can't get out of update process status error7. - Lenovo A6000/Plus Questions & Answers

I install adb and flash recovery from there ans its twrp 3.0.2.0 and I try to flash Nougat v5.8.0 cm14 32bit and it get stuck with error 7,again I flash with twrp for nougat64bit cm14 I get stuck in update process error7. idk what to do now? :crying:
I have reach how it youtube about fixing that by delete starting from "assert"..... till semi-colon but no use. is it with the rom or recovery that has the problem

Wannkmen said:
I install adb and flash recovery from there ans its twrp 3.0.2.0 and I try to flash Nougat v5.8.0 cm14 32bit and it get stuck with error 7,again I flash with twrp for nougat64bit cm14 I get stuck in update process error7. idk what to do now? :crying:
I have reach how it youtube about fixing that by delete starting from "assert"..... till semi-colon but no use. is it with the rom or recovery that has the problem
Click to expand...
Click to collapse
Hello,
Can you please tell us the make and model of your device.
Regards
Vatsal,
Forum Moderator.

Vatsal said:
Hello,
Can you please tell us the make and model of your device.
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
Its a Lenovo a6000 Plus. build number is kraft-a6000_S054_150915

Related

LG G2 D803 CM13 cannot install Google Playstore

Hi,
I have an LG G2 and I've just installed Cyanogenmod 13 on it. Its been a long run, but I've come to the end. But now I have another problem. I cannot install Google Playstore. I've tried with Gapps through recovery, but they ask me to have TWRP, but TWRP cannot be installed on my device since the Canadian version that I have dosen't support Android 6.0. I've tried to install Busybox and retry to install it through recovery. No success. I've tried to remove it manualy in the zip of Gapps, but again not a success. Is there a way to install it without recovery ? Or install TWRP for android 6 on the D803 device ? Or have a Gapps that dosen't have busybox on it ? Or another alternative to Gapps ?
Thanks !
1. I have an LG G2 and I've just installed Cyanogenmod 13 on it
2. TWRP cannot be installed on my device since the Canadian version that I have dosen't support Android 6.0
do u even know what u r doing? do u even know what TWRP is? maybe u should read the CM13, TWRP, and Gapps threads OP again
@MikeChannon - please move this thread in Q&A section... it doesn't belong in accessories... thanks
60nine said:
@MikeChannon - please move this thread in Q&A section... it doesn't belong in accessories... thanks
Click to expand...
Click to collapse
Done.

Is there a custom rom for ZENFONE MAX?

Is there a custom rom for zenfone max ? I just cant find any custom run that can run on my friends zenmax. Please thankyou for your help and for your answer.
The development of CM13 and CM14 is almost done according to the devs on cyanogenmod forums, and will soon be uploaded on xda. See for yourself...
https://forum.cyanogenmod.org/topic...-13-soon-for-asus-zenfone-max-zc550kl/?page=1
Its Great but just courius
is said the some 3rd camera apps may not work but other do right? and is the usb otg is ???? still working ???
Jump here to get the ROMs. CM13 unofficial and resurrection remix available. I have installed CM13 and it's working great.
http://forum.xda-developers.com/zenfone2/general/rom-cyanogenmod-13-0-t3506369
http://forum.xda-developers.com/zenfone2/general/rom-resurrection-remix-t3508694
Hit thanks if I helped!
SIGNED1121 said:
Is there a custom rom for zenfone max ? I just cant find any custom run that can run on my friends zenmax. Please thankyou for your help and for your answer.
Click to expand...
Click to collapse
Hello Friends today iam going to introduce you Asus zenfone max custom ROM cm 14.1. Follow the link below
Dry I don't have permission to post link until I get 10 use full post plz help me tell me how can I give u that
Iam not responsible for your phone brick or boot loop problems ...plz try at ur own risk...
Please press thanks button I I help u
Know bugs
(Not known)
Plz download gapp armx64 7.1 for ur google apps the link is given below
Iam not the developer of this ROM..plz say thanks to developer in downlode page also
abhcha said:
Hello Friends today iam going to introduce you Asus zenfone max custom ROM cm 14.1. Follow the link below
Dry I don't have permission to post link until I get 10 use full post plz help me tell me how can I give u that
Iam not responsible for your phone brick or boot loop problems ...plz try at ur own risk...
Please press thanks button I I help u
Know bugs
(Not known)
Plz download gapp armx64 7.1 for ur google apps the link is given below
Iam not the developer of this ROM..plz say thanks to developer in downlode page also
Click to expand...
Click to collapse
how to fix this error?
E: error executing updater binary in zip.
SIGNED1121 said:
Is there a custom rom for zenfone max ? I just cant find any custom run that can run on my friends zenmax. Please thankyou for your help and for your answer.
Click to expand...
Click to collapse
Yes you can check andriod 7.1 reserrection remix rom there zenfone max supported device written
Welcome in advance
SIGNED1121 said:
how to fix this error?
E: error executing updater binary in zip.
Click to expand...
Click to collapse
Where did u get this error
Sent from my ASUS_Z010D using Tapatalk
im getting same error. how to fix it?
Volte
This Custom Rom Volte Support Or Not
No our device doesn't support volte
Sent from my ASUS_Z010D using Tapatalk
Pls suggest volte supported custom ROM..
pradeep89 said:
Pls suggest volte supported custom ROM..
Click to expand...
Click to collapse
RR mix 7.1 just check it out!!!

plz help

Hi all,
I am in dire need of some help. I wipe / formatted my phone in TWRP. I am now trying to reflash a rom, any rom..., back into my phone.
However when I try flashing in TWRP I get an error
Comparing TZ version TZ.BF.2.c3-2........ to TZ.BF.2.............
assert failed: asus.verify_trustzone("TZ.BF.2.c3-2........") == "1"
My phone asus ZenFone 2 laser zoold
You need to be on stocked MM before you can flash CM13+ based ROM. Go to this link,
https://forum.xda-developers.com/zen...mix-n-t3509698
The fix is found on post number 2. Also, make sure you have the latest twrp.
Edit: What is your phone? Z00L or Z00T?
akhil dadhania said:
Hi all,
I am in dire need of some help. I wipe / formatted my phone in TWRP. I am now trying to reflash a rom, any rom..., back into my phone.
However when I try flashing in TWRP I get an error
Comparing TZ version TZ.BF.2.c3-2........ to TZ.BF.2.............
assert failed: asus.verify_trustzone("TZ.BF.2.c3-2........") == "1"
Click to expand...
Click to collapse
Hey please make sure that you are flashing right firmware
---------- Post added at 02:34 AM ---------- Previous post was at 02:26 AM ----------
Can someone able to make pixelized ui for asus ZenFone 2 laser ze550kl like REDMI NOTE 3...
PLEASE......
THE LINK OF THE REDMI NOTE 3'S VIDEO:
Please sir make it
mg712702 said:
Hey please make sure that you are flashing right firmware
---------- Post added at 02:34 AM ---------- Previous post was at 02:26 AM ----------
Can someone able to make pixelized ui for asus ZenFone 2 laser ze550kl like REDMI NOTE 3...
PLEASE......
THE LINK OF THE REDMI NOTE 3'S VIDEO:
Please sir make it
Click to expand...
Click to collapse
its cm14, and is also available for ZE550KL
bUt u can't use xposed framework if u use it, bcs of WIP,
But how
24imelqui said:
You need to be on stocked MM before you can flash CM13+ based ROM. Go to this link,
https://forum.xda-developers.com/zen...mix-n-t3509698
The fix is found on post number 2. Also, make sure you have the latest twrp.
Edit: What is your phone? Z00L or Z00T?
Click to expand...
Click to collapse
but how SIR ...
I try to flash latest firmware in stoke recovery but no i can't update to mm
Download the the latsts twrp, download the Z00L trust zone fix found on this link(post #2) https://forum.xda-developers.com/zenfone-2-laser/development/rom-resurrection-remix-n-t3509698
Flash the twrp, flash the trust zone fix then flash your ROM, GAPPs. Make sure you download the right files for your device.
thnx
24imelqui said:
Download the the latsts twrp, download the Z00L trust zone fix found on this link(post #2) https://forum.xda-developers.com/zenfone-2-laser/development/rom-resurrection-remix-n-t3509698
Flash the twrp, flash the trust zone fix then flash your ROM, GAPPs. Make sure you download the right files for your device.
Click to expand...
Click to collapse
thanx you so much sir ...
it's working ..
any miui 8 rom for this device plz sent me link
akhil dadhania said:
thanx you so much sir ...
it's working ..
any miui 8 rom for this device plz sent me link
Click to expand...
Click to collapse
I dont think miui 8 is ported in your device but you can make it look like it by finding icons on Google Play.
Hey bro i am asks for the Google boot.img and the set up wizard only this two things for asus ZenFone 2 laser ze550kl.....Not for the rom,I already using RR NOUGAT ROM WITH STOCK GAPPS
I dont have the link for your device's boot.img,
Can you fux it
Sir
I try to flash this ported miui 8 rom for snapdragon cpu
forum.xda-developers.com/crossdevice-dev/android-one-secondgeneration-general/rom-miui-8-v6-7-14-snapdragon-410-t3424407
But ..after flash complet i try to reboot my device ,my device go into fastboot mode!!
You have a any solution for this .plz
Flash twrp and a ROM.

Zui3.5.211_dev [oreo] [8.0] [qfil]

Link to Zui 3.5.211 Developer version for z131 has been posted on lenovo chinese forum. Enthusiasts can try this.
Heres the link to forum post http://club.lenovo.cn/detail/4224906
flash file http://pan.baidu.com/s/1dFfbfK9
password : dj5n
Drive link https://drive.google.com/open?id=1UeYIitSxYOIQUrK3Cx7KlE3qkx0hhpyj thanks to @nmct
Ps: i neither tried this rom nor recommend it just posted as news.
Has anyone tested the build? Is this the QFIL version or the TWRP one? Can I flash it over the ZUI China ROM 3.5.200 DEV TWRP Version? If I can, will the bootloader be locked and internal memory be encrypted? I apologize for asking too many questions.
Can anyone please share it to mega or drive link?
https://drive.google.com/open?id=1UeYIitSxYOIQUrK3Cx7KlE3qkx0hhpyj
There you go.
nmct said:
https://drive.google.com/open?id=1UeYIitSxYOIQUrK3Cx7KlE3qkx0hhpyj
There you go.
Click to expand...
Click to collapse
Is this oreo 8.1?
---------- Post added at 07:35 AM ---------- Previous post was at 07:33 AM ----------
Tirthyawarmachine said:
Has anyone tested the build? Is this the QFIL version or the TWRP one? Can I flash it over the ZUI China ROM 3.5.200 DEV TWRP Version? If I can, will the bootloader be locked and internal memory be encrypted? I apologize for asking too many questions.
Click to expand...
Click to collapse
Its qfil qpst build..
---------- Post added at 07:39 AM ---------- Previous post was at 07:35 AM ----------
Anyone please share screenshots
it is oreo 8.0 not 8.1
http://brisktopia.com/2Q8G
This my help people in decrypting recovery
Flash from zui 3.5.200 to this room result is bootloop
gapps included?
zed923 said:
it is oreo 8.0 not 8.1
Click to expand...
Click to collapse
Sorry for wrong title, i just wrote as i seen there.
can not boot up
dilshad.ep said:
Sorry for wrong title, i just wrote as i seen there.
Click to expand...
Click to collapse
adjust the title
stuck on zuk logo
hendibudi said:
Flash from zui 3.5.200 to this room result is bootloop
Click to expand...
Click to collapse
This is 3.5.211 DEV
stuck on zuk logo . +1
Phone bricked with this
Don't flash it
For new flashers
What to do when bricked
Switch on phone
Wait for 1 minute While zuk logo appears
Use minimal adb
Cmd : adb reboot edl
Yes it works even on bootloop
So phone went to edl mode
Flash other qpst ROM version
Now restart phone
Done happy flashing:good::fingers-crossed:
---------- Post added at 05:36 PM ---------- Previous post was at 04:56 PM ----------
If you successfully flashed this ROM
mention the previous ROM in your phone
I flashed over 3.5.200 it bricked the phone
With zuk logo bootloop
I think this is only flashed with specific version
Checked with different versions still bootloop occurs
Versions checked with are :
2.5.104
3.1.117
3.5.200
Flashing over these ROMs result in bootloop or bricking the phone
But I think based on discussion forum
One user made a difference in features with 3.5.099
So I think it can flashed over 3.5.099
But when I got that ROM I can confirm it
Note: reading different forums I got a overview that 3.5.200 is different version because flashing 3.5.200 over 3.5.099 results in bootloop
So this results in
3.5.099 and 3.5.200 are 2 parallel versions
3.5.099 can be updated or qfil to 3.5.211
3.5.200 didn't get any update or update not revealed
This is only an estimate so dont ask me the source and i was even new to xda i was a tech expert so i estimated it
once checked I can confirm it
Finally we manage zui 3.5.211 dev, with twrp flash zip without bootloop by excluded firmware bootloader from stock rom, but bugs still persist same as zui 3.5.200 dev
hendibudi said:
Finally we manage zui 3.5.211 dev, with twrp flash zip without bootloop, but bugs still persist same as zui 3.5.200 dev
Click to expand...
Click to collapse
Please share the link
ZUI 3.5.218 DEV QPST SCREENSHOTS

Recovery not working

I just flashed the latest version of twrp I.e. 3.2.1.0 which is nesseary for viper os 8.1.0 but the thing is it's not flashing the os showing the error please help me over this
VadirajKK said:
I just flashed the latest version of twrp I.e. 3.2.1.0 which is nesseary for viper os 8.1.0 but the thing is it's not flashing the os showing the error please help me over this
Click to expand...
Click to collapse
You'd have better luck asking this question in the thread for the recovery you're using.
This thread will be reported as it doesn't belong in the development section. However, I'll give you some time to post your question in the relevant thread first.

Categories

Resources