Database Users

Hello All, Guys Im stuck please help me out

I was trying to flash China Developer rom before unlocking bootloader as it is a mandatory requirement.. All the content available for flashing of rom in locked bootloader states that it can not be flashed via fastboot mode. It can only be flashed through download mode in recovery or edl mode. But whenever I try to enter download mode or edl mode, my phone reboots and nothing happens ! Please help me out of this situation if anybody has faced this situation or know s how to resolve that issue kindly come forward and reply ! Thanks in advance

For first you should know that if you write this into the development section nobody will read it. But to answer your question I don't know about this problem from others. You may can try it using miui updater app.
Please, don't spam our development section!

dabi01 said:
For first you should know that if you write this into the development section nobody will read it. But to answer your question I don't know about this problem from others. You may can try it using miui updater app.
Please, don't spam our development section!
Click to expand...
Click to collapse
Thanks for your kind response.. Since you can see I am a junior member therefore i dont know the xda rules and i was not trying to spam your development section..

fix fr ur problem
first download the fast boot mode rom from the official website and the mi flash tool kit
then just extract the file from the fastboot mode zip file..it ll b lik a folder..
now go to mi flash tool kit and select the folder!!!!!
now elnter fastboot mode on ur device>>>volume down+power!!!!!
and hit refresh in ur mi tool kit and press flash!!!!!!
at the boot there will be three options select full data!!!
and ya all your data will go!!!!
and if u are use windows 10/8!!!
you will have to disable the drivers signature enforcement first!!!just search in google or youtube !!!
if any doubt rply i ll help!!:fingers-crossed:

pawanjenu said:
first download the fast boot mode rom from the official website and the mi flash tool kit
then just extract the file from the fastboot mode zip file..it ll b lik a folder..
now go to mi flash tool kit and select the folder!!!!!
now elnter fastboot mode on ur device>>>volume down+power!!!!!
and hit refresh in ur mi tool kit and press flash!!!!!!
at the boot there will be three options select full data!!!
and ya all your data will go!!!!
and if u are use windows 10/8!!!
you will have to disable the drivers signature enforcement first!!!just search in google or youtube !!!
if any doubt rply i ll help!!:fingers-crossed:
Click to expand...
Click to collapse
Thank you for replying..But This method you have suggested is for the unlocked bootloader devices but since the arrival of Redmi note 3, Xiaomi is shipping devices with locked bootloader and can only be flashed in edl mode.. When I try to enter edl mode my device restarts and that problem is persisting with many other users also...

abhi.goel said:
Thank you for replying..But This method you have suggested is for the unlocked bootloader devices but since the arrival of Redmi note 3, Xiaomi is shipping devices with locked bootloader and can only be flashed in edl mode.. When I try to enter edl mode my device restarts and that problem is persisting with many other users also...
Click to expand...
Click to collapse
No bro... its working on locked bootloader.. jst try it..

r_rocky07 said:
No bro... its working on locked bootloader.. jst try it..
Click to expand...
Click to collapse
no bro.. same here also.. tried every method, but still unable to enter EDL mode... seems latest roms don't support EDL mode!!

For entring in EDL mode try to connect your device in switch off mode with pressing of both volume+- together.

winkle_sharma said:
For entring in EDL mode try to connect your device in switch off mode with pressing of both volume+- together.
Click to expand...
Click to collapse
not a single method is working!!

learnerz said:
not a single method is working!!
Click to expand...
Click to collapse
I think devices not able to enter in edl mode is because of Miui 8..

abhi.goel said:
I think devices not able to enter in edl mode is because of Miui 8..
Click to expand...
Click to collapse
yes right bro.. they have blocked it!! EDL mode isn't working in recent versions!
---------- Post added at 07:49 AM ---------- Previous post was at 07:41 AM ----------
wow i have my luck today.. successfully unlocked the bootloader right now!!

learnerz said:
yes right bro.. they have blocked it!! EDL mode isn't working in recent versions!
---------- Post added at 07:49 AM ---------- Previous post was at 07:41 AM ----------
wow i have my luck today.. successfully unlocked the bootloader right now!!
Click to expand...
Click to collapse
Congo bro.. please let us know.. who did you see first when woke up today.. I mean where is the luck is coming from..?

Hello abhi.goel!
I'm here with the same problem.Can't enter download mode.
Did you find any solution?

Download the ROM and copy it in the internal memeory, go to the Updater App and select "Choose update Package" and confirm and wait for 15 odd minutes till it update via recovery.
If you are flashing from stable to Developer ROM than all data will be wiped, so backup the data on external memory before doing this.

see i faced same problem.. i will suggest just flash global developer rom through updater app, register for unlock request, even if you get the approval within 1-2days wait at least 1 week, meanwhile keep trying everyday using miunlocktool.. & keep that in mind, while you are trying to unlock the bootloader your device must be online on i.mi.com, & use your registered phone no to log in in the miunlocktool & your device.. hope it will work for you too!!

razorka1977 said:
Hello abhi.goel!
I'm here with the same problem.Can't enter download mode.
Did you find any solution?
Click to expand...
Click to collapse
Flash developer ROM through updater app then apply for unlocking permission.. once you get permission wait for 7 days then you can unlock BL and install twrp and can do whatever you want to.. good luck

How to put phone into EDL Mode? Nokia X6 China (TA-1099)

I have Nokia X6 (TA-1099) from China but when I downgraded the OS it's gotten hard brick. Someone can help me to put it into EDL mode to I can recover it.

ManhDev said:
I have Nokia X6 (TA-1099) from China but when I downgraded the OS it's gotten hard brick. Someone can help me to put it into EDL mode to I can recover it.
Click to expand...
Click to collapse
hello, did you try an EDL-cable before opening the device?
seems it worked with the Nokia 5 and 6 http://forum.gsmhosting.com/vbb/f296/nokia-5-nokia-6-connect-edl-cable-little-ones-2246357/

meltbanana said:
hello, did you try an EDL-cable before opening the device?
seems it worked with the Nokia 5 and 6
Click to expand...
Click to collapse
Yes. I did but the phone can't boot into 9008. There didn't anything happened

ManhDev said:
Yes. I did but the phone can't boot into 9008. There didn't anything happened
Click to expand...
Click to collapse
I am in the same situation, I flashed manually different partition and got it wrong.
It booted with black screen all the way but QHSusb was working, EDL, emergency.
I soft-repaired, and then thougt it was unbrickable, but I was wrong.
I flash for fun modem.bin and it booted up. But later I flash a big-rom-update-zip in TWRP and then changed the boot-slut from B to A and restarted from recoverymode but DEAD, complete dead, nothing appears on the screen or devicemangar.
then it didn't boot at all.
I have a home-made cable and tried different button-combinations and cable-connected-combination during boot but nothing work.
Either I have destroyed QHSUSB-modem, ( I don't know if it is software related on UFS-storage or if the Qualcom-emergency-MODEM have a different chip that boots up.
Maybe I have incompatible critical-partitions from different rom?!
The last resort is to brake/carefully open the screen-glas on short the electricity from some chips and force the QHS-usb-mode, emergency mode. I have the Firehose.elf file that will help, and the partitions and patch0 file. But need to force boot inte Qualcomm-EDL , But how?
My chip-family-SOC is MSM9889 ta-1012, NB1-softwares-firmwares

I need the Firehose.elf file that will help, and the partitions and patch0 file，can you seed it to me？

short ur motherboard to enter EDL mode... i can provide EDL point if u want... after short the board HS... 9008 drive will show..update the drive to Qloader 9008.. than u can flash ur device with OST tool emergency mode.. choose firmware before july 2018.
Sent from my TA-1054 using Tapatalk
---------- Post added at 05:40 PM ---------- Previous post was at 05:39 PM ----------
ur homemade cable wont work
Sent from my TA-1054 using Tapatalk
View attachment 5013803

[REPAIRED] Dead phone???

Hello people of XDA.
Can someone help me please?
I woke up this morning only to find out that my phone won't turn on.
There's 75% left in the battery before I went to sleep.
I tried pressing and holding the power button but it won't turn on.
I also tried charging but the LED is blinking red.
Any solution? TIA
UPDATE:
After more than a month (because of quarantine/lockdown), I finally had my phone checked and repaired. It turns out it's a hardware problem: POWER SUPPLY.

Can you go into recovery mode? If yes, clean flash the rom otherwise use qfil tool to restore your phone

try to plug charger and check if battery is low even if you left it at 75% before you sleep, then try press and hold power button until it boots
otherwise reboot to recovery and fastboot - from here you can do the steps to recover your data or format the phone

Here is the same problem but in the morning i saw my phone in recovery mode..I tried all the possible solution :
1.Flashing fastboot rom through adb
2.Flashing firware through qfill tool
Better to mentioned that above 2 flash procedure were successful bt in the end of all successful flashing my phone booted into again recovery mode instead of system..
So,if there any other solution please help me..Its 48hours i'm working on it bt in the end i
get nothing but failure..!
---------- Post added at 08:38 PM ---------- Previous post was at 08:35 PM ----------
swarup16 said:
Here is the same problem but in the morning i saw my phone in recovery mode..I tried all the possible solution :
1.Flashing fastboot rom through adb
2.Flashing firware through qfill tool
Better to mentioned that above 2 flash procedure were successful bt in the end of all successful flashing my phone booted into again recovery mode instead of system..
So,if there any other solution please help me..Its 48hours i'm working on it bt in the end i
get nothing but failure..!
Click to expand...
Click to collapse
:crying:

Thank you for your replies.
My phone CANNOT BOOT to recovery or fastboot so I can't use QFIL.
I think the problem is the battery because I tried charging for hours but the charger is not hot to the touch. THE LED IS JUST BLINKING RED.
I will have it replaced after our community quarantine.

Random Member said:
Thank you for your replies.
My phone CANNOT BOOT to recovery or fastboot so I can't use QFIL.
I think the problem is the battery because I tried charging for hours but the charger is not hot to the touch. THE LED IS JUST BLINKING RED.
I will have it replaced after our community quarantine.
Click to expand...
Click to collapse
try qfil
---------- Post added at 05:27 PM ---------- Previous post was at 05:25 PM ----------
Random Member said:
Thank you for your replies.
My phone CANNOT BOOT to recovery or fastboot so I can't use QFIL.
I think the problem is the battery because I tried charging for hours but the charger is not hot to the touch. THE LED IS JUST BLINKING RED.
I will have it replaced after our community quarantine.
Click to expand...
Click to collapse
qfil doesnt require recovery or fastboot mode.
press v+ and V- button at a time and connect data cable.
Note: qfil drivers must be installed

mr.willy123 said:
try qfil
---------- Post added at 05:27 PM ---------- Previous post was at 05:25 PM ----------
qfil doesnt require recovery or fastboot mode.
press v+ and V- button at a time and connect data cable.
Note: qfil drivers must be installed
Click to expand...
Click to collapse
How would you know if it's working?
Do you have Telegram?

Here's what I've done:
1. Installed Qualcomm drivers for Windows.
2. Downloaded/installed QFIL.
3. Launched QFIL.
4. Press vol + and vol - at the same time and connected data cable.
5. QFIL still shows "NO PORT AVAILABLE."

mr.willy123 said:
try qfil
---------- Post added at 05:27 PM ---------- Previous post was at 05:25 PM ----------
qfil doesnt require recovery or fastboot mode.
press v+ and V- button at a time and connect data cable.
Note: qfil drivers must be installed
Click to expand...
Click to collapse
Problem still not fixed. I'm sure "USB debugging" is enabled on my phone.
When I charge or connect my phone via USB, there is no charging animation.

black screen and vibration ??

mr.willy123 said:
try qfil
---------- Post added at 05:27 PM ---------- Previous post was at 05:25 PM ----------
qfil doesnt require recovery or fastboot mode.
press v+ and V- button at a time and connect data cable.
Note: qfil drivers must be installed
Click to expand...
Click to collapse
soufkas said:
black screen and vibration ??
Click to expand...
Click to collapse
no vibration and battery animation when plugging

soufkas said:
black screen and vibration ??
Click to expand...
Click to collapse
no vibration and battery animation when plugging in the charger

same
Random Member said:
no vibration and battery animation when plugging in the charger
Click to expand...
Click to collapse
have the same problem any update on how to solve this XD

My asus zenfone max pro m1 has not been booting since the april 21st update.
It boots completely, asks for pattern to decrypt storage and irrespective of whether or not i enter the pattern, it reboots. Looks like some system services are failing after boot and hence i need to wipe or clean flash the system partition.
Situation:
This is my dad's phone and it wasn't tampered with at all. Unfortunately boot loader is locked and usb debugging is off.
None of my 2 laptops detect it in fastboot or adb in windows and linux. I've installed proper drivers but it doesn't even show up in device manager as unknown or whatever.
It normally enters fastboot and recovery modes.
I did the root integrity check from recovery and it reported 92 files missing and 90 unknown files.
What i tried:
Reinstalling the same update through recovery (makes no difference)
Installing older updates ( recovery doesn't allow)
Factory reset through recovery (makes no difference)
flashing via fastboot (fastboot doesn't detect)
The only thing i did not try is qfil and I'm not doing that because a lot of people have reported losing their IMEI and other hardware information.
Also, I couldn't find a stock qfil firmware they were stock based made by other people.
Asus's update broke the phone. But I don't see a lot of people posting about it. I could use some help.
Thank you
---------- Post added at 04:40 PM ---------- Previous post was at 04:36 PM ----------
axit50 said:
Can you go into recovery mode? If yes, clean flash the rom otherwise use qfil tool to restore your phone
Click to expand...
Click to collapse
The update messed up its own system files. Clean flash means wiping partition and installing again.
How can we do that from stock recovery where it doesn't wipe /system ?
All installations from recovery are dirty.

dev.kasibhatla said:
My asus zenfone max pro m1 has not been booting since the april 21st update.
It boots completely, asks for pattern to decrypt storage and irrespective of whether or not i enter the pattern, it reboots. Looks like some system services are failing after boot and hence i need to wipe or clean flash the system partition.
Situation:
This is my dad's phone and it wasn't tampered with at all. Unfortunately boot loader is locked and usb debugging is off.
None of my 2 laptops detect it in fastboot or adb in windows and linux. I've installed proper drivers but it doesn't even show up in device manager as unknown or whatever.
It normally enters fastboot and recovery modes.
I did the root integrity check from recovery and it reported 92 files missing and 90 unknown files.
What i tried:
Reinstalling the same update through recovery (makes no difference)
Installing older updates ( recovery doesn't allow)
Factory reset through recovery (makes no difference)
flashing via fastboot (fastboot doesn't detect)
The only thing i did not try is qfil and I'm not doing that because a lot of people have reported losing their IMEI and other hardware information.
Also, I couldn't find a stock qfil firmware they were stock based made by other people.
Asus's update broke the phone. But I don't see a lot of people posting about it. I could use some help.
Thank you
---------- Post added at 04:40 PM ---------- Previous post was at 04:36 PM ----------
The update messed up its own system files. Clean flash means wiping partition and installing again.
How can we do that from stock recovery where it doesn't wipe /system ?
All installations from recovery are dirty.
Click to expand...
Click to collapse
I am using custom ROM (MiUI) when my problem happened.

Random Member said:
I am using custom ROM (MiUI) when my problem happened.
Click to expand...
Click to collapse
I have same prob, did you find a solution

phone is dead ( problem mother boad dead ) any aftermarket service or website ?

Mi 9t pro in hard brick,need help!

hello to my friend at xda,i need your help my mi 9t pro get in hard brick it on edl mode 9008 no fastboot and no respone when i press on the power button or volume i search all over the internet and dont find anwser
i tried to flash a stock rom via mi flash but fro some resaon the mi flash tool dont recgnoize my com port of 9008 mode and i have a program and mrt dongle that i paid with edl cable and still the program said to re enter edl and time out and i try this but still don't work if some body here on the forum know to fix it or can help me i really will thank him
here some VIDEO to explain better
----------------------------------------------------------------------------
MI 9T EDL MODE 9008 MI FLASH TOOL NOT WORKING VIDEO
Check out this video:
HTML:
[CODE]https://share.vidyard.com/watch/t2w6yGiMF6n49jeTuEvMmP?[/CODE]
P.S i am sorry about the bad english and thanks again!!!:laugh:

TRY THIS
Check this out change language to english,sorry i am from greece:hhttps://xiaomi-miui.gr/community/index.php/Thread/41710-Xiaomi-MI-9T-K20-HARD-BRICK-RECOVER/[/url]...delete the first h

stelioskromidakis said:
Check this out change language to english,sorry i am from greece:hhttps://xiaomi-miui.gr/community/index.php/Thread/41710-Xiaomi-MI-9T-K20-HARD-BRICK-RECOVER/[/url]...delete the first h
Click to expand...
Click to collapse
thanks my friend:good:, but this not help because the program didn't recgonzie my phone in 9008 edl mode even if the device manger of windows show that my phone in this mode and i can't go to fastboot and buttons not working it really super hard brick i try anything and for now no luck for me:crying:

Did you try pin method to get to edl mode?
---------- Post added at 05:35 AM ---------- Previous post was at 05:25 AM ----------
Or test point

stelioskromidakis said:
Did you try pin method to get to edl mode?
---------- Post added at 05:35 AM ---------- Previous post was at 05:25 AM ----------
Or test point
Click to expand...
Click to collapse
my friend
the phone is already in edl mode when i connect it to the pc it show 9008 qualcomm mode if try without connect to the pc and press the power button Nothing happens and the phone does not respond
so even to fastboot i can't enter it like the phone is not dead because the computer show it in 9008 but the all the program i try like mi flash tool dont even see the phone in edl mode but the device manager of windows show it in 9008 qualcomm mode

I say that because the phone auto edl mode dont work sometimes the com port stays closed try to manualy boot in edl mode with the pins

stelioskromidakis said:
I say that because the phone auto edl mode dont work sometimes the com port stays closed try to manualy boot in edl mode with the pins
Click to expand...
Click to collapse
i try this but still the same the mi flash dont regonize the com port but the device manager show 9008 qualcomm mode:crying:

anyone else maybe can help me with this problem?

Deep flash cable, you can either make it yourself (diy), or buy one. As for the process, it's quite simple. Try search on Youtube. It worked for me when i had this problem long ago.

kaiyuno said:
Deep flash cable, you can either make it yourself (diy), or buy one. As for the process, it's quite simple. Try search on Youtube. It worked for me when i had this problem long ago.
Click to expand...
Click to collapse
i have 2 edl cable and still the same problem it don't regonize the com port in mi flash or it failed on other programs to flash the rom and another thing i was mistake my phone is mi 9t and not mi 9t pro as i think from the begining

have some body find a way to flash xiamoi stock rom for mi 9t via edl with out auth ?,i allready buy a ufi and mrt dongle program and still nothing work

MottiAshko said:
have some body find a way to flash xiamoi stock rom for mi 9t via edl with out auth ?,i allready buy a ufi and mrt dongle program and still nothing work
Click to expand...
Click to collapse
Need pay to any with autorizated account and make the flash vía TeamViewer (in remote), try S-unlock.

dannyzamora said:
need pay to any with autorizated account and make the flash vía teamviewer (in remote), try s-unlock.
Click to expand...
Click to collapse
s-unlock i ask the support they say that xiaomi auth tool is dead i want to understand how people get from xiamoi the auth edl accout ,they buy it from xiaomi or hack the edl?

MottiAshko said:
s-unlock i ask the support they say that xiaomi auth tool is dead i want to understand how people get from xiamoi the auth edl accout ,they buy it from xiaomi or hack the edl?
Click to expand...
Click to collapse
I dont know how they take that auth accounts but today its the only method that i find for this, S-unlock or any russian guys sell the service vía teamviewer.

dannyzamora said:
I dont know how they take that auth accounts but today its the only method that i find for this, S-unlock or any russian guys sell the service vía teamviewer.
Click to expand...
Click to collapse
ok thank you very much!:good:

Mi9T bricked / no OS / no adb / no fastboot /twrp working

Hi, I tried updating to the newest miui.eu release, sadly I couldn't charge my phone after I successfully updated. So I wiped the system to flash the rom I used beforehand. Sadly, now my whole partition couldn't be decrypted and I couldn't access it via USB. So after a while I decided to format data. Now I had a phone with twrp, no data and no access via USB..
I changed the phones usb charging port with no success.
EDL doesnt seem to work either, maybe i am doing it wrong.
I really like this phone, I just repaired the display so I hope it isn't bricked.
Can you help me?
Thanks in advance, if you need further information, just ask!

I'm really appreciate your hardwork ?
Only one solution you have left, open back panel of your phone and find two golden point of EDL mode and then hold two points with joint pin and remember your phone battery should be removed and then connect to pc with hold two golden points now your phone is in EDL MODE then flash with stock rom through mi flash tool and remember inside your pc Modem driver is installed which is required in EDL MODE then that's easier to roll back at initial state of phone ? now your phone work smoothly.
---------- Post added at 01:12 PM ---------- Previous post was at 01:11 PM ----------
I'm really appreciate your hardwork ?
Only one solution you have left, open back panel of your phone and find two golden point of EDL mode and then hold two points with joint pin and remember your phone battery should be removed and then connect to pc with hold two golden points now your phone is in EDL MODE then flash with stock rom through mi flash tool and remember inside your pc Modem driver is installed which is required in EDL MODE then that's easier to roll back at initial state of phone ? now your phone work smoothly.

Check
bCid_diCb said:
Hi, I tried updating to the newest miui.eu release, sadly I couldn't charge my phone after I successfully updated. So I wiped the system to flash the rom I used beforehand. Sadly, now my whole partition couldn't be decrypted and I couldn't access it via USB. So after a while I decided to format data. Now I had a phone with twrp, no data and no access via USB..
I changed the phones usb charging port with no success.
EDL doesnt seem to work either, maybe i am doing it wrong.
I really like this phone, I just repaired the display so I hope it isn't bricked.
Can you help me?
Thanks in advance, if you need further information, just ask!
Click to expand...
Click to collapse
Thus is edl mode test pin points.

bCid_diCb said:
Hi, I tried updating to the newest miui.eu release, sadly I couldn't charge my phone after I successfully updated. So I wiped the system to flash the rom I used beforehand. Sadly, now my whole partition couldn't be decrypted and I couldn't access it via USB. So after a while I decided to format data. Now I had a phone with twrp, no data and no access via USB..
I changed the phones usb charging port with no success.
EDL doesnt seem to work either, maybe i am doing it wrong.
I really like this phone, I just repaired the display so I hope it isn't bricked.
Can you help me?
Thanks in advance, if you need further information, just ask!
Click to expand...
Click to collapse
Edl mode via shorting out the tester point is the only way for you , I beleive your presist or crust partition might have been totally messed up that's why you phone is like this or maybe you didn't enable usb debugging by default luckily your bootloader isn't locked it it was locked then your might have become something like a paperblock of 200grams.

bCid_diCb said:
Hi, I tried updating to the newest miui.eu release, sadly I couldn't charge my phone after I successfully updated. So I wiped the system to flash the rom I used beforehand. Sadly, now my whole partition couldn't be decrypted and I couldn't access it via USB. So after a while I decided to format data. Now I had a phone with twrp, no data and no access via USB..
I changed the phones usb charging port with no success.
EDL doesnt seem to work either, maybe i am doing it wrong.
I really like this phone, I just repaired the display so I hope it isn't bricked.
Can you help me?
Thanks in advance, if you need further information, just ask!
Click to expand...
Click to collapse
Have you tried flashing a rom using miflash https://www.xiaomiflash.com/?

bCid_diCb said:
Hi, I tried updating to the newest miui.eu release, sadly I couldn't charge my phone after I successfully updated. So I wiped the system to flash the rom I used beforehand. Sadly, now my whole partition couldn't be decrypted and I couldn't access it via USB. So after a while I decided to format data. Now I had a phone with twrp, no data and no access via USB..
I changed the phones usb charging port with no success.
EDL doesnt seem to work either, maybe i am doing it wrong.
I really like this phone, I just repaired the display so I hope it isn't bricked.
Can you help me?
Thanks in advance, if you need further information, just ask!
Click to expand...
Click to collapse
i had the same problem years ago with another device ... try to go in twrp press the power botton for 15 sec rebot on twrp format data (not with advanced wipe) and after that a full wipe in advanced wipe.... And look if you solved the encrypt problem.... (Sorry for my bad english)...
---------- Post added at 06:40 PM ---------- Previous post was at 06:17 PM ----------
Yakusha90 said:
i had the same problem years ago with another device ... try to go in twrp press the power botton for 15 sec rebot on twrp format data (not with advanced wipe) and after that a full wipe in advanced wipe.... And look if you solved the encrypt problem.... (Sorry for my bad english)...
Click to expand...
Click to collapse
A lot of time an hard rebot can help... try you can't lose anything ...

I'm curious... let me know if it worked ...
---------- Post added at 08:00 PM ---------- Previous post was at 07:58 PM ----------
Yakusha90 said:
i had the same problem years ago with another device ... try to go in twrp press the power botton for 15 sec rebot on twrp format data (not with advanced wipe) and after that a full wipe in advanced wipe.... And look if you solved the encrypt problem.... (Sorry for my bad english)...
---------- Post added at 06:40 PM ---------- Previous post was at 06:17 PM ----------
A lot of time an hard rebot can help... try you can't lose anything ...
Click to expand...
Click to collapse
I mean with this method...

Yakusha said:
I'm curious... let me know if it worked ...
---------- Post added at 08:00 PM ---------- Previous post was at 07:58 PM ----------
I mean with this method...
Click to expand...
Click to collapse
This method didn't work, I will try the esl option next. I tried it before tho with no success, maybe because I didn't install the qualcomm driver. What could be the problem if my phone still doesn't get recognized?
It's so weird that a software issue causes my phone to not be able to connect to my computer on the recover layer

Try this:. Go in twrp - advanced - terminal - and write reboot edl in the terminal and after that flash the official MIUI rom.... try and let me know...
---------- Post added at 09:00 PM ---------- Previous post was at 08:44 PM ----------
bCid_diCb said:
This method didn't work, I will try the esl option next. I tried it before tho with no success, maybe because I didn't install the qualcomm driver. What could be the problem if my phone still doesn't get recognized?
It's so weird that a software issue causes my phone to not be able to connect to my computer on the recover layer
Click to expand...
Click to collapse
Don't open the phone...

Yakusha said:
Try this:. Go in twrp - advanced - terminal - and write reboot edl in the terminal and after that flash the official MIUI rom.... try and let me know...
---------- Post added at 09:00 PM ---------- Previous post was at 08:44 PM ----------
Don't open the phone...
Click to expand...
Click to collapse
if i type reboot edl in the terminal of twrp, my phone goes into a bootloop, showing the mi.com logo, my computer doesnt recognize anything sadly

Did you try to decrypt in twrp with your account's password?

Yakusha said:
Did you try to decrypt in twrp with your account's password?
Click to expand...
Click to collapse
How to do it?

Yakusha said:
Did you try to decrypt in twrp with your account's password?
Click to expand...
Click to collapse
There is nothing left to decrypt I think. How to do it though(for the next time things go wrong)?

bCid_diCb said:
There is nothing left to decrypt I think. How to do it though(for the next time things go wrong)?
Click to expand...
Click to collapse
With the official rom encrypted when you boot in twrp it ask your password for decrypt... But if you bot in twrp and it don't ask anything then you don't have anything to decrypt...
Try to check the others threads...
I'm pretty sure that you can fix it without open it...
Mouths ago I solved a hard brick on my pixel 2xl that was without fastboot, twrp and pc didn't recognize it... I used a tool for reinstall usb drivers and official rom... I will try to find the guide and send it to you as information...
---------- Post added at 04:24 PM ---------- Previous post was at 03:53 PM ----------
How Windows see you device?... Try to go in device manager and check... if your phone appears in device manager as "QHSUSB_BULK" or unknow device, you have to install the proper driver....
And try this tool https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711

So I tried a lot of things, reboot edl didn't work, Testpoint short-circuit didn't work either.
It's hard to say, but I don't know what happened and I have to say goodbye to my beloved phone. It drives me crazy that I didn't found what happened. I don't even know, if I will flash my next phone.
Thanks for your support, if you want to try your luck, or need a display (2weeks old) or any other part, just pm me.
:crying:

bCid_diCb said:
So I tried a lot of things, reboot edl didn't work, Testpoint short-circuit didn't work either.
It's hard to say, but I don't know what happened and I have to say goodbye to my beloved phone. It drives me crazy that I didn't found what happened. I don't even know, if I will flash my next phone.
Thanks for your support, if you want to try your luck, or need a display (2weeks old) or any other part, just pm me.
:crying:
Click to expand...
Click to collapse
Did you try XiaoMiToolV2 ? When you have all drivers, type in program "my phone is bricked", the program should recognize the phone (turning on in twrp) running in recovery and forcing to fastboot mode.

crt-shadow said:
Did you try XiaoMiToolV2 ? When you have all drivers, type in program "my phone is bricked", the program should recognize the phone (turning on in twrp) running in recovery and forcing to fastboot mode.
Click to expand...
Click to collapse
"No devices found[...]"