Hello my friends,
Today I will show you how to get the fastest nougat on your S7 / S7 EDGE.
Firmware flashen on the SM-G930FD / SM-G935FD at your own risk.
I accept no liability if your device does not work anymore!
This firmware can also be flashed on an S7 Edge SM-G935FD.
But this only happened at your own risk.
Download to Samfirm v 3.6 first.
Then open SamFirm and enter the following:
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
http://www.chip.de/downloads/Odin3_12992520.html
For Mac:
http://techbeasts.com/download-odin-jdoin3-mac/
Fast Downloadlink for SM-G935F:
https://mega.nz/#!rFIlWA5S!h4JrAyNxJWbH8hqB9Co_7OvMcdiykfMFtU6I8XP4cwc
Fast Downloadlink for SM-G930F:
https://mega.nz/#!mc5CRByS!e6nXnqLQTkchX2dAkvadmQTBEuPC0ikYvZYb7l_oZ98
For the S7 G930F:
Model: SM-G930F
Region: BTU
AutoMode
For the S7 EDGE G935F
Model: SM-G935F
Region: BTU
AutoMode
In Ordin:
SM-G930F:
BL: BL_G930FXXU1BPLB_CL9689434_QB11912473_REV00_user_low_ship.tar
AP: AP_G930FXXU1BPLB_CL9689434_QB11912473_REV00_user_low_ship.tar
CP: CP_G930FXXU1BPJJ_CL9519568_QB11350284_REV00_user_low_ship.tar
CSC: CSC_BTU_G930FBTU1BPK3_CL9952030_QB11729675_REV00_user_low_ship.tar
SM-G935F:
BL: BL_G935FXXU1BPLB_CL9689434_QB11912473_REV00_user_low_ship.tar
AP: AP_G935FXXU1BPLB_CL9689434_QB11912473_REV00_user_low_ship.tar
CP: CP_G935FXXU1BPJJ_CL9519568_QB11350284_REV00_user_low_ship.tar
CSC: CSC_BTU_G935FBTU1BPK3_CL9952030_QB11729675_REV00_user_low_ship.tar
Not the HOME_CSC !!!
There you will see Android 6.0.1. This download and unpack.
Back up your data and use Odin Flashing.
Device setup and updates.
Update Download and install.
Have fun with it
It could be that the update on Android 7.0 is no longer available since Samsung has stopped the roll-out because of too many bugs.
Whether this message is something I can not confirm. I got the update today. Please tell me if you got the update this way.
Thank you!!
can i flash this if i have a Canadian s7 edge with the qualcomm processor?
jatt101 said:
can i flash this if i have a Canadian s7 edge with the qualcomm processor?
Click to expand...
Click to collapse
No, it does not work. This is only for the Exynos devices
LionHunter95 said:
No, it does not work. This is only for the Exynos devices
Click to expand...
Click to collapse
How do i know what firmwares are for qualcomm version?
jatt101 said:
How do i know what firmwares are for qualcomm version?
Click to expand...
Click to collapse
Look under software info what is there. If there is G930F / G935F this method works. Should there be something different then this does not work
I guess that this does wipe data ?
How to do without wipe ?
LionHunter95 said:
No, it does not work. This is only for the Exynos devices
Click to expand...
Click to collapse
The official Canadian version is the Exynos device! unless you bought the unlocked version!
arc_u said:
I guess that this does wipe data ?
How to do without wipe ?
Click to expand...
Click to collapse
If you download this firmware, you have to flash this by Odin. If you flashst them all your data will be lost. So before everything save and then flash.
LionHunter95 said:
No, it does not work. This is only for the Exynos devices
Click to expand...
Click to collapse
itzik_man said:
The official Canadian version is the Exynos device! unless you bought the unlocked version!
Click to expand...
Click to collapse
How do i tell? it was sent to me when i returned my note 7. I got an unlock code with it, so i am not sure.
jatt101 said:
How do i tell? it was sent to me when i returned my note 7. I got an unlock code with it, so i am not sure.
Click to expand...
Click to collapse
Download from Play store AIDA64!
itzik_man said:
Download from Play store AIDA64!
Click to expand...
Click to collapse
Thank you bro! You were correct!
The 7 update isnt showing up for me after the update...
I went back to stock firmware because I had rooted my phone with a rom so I went back to stock with a 6.0.1 mm firmware. A lot of people from the uk are getting this update although I haven't yet haha?
The official one that is.
SeanIsHerko said:
I went back to stock firmware because I had rooted my phone with a rom so I went back to stock with a 6.0.1 mm firmware. A lot of people from the uk are getting this update although I haven't yet haha?
The official one that is.
Click to expand...
Click to collapse
If your device is rooted and you do the original firmware flashing, your device will be officiel again
LionHunter95 said:
If your device is rooted and you do the original firmware flashing, your device will be officiel again
Click to expand...
Click to collapse
Yeah it "Was" rooted then I flashed the original firmware back on it although forgot to go into Super Su to unroot but the flash did it for me but then tripped knox lol.
Yeah I thought I was on official again but my mate has got the official update from nougat and I haven't lol (We live close)
SeanIsHerko said:
Yeah it "Was" rooted then I flashed the original firmware back on it although forgot to go into Super Su to unroot but the flash did it for me but then tripped knox lol.
Yeah I thought I was on official again but my mate has got the official update from nougat and I haven't lol (We live close)
Click to expand...
Click to collapse
According to a few websites, the official update was stopped because of bugs again. Wait a bit and update the OTA again. Actually, this should work. If it does not go with you Samsung has stopped the update again.
The update is about 1.2 GB, and, especially in China, ran into some bugs initially, and was reportedly pulled before being re-released today. As to when will it hit the non-Exynos versions sold on US carriers, remains to be seen, but the wait shouldn't be long now that the beta testing phase is done and dusted. So ???
Some quick questions please..
1. What does BTU mean?
2. Will i be able to install this on 935fd without any probs?
can any one help me....I am from italy using s7 edge with model (SM-G935F )......if I flashed BTU Firmware from UK will void warrenty
Related
I have S6 Edge+ South East Europe software version. Can I install UK version? Could it trigger Knox or make some problem in bootloader or something else. I did this on Note 4, but I have forgot how it went. Last year.
stefan063 said:
I have S6 Edge+ South East Europe software version. Can I install UK version? Could it trigger Knox or make some problem in bootloader or something else. I did this on Note 4, but I have forgot how it went. Last year.
Click to expand...
Click to collapse
If is the same model you don't have problems, and if ios use a sammobile firmwere don't afecta knox.
jah2110 said:
If is the same model you don't have problems, and if ios use a sammobile firmwere don't afecta knox.
Click to expand...
Click to collapse
Thank you. Yes, I want to install UK software from SAMMOBILE site. For same model of course . So, no problem?!
stefan063 said:
Thank you. Yes, I want to install UK software from SAMMOBILE site. For same model of course . So, no problem?!
Click to expand...
Click to collapse
That's corrects... no problem.
What about csc? It remains as it was in original rom,right? Then OTA wont work,yes?
Up for ota question.
Cant you go back another rom if security version is lower?
And when you go back, will ota work?
if you intall another ROM the phone will rssult having the original CSC and the new one so OTA won't work.
to have the new CSC stick, you need to hard reset afte flashing, i read somewhere
Hello guys.
It's been 2 months since samsung started rolling out MM update for SGS6E+, and most of them (no carrier locked) already received it.
I have G928I, not locked, not branded, bought in official Samsung store in Singapore, but still no sign of MM.
Is it normal for phones in this region to receive update months after others do?
darki73 said:
Hello guys.
It's been 2 months since samsung started rolling out MM update for SGS6E+, and most of them (no carrier locked) already received it.
I have G928I, not locked, not branded, bought in official Samsung store in Singapore, but still no sign of MM.
Is it normal for phones in this region to receive update months after others do?
Click to expand...
Click to collapse
Still waiting SM-G928I Australia
darki73 said:
Hello guys.
It's been 2 months since samsung started rolling out MM update for SGS6E+, and most of them (no carrier locked) already received it.
I have G928I, not locked, not branded, bought in official Samsung store in Singapore, but still no sign of MM.
Is it normal for phones in this region to receive update months after others do?
Click to expand...
Click to collapse
I have update my G928I with a G928G firmware and then install a custom Marshmallow rom without any problems.
puns1 said:
I have update my G928I with a G928G firmware and then install a custom Marshmallow rom without any problems.
Click to expand...
Click to collapse
Sorry mate, Didn't get, you mean G928G firmware is compatible with G928I, will odin fail?
ironeagle said:
Sorry mate, Didn't get, you mean G928G firmware is compatible with G928I, will odin fail?
Click to expand...
Click to collapse
The firmware I flash with odin is INS-G928GDDU2BPC4-20160321182106 with my G928I and it work flawless.
puns1 said:
The firmware I flash with odin is INS-G928GDDU2BPC4-20160321182106 with my G928I and it work flawless.
Click to expand...
Click to collapse
Will try. Thanks.
puns1 said:
I have update my G928I with a G928G firmware and then install a custom Marshmallow rom without any problems.
Click to expand...
Click to collapse
Well the thing is, i still want to be able to use features such as Deep Sleep and Knox.
Will it trip my knox kounter, or will the "firmware swap" work just as normal update?
darki73 said:
Well the thing is, i still want to be able to use features such as Deep Sleep and Knox.
Will it trip my knox kounter, or will the "firmware swap" work just as normal update?
Click to expand...
Click to collapse
I am able to odin G928GUBU2BPD2_G928GUUB2BPD2_BVO on my SM-G928I without triping knox.
China got the nougat update but Hong Kong yet to get the update what's the difference between this two.
Same for Luxemburg ?
yea samsung like to split different country for updates, look at the 935 variant update in Europe...
Fahimxda said:
what's the difference between this two.
Click to expand...
Click to collapse
That's a good one.
Though it is irrelevant for Samsung's update policy the Mainland edition need to comply with Mainland restrictions and you won't find anything Google related in the software but a lot of other crap.
If you don't want to wait download a nougat rom for Snapdragon of your choice and use the HOME_CSC of the latest rom for your area though I would say it cannot be much longer until you get the update as well.
andiling said:
That's a good one.
Though it is irrelevant for Samsung's update policy the Mainland edition need to comply with Mainland restrictions and you won't find anything Google related in the software but a lot of other crap.
If you don't want to wait download a nougat rom of your choice and use the HOME_CSC of the latest rom for your area though I would say it cannot be much longer until you get the update as well.
Click to expand...
Click to collapse
I'm in the same boat; have a HongKong S7 edge 128 with Snapdragon.
Can you confirm that it is ok to use ODIN withNougat 7.0 from another country for BL,AP and CP and use the HOME_CSC from HongKong fron december that was on 6.0.1 Marshmallow? I'm speaking about official firmwares on a non-rooted phone and do not want to trigger Knox
FrenchJo67 said:
I'm in the same boat; have a HongKong S7 edge 128 with Snapdragon.
Can you confirm that it is ok to use ODIN withNougat 7.0 from another country for BL,AP and CP and use the HOME_CSC from HongKong fron december that was on 6.0.1 Marshmallow? I'm speaking about official firmwares on a non-rooted phone and do not want to trigger Knox
Click to expand...
Click to collapse
Just wait for this month end mostly Will get it.
Knox won't be triggered in any case.
I did not try out this specific combination but never had a problem flashing Nougat (beta) BTU WHICH YOU SHOULD NOT USE SINCE IT IS FOR EXYNOS with various Marshmallow HOME_CSC.
For safety's sake make a backup first.
just use u.s. version and apply hk csc and you get the same thing if you remove carrier bloatware.
Thank you all. I will see how my patience meter does...Might try and will be careful to use a Snapdragon version.
On a side note if you use a mixed set of firmware files you won't receive OTA updates. It would be recommended to flash the complete set of the Hong Kong Nougat version (again with HOME_CSC) afterwards once released.
Fahimxda said:
what's the difference between this two.
Click to expand...
Click to collapse
Actually all localized services are the difference. I'm not sure of course but this is the only reason I can think about.
Waiting for HK update as well, while friends having Chinese version got update.
If we're lucky we'll get Android 7 before Android 8 comes out, fingers crossed
I am actually downloading OTA update now, though very slow...
JohnGReco said:
Same for Luxemburg
Click to expand...
Click to collapse
This is ridiculous.. still waiting also...
Same here. Half way through
Went faster via sammobile and Odin...
I'm still trying to download it, keeps failing..................£640 phone and this is the service we get from Samsung
Bart3n said:
This is ridiculous.. still waiting also...
Click to expand...
Click to collapse
and we can't just use some other Firmware. Check here
It might disable S-Health, Knox... (not trip, just disable - due to some Policy update)
JohnGReco said:
and we can't just use some other Firmware. Check here
It might disable S-Health, Knox... (not trip, just disable - due to some Policy update)
Click to expand...
Click to collapse
That's not true... i am running Vodafone software and everything works.. but i would rather use the lux version because of no bloatware
Bart3n said:
That's not true... i am running Vodafone software and everything works.. but i would rather use the lux version because of no bloatware
Click to expand...
Click to collapse
Did you check the link mate?
I used the Greek one (EUR) my self (AP only), but then i installed the CSC as well - then it went downhill.
hi everyone, I just bought a s7 edge from internet the thing is I'm french and received an at&t model ( what a mistake I wanted the exynos ) well the phone works but can't update it how could a I do to put nougat and later oreo if it come to this device? is it possible to take out that at&t and just have a rom s7. (sorry for my english I didn't find it in french) thanks a lot for your anwser.
android:6.0.1
baseband:G935AUCS4APK1
Download this U firmware and install using odin. It's a universal firmware for the AT&T S7 Edge, does not have any AT&T crap on it. It also doesn't have VoLTE & wifi calling, but who cares, it works just fine. I have an AT&T S7 Edge and I'm using this myself. I love it and it always get the OTA updates fast. This is the latest firmware with the January security patch. Enjoy and hope this helps. This is Android 7.0 Nougat
935U Firmware G935UUES4BRA1 for AT&T S7 Edge
Thanks I will try this this week end.
ytaida said:
Download this U firmware and install using odin. It's a universal firmware for the AT&T S7 Edge, does not have any AT&T crap on it. It also doesn't have VoLTE & wifi calling, but who cares, it works just fine. I have an AT&T S7 Edge and I'm using this myself. I love it and it always get the OTA updates fast. This is the latest firmware with the January security patch. Enjoy and hope this helps. This is Android 7.0 Nougat
935U Firmware G935UUES4BRA1 for AT&T S7 Edge
Click to expand...
Click to collapse
I tried it but odin tells me model dismatch which it's a bit weird i used odin 3.12.3. how did you flash it ?
n1n158300 said:
I tried it but odin tells me model dismatch which it's a bit weird i used odin 3.12.3. how did you flash it ?
Click to expand...
Click to collapse
Follow the instructions on this guide but use the Nougat G935UUES4BRA1 firmware you downloaded;
Samsung SM-935U firmware install guide on SM-935A device
I used this version of ODIN by princecomsy
Hope this helps.
ytaida said:
Follow the instructions on this guide but use the Nougat G935UUES4BRA1 firmware you downloaded;
Samsung SM-935U firmware install guide on SM-935A device
I used this version of ODIN by princecomsy
Hope this helps.
Click to expand...
Click to collapse
Thanks I will try it later And let you know
ytaida said:
Follow the instructions on this guide but use the Nougat G935UUES4BRA1 firmware you downloaded;
Samsung SM-935U firmware install guide on SM-935A device
I used this version of ODIN by princecomsy
Hope this helps.
Click to expand...
Click to collapse
Thanks man it works perfectly with princecomsy Odin
i need help
my phone is also us version and its still marshmallow. can i try this one?
and do i need to back up first?
ytaida said:
Follow the instructions on this guide but use the Nougat G935UUES4BRA1 firmware you downloaded;
Samsung SM-935U firmware install guide on SM-935A device
I used this version of ODIN by princecomsy
Hope this helps.
Click to expand...
Click to collapse
Hi I coming to you again just to know if you faced the same issue than me. I just realized that my GPS is not working anymore since then. If you know anything about it. Thanks
n1n158300 said:
Hi I coming to you again just to know if you faced the same issue than me. I just realized that my GPS is not working anymore since then. If you know anything about it. Thanks
Click to expand...
Click to collapse
Everything is working on my AT&T Galaxy S7 Edge, including my GPS running the 935U firmware. By the way the firmware was just updated to G935UUES4BRC1 March security patch.
ytaida said:
Everything is working on my AT&T Galaxy S7 Edge, including my GPS running the 935U firmware. By the way the firmware was just updated to G935UUES4BRC1 March security patch.
Click to expand...
Click to collapse
Yeah he did the update OTA which it's nice that's mean I will get the next one much easier. Ok i actually wanted to wipe cache so I restart on recovery mode. And it just put me a yellow triangle and it was write no command :/ I don't think that's normal I have to find something but thanks
ytaida said:
Everything is working on my AT&T Galaxy S7 Edge, including my GPS running the 935U firmware. By the way the firmware was just updated to G935UUES4BRC1 March security patch.
Click to expand...
Click to collapse
Is it normal that the download to your file is very slow?
Darklight_93 said:
Is it normal that the download to your file is very slow?
Click to expand...
Click to collapse
The latest firmware update is G935UUEU4BRD1 April Security Patch. I always update OTA via the software update in the setting menu and it downloads quick.
ytaida said:
The latest firmware update is G935UUEU4BRD1 April Security Patch. I always update OTA via the software update in the setting menu and it downloads quick.
Click to expand...
Click to collapse
Can someone help me out? I am trying to install the last update you just posted but I am not able to do that... I can't find the PIT file... any help?
Darklight_93 said:
Can someone help me out? I am trying to install the last update you just posted but I am not able to do that... I can't find the PIT file... any help?
Click to expand...
Click to collapse
What firmware version are you on right now? If you want to go to SM-G935U then you have to start with the base of January and then update from there via OTA.
n1n158300 said:
Yeah he did the update OTA which it's nice that's mean I will get the next one much easier. Ok i actually wanted to wipe cache so I restart on recovery mode. And it just put me a yellow triangle and it was write no command :/ I don't think that's normal I have to find something but thanks
Click to expand...
Click to collapse
Just so there's no confusion here, no one person "updated it OTA". What you have is an official U rom which fetches updates whenever Samsung pushes them out.
Aaron78 said:
What firmware version are you on right now? If you want to go to SM-G935U then you have to start with the base of January and then update from there via OTA.
Click to expand...
Click to collapse
I am at the 2016 update...
Darklight_93 said:
I am at the 2016 update...
Click to expand...
Click to collapse
If your on the U version, then go to Settings then Software Update and then tap Download Updates Manually. It should force an update. If not, download the updates from Sammobile and flash them using Odin.
ytaida said:
The latest firmware update is G935UUEU4BRD1 April Security Patch. I always update OTA via the software update in the setting menu and it downloads quick.
Click to expand...
Click to collapse
Thank you! My S7 Edge ATT SM-G935A is on Marshmallow 6.0.1 now. Can I flash directly to the latest version or I need to go from the base on first and go 1-by-1 up to the latest?
Stock Oreo N950USQU3CRC2 Odin files for AT&T NOTE 8
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Oreo 8.0
Security Patch Level: March 1st, 2018
Product Code: ATT
PDA: N950USQU3CRC2
CSC: N950UOYN3CRC2
Download here: N950USQU3CRC2
DOWNLOAD for ODIN:
ODIN v3.13.1
Does this work for Unlocked?
DELETED
Pardon my ignorance. I'm about to buy a AT&T Note 8 today, but AT&T isn't my carrier (as I'm in Jamaica).
Is this the latest firmware for this device? My OCD requires me to have the latest OTA available so I don't have to keep wiping my device each time I sideload it.
Anonymously_Unknown said:
Pardon my ignorance. I'm about to buy a AT&T Note 8 today, but AT&T isn't my carrier (as I'm in Jamaica).
Is this the latest firmware for this device? My OCD requires me to have the latest OTA available so I don't have to keep wiping my device each time I sideload it.
Click to expand...
Click to collapse
The latest is N950USQS4CRE1.
Can I use this to go from CQLB to CRC2?
@bboii86
jellybear456 said:
Can I use this to go from CQLB to CRC2?
@bboii86
Click to expand...
Click to collapse
Yes you can. There's a newer firmware. The latest is CRE1. I have them, if needed.
bboii86 said:
Yes you can. There's a newer firmware. The latest is CRE1. I have them, if needed.
Click to expand...
Click to collapse
Is CRE1 an official build? Will I be able to receive future OTAs on that version?
jellybear456 said:
Is CRE1 an official build? Will I be able to receive future OTAs on that version?
Click to expand...
Click to collapse
Yes, CRE1 is the official build. Yes, you will receive OTA updates. Here's the link to the Odin files of CRE1
https://androidfilehost.com/?fid=890278863836287962
Can you still flash the unlocked firmware on the att note 8 after the oreo update?
I switched carriers and even though they told me the phone was compatible I cannot get it to work.
luke24 said:
Can you still flash the unlocked firmware on the att note 8 after the oreo update?
I switched carriers and even though they told me the phone was compatible I cannot get it to work.
Click to expand...
Click to collapse
Yes, you can still flash the unlocked firmware on AT&T note 8 after the Oreo update. Only the U1 unlocked firmware can be flashed and as long it's still on the same bootloader version. Also, you'll need a different version of Odin to flash for the Oreo update.
Use this version of Odin.
DOWNLOAD for ODIN:
ODIN v3.13.1
bboii86 said:
Yes, you can still flash the unlocked firmware on AT&T note 8 after the Oreo update. Only the U1 unlocked firmware can be flashed and as long it's still on the same bootloader version. Also, you'll need a different version of Odin to flash for the Oreo update.
Use this version of Odin.
DOWNLOAD for ODIN:
ODIN v3.13.1
Click to expand...
Click to collapse
I'm on at&t crk1. I need to flash unlocked. Can you please link me to the correct firmware?
10pmStalker said:
I'm on at&t crk1. I need to flash unlocked. Can you please link me to the correct firmware?
Click to expand...
Click to collapse
You can go HERE to get that information, Post #3
Which version can I download for SM-N950U which is from the United Arab Emirates
I just downloaded the files, I have no idea what I'm doing or how to open them and install them? Can anyone please help me? The Samsung files app says it cannot open the downloaded files And I'm not saying instructions anywhere