Database Users

[Q] re-unlock problem. Please help

Installed WP7 successfully, and unlocked it as instructed.
However, didnt have the activation code. So used everything except Windows Live services.
Next day, I got the code from Microsoft and activated my WP7.
But now the phone has been locked, and I cant unlock it. Tried everything mentioned here like setting dates, turning off firewall etc, but no success.
When I run Chevron, it says can't connect with device.
Otherwise, I am able to connect to Zune and transfer media files.
I like the OS, but dont want to be limited by Marketplace only. I want to install apps. Right now, I cant even install from marketplace as I think there is a limit.

Before you quit on this amazing OS,,,been in the same boat as you for the last two days...just fixed not more than two minutes prior to this post.
-Hard reset your phone
-Do nothint with it besides seting up mail account (not live ofcourse or you migh end up attempting to unlock)
-resend certificate and install on phone
-make sure phone synced with zune
-run chevron as administrator and unlock!
-now deploy all the necessary setup tools,,,Connection setup, XMDMoDDeployer, and Touch explorer,,,finish set up process like you did before.
-use activation code and vwalaa!!!
And by the way,,what ever you do do not try the stop chevron Unlocking reg edit. It has been reported to be the cause of this annoying issue.....and besides you are better off unlocking everytime you wish to deploy an up with chevron than trying to do the initial rom setup and unlocking.,,,if you know what I mean.
Hope this helps.

First read this
a) Make sure you properly install the certificate from your email.
b) Make sure you run the xaps after install and extract then move the file correctly.
I would say a good 85% of cases where you either cant unlock or your phone relocks is because of the above to issues. There are other factors but the above imo are the two mains ones.
PS.. This is NOT the Q&A/General forum , this is the dev forum, please do not post here again.
bigtall10 said:
And by the way,,what ever you do do not try the stop chevron Unlocking reg edit. It has been reported to be the cause of this annoying issue.....and besides you are better off unlocking everytime you wish to deploy an up with chevron than trying to do the initial rom setup and unlocking.,,,if you know what I mean.
Click to expand...
Click to collapse
Sorry but thats just bullsh*t.

TheATHEiST said:
Sorry but thats just bullsh*t.
Click to expand...
Click to collapse
Ummm, not BS, something is causing a re-lock, but setting the PortalUrlProd and PortalUrlInt to invalid values makes ChevronWP7 fail no matter what... Read this thread: For those who can't unlock anymore using ChevronWP7, here's why!
DanielNTX said:
I wrote this inside of another thread, but decided to make a new thread because others may not find it or read it. For those who have tried everything, this is the reason why you can't unlock the phone unless you do a full reset:
The majority of the failures to unlock your phone again is because you used a registry script that changed the HD2 to identify it as an HD7 and may have included registry entries that set PortalUrlProd and PortalUrlInt to 127.0.0.1 or a Null value and somehow your phone became relocked. Once it's set this way, no matter what you do to unlock the phone it won't work because the proper server to query is "developerservices.windowsphone.com" is not defined on the phone. ChevronWP7 works by hijacking and spoofing the address of developerservices.windowsphone.com to be your local computer and then responds appropriately over port HTTPS (443) to the phone.
From this post, Microsoft/ChevronWP7 responds with this:
Code:
<DaysLeft>365</DaysLeft>
<AppsAllowed>10</a:AppsAllowed>
If you set it to 127.0.0.1 in the registry this references your phone when it tries to unlock. The phone itself is not running a spoofed HTTPS server so it will never work. Setting it to null means it doesn't no where to go either. If your phone is working in Zune and you hit the end button on the phone, you will notice ChevronWP7 will report that the phone is pin-locked, this means ChevronWP7 knows about the phone, but the "uh oh - Please make sure it's connected using USB, Please start the Zune application" message it generates is kind of ambiguous and is not the actual error we are seeing here.
The original values are these:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"="https://developerservices.windowsphone.com/Services/WindowsPhoneRegistration.svc/01/2010"
PortalUrlInt"="https://developerservices.windowsphone-int.com/Services/WindowsPhoneRegistration.svc/01/2010"
and the corresponding certificate is this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's how the phone can trust the HTTPS connection because you imported the certificate.
Now if you change the URL to something else, you will need a corresponding certificate. You can make one with makecert.exe or makessl.exe form the various resource/development toolkits out there on the Microsoft website.
In my example, I'm going to use a site that doesn't exist "developerservices.unlock.me". You should change the PortalUrlProd and PortalUrlInt on the phone as follows:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"="https://developerservices.unlock.me/Services/WindowsPhoneRegistration.svc/01/2010"
"PortalUrlInt"="https:/developerservices.unlock.me/Services/WindowsPhoneRegistration.svc/01/2010"
Now in your hosts. file in \windows\system32\drivers\etc folder, you should set up an entry for developerservices.unlock.me with your computer's own IP address.
Once you do you need to install a new certificate on the phone for whatever host in the URL you made and you will be able to use ChevronWP7 to unlock incase it ever locks you out again.
To simplify the making a self-signed certificate portion, I've created a cert for "developerservices.unlock.me" with the validity date of 1000 days. It's included in this post. Hope this helps you all with maintaining an unlocked Windows Phone 7 and understanding why ChevronWP7 won't unlock anymore.
Click to expand...
Click to collapse

i am in india what radio I need to use in india bsnl network

please help me what radio for India bsnl network for 3g

[q] help: Mms, internet, nav, on flashed evo

OK, I bought a Evo Flashed to Metro PCS from someone. I simply did *228 and was able to activate the phone. When you activate like this, you wont get MMS and Internet working, just talk and text. Can i get this working myself? IF so what steps do I take?

wow thanks for the help

Metro pcs flashing hope this helps
rwalkerfla said:
OK, I bought a Evo Flashed to Metro PCS from someone. I simply did *228 and was able to activate the phone. When you activate like this, you wont get MMS and Internet working, just talk and text. Can i get this working myself? IF so what steps do I take?
Click to expand...
Click to collapse
1. Make sure you have all the drivers need for the phone.
USB Drivers Download
USB Drivers for rooting
DIAG Driver Download
64bit drivers
32bit drivers
2. Make sure your phone is rooted
2.3.3 root click here
revolutionary.io
Please make sure to insert the beta key at it before installing it.
Beta key will appear once you click the download button.
2.2 root click here
3. Once successfully rooted next step is to download the software needed. I will add links as they are needed.
4. Ok before this flashing process starts you have to get call and text on your phone. One way is to go to a corporate metro store and second one you know those who need second way.
5. Assuming that you have your phone rooted you need to download this rom and then copy it to root of your sdcard.
Download Custom MetroPCS ROM here
6. Install above rom from recovery. To get to recovery mode turn off your evo. Press and hold the volume down key and press the power key. From the hboot menu using volume key goto recovery and press the power key. You should be in recovery menu. click wipe data and also click wipe cache. Click install zip from sdcard and look for file you copied to sdcard.
After installation is done reboot the phone, first boot will take longer time.
Download and install this app MslReader. Easy way is to copy it to sdcard and then using astro file manager install it.
Once installed open the app on your phone and read your MSL Code.
7. Install QPST (Click here to download) and install it.
Follow it to get the internet fixed
1. Go to your phones dialer and dial ##3424#
2. Plug in your phone to the computer
3. Go To Device Manager and there should be a unknown device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Right Click on The unknown device and Click on Update Driver Software
5. Click on the 2nd Option
6. Browse to the folder where you downloaded the drivers
7. Let It Install
8. Once It Installs, depending If Your system is 32 Bit Windows xp through 7 or Windows Vista or 7 64 Bit the place where you'll see the port will be different.
For 32 Bit, In Device Manager Check under communication Port and you'll see
the port for your device
For 64 bit, In Device Manager check under Modems and right click on the HTC Modem and go to properties. Go to the modem tab and you'll see your port there
1. Now Open Up QPST Configuration
2. Click On Add New Port
3. Uncheck the box that says Show Serial etc etc
4. This is what it should look like after you add port
5. Go To Start Clients and click on Service Programming
6. This will pop up just hit ok
7. This Is the next window that will come up
8. Click on Read from Phone and enter your SPC Code (This was the code found in the MSL Reader app, usually its 000000)
9. Once it reads the contents from your phone, there will be a check box on the right side that says SPC Change Available. Check the box and change your the area that says Service Programing to 6 Zero's. Don't hit write just yet
10. Go to roam tab click browse and choose metro prl.
11. Go To the Display Tab and Change It To MetroPCS
12. Go To The M.I.P. Tab and copy the settings in my picture and be sure to set it to SIMPLE IP! Right now its set to MOB+Simple IP on stock HTC Phones
13. Now Click on the profile 0 and hit edit
Copy all the settings that are displayed in my picture. In NAI and Tethered NAI type (Your10DigitPhone#)@mymetropcs.com. In HA Shared Secret and AAA Shared Secret click on enter text string and type "metropcs" without the quotes in lowercase.
14. Now do the exact same thing for Profile 1.
15. Go To the PPP Config Tab Now and copy all the settings displayed in the Screenshots
16. Still while in the PPP Config Tab go to UM Section and copy the settings exactly
Now for Tethered Nai and User ID type in your
(your10digitPhone#)@mymetropcs.com
For you password go to this website and type in your MEID or ESN in the box labeled "Calculate." Once you calculate your password(it will be called MetroPCS MSL) enter into your password box. You may find this on the top of QPST Service programming window. If you look at the pictures its the numbers located on top that are blurred out.
17. One You Have finished in the UM Section of the PPP Config tab go to the AN Tab copy the setting listed in the Screenshot.
This Time you cant enter anything in the tethered nai but in USER ID enter once again (your10digitphone#)@mymetropcs.com and the same MSL password you used before in the last tab.
18. One Finished Hit Write to Phone. Your phone will reboot after its done. If You Get an Error don't worry just ignore it and reboot your phone.

[Q] How do you get the Hidden menu dial codes to work??

I have a Verizon Galaxy Note 3 that i purchased from my brother. Theres no issues with IMEI or insurance or cancelled past due accounts. I pop in my Tmobile unlimited LTE sim card and i get LTE speeds without rooting or switching to band 4. Every now and then it will revert back to HSPA Plus speed but rarely. %99 of the time its on LTE. Only thing i did was put the correct APN for Tmobile LTE. So its great that the Verizon Note 3 works right out the box for Tmobile LTE. I want to enable AWS and Band 4 anyway. So i Root the phone using the new Toweroot method which was as easy as clicking a link and thats it. The phone is rooted. Heres my problem: I try and enter the code in the dialpad the *#2766336837# and nothing happens. I re-enter the code and press send this time and i get the error message "Connection Problem or Invalid MMI Code" Why is this happening? Is there a prior step i am missing?? I read about efs/carrier switch to enable this from off to on but how do i access it?? Please note that the tmobile sim card is in the phone when i attempt to do this. Should there be a verizon sim in to do this??
All the help would be appreciated.

Samsung disabled most of the dialer codes for the Note 3, including the service menu.

danpedraza said:
I have a Verizon Galaxy Note 3 that i purchased from my brother. Theres no issues with IMEI or insurance or cancelled past due accounts. I pop in my Tmobile unlimited LTE sim card and i get LTE speeds without rooting or switching to band 4. Every now and then it will revert back to HSPA Plus speed but rarely. %99 of the time its on LTE. Only thing i did was put the correct APN for Tmobile LTE. So its great that the Verizon Note 3 works right out the box for Tmobile LTE. I want to enable AWS and Band 4 anyway. So i Root the phone using the new Toweroot method which was as easy as clicking a link and thats it. The phone is rooted. Heres my problem: I try and enter the code in the dialpad the *#2766336837# and nothing happens. I re-enter the code and press send this time and i get the error message "Connection Problem or Invalid MMI Code" Why is this happening? Is there a prior step i am missing?? I read about efs/carrier switch to enable this from off to on but how do i access it?? Please note that the tmobile sim card is in the phone when i attempt to do this. Should there be a verizon sim in to do this??
All the help would be appreciated.
Click to expand...
Click to collapse
Try Advance Signal Status on google play

danpedraza said:
I have a Verizon Galaxy Note 3 that i purchased from my brother. Theres no issues with IMEI or insurance or cancelled past due accounts. I pop in my Tmobile unlimited LTE sim card and i get LTE speeds without rooting or switching to band 4. Every now and then it will revert back to HSPA Plus speed but rarely. %99 of the time its on LTE. Only thing i did was put the correct APN for Tmobile LTE. So its great that the Verizon Note 3 works right out the box for Tmobile LTE. I want to enable AWS and Band 4 anyway. So i Root the phone using the new Toweroot method which was as easy as clicking a link and thats it. The phone is rooted. Heres my problem: I try and enter the code in the dialpad the *#2766336837# and nothing happens. I re-enter the code and press send this time and i get the error message "Connection Problem or Invalid MMI Code" Why is this happening? Is there a prior step i am missing?? I read about efs/carrier switch to enable this from off to on but how do i access it?? Please note that the tmobile sim card is in the phone when i attempt to do this. Should there be a verizon sim in to do this??
All the help would be appreciated.
Click to expand...
Click to collapse
1- I'm not sure what is this code used for, but it seems the correct code is 27663368378, not 2766336837 (?)
2- Do you have a screenshot if this code was entered successfully? If yes, I can make a shortcut directly to this feature without entering the code.
3- Anyway, you can enable the hidden menu by follow this guide:
3.1- Make sure the file hiddenmenu.apk is present in the /system/app/ folder.
3.2- Install Terminal Emulator from the Play Store.
3.3- Enter the following commands:
Code:
su
echo -n ON > /efs/carrier/HiddenMenu
3.4- Reboot your device.
3.5- Try to enter these codes: *#06#, *#0011#, *#27663368378# (my suggested code) OR *#2766336837# (your original code) and see if it works.

Thanks. This method worked I am now able to access the service menu and change to band 4 but I noticed that band 4 was already active so much for that.
Sent from my SM-N900V using XDA Free mobile app

danpedraza said:
Thanks. This method worked I am now able to access the service menu and change to band 4 but I noticed that band 4 was already active so much for that.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
Could you send me the file /system/app/hiddenmenu.apk ?
I want to get this code worked for my phone. Thanks

Where do I fine that file
Sent from my SM-N900V using XDA Free mobile app

danpedraza said:
Where do I fine that file
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
In the /system/app folder
Sent from my SM-N9005 using Tapatalk

You can get all available secret codes in your device by using Shortcut Master app --> 'Secret Code Explorer' menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

SM-N900V StraightTalk Jasmine Rooted APN Setting menu HELP???

This is a SM-N900V Verizon Note 3 On StraightTalk.
Updated to Jasmine from lollipop via flash fire and odin, apn went to a verzion apn, it removed he original TRACFONE.VZWENTP apn...
You can't edit the apn with the verizon sim card.
*28890 won't work. it says
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All settings are greyed out.
This is a screen shot after I put the att sim in and change the settings and rebooted with the Verizon/straight talk sim.
If you put in a ATT sim then you can add/change the apn info. (that's what I did to get around the problem)
You can also delete /data/data/com.android.providers.telephony/databases/telephony.db then reboot and some say you can add a new APN but it doesn't work for me.
it adds telephony.db when rebooted and the standard Verizon APN is in there and nothing can be changed, it's all sill greyed out.
I also heard you can add to apns-conf.xml and when you have global selected it will find the apn, nvr tryed it, i want my menu ungreyed, I have root so whas he problem?
lol
Anyone figure this out yet?
My question is How do you just make the apn menu ungreyed while running a sim for verizon so you can change what u want?
EDIT: BTW if ur running on straighttalk on lollipop the menu is till greyed out.
I have root, Es File Explorer, Root Browser, SQL Editor, What file do I have to edit?
TIA for Everyone's Help, N I hope this helps someone else...
Anyone? Anyone?
I've been searching all over and haven't seen a way.

Ok Days and Days of reading and I came up with this to allow you to edit your apn's in the SM-N900V lollipop 5.0 apn menu with a Starighttalk Verizon sim... (Still doesn't work correctly on the SM-N900V, looks like it works on other phones tho.)
FYI this is a Version Note 3 SM-N900V with a Straight Verizon Sim, If you put in a ATT Sim you can change APN settings...
Here's my original Settings For the SM-N900V on straight talk with the Verizon sim.
Notices how all the settings are greyed out...
You need root then you can change Authtype from -1 to Authtype 0 Via SQLite Editor from play store so you can edit apn's via the apn menu.... (I have the free version, from what I read you need the pro version)
I have Authtype in my /data/data/com.android.providers.telephony/databases/telephony.db when looking in SQLite Editor(free ver).
As you can see in the Red Line Box these are my settings...
If you change Authtype VIA SQLite Editor (free version) you will get.
As you can see it changed from the -1 to 0, but it also changed the carrier_enabled to "True" and modem_cognitive to "False"
When you reboot the phone the APN will not work because of the true & false it should remain 1 and 0, I think the free version does this to make people buy the pro version of SQLite Editor.
SQLite Editor and all the other one's I tryed for free only have a check mark, they will not let you edit the line yourself. so you will end up with a true or false instead of a 1, or 0
I figured I would edit the file On Windows 7 with a free editor...
SQLiteDatabaseBrowserPortable_3.8.0_English.paf.exe (toss is in Google you'll find it...)
When I edited VIA SQLiteDatabaseBrowserPortable_3.8.0_English.paf.exe I changed the Authtype and the sim slot to 0 instead of -1
It changed everything I asked it to.
Phone boot's up as normal and works fine.
When I go back to my APN settings it's still greyed out, Phone works #1 tho. I got 4g net and can do sms/mms.
Does anyone know whats going on with this? Why can' I ungrey my APN menu in lolipop or jasmine when I have root?
BTW if your gonna try to edit ur APN Just keep a copy of your /data/data/com.android.providers.telephony/databases/telephony.db on ur PC, if something get's mess up you can always copy it on the root of ur phone then copy to /data/data/com.android.providers.telephony/databases/ Via Root Browser or ES File Explorer (if you have root), Both are free on the play store. (They have ad's)
TIA for any help n I hope this helps someone else.
<BTW Admin's, IF this is in the wrong place please move it for me, TIA, otherwise I'll have to repost in the Verizon section, you can also remove this line>

BTW adding ,dun to apn type in the settings doesn't let wifi tether work on the SM-N900V Lollipop/root with straight talk. I tryed many ways... Jasmin works just fine for wifi tether tho...

SM-900V (Note 3 Verizon on ST) Greyed out Fix
1) backup device , I use super backup
2) use Odin from 4.4.2 to stick 5.0
3) use Arabic tool app to root 5.o lollipop
4) install/use flash fire for jasmine 6.1
----- above steps may not be ne eded----
6) boot into recovery and wipe cache and factory reset (volume up, power, home)
Keep straight talk verizon Sim card in.
7) Set up phone with no WiFi or data on. This will show you what settings ST has on server for APN.
8) After basic set up , (no Gmail account etc no Internet access) go to settings more mobile , APN.
9) Should see t he greyed out settings. Write them all down. Adding LTE as bearer at the end.
10)*important step* put phone in airplane mode and shut down.
11) pull battery and Verizon ST Sim card , keep Sim card out , put in battery start as normal.
10) ignore the no Sim card message. Say OK.
11) go to the more mobile , from settings. Mobile network will be greyed out. *important*
Turn off airplane mode by swiping down and immediately select the mobile networks sections once it's not grey. (I did it as fast as I could just in case)
12) You will see basic Verizon APN or the standard verixon internet greyed out. Select the plus on top right.
13) Now add everything you wrote down from step #9 remembering to add LTE as bearer. (Notice that the APN on/off is still greyed out but it has a green check and says LTE on or active.)
14) save APN. Note: it will not show up and it will seem like nothing has changed. Power off device and put Verizon ST Sim card in.
15) upon boot LTE should be working.
16) restore apps and other things we with super backup. I hope this works. For you. Sorry if any typos. I wrote this from the phone minutes after fixing it.
Jasmine 6.1 recommended. Mobile Hotspot active , no root loss, super user , mms, and 4G LTE all active.
My APN (yours maybe different)
Name: straight talk
apn: TRACFONE.VZWENTP
mcc: 311
mnc: 480
apn type: internet
apn protocol / roaming: IPv4/IPv6

Get Update from different carrier using SmartSwitch [Canadian]

This guide is for Canadian S6 and S6 edge owners who are with Rogers or Fido since the been waiting for Marshmallow update forever. However, This should work for for others as long as the TWO CARRIERS share the exact phone model, which is the case for all s6 in canadian market.
DO it on your own responsibility
Doing this will not delete your data or trigger knox ... However, its wise to backup with SmartSwitch before attempting so.
1- I assume that you running windows and have latest version of samsung smart switch installed (I tried it on Windows 10)
2- install Fiddler (Its used to capture HTTP traffic and we will use it to be man-in-the-middle between Smartswitch and Samsung servers)
https://www.telerik.com/download/fiddler
3- Install FiddlerScript Editor (we will use to write and edit script rules)
http://www.telerik.com/download/fiddler/fiddlerscript-editor
4- Open Fiddler go to Rules --> customize rules
delete everything and past whats in the txt file in the attachment
5 - In this we are interested in only two functionsin that script
the contact from SMARTSwitch to the Sever: Here instead my phone identify itself as Fido phone "FMC" to the server it pretend its Kodoo phone "KDO"
Code:
static function OnBeforeRequest(oSession: Session) {
if (oSession.uriContains("NF_DownloadBinaryInform")){
oSession.utilReplaceInRequest("FMC", "KDO");
}
}
the contact from the server to SMARTSwitch: Here i get replay from the server for Kodoo phone "KDO" but i pass it to SmartSwitch as Fido phone "FMC"
Code:
static function OnBeforeResponse(oSession: Session) {
if (oSession.uriContains("NF_Download")){
oSession.utilReplaceInResponse("KDO","FMC");
}
}
6- Now safe and restart Fiddler
- Also when you open Fiddler go to File -> Capture traffic
make sure its checked
- Also make sure that fiddler can access HTTPS traffic by going to Tools--> Fiddler options --> HTTPS tab
make sure that 'capture HTTPS connect" and "decrypt https traffic" are both checked
7- Another thing worth mentioning, in Smart Switch > More > Preferences > Software update you have to deactivate Latest software Pre-Download
if you keep that option checked, the download will start in background before you click the update button, and procedure will end in error too;
8- Start SmartSwitch and plug your phone.
9- Click on the Update button
10- after Smart switch is offering the update download, accept the terms of update, then immediately when download start preperation, fidller must be closed. it is very crucial that Fiddler be turned off at just the right time otherwise you will get an error ;
Note: those are the codes for Canadian Carriers:
- Fido: FMC
- Koodo : KDO
-Rogers: RWC
-Bell: BMC
- Wind: GLW
-Telus: TLS
- Virgin: VMC
-Sasktel: BWA
-EastLink: ESK
- Vidéotron: VTR
This page will show you latest update from carriers for the S6
http://www.sammobile.com/firmwares/database/SM-G920W8/

How do I find out, from which carrier do I have my phone? I am using unlocked Canadian S6 in Czech Republic.

This method worked for me on Rogers Galaxy S6. I am currently running 6.0.1. I used TLS as the update carrier.

rychlin said:
How do I find out, from which carrier do I have my phone? I am using unlocked Canadian S6 in Czech Republic.
Click to expand...
Click to collapse
In the latest Smart Switch, when you plug in your phone it will show your carrier abbreviation letters

rychlin said:
How do I find out, from which carrier do I have my phone? I am using unlocked Canadian S6 in Czech Republic.
Click to expand...
Click to collapse
If the phone is not rooted, only unlocked... then you should have some apps on the phone from the carrier still. If you are with Rogers, there will be Rogers apps on the phone, if you have a Bell phone then Bell apps... etc, etc

4walls said:
If the phone is not rooted, only unlocked... then you should have some apps on the phone from the carrier still. If you are with Rogers, there will be Rogers apps on the phone, if you have a Bell phone then Bell apps... etc, etc
Click to expand...
Click to collapse
You're right, I have some Rogers applications installed, but disabled.

My Rogers S6 updated quite nicely with this method. I used TLS as the provider in the script attached to the first post.
I had to try this a couple of times to get Fiddler turned off at the right time. Eventually it started downloading the update though and then it all worked great. I just did the update today, but everything seems to be working fine so far.
I used a Windows 10 computer and ran the Fiddler program and Smart Switch by right-clicking and running as administrator. I also used the WINCONFIG button on Fiddler and "enabled all" in that dialog box. Not sure if that is what made the difference. Also, after installing Fiddler and configuring the script with the TLS and RWC changes, I restarted the computer just to make sure all changes took effect properly.
Also updated Smart Switch to the latest version.
Good luck...

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am using this version, flashed a few weeks ago via Odin, is it the latest version I can get, or there is already newer one?
Thanks for your help guys!

This page will show you latest update
http://www.sammobile.com/firmwares/database/SM-G920W8/
for now Sasktel (BWA) and EastLink (ESK) seems to have the latest update

Does it change the CSC after update or leave your original CSC?
Sent from my iPhone using Tapatalk

LNJ said:
Does it change the CSC after update or leave your original CSC?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
We only trick samsung servers that your phone belong to a different carrier thats all, so if the update has new CSC you also get the new one. so when later your own carrier release an update you will still get it over the wifi

LNJ said:
Does it change the CSC after update or leave your original CSC?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Here is what mine looks like after using the TELUS firmware: