Italian Project Team GizROM presents Lineage OS Unofficial ROM for Nubia Z11.
#Version 1.1 Features
- based on the latest Lineage release [2017/02/18];
- official camera app by Nubia;
- official IR remote app by Nubia.
#Changelog 1.1
- bug fixing;
- general optimization;
- updated Lineage OS.
#Download
- http://forum.gizchina.it/index.php?/topic/667-nubia-z11-gizrom-lineage-os-edition-10/
#Instructions:
You must register on the forum to be able to download.
IMPORTANT: The procedure described in this guide requires executing complex operations which, if performed incorrectly, may harm your device. A good experience in modding is recommended before using the following guide. I and the Staff from GizChina.it will not to be held responsible for ANY damage to the device.
#Prerequisites
- Nubia Z11;
- Last Package Lineage 13 from GizROM team;
- Package Gapps (arm64, 6.0, nano);
- TWRP installed.
#Procedure
- copy Lineage OS GizROM and Gapps .zip files on the phone;
- enter the recovery (press simultaneously power and volume- button)
- clean the data partitions, cache and Dalvik cache;
- install ROM from TWRP;
- install Gapps;
- reboot the device;
- thank the team.
#Future Plans
- Updates every 2-4 weeks.
- OTA support.
#Notes
I have personally tested this ROM and currently running it daily. It works way better than the unofficial CM posted in xda last year and does not suffer from the wifi/data swapping problem. Given the recent problems on mokee and the losing SIM problems I strongly advice you to use this.
I will be updating this page when the new update comes out.
#Disclaimer
I do not own this ROM, all credits go to the GizROM team.
Contributors
GizROM Team, Francko76
ROM OS Version: 6.0.1 Marshmallow
Based On: Lineage OS
Version Information 1.1
Status: Beta
Created 2017-01-16
Last Updated 2017-02-17
hi bro, thank you for your colaboration, i have CM 13 installed, how i read, i have only wipe data partitions, cache and Dalvik cache, no wipe system is that right?
please confirm to me for put this rom to my z11.
thank you in advance
regards
I can confirm that switching from mokee or cm does not require system wipe. I didn't do it coming from mokee (18/11) update. I cannot tell from stock, but it would probably be better to system wipe as well in that case.
Very nice ROM, lot of features.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odesláno z mého NX531J pomocí Tapatalk
Runs very smooth and stable. Every other cm13 rom i had had issues with mobile data except this rom
1. Wifi is weak (hotspot strenght is horrible)
2. No OIS in video recording, 1080p60 fps not working. (I think, that international Nubia camera app will be better.)
3. battery life needs optimization (idle battery drain)
martas.vavra said:
1. Wifi is weak
2. No OIS in video recording, 1080p60 not working.
Click to expand...
Click to collapse
I will report the bugs to the team, thanks for the feedback.
Hi bro i put this rom today to my phone, it runs very good and is very fast, i like to know of the room is rooted or please tell me if i have to root and the way to root lineage os
Thank you in advance
uchiha_mau said:
Hi bro i put this rom today to my phone, it runs very good and is very fast, i like to know of the room is rooted or please tell me if i have to root and the way to root lineage os
Thank you in advance
Click to expand...
Click to collapse
Root is in developer options
Odesláno z mého NX531J pomocí Tapatalk
martas.vavra said:
Root is in developer options
Odesláno z mého NX531J pomocí Tapatalk
Click to expand...
Click to collapse
I found it, thank you bro is a good room, any news of updates?
It's written on the OP that updates are expected every 2 weeks.
Does ambient display work on nx531j at all? I installed couple modules on xposed or playstore and nothing worked..
janis_dschi said:
Does ambient display work on nx531j at all? I installed couple modules on xposed or playstore and nothing worked..
Click to expand...
Click to collapse
I have no idea, I reported the bug to the team. I never use it.
new version online
Normogrosso said:
new version online
Click to expand...
Click to collapse
Thank you for information, bro!
Some bugs / missing features :
- no NFC
- Bluetooh on / off toggle doesn't have persistent state, unlike previous version of CM. When u turn on Bluetooth, and then restart phone, it will go back to default off state again.
On another note, it would be more relevant if the devs start work on LineageOS 14.1 instead of continuing with 13.
Well, it looks like this thread is dead, so assuming no updates were being done on the ROM.
petrofsky77 said:
Well, it looks like this thread is dead, so assuming no updates were being done on the ROM.
Click to expand...
Click to collapse
i'm interested in a ROM which i can use root + decrypt my data, but it is always only one possible.
and of course not the problem of Giz'sROM... i think you know the issue
Aimphetamin said:
i'm interested in a ROM which i can use root + decrypt my data, but it is always only one possible.
and of course not the problem of Giz'sROM... i think you know the issue
Click to expand...
Click to collapse
Yes I know. GizROM is not at fault, they're just merely sharing the ROM, it's the community that is directly involved with the ROM seems to have abandoned ship for the Z11. Currently running on Mokee. It's by far the most stable AOSP ROM for this phone I have encountered. Too bad it is pre-rooted, so some of my banking apps cannot be used.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
[ROM][UNOFFICIAL][4.4.4][WEEKLIES] SlimKat [cancro], ROM for the Xiaomi Mi 3
Contributors
pandasa123
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2014-08-13
Last Updated 2014-08-13
Downloads
Remember, if you like my work, hit that thanks button and / or donate (if you're feeling extra happy)
ROM - Full ROMs every week
SlimGapps - Download Google App package and other addons. Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Slim 7.2
Start of project
For full list: Click here
Click to expand...
Click to collapse
List all Questions and Off-Topic discussions in Q/A Thread
Remember, flash at own will! Don't message me and threaten me with a lawsuit because I may or may not have broken your device!
Issues
Proximity Sensor
Auto Brightness
Most sensors lol
Thanks to:
SlimROMs for ROM
varun.chitre15 and qiwu for kernel
Click to expand...
Click to collapse
Installation Instructions
How to Enable Root
Downloading ... will give a try !
Boots !
Camera works !
FM works !
No random reboots !
All the icons are small ( maybe a slimkat feature dont know about this one)
Will need to test for else
TheDj408 said:
All the icons are small ( maybe a slimkat feature dont know about this one)
Click to expand...
Click to collapse
You might wanna increase DPI in that case.
TheDj408 said:
Downloading ... will give a try !
Boots !
Camera works !
FM works !
No random reboots !
All the icons are small ( maybe a slimkat feature dont know about this one)
Will need to test for else
Click to expand...
Click to collapse
Spectacular I'm glad a lot of the ROM works. As for icon size, Slimkat likes toning down the UI size for elegance. I've grown attached to it
DPI is at 370, which is exactly what it's at on the Nexus 5
thanks! downloading now, will test the room this evening.
Sent from my Mi3 via Tapatalk.
Great to see slimkat for Mi3.
What are the bugs? Sensors work?
harishl20 said:
Great to see slimkat for Mi3.
What are the bugs? Sensors work?
Click to expand...
Click to collapse
None yet, judging from user feedback, and no idea. I don't own the device, but decided to spend the last 2 nights (kept me awake for a bit) to build this
pandasa123 said:
Fully wipe your device from Recovery if you are not coming from SlimKat already.
Click to expand...
Click to collapse
I wiped everything but the SD card (to keep the installation file at least on the device), but I got bootloop after flashing the ROM and the according gapps package to both partitions. My previous ROM was a stable, 4.3 based official MIUI, and I have a CWM 6.0.4.8 by furiel.
Any idea how it went wrong? Do I also need to wipe the SD card?
s4tch said:
I wiped everything but the SD card (to keep the installation file at least on the device), but I got bootloop after flashing the ROM and the according gapps package to both partitions. My previous ROM was a stable, 4.3 based official MIUI, and I have a CWM 6.0.4.8 by furiel.
Any idea how it went wrong? Do I also need to wipe the SD card?
Click to expand...
Click to collapse
can you share a kmesg? I have a fair number of people saying theirs are fine, so i need to investigate any anomalies. just to make sure it's not the obvious candidate: is your device a cancro? try the cm in original android development just for sure, as it uses the same kernel.
Yes, it is a cancro, it is original, no doubt. I'll try to install an other CM-based ROM first, maybe I'll figure out something.
Do I need to wipe the SD card anyway?
s4tch said:
Yes, it is a cancro, it is original, no doubt. I'll try to install an other CM-based ROM first, maybe I'll figure out something.
Do I need to wipe the SD card anyway?
Click to expand...
Click to collapse
Usually not....strange...Did the other users wipe their sd cards?
OK, I got it working. I wrote this earlier: "My previous ROM was a stable, 4.3 based official MIUI" - that was the problem. I flashed the latest 4.8.8 developer ROM, than the SlimKat, and voilá, it's working. Camera works, UI is very fast, there's plenty of free RAM.
For those who have not used slim roms before, to enable root, follow this simple guide:
http://slimroms.net/index.php/faq/slimbean/441-how-do-i-enable-root
Thus ROM is for mi3w snapdragon version right??
Sent from my MI 3W
hrishikeshgramani said:
Thus ROM is for mi3w snapdragon version right??
Sent from my MI 3W
Click to expand...
Click to collapse
Yes
on a side note, can you guys use the Q/A Thread?
Wow I'm so happy this is so fast!! Currently I'm in a situation, I can't experiment with phone, but once I get out of it, I will be flashing Roms,
But I had no hope there will be a developer room! But I'm so really happy I couldn't help posting this, kudos to Op, you are simply awesome
So excited
Flashed the rom, using cwm with TDB enabled.
Flashing in system 2 doesn't work. Had to flash in system 1.
Wifi stuck at "Obtaining IP Address" - Anyone else? Any workaround?
**Changing the contents of /system/etc/wifi/ with the one in attached file fix my wifi**
Camera is working both still pics and video. Though video is by default set to 4k, had to change it before start recording.
Thanks for the awesome work. :good:
So guys there is not issue with sensors?? as in CM and Mokee rom?
camera and gps work, proximity sensor, auto brightness don't.
Sent from my Mi3 via Tapatalk.
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your ENTER-PHONE-NAME, or coming from another ROM: <--THESE MAY NEED UPDATING FOR YOUR PARTICULAR DEVICE; BE THOROUGH IN INSTRUCTIONS-->
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip <--& vendor img, if applicable--> to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
LIST-KNOWN-ISSUES-ON-YOUR-DEVICE-HERE
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- ENTER-SPECIFIC-THANKS-HERE-IF-YOU-HAVE-THEM
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
Hit Thanks :good: if you liked it!
crDroid G+ community
XDA:DevDB Information
crdroid, ROM for the Lenovo P2
Contributors
ruturajjena, Subham, arghyac35, Priyesh, Firelord
Source Code: https://github.com/crdroidandroid
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: unlocked bootloader, TWRP
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: 4.6
Created 2018-05-13
Last Updated 2018-08-27
Thank you very much dev!!!
Omg, quotes full op to say thx, dont do that!
There is a dedicated button just for this purpose.
Regarding the rom - i took a quick look at it, but iam missing blurr effect if u pull down notifications, which i fell in love with. But its good to see, that there r more and more los-based oreo roms with fp-gestures working.
Imo, best customizations, including the mentioned blurr effect, and fp-gestures comes with RR.
Screenshot please?
For some reason this failed to recognize my jio India sim. Signal strength is very week with airtel as well. Anyone else.? Going back to Los 15.1
What's the difference between this ROM and the one by gamefreaksuraj?
IshtaNoob said:
What's the difference between this ROM and the one by gamefreaksuraj?
Click to expand...
Click to collapse
This is made from the new sources of subham and firelord, probably less bugs.
potatoman4321 said:
This is made from the new sources of subham and firelord, probably less bugs.
Click to expand...
Click to collapse
Would it be acceptable to dirty flash this over the other crdroid...? It'll be a hassle to install everything all over... Plus, the other one has FP gestures.
IshtaNoob said:
Would it be acceptable to dirty flash this over the other crdroid...? It'll be a hassle to install everything all over... Plus, the other one has FP gestures.
Click to expand...
Click to collapse
You can try it, but i think you will get issues, because it's from other sources. This rom has fp gestures to.
Forced closed of startup wizard, cant continue set up
Truzzman2 said:
Forced closed of startup wizard, cant continue set up
Click to expand...
Click to collapse
restart system...
or,
reboot in recovery, clean dalvik/art/cache
for me, evrythink is ok!
used this rom for one day, then I restarted the phone, but phone keeps hanging on bootanimation screen
potatoman4321 said:
used this rom for one day, then I restarted the phone, but phone keeps hanging on bootanimation screen
Click to expand...
Click to collapse
with me too! I'm going back to the great bootleggers rom!
wlan1 said:
restart system...
or,
reboot in recovery, clean dalvik/art/cache
for me, evrythink is ok!
Click to expand...
Click to collapse
Thanks, setup ok
---------- Post added at 12:42 PM ---------- Previous post was at 12:41 PM ----------
WPS doesn't works, tested whit two different router
potatoman4321 said:
used this rom for one day, then I restarted the phone, but phone keeps hanging on bootanimation screen
Click to expand...
Click to collapse
U have to press home button for home screen to appear
Sohit5s said:
U have to press home button for home screen to appear
Click to expand...
Click to collapse
Tried that but didn't work
Well, unlike previous posters, I've had no issue so far. Clean flashed, flashed pico gapps and magisk, and everything went fine. No problems rebooting, no need to press anything.
Just flashed Subham's kernel, and it's still working fine
Bluetooth is always on. Paired only with xiaomi mi band 2. Huge battery drain!!!
Sent from my Lenovo P2 using Tapatalk
abderazakallouch said:
Bluetooth is always on. Paired only with xiaomi mi band 2. Huge battery drain!!!View attachment 4502363
Sent from my Lenovo P2 using Tapatalk
Click to expand...
Click to collapse
I tried leaving bluetooth on for a few hours, and got 63% battery usage from it, with nothing paired.
Still about 7h SoT, which is usual for me, so I'm guessing it's a misread, and not an actual drain. Will try a full charge with BT on and see the resulting SoT.
I cannot find fingerprint anywhere, phone is encrypted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
Kernel source
Device tree source
MAJOR BUGS:
you tell me
other bugs:
Full mods support is not confirmed,
flash on your own risk.
So far tested projector, JBL, battery and gamepad mods.
FLASHING
Wipe data/system/cache
Flash rom zip
[optional]Flash open gapps nano
Reboot
XDA:DevDB Information
OmniROM, ROM for the Moto Z
Contributors
vache, erfanoabdi
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked bootloader, TWRP
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2018-12-21
Created 2018-12-21
Last Updated 2019-05-26
Am I reading this right? Partial moto mods support? Does efficiency mode on the battery work? This is huge!
Moto power pack works fine so I prefer this ROM to LOS 16. But I can't find App Ops or similar in this ROM. What program could you recommend to use like App Ops or Privacy Guard?
Noticed an issue with mod detection and audio mod, flash this boot to fix it : https://drive.google.com/file/d/1dtOo2IpbIusCao-BppqD1igX1oBYZv1Q/view?usp=sharing
Just installed this rom. So far so good, Incipio battery mod working as it should. I'll add any bugs I notice to this post later. Another thing I'll add, it feels smoother than LOS 16.
Edit 1: So if I try to add a new google account, I get a black screen, anyone else with the issue?
Does the original Jbl mod have volume control, besides mute and full blast? Maybe someone who already has flashed the rom can give it a shot!? It would be highly appreciated! ?
vache said:
Download
Kernel source
Device tree source
MAJOR BUGS:
you tell me
other bugs:
Full mods support is not confirmed,
flash on your own risk.
So far tested projector, JBL, battery and gamepad mods.
FLASHING
Wipe data/system/cache
Flash rom zip
[optional]Flash open gapps nano
Reboot
XDA:DevDB Information
OmniROM, ROM for the Moto Z
Contributors
vache, erfanoabdi
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked bootloader, TWRP
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2018-12-21
Created 2018-12-21
Last Updated 2018-12-21
Click to expand...
Click to collapse
Installed and stuck on boot animation, remove indigo battery pack, boot normally, install boot.img patch and all wokrs.
Testing now, root is not working
O l l i X said:
Does the original Jbl mod have volume control, besides mute and full blast? Maybe someone who already has flashed the rom can give it a shot!? It would be highly appreciated! ?
Click to expand...
Click to collapse
This omnirom definitely has volume control for JBL mod :good:
this rom supports VoLTE and VoWIFI?
thanks in advance
YamazakiRobert said:
this rom supports VoLTE and VoWIFI?
thanks in advance
Click to expand...
Click to collapse
Yes it supports both, not tested tho.
need"fastboot -w"!
I don't have a computer,how to install this rom?
flysg said:
need"fastboot -w"!
I don't have a computer,how to install this rom?
Click to expand...
Click to collapse
Just use TWRP to format the needed partitions.
Benni:) said:
Just use TWRP to format the needed partitions.
Click to expand...
Click to collapse
tks,Installed.
maybe outlook fc..
Zzoro said:
Moto power pack works fine so I prefer this ROM to LOS 16. But I can't find App Ops or similar in this ROM. What program could you recommend to use like App Ops or Privacy Guard?
Click to expand...
Click to collapse
Can you stop moto power pack charging your phone like stock rom? If yes i'll be downloading soon!
Outlook apk fc,camera and volte is OK.
---------- Post added at 07:50 AM ---------- Previous post was at 07:44 AM ----------
After the factory reset, the account problem is no problem.
this app is not working,if Disable Chromium
MicroG Vanced (New)
Version:
0.2.4-105
Published:
01/01/1900
heithered said:
Can you stop moto power pack charging your phone like stock rom? If yes i'll be downloading soon!
Click to expand...
Click to collapse
Yes, the efficiency mode work pretty well
Disable Chromium, webview will be a problem.
Confirming about chrominiun. If you disable it, some apps crash (like Tumblr) and you cant add google accounts (black screen). If its enabled, everything is a-okey! ?
You can still install another webview if you disable chromium.
SlashSpeed said:
Confirming about chrominiun. If you disable it, some apps crash (like Tumblr) and you cant add google accounts (black screen). If its enabled, everything is a-okey!
Click to expand...
Click to collapse
Ohh thanks for this! That explains why I couldn't get Waze to work and why I couldn't remove my google account from the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Redmi 4X [santoni]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation).
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device.
Based on Android 10
What's working?
WiFi
RIL
Mobile Data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint Reader
Face Unlock
NFC
Lights
Sound/Vibration
Known issues
Nothing...
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Pixel Experience website
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r33
Security patch level: April 2020
Build author/Device maintainer: pranaya2005
Device source code: https://github.com/PixelExperience-Devices
Source code: https://github.com/PixelExperience
ROM developer: jhenrique09
XDA:DevDB Information
PixelExperience 10, ROM for the Xiaomi Redmi 4X
Contributors
deomani007, Stargazer19, Harukey
Source Code: https://github.com/PixelExperience
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP, Unlocked Bootloader
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2020-04-19
Created 2020-04-21
Last Updated 2020-04-21
Reserved
nice rom... do we need to do clean flash everytime ? even from updating builds from the same ROM ?
nilesh401 said:
nice rom... do we need to do clean flash everytime ? even from updating builds from the same ROM ?
Click to expand...
Click to collapse
Try dirty flash only if u want, if no FCs or issues in a dirty flashed ROM, then enjoy ur life
deomani007 said:
Try dirty flash only if u want, if no FCs or issues in a dirty flashed ROM, then enjoy ur life
Click to expand...
Click to collapse
Thanks bro for responding..
Still kernel version 3.xx?
---------- Post added at 02:59 PM ---------- Previous post was at 02:59 PM ----------
Thank you dude
Ahmad5544 said:
Still kernel version 3.xx?
Click to expand...
Click to collapse
So what do you expect from a 3-year old device bro??
Maybe if nichcream sir releases his sources then we can think about 4.9 kernels
Ahmad5544 said:
Thank you dude
Click to expand...
Click to collapse
Welcome
Latest gcam will work?
Official or unofficial
I installed this last night, did a full wipe, then installed this and the first time when flashing Magisk after it got stuck bootlooping the G logo. I wiped Davik and installed again and magisk went on fine this time. I only just noticed today that my microphone isn't working in videos and apps. The permissions are allowed in the settings, is this something anybody else experienced? Any Ideas? It definitely works as I phoned a friend and I use the 'okay google' thing
Fingerprint scanner (Goodix)
Thanks a lot for this ROM. This is my first time flashing a custom ROM on an Android. I did get stuck after installing, when it didn't wanna let me into the system after boot, because there was encryption enabled, and I didn't have the password, so I thought I bricked it . But after completely wiping with TWRP it was fine.
Btw. I know it's one of the known issues but, is there a plan to make the Goodix scanner work? Mine doesn't work, so I'm guessing I have Goodix. Thanks a lot.
McguyverZero said:
I installed this last night, did a full wipe, then installed this and the first time when flashing Magisk after it got stuck bootlooping the G logo. I wiped Davik and installed again and magisk went on fine this time. I only just noticed today that my microphone isn't working in videos and apps. The permissions are allowed in the settings, is this something anybody else experienced? Any Ideas? It definitely works as I phoned a friend and I use the 'okay google' thing
Click to expand...
Click to collapse
Disable OK Google
deomani007 said:
Disable OK Google
Click to expand...
Click to collapse
Awesome that worked thanks, I guess with this theres no way to have both normal app mic usage and the Google assistant on? I'm not too bothered about the google assistant in the long run but woulda been nice
Can I flash it from miui 11 ?
It's working great here. Thx!
Two questions. 1. There is a way to use the fingertip reader to unlock the phone? 2. For some reason i lost my root after installing the rom and wasn't able to root back (bootloader still unlocked). Any tips? Thx.
H_A_M_A_D_a said:
Can I flash it from miui 11 ?
Click to expand...
Click to collapse
Ofcourse you can, but do a clean flash
KamatsuKyoto said:
It's working great here. Thx!
Two questions. 1. There is a way to use the fingertip reader to unlock the phone? 2. For some reason i lost my root after installing the rom and wasn't able to root back (bootloader still unlocked). Any tips? Thx.
Click to expand...
Click to collapse
1. If you have Goodix Fingerprint Scanner then it'll obviously won't work, if you have FPC, then it should work fine.
2. Did you try flashing Magisk installer zip?
one request to the developer, can the network speed indicator be added to the status bar.. ?
Some bug
Fingerprint doesn't work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 6.5 for the Xiaomi Mi Note 10 Lite [toco]
Keep Evolving
Pixel UI, customization, and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM
Just flash and check "The Evolver". We have tons of features combined together from different ROMs.
You tell me
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
NB: Use sideload method if you have encrypted data
- Have the latest Global stable MIUI v13.0.1.0 installed
- Make sure you're running OrangeFox
- Boot into recovery
- Copy Rom
- Flash Rom
- Format data
- Reboot to system & #KeepEvolving
Update / Dirty Flash
- Boot into recovery
- Flash Rom
- Wipe Dalvik Cache & Cache
- Reboot to system & #KeepEvolving
Download
Donate me! / Official Chat / Device Support
Android version: 12.1.0_r8
Evolution version: 6.5
Security patch level: June 2022
Build Author: AndroidHQ254
ROM Source: [URL]https://github.com/Evolution-X[/URL]
Kernel Source:: VantomKernel
ROM Developer: Joeyhuab
XDA:DevDB Information
Evolution X, ROM for the Xiaomi Mi Note 10 Lite
Contributors
AndroidHQ254, @NeoArian
Source Code: https://github.com/Evolution-X
ROM OS Version: Android 12L
ROM Kernel: Linux 4.14.282
ROM Firmware Required: Latest Stable MiUI v13.0.1.0 (Android 12)
Based On: AOSP
Version Information
Status: Stable
Created 2020-11-24
Last Updated 2022-06-13
Reserved
I'll go try this one boss. Thanks.
After flashing rom i didnt boot up. It takes me bk to the recovery every time
kei111 said:
I'll go try this one boss. Thanks.
Click to expand...
Click to collapse
How is it going?
Aryfour said:
After flashing rom i didnt boot up. It takes me bk to the recovery every time
Click to expand...
Click to collapse
Ensure you format data. Follow instructions
AndroidHQ254 said:
Ensure you format data. Follow instructions
Click to expand...
Click to collapse
Nw i flashed it successfully bt the problem is on recovery...in files everything is changed in file name..i cant recognize any single file..what can i do?
AndroidHQ254 said:
How is it going?
Click to expand...
Click to collapse
AndroidHQ254 said:
How is it going?
Click to expand...
Click to collapse
Everything is going better. I think I would love this version 6.0 than the 5.9.
The fingerprint is a lot faster and so far I didn't experienced any bugs just yet. All's seems to be working. The UI is also amazing.
I've noticed the customizations are lesser than the version 5.9 but it's still looking good.
I've also rooted my device with magisk and it's completely working.
Overall, the ROM is perfectly working and reliable.
Thanks boss.
kei111 said:
Everything is going better. I think I would love this version 6.0 than the 5.9.
The fingerprint is a lot faster and so far I didn't experienced any bugs just yet. All's seems to be working. The UI is also amazing.
I've noticed the customizations are lesser than the version 5.9 but it's still looking good.
I've also rooted my device with magisk and it's completely working.
Overall, the ROM is perfectly working and reliable.
Thanks boss.
Click to expand...
Click to collapse
Am glad all is working well. Features are being added gradually
Aryfour said:
Nw i flashed it successfully bt the problem is on recovery...in files everything is changed in file name..i cant recognize any single file..what can i do?
Click to expand...
Click to collapse
Data decryption on A12 is not supported yet
Want to flash this rom but I can not go to recovery Im using KangOS right now. What can I do?
GericLois said:
Want to flash this rom but I can not go to recovery Im using KangOS right now. What can I do?
Click to expand...
Click to collapse
I would suggest flash and boot orangefox recovery through fastboot, from there you can flash your ROM.
İ an wating bootloader unlock time. İ will try thanks
Even though i was waiting for december release, i jumped ship to this rom form crdroid i had temporarely used.
So far so good and everything is smooth. Battery life is solid, 10-12 hours sot prolly depending on use, maybe even more than 12 if not gaming and using wifi only.
The one thing i do miss is the face unlock, but i know the 12 does not have one at all so i hope that devs will be able to add it evetnually.
Ok so i need some guidance here. Some time ago i installed the 12 when this evox was posted first time, on the app. I didint like it at first so i was able to restore crdroid form the same orangefox recovery. I still have that recovery but notice that the rom is encrypted, and that when is next update time i cant dirty flash since i have no access to files. Is there a way to sideload the next update? Any recovery that i can sideload it with?
OrangeFox recovery shows all files with garbage random names, how do i fix it?
Update: it was encrypted had to clear data
same here, how did it exactly? (wipe data?)
brepeti said:
same here, how did it exactly? (wipe data?)
Click to expand...
Click to collapse
In TWRP Wipe > Advanced Wipe > Change or Repair File System > Change File System
Change them to ext2 first, then go back to ext4. I had the same problem a week ago and doing this solved it for me.
Too much frame drop in pubg mobile on this rom..its likely unplayable. Is there any fix for this?
But which twrp are you using @bilge_kagan ?
Above req ask for orangefox, so to stay on orangefox or to move to that twrp?
Never mind, I was messing with that on orangefox and i just ended up deleting everything lol...Luckily i had one twrp file that i was able to use, because i was not able to install latest orangefox, it would not boot to it from fastboot. Anyways i got everything sorted, installed latest firmware, orangefox and installing the latest evox.