[Solved] Bricked P9 Lite - Huawei P9 Lite Questions & Answers

Hi, i have a big problem: my phone isn't starting up anymore. Before bricking my device, i was in b160(VNS L-21), then i decided to upgrade to Nougat. So i unlocked bootloader, flashed twrp etc.. Finally i got N working, after that i flashed Revolution twrp and ROM, everything fine. Then i decided to format data, just to get a "clean" ROM, but after this, my phone fell in bootloop and, i don't know why, i couldn't even get into twrp and if i try to boot into it, i just get stuck in the yellow text "Your phone is booting up..." forever. So i downloaded b160, extracted update.app and flashed system, boot, cust and recovery to try to get as stock phone was, but after that i couldn't boot into system: i just saw the yellow choices menu stuck with the same text "Your phone is booting up...", can't even see Huawei's logo. I tried to flash twrp for 6.0, but i couldn't boot into it cause it was replaced everytime by eRecovery. So i tried to install b160 from dload method and it worked but bootloader locked again and i don't have the password anymore, and after Huawei's logo there's just a black screen forever. I heard about some kind of "oeminfo.img" to flash before downgrading from N but i didn't do that cause i couldn't access twrp after formatting data. I tried to install via ota b100, b120, b130 without success, they all say incompatible firmware when i install them. I can just install b160 or b161 but they don't boot up. Please help me if u can, i'll really appreciate it

unlock you bootloader again !
flash revolution recovery b9
flash oem.info
dload b160 (Factoryreset, Bootloader locked)
Ron

RonPo said:
unlock you bootloader again !
flash revolution recovery b9
flash oem.info
dload b160 (Factoryreset, Bootloader locked)
Ron
Click to expand...
Click to collapse
I can't unlock bootloader again because i can't access system to get infos like imei etc, and i don't even have the code to unlock bootloader.. Btw, thank you for helping me

xDavi01 said:
I can't unlock bootloader again because i can't access system to get infos like imei etc, and i don't even have the code to unlock bootloader.. Btw, thank you for helping me
Click to expand...
Click to collapse
Try fastboot getvar all . Maybe it contains all the information you need
if not, dc-unlocker will do what you need. I've bricked my device and with their soft I've managed to write the full img. You should try only to unlock the bootloader service from them

You can look at the package of your P9 Lite. There should be a sticker on it with your IMEI.

Schlengge said:
You can look at the package of your P9 Lite. There should be a sticker on it with your IMEI.
Click to expand...
Click to collapse
Okay, i found it, but what about serial number and product id?

dondrog said:
Try fastboot getvar all . Maybe it contains all the information you need
if not, dc-unlocker will do what you need. I've bricked my device and with their soft I've managed to write the full img. You should try only to unlock the bootloader service from them
Click to expand...
Click to collapse
Thank you! Now i have IMEI and Serial NR, i just need Product ID. Is there a way i can get this?
Edit: I DID IT! YAY! I got bootloader unlocked, i used Huawei Product ID Generator, and typed "HUAWEI Y300-0000" instead of "HUAWEI VNS-L21" in Reformatting Lock Huawei's page, and it worked like a charm! Thank you for your help guys, you're the best

xDavi01 said:
Thank you! Now i have IMEI and Serial NR, i just need Product ID. Is there a way i can get this?
Edit: I DID IT! YAY! I got bootloader unlocked, i used Huawei Product ID Generator, and typed "HUAWEI Y300-0000" instead of "HUAWEI VNS-L21" in Reformatting Lock Huawei's page, and it worked like a charm! Thank you for your help guys, you're the best
Click to expand...
Click to collapse
for some reason that does not work for me VNS-31 :crying:

Related

Debranded my phone, now while turning it on displays a message in red...

Hello, I debranded my phone, so I'm running L21C432B130 at the moment, but when turning it on it displays the you're unlocked and can't be trusted message in Red, before it was in orange, it doesn't bother me, but once I found out I can't update to B160 via OTA, I freaked lol... Is there a way to get that OTA to work, or something?
Could you please explain, how you debranded the phone?
Acoca said:
Hello, I debranded my phone, so I'm running L21C432B130 at the moment, but when turning it on it displays the you're unlocked and can't be trusted message in Red, before it was in orange, it doesn't bother me, but once I found out I can't update to B160 via OTA, I freaked lol... Is there a way to get that OTA to work, or something?
Click to expand...
Click to collapse
Hi,
i have the same issue since 2 Weeks. Thats not the only thing, i got the massage : "Verfication failed, cant be trusted"
Phone: L31 C436 B336 SingleSim -> Debranded from T-Mobile with EUROPE TOOL from "Sebastian"
I think its a problem with the OEM Info
I Tried:
1. Flash Stock with TWRP, ERecovery -> Failed, adb and dload methode -> MM 6.0
2. Flash on b336 with TWRP, E-Recovery -> Failed, adb and dload
Normal Recovery and Erecovery didn't worked on b336, b130 only message i get is: Failed with a !
Didn't tryed to flash the OEM because in the Forums some guys says the OEM's are Specific some guys says its not Specific didn't know which i trust.
Debrand method:
get the EUROPE Tool and flashed the Singlesim OEM L31 then flashed stock b130. Since i did that i get the issues. (bootloader was unlocked)
My Phone is atm at b336 with TWRP from Nougat not rooted and bootloader unlocked
I debranded my phone using the huawei tool, can't remember the name but it wasn't the green one that opens in cmd, it literally a program
I think it's a normal message since you modified the system. Try updating to a stock firmware so that you relock the bootloader, you should be able to get rid of that message
Acoca said:
Hello, I debranded my phone, so I'm running L21C432B130 at the moment, but when turning it on it displays the you're unlocked and can't be trusted message in Red, before it was in orange, it doesn't bother me, but once I found out I can't update to B160 via OTA, I freaked lol... Is there a way to get that OTA to work, or something?
Click to expand...
Click to collapse
After downgrade to mm that message gone but in fastboot say my bootloader is unlock..so that mean that message no make diference in bootloader status right??
Someone???
I can't upgrade via OTA, it won't let me... I'm thinking maybe installing meticulus TWRP and doing a system dump may help, I wipe the whole system and just restore the dump?
Anyone have an idea?

Help please, endless bootloop

I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
What did you do exactly to end with endless bootloop?
I used the rollback file from this Thread:
https://forum.xda-developers.com/hu...torial-rollback-n-to-mm-c432-devices-t3563955
Update went fine but afterwards it ended in a bootloop. The only thing i can access is fastboot.
The weird thing is that in fastboot it says my bootlader is unlocked with red, but i cant install an recovery. Its says acess denied and ask if i'm sure my bootloader is unlocked.
And thats why im back to trying to unlock the bootloader but i cant get the product id for my phone when i can't turn in on.. seems hopeless
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
KAngelo said:
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
Click to expand...
Click to collapse
Post here IMEI+SN and i can try to get you bootloader unlock code.
gtdaniel said:
Post here IMEI+SN and i can try to get you bootloader unlock code.
Click to expand...
Click to collapse
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
maka1105 said:
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
Click to expand...
Click to collapse
I cant. Have tried all the button combinations to enter both recovery and update mode but nothing works, only vibrates and showing huawei logo. Only thing i can access is fastboot through computer
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
maka1105 said:
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
Click to expand...
Click to collapse
Thanks for the suggestion.
When i try flashing it with adb it starts writing but then says "Failed (remote: Command not allowed)
Should have installed the proper drivers but still not working.
Same thing if try flashing with the L31 toolkit. Here it says "Something went wrong! - Maybe your boot-loader is locked?"
The only thing i can think of, is trying to unlock my bootloader again and see if its work. Even though it says unlocked in fastboot mode. But for that i still need the product id for my phone which i can´t get???
KAngelo said:
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
Click to expand...
Click to collapse
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Need Correct Firmware
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
maplegsm said:
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
Click to expand...
Click to collapse
You need corect oeminfo...
i restore set in fastboot mode but i cant install twrp or any other recovery
i also need bootloader unlock code
C:\>fastboot devices
3DN7N16427001072 fastboot
C:\>fastboot flash recovery twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (27434 KB)...
OKAY [ 0.938s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.944s
C:\>
C:\>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.006s
C:\>
dc unlocker info
Found Phone : HUAWEI VNS-L31
Model : Huawei phone in fastboot mode
IMEI : 869315022035713
Serial NR. : 3DN7N16427001072
Firmware : NRD90M test-keys
IMEI:866655025440904
FB LockState: LOCKED
USER LockState: LOCKED
unlocked
Battery state: 0
delete
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
Thanks man! my bootloader is now unlocked
But now i ran in to the next problem. Im able to flash now in adb but i cant seem to enter recovery? I tried flashing many different recoveries and the button combinations to enter them but i cant?
Any idea what to do
I Have the same problem. I cannot flash any recovery and files .img How to fix that?
I can boot to fastboot.
bootloop also, can do nothing
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
denduro said:
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
Click to expand...
Click to collapse
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
i can enter fastboot, what next?
gtdaniel said:
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
Click to expand...
Click to collapse
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
denduro said:
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
Click to expand...
Click to collapse
go to service center or try DC Phoenix...
for unlock code you have to login your Huawei ID atleast 14 days...
i suppose you can't do that...

Brick P9 Lite?

Hi, I need urgent help. The phone does not boot at all, ie it stops on a black background with the words "Your device has been unlocked and can not be trusted" and starts up again from time to time. I wanted to upload B160 after an earlier rollback but the phone does not get up. Fastboot: Phone Unlocked, FRP Lock. What to do in this situation? The command "fastboot flash system system.img", "fastboot flash recovery recovery.img" give nothing. Please ask for urgent help
marek789 said:
Hi, I need urgent help. The phone does not boot at all, ie it stops on a black background with the words "Your device has been unlocked and can not be trusted" and starts up again from time to time. I wanted to upload B160 after an earlier rollback but the phone does not get up. Fastboot: Phone Unlocked, FRP Lock. What to do in this situation? The command "fastboot flash system system.img", "fastboot flash recovery recovery.img" give nothing. Please ask for urgent help
Click to expand...
Click to collapse
Rollback package brick phone who not have corect oeminfo...
Any flash of oeminfo via TWRP will go to empty field on custom.bin information where is stored localisation indicator (hw/eu, vodafone, etc)
A lot of users here encounter that...
Simply way to go back from Nougat is to write oeminfo coresponding to B130/B160 or B131/B161 stock firmware.
But after that need to flash both oeminfo/custom.bin because after writing oeminfo phone remain without localisation indicator (hw/eu)
Without that any attempt to go in Nougat again will go to NDR90-test keys...
If oeminfo/custom.bin information is flashed again phone will go fine to Nougat B370/B371,
but on Nougat somehow custom.bin information is empty again...
In B161 on Firmware Finder - Phone Info - Vendor/Country appear: hw/eu
After update to B371 on Firmware Finder - Phone Info - Vendor/Country appear: null...
Hi, yesterday I gave Huawei to service in Katowice (Poland). Today I received. Technician found the motherboard damage, probably a factory defect. They replaced the warranty. Regards

Serial Number

So my phone died and it was fixed somehow, bootloader is unlocked but OEM isn't so I'm failing to flash twrp and I can't root it, I can't do anything except flash the stock images from UPDATE.APP (extracted), the issue is that I can't get my bootloader unlock code from huawei because my serial number is now: 0123456789ABCDEF.
the original bootloader unlock code isn't working. can anybody help me? please. it's driving me nuts, oh and it's model number in hi6250
c900b161
Huawei p9 lite.:crying:
p9 lite bricked
Ngii_ said:
So my phone died and it was fixed somehow, bootloader is unlocked but OEM isn't so I'm failing to flash twrp and I can't root it, I can't do anything except flash the stock images from UPDATE.APP (extracted), the issue is that I can't get my bootloader unlock code from huawei because my serial number is now: 0123456789ABCDEF.
the original bootloader unlock code isn't working. can anybody help me? please. it's driving me nuts, oh and it's model number in hi6250
c900b161
Huawei p9 lite.:crying:
Click to expand...
Click to collapse
i have the same problem, i dont unlock my bootloader, i buy my divice in usa and i update in argentina, now the device dosen't start.
if i tried to turn on it do the huawei logo twice and then give it to me 3 options
-Download latest version and recovery
-reboot
-shuttdown
i try to download the upgrade using the first option and flash an update.app from the sd card, but it says "failed"
in fastboot and rescue mode "frp is lock" and "phone lock"
any suggestion or proces is welcome!
sorry, im from argentina and English isn't my first language
I am here to tell
I have managed to fix p9 lite phone. This phone had damaged oeminfo. And bootloader partition was damaged too.
1. Flashed factory firmware
2. Rooted with one click root without bootloader unlock
3. Installed flashify
4. Flashed twrp through flashify.
5. Flashed missing oem info
6. Flashed stock firmware.
7. Factory reset.
8. Done
Sent from my HUAWEI MT7-TL10 using XDA-Developers Legacy app
mutahharbashir said:
I am here to tell
I have managed to fix p9 lite phone. This phone had damaged oeminfo. And bootloader partition was damaged too.
1. Flashed factory firmware
2. Rooted with one click root without bootloader unlock
3. Installed flashify
4. Flashed twrp through flashify.
5. Flashed missing oem info
6. Flashed stock firmware.
7. Factory reset.
8. Done
Sent from my HUAWEI MT7-TL10 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Ohhhhhhh good explanation friend.
Can explayn to all how flash TWRP with Bootloader UNLOCKED....but w/o OEM lost, so with Serial 123456xxxxxx????
I've flashed by Professional tool, BOARD + FULL Update.App + Custom fw (vendor/country), flash perfect but phone always in Bootloop becouse "Bootloader Unlocked" and Fake Serial.
Explain please, is easy when phone isn't Bricked and can enter in "Manufacture Mode"....but with phone only in Fastboot or Recovery how you do?

My phone it's blocked into huawei start screen

Hello,
Yesterday when I Wanting to charge the battery of my phone, it's suddenly turned off, and since it is stuck on the startup screen..
I have traveled dozens of French forums in search of a solution, I come back to you now because I am a little desperate
As for my phone, he was never rooted, and I never change firnware, I do not have access to recovery, there is only fastboot mode that works
In the fastboot mode, i can read "ap-s-abnormal-n/a et phone locked frp lock".
If I understand correctly, I can not flash my phone because it is blocked..
Please help me
Do you have Access to the huawei E-Recovery? Try doing a factory reset there.
Or try to unlock your Bootloader with ADB, Flash TWRP and then Flash a customrom or another Firmware.
I hope I was able to help you.
Greetings from Germany.
TheOldMan said:
Do you have Access to the huawei E-Recovery? Try doing a factory reset there.
Or try to unlock your Bootloader with ADB, Flash TWRP and then Flash a customrom or another Firmware.
I hope I was able to help you.
Greetings from Germany.
Click to expand...
Click to collapse
I don't have access to the recovery mode too
I tried to unlock my bootloader but to no avail, all of the flash commands are concluded with a "Writing **** FAILED", and ADB does not recognize my phone
Thanks for the reply !
Noflex said:
I don't have access to the recovery mode too
I tried to unlock my bootloader but to no avail, all of the flash commands are concluded with a "Writing **** FAILED", and ADB does not recognize my phone
Thanks for the reply !
Click to expand...
Click to collapse
Unlock bootloader again
Adi5 said:
Unlock bootloader again
Click to expand...
Click to collapse
With pleasure but how ?
When I try to do this in fastboot i have this
Code:
... FAILED (remote: Command not allowed)
My only solution at this time is DC phoenix unlocker but i'm not sure about the fiability, and I don't want pay for this..

Categories

Resources