/mises-a-jour/
It's written 4.5.3i, but when you install it, it's 4.5.4i....
Enjoy
How to install?
download the update.zip on your pc.
Transfert it on your phone.
With the file explorer click on update.zip and it start to update.
Don't forget to make a backup before, and don't forget to select eraze data at the beginning of the update (in order to have a "without bug" version)
What is the difference beentween this international version and the Chinese version? Does the international version support all languages? Thinking about converting mine, but if it is accactly the same I don't think I would bother.
Thanks
That this one is acutally an internal test firmware and is never supposed to be used as a productive rom.
last open beta : 4.5.5A
here :
https://yadi.sk/d/4qw1GRMBif6a7
https://mega.nz/#!wYUUWA5Y!D8T9AHpnrUhVNfgMpIQ-GDDbO5ufwhKMzrh9AD45vNI
links found on meizufans...
it's a "stable" Rom and supports more language, but can only be installed on INternational devices
last official 4.5.5a version (out today)
find here :
http://www.flyme.cn/firmwarelist-7.html
Firmware Details
Device: Huawei Honor 6 Plus
Model: Pine-TL10
Android: v5.1.1 Lollipop
EMUI: 3.1
Firmware: B334
Build: PE-TL10C900B334
Code: 05012WEU
Status: Official (stable)
Region: Europe
Country: Russia
Type: Full firmware image
Release Date: 22.12.2015
File Name: PE-TL10_C900B334_Firmware_Russian Federation_Channel-Others_Android 5.1.1_EMUI 3.1_05012WEU.zip
Link
How to Install
As far as this firmware’s compatibility is concerned, you can install it over a wide range of builds that carry C900 market number.
Download “PE-TL10_C900B334_Firmware….05012WEU.zip” from the aforementioned link and extract it.
Copy the extracted ‘dload’ folder to the top directory level of your phone’s external microSD card.
Disconnect the USB cable and open Updater app.
Tap menu > Local Update. Choose the full Update.app package and flash it.
Alternatively, simply reboot the device while holding Vol up + Vol down + Power simultaneously after the copying ‘dload’.
@linus2014 Thanks , What is difference between the B324 and B334 that this new version brings improvements?
PeKeT said:
@linus2014 Thanks , What is difference between the B324 and B334 that this new version brings improvements?
Click to expand...
Click to collapse
I do not have to test the device, obviously there is something new
Has anyone tried the new ROM the B334? I can say that changes have? thanks.
All Problem Solved
i have just finished updating now to this rom and as far as i check all problem in previous lolliopop rom are solved now (DT2W, choose which sim work as 3G or 4G, Gloves mode and all motion options are back) now i can enjoy lollipop till android M :laugh::laugh::laugh:
Perfect
i installed but i missed touch plus
Nobody can answer my question? Which brings changes in this new version B324 B334? someone can tell me the changes one by one? Thanks and sorry for bothering me should know that there are changes
I'm trying to install this firmware but get the following error right at the beginning of installation process:
Software install failed!
Get online help from: emui.com /emotiondownload.php?mod=restore (the link was changed as I'm unable to post the full one)
Press powerkey to continue
The device's info is:
PE-UL00
Android 4.4.2
Build number PE-UL00V100R001CHNC00B200
How can this be resolved? Can I install this firmware on my device?
Thanks.
ykun said:
I'm trying to install this firmware but get the following error right at the beginning of installation process:
Software install failed!
Get online help from: emui.com /emotiondownload.php?mod=restore (the link was changed as I'm unable to post the full one)
Press powerkey to continue
The device's info is:
PE-UL100
Android 4.4.2
Build number PE-UL00V100R001CHNC00B200
How can this be resolved? Can I install this firmware on my device?
Thanks.
Click to expand...
Click to collapse
The firmware is for this model:
Device: Huawei Honor 6 Plus
Model: Pine-TL10
Nice, where did you find this ROM?
carlthedroid said:
Nice, where did you find this ROM?
Click to expand...
Click to collapse
in certain Web sites:good:
linus2014 said:
in certain Web sites:good:
Click to expand...
Click to collapse
Can I flash it over 4.4.2 ?
downloading is very slow ..
BTW here is brand new ROM released on first this year ..
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=125
XDADEVX said:
Can I flash it over 4.4.2 ?
downloading is very slow ..
BTW here is brand new ROM released on first this year ..
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=125
Click to expand...
Click to collapse
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.
linus2014 said:
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.
Click to expand...
Click to collapse
yes it does corresponds
EDIT : cannot flash .. straight it will fail..
Edit 2 : I need B324 first ...
linus2014 said:
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.
Click to expand...
Click to collapse
weird it won't let me up .. to that latest.. only to 324 looks like it is for china only.. am in UK.. might try yours..
XDADEVX said:
weird it won't let me up .. to that latest.. only to 324 looks like it is for china only.. am in UK.. might try yours..
Click to expand...
Click to collapse
you must to have at least lollipop 5.1.1, do not know more.
linus2014 said:
you must to have at least lollipop 5.1.1, do not know more.
Click to expand...
Click to collapse
yes i said i have now 324
PeKeT said:
Has anyone tried the new ROM the B334? I can say that changes have? thanks.
Click to expand...
Click to collapse
Installed without Problem on My PE TL10
Changelog :
- motion control is back
- new bootanimation (red H)
- minor fixes ?
Hello
Need your help. Rooted and running lineage 15 os.
I need the latest baseband modem file for my 727. I guess I have mpss.th.2.0.c1.9.1-00010.
Also easiest way to back up my imei or efs?
Please guide me it's my first time i need to update as I'm having mobile connectivity issues. Thanks
Chattersking said:
Hello
Need your help. Rooted and running lineage 15 os.
I need the latest baseband modem file for my 727. I guess I have mpss.th.2.0.c1.9.1-00010.
Also easiest way to back up my imei or efs?
Please guide me it's my first time i need to update as I'm having mobile connectivity issues. Thanks
Click to expand...
Click to collapse
Here is a link to my Megadrive. If you only need the modem flash the non.hlos.bin
https://mega.nz/#F!NJ5VHS7Z!p0iO7bDiZ4kXny03EiAlWw
Use TWRP to backup EFS, it includes IMEI. You could use qpst to back up the QCN
Helpful Tip:
Search before making these kinds of post. These files have been shared thousands of times. Also, I have a clean Recovery page that has everything you need to restore your phone.
Thank you. I've flashed the non hlos modem after backing up my efs in twrp but haven't seen any difference in connectivity issues. Even my baseband version seems to be the same. Do you know if this modem is different to the one I had? Are there any other modem files I could test?
Thanks again for hosting these files. You've been a life saver
Chattersking said:
Thank you. I've flashed the non hlos modem after backing up my efs in twrp but haven't seen any difference in connectivity issues. Even my baseband version seems to be the same. Do you know if this modem is different to the one I had? Are there any other modem files I could test?
Thanks again for hosting these files. You've been a life saver
Click to expand...
Click to collapse
LeEco stopped updates at 21S, whereas int'l variants saw continued support. They sold their HQ to Yahoo, or some other company if memory serves (back in 2017). They didn't update the modem between 20S and 21S, with the latter releasing around Feb 2017.
Edit: I believe there's an EFS option in TWRP, not currently on my Pro 3.
Thanks ... for trying to help, but;
No one actually answered the questions the OP asked.
No one actually pointed OP to the latest modem in a flashable format.
So, where can one find the latest working modem for the Le Pro 3?
What version is that, and how can we tell if we have it, or not?
Also, is there a more update modem from the internations versions that work for the le pro 3
LargePrime said:
Thanks ... for trying to help, but;
No one actually answered the questions the OP asked.
No one actually pointed OP to the latest modem in a flashable format.
So, where can one find the latest working modem for the Le Pro 3?
What version is that, and how can we tell if we have it, or not?
Also, is there a more update modem from the internations versions that work for the le pro 3
Click to expand...
Click to collapse
727 only received 19, 20, and 21S. The last two share the same modem, as I already mentioned. The string listed above is the final version before LeEco USA crumbled in 2017. It ends in 00010. Check about phone section to see current one.
Otherwise, Tso linked the latest revision from his Mega account. Code and Mosimchah also have flashable 727 modems in their threads. IMG files can be installed via "fastboot" commands.
Int'l variants have newer versions of EUI up to 28S or 30S. You'll probably lose LTE+CA by flashing firmware for another variant.
https://forum.xda-developers.com/le-pro3/how-to/le-pro-3-x720-update-official-update-5-t3746794
#solved
Hello,
It would be awesome when someone could help me.
- Tonight I flashed the newest Stock rom (Security Dec 2018) with Smart Switch.
- Then I rooted the phone with TWRP + Magisk
- Then I decidet to deactivate the OEM Unlock
What would be the easiest way now, it looks that there is a new bootloader in this rom, so I can not use an older Rom? Is it true, could it be?
Can please tell me someone a Rom (what is downloadable and not behind a paywall) what I can flash with Odin or a simple other solution. My knowdledge in this kind of business is old and I nearly never use it. I tried it now for around 6 hours, please can someone tell me a noobproof strategy for a Samsung SM-G950. If it matters I´m from Germany.
Work in progress
-- Using SamFirm to download new Firmware
--- tried new German + new AT Firmware
--- both failed, is it possible that Samsung released a new version this night so my version is newer? Error Code: --- SW Rev. Check Fail (Bootloader) Device: 4, Binary: 3
I give it up for now
:crying:
pimmelpeter45 said:
Hello,
It would be awesome when someone could help me.
- Tonight I flashed the newest Stock rom (Security Dec 2018) with Smart Switch.
- Then I rooted the phone with TWRP + Magisk
- Then I decidet to deactivate the OEM Unlock
What would be the easiest way now, it looks that there is a new bootloader in this rom, so I can not use an older Rom? Is it true, could it be?
Can please tell me someone a Rom (what is downloadable and not behind a paywall) what I can flash with Odin or a simple other solution. My knowdledge in this kind of business is old and I nearly never use it. I tried it now for around 6 hours, please can someone tell me a noobproof strategy for a Samsung SM-G950. If it matters I´m from Germany.
Work in progress
-- Using SamFirm to download new Firmware
--- tried new German + new AT Firmware
--- both failed, is it possible that Samsung released a new version this night so my version is newer? Error Code: --- SW Rev. Check Fail (Bootloader) Device: 4, Binary: 3
I give it up for now
Click to expand...
Click to collapse
Your issue is you are trying to flash older firmware than what is on your phone. You need firmware with bootloader version 4 or higher. Bootloader version number is the 5th number from the right of the firmware file name. A simple check of software version can be found in settings - about phone - software info - baseband
You can search for firmware using samfirm or sammobile or updato all are free to download
spawnlives said:
Your issue is you are trying to flash older firmware than what is on your phone. You need firmware with bootloader version 4 or higher. Bootloader version number is the 5th number from the right of the firmware file name. A simple check of software version can be found in settings - about phone - software info - baseband
You can search for firmware using samfirm or sammobile or updato all are free to download
Click to expand...
Click to collapse
I already used Samfirm with 2 Firmwares from 2019. The Firmware-Package with the 4 Odin files had release date Middle December 2018, this are the newest firmware versions - In my oppinion.
The phone is also bricked right now, so I can not read out the actually firmware - I used the newest from Samsung - as written.
pimmelpeter45 said:
I already used Samfirm with 2 Firmwares from 2019. The Firmware-Package with the 4 Odin files had release date Middle December 2018, this are the newest firmware versions - In my oppinion.
The phone is also bricked right now, so I can not read out the actually firmware - I used the newest from Samsung - as written.
Click to expand...
Click to collapse
Can you still get into recovery/download modes
You could try a factory reset
Not sure what firmware your looking at but if from Germany on updato I can see at least 2 firmwares which may work with version 4 bootloader
https://updato.com/firmware-archive-select-model
Edit: For some reason link not going directly to Germany firmware list
You will have select model eg: S8
Then use filters to select region
spawnlives said:
Can you still get into recovery/download modes
You could try a factory reset
Not sure what firmware your looking at but if from Germany on updato I can see at least 2 firmwares which may work with version 4 bootloader
https://updato.com/firmware-archive-select-model
Edit: For some reason link not going directly to Germany firmware list
You will have select model eg: S8
Then use filters to select region
Click to expand...
Click to collapse
Thank you very much but this side sucks, downloadtime > 1 day
Can you please give me a filename to keep sure I take the right one.
In what specific position do I see where the Bootloader 4 is? My thinking was just take the files from end 2018 and 2019.
pimmelpeter45 said:
Thank you very much but this side sucks, downloadtime > 1 day
Can you please give me a filename to keep sure I take the right one.
In what specific position do I see where the Bootloader 4 is? My thinking was just take the files from end 2018 and 2019.
Click to expand...
Click to collapse
Samfirm will probably be the quickest.
File name convention eg: G950FXXU4CRKG the number 4 ( 5th from right ) is the bootloader revision number the higher the number the latest firmware available. You can not downgrade firmware ie: 3,2, or 1( bootloader no.)
The latest ones I can find for Germany region for the s8 Oreo:
G950FXXU4CRL3- CSC - DBT - December 14
Since I am not sure what carriers you have but CSC codes as far as I know
DBT - I can only assume unbranded(non carrier) ?
XEG ( 1&1 )
DDE ( congstar )
VIA ( 02 )
DTM ( T Mobil )
VD2 ( Vodafone )
I would use samfirm as it is quicker in downloading at least for me
In samfirm top left enter model no. SM-G950f
Underneath in region box enter ? ( I can only suggest using DBT or one of the above. )
Samfirm.will only show latest version available for your region.
spawnlives said:
Samfirm will probably be the quickest.
File name convention eg: G950FXXU4CRKG the number 4 ( 5th from right ) is the bootloader revision number the higher the number the latest firmware available. You can not downgrade firmware ie: 3,2, or 1( bootloader no.)
The latest ones I can find for Germany region for the s8 Oreo:
G950FXXU4CRL3- CSC - DBT - December 14
Since I am not sure what carriers you have but CSC codes as far as I know
DBT - I can only assume unbranded(non carrier) ?
XEG ( 1&1 )
DDE ( congstar )
VIA ( 02 )
DTM ( T Mobil )
VD2 ( Vodafone )
I would use samfirm as it is quicker in downloading at least for me
In samfirm top left enter model no. SM-G950f
Underneath in region box enter ? ( I can only suggest using DBT or one of the above. )
Samfirm.will only show latest version available for your region.
Click to expand...
Click to collapse
I already used it yesterday with DBT + VD2. I will try it again
I think the problem is that SamFirm sucks actually. I can not download manually firmwares there, maybe the automatic sucks und brings me old results.
Now I download this here: https://samfrew.com/de/amp/download/Galaxy__S8__/ke8v/VD2/G950FXXU4CRL4/G950FOVF4CRL1/
I think now I got it. I thank all people what have inspired me. It´s flashing.
Just a final question, is it possible that MOST Firmdatabases what are promoted in XDA Developers are a bunch of ****, it looks like the owner of this ****sides permanently promote their moneymakingmachines here.
Final Notice: Because I don´t trust this side, I flash the Nov Version and than flash with Samsung Tool the latest Dez Vers.