I keep getting error messages about data roaming.
If I set it to "never," get persistent notifications to look at the setting.
I had it set to "exceptions," and Next lockscreen (Microsoft) and their Arrow launcher (use the same core library) produce error message about not being able to use data while roaming.
I can set it to always, but ...
I should not be doing and roaming at all. Have my provider's network outside, WIFI inside.
What is the source of this problem and its solution?
Previous phone was 3G so the provider's 3G is still my "home" network. Their 4G is separate. No added charge, just error messages. They need to help me switch.
Moderator. Might remove this thread. Thanks
Related
Any seen a program that will disable automatic data roaming? If not any one wanna develop it?? Seems like a useful program to have especially when you're traveling and don't want to pay the crazy roaming fees if you accidentally use your data connection.
Any one? Ideas or software recommend?
I'm also trying to find a program that will automatically disconnect / disable data while roaming.
I live near the border of 2 countries and even though I don't pay roaming for calls, my data is not included in roaming which makes it expensive.
at the moment I use nodata modaco to manually disable my data when I'm going over the border, but then I also have to have the phone service manual to avoid roaming without knowing it and being charged for data .
this is annoying because when I lose coverage I have to select it again manually, which happens a lot living near the border.
thank you very much, dan
PocketMax PhoneAlarm (http://www.pocketmax.net/phoneAlarm.html) can do this through profiles. I use this feature and it sure makes travelling abroad a lot easier...no need to worry about remembering to disable data services...
thank you for your suggestion. the problem is that, due to the area where I live, I constantly change from my home network to the roaming one, even without knowing (when the service is in automatic mode). if I use profiles to disable my data with phonealarm I would have to change them all the time depending whether I'm in my home network or not. but some times, the network changes even on this side of the border.
I would have thought that some kind of mortscript would be able to disable data as soon as I moved to a foreign network without having to depend on profiles. therefore , I would not have to worry what network I'm with, because at home data would be active, and as soon as roaming kicked in, data would be disabled. thank you, dan
You can check out http://www.gb-soft.cz/XDAII/products.htm
Hi!
I am looking for a tool to prevent data roaming ONLY: I tried Modaco Nodata but with this one you only can deactivate the connections permanentely...
I am here nere the border so sometimes the network is switching over to the one of the next country. I dont want to switch to "manual" network selection because i want to stay reachable... on the other hand, direct push / data connection should only be active in my home network.
Does anyone of you have a similar problem or a solution for this one?
I set my network to home only and when I travel to Michigan I use nodata to keep data turned off... ever since I haven't received any data roaming charges and my data service is on without worrying about roaming... the downside to this is I cannot take advantage of the extended calling area but oh well if I need to call to US with phone I turn data off and then switch to normal mode....
Not sure if this is the correct forum but I want to be able to turn of roaming completely. I have a US G1 on the three UK network with the US RC33 installed and root. I have disabled data roaming. Here in the UK we're too small a country to want to roam! Coverage is usually good enough from a single network. However, I occasionally get the little 'R' symbol on the single strength icon and an annoying prompt saying I need to turn data roaming on because I lost connectivity. I have to go into the settings and manually select the "3" network again.
What I want is to either be connected to three UK or not connected to anything at all. Is there a config file I can edit to allow this? Would the UK RC8 firmware do this for me?
Thanks in advance for any help.
Doesn't a 3-UK SIM try to roam onto O2 though?
You could set the phone WCDMA only and NOT roam onto a GSM network.
Use AnyCut to shorcut Activity: Phone Info
From there under preferred Network Type; set to "WCDMA Only"
HELP!! Roaming signal won't go away
I have an unlocked G1, JF1.41 v 1.1 and i just updated to the RC33...but this also happened when i had RC30 , v 1.0...
I put in my canadian Fido sim card and everything works fine but i have that little "R" on top of my signal strength bar...
I think this means its data roaming? if this is the case...it should be okay (even though its going to bother me) because my service provider says my EDGE/Data is disabled (i do not have a data plan, NOR do i wish to incur any data charges.. i'm fine with my free WIFI ) .
However, if this means im roaming on another network, i dont want to be incuring any long distance charges on my phone EVEN when im using my own FIDO network..
I went to settings - about phone - status, and here are my specs (some of them):
Network: Fido
Network Type: EDGE
Service state: In service
Roaming: Roaming
Data Access: Disconnected
i'm pretty much just concerned about the ROAMING part of it... my other friends with G1's are with rogers, don't have that little R..
how do i get rid of that?? please and thanks!
Try manually changing the network in Settings>Wireless controls>Mobile networks>Operator selection
G1, like all GSM phones, will roam onto networks specified on the SIM if it can get a better signal. As long as the relevant operator has a roaming agreement in place, there's nothing to be concerned about, other than the R symbol in the status bar.
Mod: move this over to General discussion please.
I did change it and selected my Fido network (it's the only network available).
Thanks. I've set it to WCDMA only so I'll see how it goes.
Please help??? i still have that little R on top!
After I got home I found my phone had lost its connection. It didn't seem to be searching for the network. I had to go into settings, search for networks and then select three again. Is there any way to control if the phone does a search for networks automatically?
Looks like it reconnects to three on its own after a while. I still get the annoying popup about turning on data roaming though
footboydog said:
Looks like it reconnects to three on its own after a while. I still get the annoying popup about turning on data roaming though
Click to expand...
Click to collapse
As has been previously mentioned, Three will "roam" onto another network if it goes out of Three's own 3G network coverage because Three does not run its own 2G network.
However, it isn't O2 anymore, it is Orange as of late 2006/2007. I *believe* that you won't be charged any more if you use data whilst "roaming" on Orange, so whilst you are in the UK it is quite safe to allow data roaming, but I would be inclined to check this with Three.
Regards,
Dave
hello,
after searching on "3G" in the forum, i seems that the problems are just the opposite to my question, they all want 3G to be turned off.
Now I want to connect to 3G (with the "G" icon on the staus bar).
My problem is that it always connect on "edge", with the "E" icon in status bar and when I want to make a video call, it always says that there is no connection to 3G so I can't make videocall.
Anyone knwos how to activate 3G?
I looked into the connections, but I don't want to mess in it without knowing what I do.
BTW I'm in Europe (Belgium).
Thanks
You fell into the same trap I did when I first got a Windows Mobile phone.
G means GPRS and is the lowest, simplest connection speed.
G = GPRS. "Normal" internet speed (9.6-14.4kbps)
E - Edge. "Enhanced" internet speed (normally 48kbps, but can be higher)
3G = 3G internet speed (128-384kbps). Also allows video calls.
H = HSDPA. "Mobile broadband" speed. (1.8Mbps, 3.6Mbps or 7.2Mbps depending on operator).
You'll want to go to:
Start > Settings > Connections > Advanced Network
Make sure that HSDPA/HSUPA is enabled
From then on, it depends on the signal in your area. If you find that you're having a problem getting and maintaining a 3G or H signal, you might need to get an updated SIM from your operator. I got a new SIM from O2-UK and it solved my connection problems immediately.
I see that HSDPA/HSUPA is enabled.
Could it have something to do with the settings in connections (instead of advanced network settings)?
I will also check with my provider (sim card)
Thanks for the reply
i cannot connect to the internet not using wifi. i do however h an H symbol next to my signal. i dont get why i have the hsdpa but cannot connect. i've tried anything i can think of.
*i can't turn data connection on in my comm manager, it automatically disconnects and says wap.cingular not working or gprs not working somthing like that.
*in the connection settings i pick media net wich is automatically picks att but still won't
*in settings/personal/phone i left if auto defualts for bands
*settings/connections/advance network i even tried to put it to hsda ONLY won't work
the only new lead im getting is this Zenith post saying he got new sim card so now it's working. that's all im getting at now. but im even skeptical about that
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
artesea said:
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
Click to expand...
Click to collapse
you wouldn't believe how i found out i had no internet. they say'd it was in the system but it was disabled in thier system. i put in my brothers sims and his work just fine. so i told them to look at whatever his plan is and they switch to what he had. anyways long story short i found out not my settings bc you just auto configure it connectin wizards, and wasn't sims card, it was stupid att. i was getting the H icon but not an H on my signal. anyways its all done now. thanks again guys
I am facing a rather weird problem. You see I don't use data/3G that much, very less in fact, cause every place I use to go have WiFi, still I keep the network mode (which is found under Settings - More networks - Mobile networks - Network mode) at WCDMA/GSM (auto connect), because without it the H+ drops to E (Edge), which is nonsense basically.
But the problem I am having is if I keep that mode to Auto, I mean WCDMA/GSM, then I am having troubles with SMS Delivery Reports! I mean I am getting the delivery reports very late for whatever reasons! The texts are being delivered instantly, yet the delivery report comes very late with a delayed time stamp on it, which is very weird and very annoying for me as I send a lot of messages. But if I switch the network mode to GSM Only then there is no such problem, the SMS Delivery reports are instant! But then again, as I said, switching to GSM only means no 3G/H+ but Edge only.
So I was wondering if there's an app which will change the network mode automatically depending on Mobile Data staus. I mean if I turn on Mobile Data it would go to that Auto Connect mode or WCDMA/GSM and as soon as I disable Mobile Data it should go to GSM Only mode. Is there any app like that?
Thanks in advance.
I'll bet Tasker could do it..
Intelli3G can do that and more. Requires root though.