The firmware are available for two regions: UK (BTU) and the Czech Republic (O2C). You can download these Nougat-based firmware files and flash your compatible Galaxy S7 models manually (you should also be able to update your device through Samsung Smart Switch on your PC). Galaxy S7 edge firmware shouldn’t be far behind, and we will be sure to let you know once those show up in our database.
For S7 Edge : https://www.sammobile.com/firmwares/download/120208/G935FXXU1DPLT_G935FOXA1DPLT_BTU/
For S7 : https://www.sammobile.com/firmwares/download/120140/G930FXXU1DPLT_G930FOXA1DPLT_BTU/
Source: sammobile.com
will it work on dual sim s7 edge (sm-g935f)
sagor1 said:
will it work on dual sim s7 edge (sm-g935f)
Click to expand...
Click to collapse
Yes
Right .. I've been reading and researching this .. but can't find a definitive answer. Perhaps one of you gurus can assist. According to Phone INFO I have the following setup:
Bootloader/PDA/Baeband Version: G935FXXU1DPLT
CSC Version: G935FOXA1DPLT
When I try to use/install the Galaxy Gear VR, I keep getting "network error". From my research, this is linked to the CSC. Question is, how do I restore it to base CSC - without rooting?
Any help would be appreciated.
Cheers.
nice. can somebody upload the firmware somewhere else cuz i have to w8 9 hours to dld from sammobile
antenehnile said:
Yes
Click to expand...
Click to collapse
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
sagor1 said:
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
Click to expand...
Click to collapse
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
naryraza said:
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
Click to expand...
Click to collapse
Thanks Brother.
https://drive.google.com/drive/folders/0BzXXEylDgfZ0MU1EVnh3YnAtc0k
now i am downloading this (2.15gb!)....is it legit? (find it on other xda thread)
Instructions
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
is this right instruction?(sammobile)
Because i am so confused about cse,csx,btu......etc on the other thread
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
daLareid said:
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
Click to expand...
Click to collapse
I didn't try yet another SIM but duos options are there... so Insuppose you wont have any problem with it
Sent from SM-G935FD w/ TapaTalk
Related
Hello There , yesterday i got myself a Samsung Galaxy S7 edge and when i was trying to root it , something went wrong.I can boot in to the download mode.My model number is SM-G935FD so can i flash the firware which is made for SM-G935F?
Model-SM-G935FD
Regards,
Ranjit
Geekyranjit said:
Hello There , yesterday i got myself a Samsung Galaxy S7 edge and when i was trying to root it , something went wrong.I can boot in to the download mode.My model number is SM-G935FD so can i flash the firware which is made for SM-G935F?
Model-SM-G935FD
Regards,
Ranjit
Click to expand...
Click to collapse
Flash your same device model and CSC firmware, you could get on sammobile.com
or use samsung smart switch step by step https://www.youtube.com/watch?v=9QhJngOuLQ4
sa3d12 said:
Flash your same device model and CSC firmware, you could get on sammobile.com
Click to expand...
Click to collapse
Via Odin? Can i flash the SM-G935F firmare on SM-G35FD?
Yes, via Odin. Use the latest version of Odin.
Flash FD firmware only on your FD variant phone.
phone details
samsung galaxy note 4 (snapdragon 805)
5.1.1
sm-n910f
baseband version: n910fxxu1coj3
I was following a guide but then came across a few questions
I am trying to update to 6.0.1 i need some advice about which rom to install as automatic update will not work. Little unsure what region rom to use i am from Australia and this phone model is not a Australian model i am guessing i should use one of the United kingdom ones?
A google search revealed N910FXXU1COJ3 firmware version for Samsung Galaxy Note 4 (Snapdragon) (SM-N910F) from region DBT what is DBT? is there a 6.0.1 DBT?
Just make sure the model number of the firmware matches that of your device. After you have installed it onto your device and just skip through the set up process. Then perform a hard factory reset but wipe the cache partition first. You should now be able to get firmware OTA updates on your device.
Intensify85 said:
phone details
samsung galaxy note 4 (snapdragon 805)
5.1.1
sm-n910f
baseband version: n910fxxu1coj3
I was following a guide but then came across a few questions
I am trying to update to 6.0.1 i need some advice about which rom to install as automatic update will not work. Little unsure what region rom to use i am from Australia and this phone model is not a Australian model i am guessing i should use one of the United kingdom ones?
A google search revealed N910FXXU1COJ3 firmware version for Samsung Galaxy Note 4 (Snapdragon) (SM-N910F) from region DBT what is DBT? is there a 6.0.1 DBT?
Click to expand...
Click to collapse
DBT is just the CSC code, its Germany. Best and most stable I would say is to flash the 6.0.1 united kingdom BTU one.
DarkGuyver said:
Just make sure the model number of the firmware matches that of your device. After you have installed it onto your device and just skip through the set up process. Then perform a hard factory reset but wipe the cache partition first. You should now be able to get firmware OTA updates on your device.
Click to expand...
Click to collapse
I am very new to doing any of this would you happen to know of a good step by step guide?
i am not allowed to link the one i was looking at as i do not have more than 10 posts *sigh
Intensify85 said:
I am very new to doing any of this would you happen to know of a good step by step guide?
i am not allowed to link the one i was looking at as i do not have more than 10 posts *sigh
Click to expand...
Click to collapse
Download the firmware from here. Once downloaded extract it to pc.
https://www.sammobile.com/firmwares/download/111876/N910FXXS1DPK1_N910FBTU1DPI1_BTU/
Download odin from here. Version 3.10.6 seems to work better.
http://forum.xda-developers.com/showthread.php?t=2711451&page=19
On device go to software info, tap build number 7 times until developer options is available. Go on developer options and enable usb debugging.
Open odin, click AP and insert the unzipped firmware.
Turn phone off, once off hold power + down + home until phone boots to download mode.
Plug phone into pc and wait until it says added in odin with a blue COM box. Click options in odin, check auto reboot and f.reset time. Uncheck repartition.
Then just press start, it will flash the firmware and reboot. The first time it boots it may take like 20 mins or so.
Yea I'm having a similar issue too. OTA and smart switch says that my phone is up to date but I know it is not according to sam mobile. My device is sm-n190s XSG and I flashed a stock 5.1.1. Rom months ago. I know I can update via Odin if I wanted to, but how do I update the normal way if I wanted to in the future?
As you know, Oreo is out in U.K.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/download/G935FXXU2ERD5/217550/
I have G-935F and it is from Vietnam. Is it possible to flash the official U.K. release and use it without any problems?
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
kwaasung said:
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
Click to expand...
Click to collapse
Thank you for the info! Sadly I am downloading the firmware from the sammobile.com 'slug' slow too.
Havik1453 said:
Thank you for the info! Sadly I am downloading the firmware from the sammobile.com 'slug' slow too.
Click to expand...
Click to collapse
Great . Can you upload it to google drive after downloading.
kwaasung said:
Great . Can you upload it to google drive after downloading.
Click to expand...
Click to collapse
Since it is from Sammobile.com, I don't think it is right to upload it to other site because it's their files. You can get Premium Service for faster downlad tho.
kwaasung said:
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
Click to expand...
Click to collapse
How about Galaxy S7 edge SM-G935FD?
can as well? TQ..
komok said:
How about Galaxy S7 edge SM-G935FD?
can as well? TQ..
Click to expand...
Click to collapse
yes you can , i have been flashing single sim firmware to dual sim s7 edge.
both sim works .
I can't align the BTU CSC once I installed the firmware for future OTA updates. I did everything I used to do but I keep having the ITV CSC.
I tried installing the firmware with Odin 3 times...
Tommolo said:
I can't align the BTU CSC once I installed the firmware for future OTA updates. I did everything I used to do but I keep having the ITV CSC.
I tried installing the firmware with Odin 3 times...
Click to expand...
Click to collapse
Dial *#1234# if your csc is "OXA" you are fine its multi csc from different countries. I have ITV csc too by the way.
meawww said:
Dial *#1234# if your csc is "OXA" you are fine its multi csc from different countries. I have ITV csc too by the way.
Click to expand...
Click to collapse
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
Maybe it will get ota from multi csc too as OXA or maybe it will fixed ota from current ITV. We will find out if theres an ota update to any of those country listed in OXA csc which are france uk germany italy poland
I got same problem with You guys but i found solution, i downloaded firmware TCL portugal install via odin boot up to first settings turn off my phone and go to recovery mode again wipe cache and data, go to download mode and install BTU. If You wanna faster download via samobile use tool samfirm and it will be faster
https://forum.xda-developers.com/showpost.php?p=76398677&postcount=4037
use this link folks and download official oreo firmware BTU and install it through ODIN.
Thats it
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
it´s because of Mulit-CSC.. when you don´t wipe and factory reset, you stay on your CSC.. so ITV.. when you want BTU ota´s, you need to wipe your S7 complete including factory reset
raider2k9 said:
it´s because of Mulit-CSC.. when you don´t wipe and factory reset, you stay on your CSC.. so ITV.. when you want BTU ota´s, you need to wipe your S7 complete including factory reset
Click to expand...
Click to collapse
That's what I did. Three times. With Odin and from the stock recovery too.
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
Since BTU and ITV are in same OXA CSC file you must first flash a non OXA firmware like NEE , EUR, DBT and then reflash the BTU firmware.
OXA is multi csc file. ALL in same group wont change from ITV.
Tommolo said:
That's what I did. Three times. With Odin and from the stock recovery too.
Click to expand...
Click to collapse
I forgot the important Point so far.. you Need to boot first time with simcard for BTU region to set CSC to BTU.. because multi-CSC changes CSC after wipe and only when simcard from the other Country is inserted
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
DBT is a OXA Firmware so far.. on my S8 it was the Point.. S7 DBT isn´t OXA?
how to root official oreo rom my samsung helath not work , i need one way to root official oreo uk , please help me
I can't flash with odin
Good afternoon, someone can help me, try to flash the rom btu and the odin tells me pass but when restarting there is no change of android. Now I have android 7 region DBT and probe flashing with home_csc and csc and with the same thing happens, no change. Greetings and thanks
Use Odin 3.13 and uncheck F. Reset Time.
I had XEO csc. I've used HOME_CSC_OXA.
Installation was a success. It didn't erase my data. 0x0
Will see how it goes
Hi guys finally samsung realesed oreo update for russian 935fd model last night and russia support volte so can i flash that firmware on my india 935fd model ?
Astra441 said:
Hi guys finally samsung realesed oreo update for russian 935fd model last night and russia support volte so can i flash that firmware on my india 935fd model ?
Click to expand...
Click to collapse
Yes. Just use HOME_CSC of latest INS firmware.
ajhavery said:
Yes. Just use HOME_CSC of latest INS firmware.
Click to expand...
Click to collapse
in ins still noguat mate but russia now have oreo thats why i am asking
Astra441 said:
in ins still noguat mate but russia now have oreo thats why i am asking
Click to expand...
Click to collapse
Yes. You can use Nougat CSC with OREO AP, BL and CP.
Hey what's up can you install it? How do you feel with battery? Thanks
Astra441 said:
in ins still noguat mate but russia now have oreo thats why i am asking
Click to expand...
Click to collapse
hey did anyone install the Russian firmware ? Does it support volte ?
_HUNT3R_ said:
hey did anyone install the Russian firmware ? Does it support volte ?
Click to expand...
Click to collapse
i am unable to download it as i dnt find any fast links till now
Astra441 said:
i am unable to download it as i dnt find any fast links till now
Click to expand...
Click to collapse
I am downloading it from sammobile right now . I'll install it later today .
---------- Post added at 10:00 AM ---------- Previous post was at 09:56 AM ----------
Astra441 said:
Hi guys finally samsung realesed oreo update for russian 935fd model last night and russia support volte so can i flash that firmware on my india 935fd model ?
Click to expand...
Click to collapse
Are you sure Russia has Volte ??
Use this link for faster download.
http://www.mediafire.com/file/oah25feh6x4m3g5/G935FXXU2ERE8_G935FOXE2ERE8_SER.zip
Don't install the Russian S7 Edge firmware if you expect volte works .Volte Is Not Working. Although i did notice that the phone works a bit smoother than it does normally .
_HUNT3R_ said:
Don't install the Russian S7 Edge firmware if you expect volte works .Volte Is Not Working. Although i did notice that the phone works a bit smoother than it does normally .
Click to expand...
Click to collapse
I already mentioned it. Flash HOME_CSC of INS firmware.
See the screenshot.
ajhavery said:
I already mentioned it. Flash HOME_CSC of INS firmware.
See the screenshot.
Click to expand...
Click to collapse
Home_csc of INS Android 7.0 works with the Russian Firmware or UK firmware ?
_HUNT3R_ said:
Home_csc of INS Android 7.0 works with the Russian Firmware or UK firmware ?
Click to expand...
Click to collapse
Yes. CSC is independent of AP or BL choice. I've tried it with both BTU and SER firmware and works with both.
AP - Oreo
BL - OREO
CP - OREO (Can try Nougat INS too for Indian modem. I haven't tried it though)
CSC - Nougat INS HOME_CSC
ajhavery said:
yes. Csc is independent of ap or bl choice. I've tried it with both btu and ser firmware and works with both.
Ap - oreo
bl - oreo
cp - oreo (can try nougat ins too for indian modem. I haven't tried it though)
csc - nougat ins home_csc
Click to expand...
Click to collapse
bro it failed , please help
_HUNT3R_ said:
bro it failed , please help
Click to expand...
Click to collapse
You need ODIN 3.13.1 to be able to flash this. And original or equivalent Samsung Cable.
Previous versions of ODIN don't work.
Use the below setup:
AP - AP_G935FXXU2ERE8_CL13438344_QB18102056_REV00_user_low_ship_meta.tar.md5
BL - BL_G935FXXU2ERE8_CL13438344_QB18102056_REV00_user_low_ship.tar.md5
CP - CP_G935FXXU2ERD6_CP9567704_CL13438344_QB17934979_REV00_user_low_ship.tar.md5
CSC - HOME_CSC_ODD_G935FODD2DRAG_CL12785220_QB16560289_REV00_user_low_ship.tar.md5
The above setup worked for me thrice.
ajhavery said:
You need ODIN 3.13.1 to be able to flash this. And original or equivalent Samsung Cable.
Previous versions of ODIN don't work.
Use the below setup:
AP - AP_G935FXXU2ERE8_CL13438344_QB18102056_REV00_user_low_ship_meta.tar.md5
BL - BL_G935FXXU2ERE8_CL13438344_QB18102056_REV00_user_low_ship.tar.md5
CP - CP_G935FXXU2ERD6_CP9567704_CL13438344_QB17934979_REV00_user_low_ship.tar.md5
CSC - HOME_CSC_ODD_G935FODD2DRAG_CL12785220_QB16560289_REV00_user_low_ship.tar.md5
The above setup worked for me thrice.
Click to expand...
Click to collapse
means if i use home csc so this give me volte main thing i want ...... as samsung delay more days to provide firmware to india
Galaxy S8 Plus G955F SBA Firmware is here.
It's the official stock Android Pie.
This is the German Firmware. Can be flashed on any Galaxy S8 Plus with the model number G955F/FD regardless of region.
Flash it via Odin. Load the AP, BL, CP, CSC or HOME_CSC file in Odin to flash.
CSC will wipe the phone, Home_CSC will not wipe.
Here are the firmware details:
PDA: G955FXXU4DSBA
CSC: G955FOXM4DSBA
Region: Germany DBT
Build Date: Fri, 15 Feb 2019
Download: G955FXXU4DSBA_G955FOXM4DSBA_DBT.ZIP
Those of you who are don't know how to flash this ROM, follow this guide to flash it.
All I want you to do is to hit the thanks button. enjoy!
Anybody tired this? Any comments?
This works on exynos version?
LU SONEVESSO said:
This works on exynos version?
Click to expand...
Click to collapse
Yes its for Exynos.
[email protected] said:
Anybody tired this? Any comments?
Click to expand...
Click to collapse
Yep, it works. Followed OP's steps and voila!
I chose Home CSC and all my apps and datas are intact.
raykewl said:
Yep, it works. Followed OP's steps and voila!
I chose Home CSC and all my apps and datas are intact.
Click to expand...
Click to collapse
Which region are you from? If not DBT, does your Samsung Pay still works?
I am currently running a Pie ROM on my S8 plus can I directly install it on my device or I have to first install the Oreo firmware?
Samsung Galaxy S8 Plus official Android O Firmware
Firmware Details:
PDA: G955FXXU4DSBA
CSC: G955FOXM4DSBA
Region: Germany DBT
Build Date: Fri, 15 Feb 2019
Full Speed Direct Download Link with Pause Option :
Download Galaxy S8+ Official 9.0 Firmware
(Note: You can install this firmware on both SM-G955F & SM-G955FD)
Raja37 said:
I am currently running a Pie ROM on my S8 plus can I directly install it on my device or I have to first install the Oreo firmware?
Click to expand...
Click to collapse
You can flash directly.
I don't known why, but when I try to use Samsung pass, it says that my galaxy are rooted (what is a lie) and I can't use, and samsung pay isn't working too...
Have something that I can do to surpass this??? Plz help me
LU SONEVESSO said:
I don't known why, but when I try to use Samsung pass, it says that my galaxy are rooted (what is a lie) and I can't use, and samsung pay isn't working too...
Have something that I can do to surpass this??? Plz help me
Click to expand...
Click to collapse
What region is your s8+?
gpmg762 said:
What region is your s8+?
Click to expand...
Click to collapse
Brazil
LU SONEVESSO said:
Brazil
Click to expand...
Click to collapse
If your s8+ csc is ZTO (Brazil), i think it will probably be okay since it's included in the OXM multi-csc.
https://forum.xda-developers.com/showpost.php?p=71668023&postcount=2
What is the procedure for manual installation? I have not root, not twrp. thanks. My current version is G955FXXS4CRLB
My CSC is EVR (EE UK). Can I flash this using "home csc" without wiping the phone? What CSC will I have if I do this? (I'd prefer to be on DBT because it usually gets faster updates and I don't have time to wipe my phone now).
radospol said:
What is the procedure for manual installation? I have not root, not twrp. thanks. My current version is G955FXXS4CRLB
Click to expand...
Click to collapse
Odin
LU SONEVESSO said:
Odin
Click to expand...
Click to collapse
I have added the guide for ROM installation now.
Any feedback yet ? Is it worth to flash ?
As I had read, on Pie there are a lot of functions from Oreo were removed.
Is there on Pie surround shot for VR in camera app ?
Is root or debloat possible ? In beta versions there was a problem rooting and removing bloatware.
deconectat said:
My CSC is EVR (EE UK). Can I flash this using "home csc" without wiping the phone? What CSC will I have if I do this? (I'd prefer to be on DBT because it usually gets faster updates and I don't have time to wipe my phone now).
Click to expand...
Click to collapse
You will probably end up with BTU since EVR is not included in multi-csc and wipe.
Can anyone please make flashable zip for stock recovery? Currently got no access to pc.. Thanks in advance