Related
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Try install Kies and try again...
/CK
tried with old kies and kies 3 as well.Also tried older drivers.
Do i have a locked BootLoader?This shouldnt be the case as it is an n9005.
Any way to check if bootloader is locked and if so any way to unlock it for the international version?
Thanks!
No one?
Doesn't any one know how to help?Don't know where else to ask.
NavDragan said:
Doesn't any one know how to help?Don't know where else to ask.
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
NavDragan said:
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Click to expand...
Click to collapse
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
I deactivated the reactivation lock but still the same problem.I have Downloaded the CF-Auto-Root-hlte-hltexx-smn9005.tar file several times same thing every time.My last chance is doing a full wipe of the system and then trying again.I hope orange Romania CSC does't have some sort of security block.
Frustrating thing is the phone is fully functional so i cannot ask for a replacement.And even after the dozens of failed flash attempts it still reads 0x0.
YES!!!Finally.A full wipe did it.!Thank you for your interest in helping me.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks that helped! Unlike the OP didnt have to wipe phone.
Thank youu
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
thanks for bringing this up.
so where do you get the proper file?
i have the same problem, and a full wi[e has not helped here..
kindly give the correct link.
thanks once again
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Cruel B said:
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
---------- Post added at 03:22 PM ---------- Previous post was at 02:51 PM ----------
aidelnma said:
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
THANK YOU!
Yes, the reactivation lock did it for me too. I was stuck at exactly the same point and couldn't think of why, and this didn't even come to mind. In fact, I forgot that I even did that, but it worked. !!!
nsnarayan10 said:
I will help you,dont worry!
Click to expand...
Click to collapse
Help please, I have a (Note 3) SM-N900V on JSS15J.N900VVRUBMJE.
I bought it on Jan 12th ish, and took the firmware update as soon as I saw it because of some reading I had done.... shouldn't have done that I guess.
I am still totally unable to root this thing, Kingo, Odin v3.0.9. I am willing to do w/e (go back to older firmware even if possible)
I know there are no guarantees in this attempt, and would not hold you to anything, I have rooted every other android I have had and am very familiar with the process, any help you can offer would be greatly appreciated
https://plus.google.com/u/0/+JoelJrMcCracken/
This has helped. Thanks a lot.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
This helped a lot. Problem fixed.
regards
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks. 1.5 years later and this helped me too!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
U sir are a life saver!
Thanks!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thank you, you saved me from pulling my hair out :highfive:
Hello to all.
I have a Tab 3 (that was given to me)on Software version T217SVPUBOH1
Hardware Version T217S.04
Model Number SM-TS17S
Android Ver: 4.4.2
Baseband T217SVPUBOH1
I guess Stock Kernel 3.4.0-1715729
Build Number KOT49H.T217SVOUBOH1
Could Someone direct me to the PROPER CF Auto Root and Odin? I am not planning on changing the ROM, I just want to Add Viper to increase the Audio Volume and maybe some other root controls.
Any and All Help Is Appreciated
Thank you in Advance
Blessings
Thank a lott!!!already rooted!!!!
Bricked my phone while uninstalling APKs. Was using version 4.3. Unsure of baseband version. After which I tried to turn on my phone and all I could see was the samsung logo and it got stuck there.
Tried to reflash my phone with version 4.3 kernels and ROMs to no avail.
Unable to get past Starting apps. Sometimes flashing just gives me a black screen.
Any help would be good. Much thanks.
Thelol123 said:
Bricked my phone while uninstalling APKs. Was using version 4.3. Unsure of baseband version. After which I tried to turn on my phone and all I could see was the samsung logo and it got stuck there.
Tried to reflash my phone with version 4.3 kernels and ROMs to no avail.
Unable to get past Starting apps. Sometimes flashing just gives me a black screen.
Any help would be good. Much thanks.
Click to expand...
Click to collapse
Where are u from? Ur phone is branded or no? If is branded: tell me brand pls
Joku1981 said:
Where are u from? Ur phone is branded or no? If is branded: tell me brand pls
Click to expand...
Click to collapse
Singapore. Brand as in? My provider is M1
Thelol123 said:
Singapore. Brand as in? My provider is M1
Click to expand...
Click to collapse
Go to Apps - Settings - More - About device and make us a beaty screenshot pls
Joku1981 said:
Go to Apps - Settings - More - About device and make us a beaty screenshot pls
Click to expand...
Click to collapse
Cant boot. Would love to get to the settings screen. Trying to boot the phone now. Might have uninstalled the wrong APK. how to fix this?
Thelol123 said:
Cant boot. Would love to get to the settings screen. Trying to boot the phone now. Might have uninstalled the wrong APK. how to fix this?
Click to expand...
Click to collapse
what model of phone (i9500, i9505, etc) sir? Touch Wiz or Google AOSP?
Joku1981 said:
what model of phone (i9500, i9505, etc) sir?
Click to expand...
Click to collapse
Ah sorry, Forgot to include that in the original post. Its a i9505. Thanks!
Thelol123 said:
Ah sorry, Forgot to include that in the original post. Its a i9505. Thanks!
Click to expand...
Click to collapse
Ok, u are lucky. I have the latest firmware for Malaysia Android 4.3. Only download it and flash it: - DOWNLOAD HERE -
EDIT: Dont flash nothing more (kernels or nothing). If u are unsure how flash ROMs, pls ask before
I tried flashing with Odin and got this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Stock_Rooted_Odexed_MF9_Rom.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NON-HLOS.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I think if u could boot into recovery(power+volumeup+home button once only then keep pressing volume up button).If u r able to boot into recovery wipe data factory reset.Flash firmware with odin
Sent from my GT-I9500 using XDA Premium 4 mobile app
RISHI RAJ said:
I think if u could boot into recovery(power+volumeup+home button once only then keep pressing volume up button).If u r able to boot into recovery wipe data factory reset.Flash firmware with odin
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I still get the same error?
have u wiped data
Sent from my GT-I9500 using XDA Premium 4 mobile app
Thelol123 said:
I still get the same error?
Click to expand...
Click to collapse
<OSM> Stock_Rooted_Odexed_MF9_Rom.tar.md5 is valid -> This isnt the file I uploaded for you in the post #8 (My firmware is MK9).
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse
Good one bud.... I can't get it last night but I'm glad u did[emoji106]
TwisT3DroiD_N920T
Threads of this nature do not belong in the development section. Please read the sticky titled "Rules for Posting in Development" before posting in there again.
THREAD MOVED
galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse
Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app
PhilPan said:
Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app
Click to expand...
Click to collapse
yes, as odin wipes your internal card and firmware..
PhilPan said:
Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app
Click to expand...
Click to collapse
just factory reset.....poof root gone!
galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
ted77usa said:
Good one bud.... I can't get it last night but I'm glad u did[emoji106]
TwisT3DroiD_N920T
Click to expand...
Click to collapse
Throwing you in the mix as well. Please see my post above.
-BoneZ- said:
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
Throwing you in the mix as well. Please see my post above.
Click to expand...
Click to collapse
@-BoneZ-
U said that u tried to go back to stock from root? Meaning u have pgc firmware and u CAN'T use this PI4 firmware to go back to stock..... when u do that u stuck with newer Bootloader and u not able to root again.... if u need to go back then flash PGC original firmware.
EDIT:
If u already on PI4 then flash all at once.... BL AP CP CSC....
TwisT3DroiD_N920T
-BoneZ- said:
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
Throwing you in the mix as well. Please see my post above.
Click to expand...
Click to collapse
Yes you must flash all parts of this to be on stock PI4 ROM. But remember that you will lose root and not get it back.
You sir are a life saver thank you so much i was stupid didnt read thru forums and tried to root on the latest update...this flashed via odin brought my phone back to life
ted77usa said:
@-BoneZ-
U said that u tried to go back to stock from root? Meaning u have pgc firmware and u CAN'T use this PI4 firmware to go back to stock..... when u do that u stuck with newer Bootloader and u not able to root again.... if u need to go back then flash PGC original firmware.
EDIT:
If u already on PI4 then flash all at once.... BL AP CP CSC....
TwisT3DroiD_N920T
Click to expand...
Click to collapse
galaxyuser88 said:
Yes you must flash all parts of this to be on stock PI4 ROM. But remember that you will lose root and not get it back.
Click to expand...
Click to collapse
Thanks, guys. Those were the answers I was looking for.
Hello I want to say thank you for providing the T-Mobile Firmware Package for restoring the Note 7 to its original state after a Rooting atampt botched up. I also had this problem but now restored the phone with the supplied firmware. Thank you.
I do have one problem though. The firmware supplied has the first update with the annoying Safety Recall statement in that hugh box while plug is inserted, pulled out and turned on. I like to know if you can supply the original firmware that the phone came boxed with or if you have some kind of way of getting rid of that stupid annoying big box message that pops up all the time.
And again thank you so much.
Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...
mikesx4911 said:
Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...
Click to expand...
Click to collapse
Have you tried this yet?
★[ROM] [STOCK] N930TUVU1APGC | 6.0.1 |… | T-Mobile Samsung Galaxy Note 7
http://forum.xda-developers.com/tmo...om-n930tuvu1apgc-6-0-1-deodexed-knox-t3461513
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
mikesx4911 said:
Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...
Click to expand...
Click to collapse
If you can restore it back to stock. This thread may help. It's helping me.
Need help with Package Disabler 6.3 | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/help-package-disabler-6-3-t3494052
So I just tried to do the instructions from the ROM STOCK below however I get stuck on step 5 when I try to flash the "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRM WARE.tar.md5" it FAILS at
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> adspso.bin
<ID:0/003> apdp.mbn
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth) <------------------------
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I than did a quick search had someone suggest checking "re-partition" that also failed with the same error. After rebooting the phone it wouldn't boot anymore and was stuck at "an error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software"
So I gave that a go and it tells me that the device is not supported after doing the model and serial number lol.
ConcernedCustomer said:
Have you tried this yet?
★[ROM] [STOCK] N930TUVU1APGC | 6.0.1 |… | T-Mobile Samsung Galaxy Note 7
http://forum.xda-developers.com/tmo...om-n930tuvu1apgc-6-0-1-deodexed-knox-t3461513
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
If you can restore it back to stock. This thread may help. It's helping me.
Need help with Package Disabler 6.3 | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/help-package-disabler-6-3-t3494052
Click to expand...
Click to collapse
mikesx4911 said:
So I just tried to do the instructions from the ROM STOCK below however I get stuck on step 5 when I try to flash the "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRM WARE.tar.md5" it FAILS at
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> adspso.bin
<ID:0/003> apdp.mbn
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth) <------------------------
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I than did a quick search had someone suggest checking "re-partition" that also failed with the same error. After rebooting the phone it wouldn't boot anymore and was stuck at "an error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software"
So I gave that a go and it tells me that the device is not supported after doing the model and serial number lol.
Click to expand...
Click to collapse
I was able to stop the 60% update with package disabler, but was also trying to go back to pgc update...getting the same fails as you. 3 Button into recovery and wipe everything then reboot. Should start you fresh to use the phone
Sent from my SM-G935T using XDA-Developers mobile app
ArmyofTracy said:
I was able to stop the 60% update with package disabler, but was also trying to go back to pgc update...getting the same fails as you. 3 Button into recovery and wipe everything then reboot. Should start you fresh to use the phone
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
If only it was that easy. As of now I can't even get into android it fails to boot. I cleared cache and factory reset and still won't boot. I'm sure I will have to flash now for sure from recovery or download mode. I think Samsung is ****n with us somehow to not let us flash.
mikesx4911 said:
If only it was that easy. As of now I can't even get into android it fails to boot. I cleared cache and factory reset and still won't boot. I'm sure I will have to flash now for sure from recovery or download mode. I think Samsung is ****n with us somehow to not let us flash.
Click to expand...
Click to collapse
The same thing happened to me. I re-flashed to the recent firmware I had installed originally (the one with the big ugly safety recall message from September). I flashed everything at once BL, AP, CP and CSC(I used the HOME_CSC_*.tar.md5 named file because I was returning to stock)
This site appears to be an archive for all Android devices. You can find the firmware of your phone using the model going back to launch date.
Download Firmware – Samsung Update
http://updato.com/firmware-archive-select-model
I think you will find this thread useful as well. It contains definitions and explanations on flashing and working with Odin. I just wish there was more information.
Good luck
Galaxy Note 7 All-In-One Information & A… | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/galaxy-note-7-one-information-answers-t3448689
Is there a way too get back to PGC? That was the one before the recall? I've tried flashing it and it fails
Sent from my SM-G935T using XDA-Developers mobile app
ConcernedCustomer said:
The same thing happened to me. I re-flashed to the recent firmware I had installed originally (the one with the big ugly safety recall message from September). I flashed everything at once BL, AP, CP and CSC(I used the HOME_CSC_*.tar.md5 named file because I was returning to stock)
This site appears to be an archive for all Android devices. You can find the firmware of your phone using the model going back to launch date.
Download Firmware – Samsung Update
http://updato.com/firmware-archive-select-model
I think you will find this thread useful as well. It contains definitions and explanations on flashing and working with Odin. I just wish there was more information.
Good luck
Galaxy Note 7 All-In-One Information & A… | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/galaxy-note-7-one-information-answers-t3448689
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Failed again... Tried both CSC files
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
jelmerpeligrino said:
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
Click to expand...
Click to collapse
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Has.007 said:
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Click to expand...
Click to collapse
Here bro.
morgannoobman said:
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
Click to expand...
Click to collapse
How did you do it?
jelmerpeligrino said:
Here bro.
Click to expand...
Click to collapse
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Has.007 said:
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Click to expand...
Click to collapse
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
No
jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
jelmerpeligrino said:
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
Click to expand...
Click to collapse
Make sure you've a good backup. Nd also you've Samsung USB drivers already installed in your PC.
Power off your device nd boot in download mode by pressing Volume Down + Home + Power Buttons together.
Then open Odin nd connect your phone to PC via data cable nd press volume Up key on phone, then if it shows you "Added" in Odin you're good to go.
Select the AP option nd select the firmware which you've downloaded. Now it'll take some time to verify the md5 as depending upon the speed of your PC. Once it has verified you'll be able to click on other options. So now you've to click on Start nd make sure you don't move your device or the connection doesn't cut off or your device might get hard bricked.
That's it, the flashing time would be about 4-5 minutes. After it is flashed the phone will reboot nd now you can factory reset the device properly for a clean new device.
I've told everything you needed to know.
Enjoy!
Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
waleeds1 said:
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
Click to expand...
Click to collapse
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problem as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
I didnt read that part. U got a point there mate.
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
woris said:
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
Click to expand...
Click to collapse
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
Is this normal bro? I flashed it already.
waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
woris said:
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Click to expand...
Click to collapse
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
jelmerpeligrino said:
Is this normal bro? I flashed it already.
Click to expand...
Click to collapse
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Has.007 said:
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Click to expand...
Click to collapse
So far, it was good. The performance is better now compared to Kitkat and and the sluggishness was gone. Thanks bro!
Btw, do you have any Marshmallow ROM for this device?
I think I need some help from someone. I have a Galaxy S7 Edge (tmo) with the rom of a G935U from last year i believe It was originally a G935T from the store. I flashed a G935U Rom and it was all fine and dandy. Now, I want to go back to stock, so i downloaded TMB_G935TUVU3APG1 firmware and used Odin 3.12 Prince Comsy version and loaded up the AP, BL, CSC, CP. (I have the Samsung USB Drivers installed)
I then clicked on "start" and then got this error: constantly bootloop the "recovery booting"
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to use a different firmware version and now my phone says "An error has occured while updating device software. Use the emergency recovery function in Smart Switch PC Software"
I installed Smart Switch, loaded it up, plugged in my phone, and Its saying "Unsupported Device"
I tried going into Emergency Software Recovery but I don't think it works (or im not doing it right). I click on "device initialization" tab and enter my phone model "SM-G935T" without quotes and it keeps telling me "please check the model name and enter it"
I am so stuck. I really hope someone can help me out. I have never had any issues before this.
EDIT: Still stuck, but got into Smart Switch and it was able to download a new rom, but when it tried to apply the rom to my phone, it came back with an error " Failed to update software due to an error. Do you want to run emergency Software Recovery?" and when i click "Emergency Recovery" nothing happens.
EDIT 2 : Retried with latest firmware. Error details below.
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well, first off you're flashing old firmware. Download the latest firmware (Which for the 935U is QD2: https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935U/), not just any random firmware you find.
Get back into DL mode and flash again using the modded Odin. Hold power, home and volume down. Eventually it'll restart in Download mode.
For best reults, Flash the QD2 files in Odin but for CP use the QE1 modem. (I made a thread with a link to DL from my Google Drive. Yes, you'll need to DL 2 firmwares. One U and One T firmware but all you want is the CP file from the QE1. Yes, it'll flash fine and it will give you much better signal. Latest U firmwares have had **** signal.)
joe3681 said:
Well, first off you're flashing old firmware. Download the latest firmware (Which for the 935U is QD2: https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935U/), not just any random firmware you find.
Get back into DL mode and flash again using the modded Odin. Hold power, home and volume down. Eventually it'll restart in Download mode.
For best reults, Flash the QD2 files in Odin but for CP use the QE1 modem. (I made a thread with a link to DL from my Google Drive. Yes, you'll need to DL 2 firmwares. One U and One T firmware but all you want is the CP file from the QE1. Yes, it'll flash fine and it will give you much better signal. Latest U firmwares have had **** signal.)
Click to expand...
Click to collapse
So what is the newest firmware for the 935T? Because after using Smart Switch and having it attempt to fix my phone, it now reads as a 935T in Download mode. Do i still want both firmwares if I am going back to stock?
EDIT: After doing some quick searching, 930TUVS4BQC1 looks like the latest 935T firmware. So I would flash all but the CP from the 930TUVS4BQC1 and then flash the CP from the QE1 firmware? Not sure if it makes a difference, but I was NOT on Nougat when this issue occured.
Forkinator said:
So what is the newest firmware for the 935T? Because after using Smart Switch and having it attempt to fix my phone, it now reads as a 935T in Download mode. Do i still want both firmwares if I am going back to stock?
Click to expand...
Click to collapse
Doesn't matter, you can still flash U fw. If you want completely stock TMobile, find my thread of QE1. It's the latest, bone stock TMobile firmware.
joe3681 said:
Doesn't matter, you can still flash U fw. If you want completely stock TMobile, find my thread of QE1. It's the latest, bone stock TMobile firmware.
Click to expand...
Click to collapse
Alright I have a decent internet connection so i did as you said, Used the modem (CP) from QE1 and the BD, CSC, AP from QD2. At least this error was different. I don't normally have these issues so I am so lost and worried right now.
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
1. Try a better/different cable or port
2. Remove the .md5 off the end of each file name and try again
joe3681 said:
1. Try a better/different cable or port
2. Remove the .md5 off the end of each file name and try again
Click to expand...
Click to collapse
WTF!
Dude seriously wtf. It worked! I changed ports, and used a different cable.
I am in awe right now. I don't know what to say besides THANK YOU, YOU GLORIOUS BASTARD!
On a serious note, I don't know why that would have worked. I have always used the port/cable to flash roms. Thanks man, I went to T-mobile earlier and they said i would have to wait till tuesday for a new phone. Going to call them and tell them my phone fixed itself
You really saved me man. I wish there were more people like you. Definitely gonna donate to you.
Forkinator said:
WTF!
Dude seriously wtf. It worked! I changed ports, and used a different cable.
I am in awe right now. I don't know what to say besides THANK YOU, YOU GLORIOUS BASTARD!
On a serious note, I don't know why that would have worked. I have always used the port/cable to flash roms. Thanks man, I went to T-mobile earlier and they said i would have to wait till tuesday for a new phone. Going to call them and tell them my phone fixed itself
You really saved me man. I wish there were more people like you. Definitely gonna donate to you.
Click to expand...
Click to collapse
Thank you!!! I definitely appreciate it! Glad I could get you goin again!
joe3681 said:
Thank you!!! I definitely appreciate it! Glad I could get you goin again!
Click to expand...
Click to collapse
Seriously dude. When you go to bed tonight, remember, you helped a dumbass get his phone working(I know you have helped a lot of people)! Should give you warm fuzzies.
Hope that donation went through. Have a good one!
I'm just reading your message and can say I have a s7 cord and it won't even charge my phone anymore so yes
"WACK CORDS MATTER" when it comes to flashing.
g1-and-only said:
I'm just reading your message and can say I have a s7 cord and it won't even charge my phone anymore so yes
"WACK CORDS MATTER" when it comes to flashing.
Click to expand...
Click to collapse
This is so strange though. It must have happened between the last time I changed firmware and now. I always keep my cords in excellent condition and use the ones that came with the phone if possible.