Database Users

[ROOT/TWRP] Asus Zenfone Go ZC500TG/Z00VD

First and all, DO THIS AT YOUR OWN RISK!*Credits goes to the devs of 4pda.ru for discovering this method and to Pedro Fortunato for sharing the link.
REQUIREMENTS, PREREQUISITES
Computer, Laptop will do.Asus Zenfone Go Unit - obviously
Adb drivers -*https://mega.nz/#!2scCERxC!gbNd6tJcrUAkn4nv7kU2DBsnSEv8G6-GfZVVl9g97fI download this.
ADB, Root file, Twrp - https://mega.nz/#!HtN03SCa!WxQJ3a33C0XkuE20qv0rYwvxcYrGxZtMk-4jQeL1ykU
Methods
1. PREPARE THE FILES ON YOUR COMPUTER AND PHONE
a. On your computer, Install ADB drivers and extract the files on the given link. To Install the driver, extract the one given from the link and right click on android_winusb.inf and select install. Another way to install it is to download from adbdriver.com and download th ADB Driver Installer.​b. On your device enable developer option by tapping build number on about phone.​c. Go to Developer options - turn on Allow OEM Unlocking and Usb Debugging.​2. UNLOCK YOUR BOOTLOADER
a. Turn off your devices.​b. Press Volume up + power simultaneously to go to the bootloader​c. Use volume up to navigate and navigate to fastboot, select by pressing volume down​d. On your computer, go to the extracted file (the one i provided from mega.nz) and press shift + right click, the select open command window here.​e. Once on the command prompt type​fastboot devices​f. if your device appeared (denoted by serial number and device) type​fastboot oem unlock​g. on your device, follow the on screen instruction, press volume up to agree on unlocking bootloader​NOTE THIS WILL FORMAT YOUR DEVICE SO MAKE SURE YOU ENSURE YOU BACKED UP
h. Wait for it to return to fastboot mode.*Reboot. If you cant reboot it, reinsert battery and turn it on, it will now format your device. It will usually take time to boot so be patient.​i. Once booted go back to developer options again and enable oem unlock and usb debugging.​3. FLASHING TWRP RECOVERY
Done with unlocking? Lets proceed to flashing TWRP RECOVERY.​[WARNING AGAIN: DO THIS AT YOUR OWN RISK. DOUBLE CHECK THE FILES, DOUBLE CHECK THE*COMMANDS THAT YOU TYPE]
a. On your pc, again go to the extracted file, open the command prompt as instructed before and type this​ adb reboot bootloader​b. Your phone will restart to bootloader again, select fastboot again. Dont close the cmd.​c. On the command prompt type​fastboot flash recovery recovery.img​d. It will now flash the twrp. Ensure that the recovery is flashed correctly.​e. Reboot to recovery by holding volume up + down + power to shut it down without removing rom pc and by pressing vol up and power to boot to bootloader and selecting recovery.​f. IF YOU ARE NOW ON THE TWRP. CONGRATS. You have only one thing to do. Flash the root package.​4. FLASHING THE ROOT PACKAGE
a. Boot your phone and copy the root package to your internal storage.​b.Reboot to TWRP Recovery, once there select install and browse for UPDATE-SuperSU-v2.46.zip you just copied, swipe to install. Then viola! YOUR PHONE IS NOW ROOTED.​
AGAIN, I WILL NOT BE HELD LIABLE IF YOUR PHONE DIED, EXPLODED, ATE YOU OR COMMITTED SUICIDE. AGAIN AGAIN. ALL CREDITS GOES TO THE DEVS OF 4pda.ru especially Jemmini for the TWRP Recovery

Yea please there's more people looking for it here at xda

me too I have the same problem! any solution? please help and happy new year!

yes please

Yeah im waiting too , please where people that knowledge about root please makes for asus zenfone go

How root asuse zenfone go?

I think we should root this phone like rooting other mtk devices
sorry for my bad english

keityrobins said:
Hello. I would like to ask for help about our phone. As of now there are no working rooting method available and we cannot move apps to sd since asus disabled that option, our internal storage is therefore limiting us to install more apps. Anyone knows how to root it would be of great help.
Asus Zenfone Go has MT680 chipset running android 5.1.
Click to expand...
Click to collapse
Hello! There was a fully working right way to get Root! The forum 4pda found a solution to this problem :good:

it seems the Russians have done it
http://4pda.ru/forum/index.php?showtopic=698725&view=findpost&p=45947797
would anyone like to try?
please post feedback here!

burovik26 said:
Hello! There was a fully working right way to get Root! The forum 4pda found a solution to this problem :good:
Click to expand...
Click to collapse
will try

pedrofortunato said:
it seems the Russians have done it
http://4pda.ru/forum/index.php?showtopic=698725&view=findpost&p=45947797
would anyone like to try?
please post feedback here!
Click to expand...
Click to collapse
will try and feedback

THE TWRP WORKED. However the root package i had didn't installed the su binary and superuser cannot install it, will try more. Here is the link to the twrp - ftp://1 09.87.84.155/Asus_Zenfone_Go/Recovery/TWRP/2.8.7.0/recovery.img - remove the space between 1 and 0

guys it worked. rooted mine now.

keityrobins said:
guys it worked. rooted mine now.
Click to expand...
Click to collapse
could you make a step by step in english?
and does it erase all data on the phone?

pedrofortunato said:
could you make a step by step in english?
and does it erase all data on the phone?
Click to expand...
Click to collapse
Will do. Thanks for linking And yes on unlocking the bootloader part, it will erase your data.

where should i post the tutorial?

First and all, DO THIS AT YOUR OWN RISK!*Credits goes to the devs of 4pda.ru for discovering this method and to Pedro Fortunato for sharing the link.
REQUIREMENTS, PREREQUISITES
Computer, Laptop will do.Asus Zenfone Go Unit - obviously
Adb drivers -*https://mega.nz/#!2scCERxC!gbNd6tJcrUAkn4nv7kU2DBsnSEv8G6-GfZVVl9g97fI download this.
ADB, Root file, Twrp - https://mega.nz/#!HtN03SCa!WxQJ3a33C0XkuE20qv0rYwvxcYrGxZtMk-4jQeL1ykU
Methods
1. PREPARE THE FILES ON YOUR COMPUTER AND PHONE
a. On your computer, Install ADB drivers and extract the files on the given link. To Install the driver, extract the one given from the link and right click on android_winusb.inf and select install. Another way to install it is to download from adbdriver.com and download th ADB Driver Installer.​b. On your device enable developer option by tapping build number on about phone.​c. Go to Developer options - turn on Allow OEM Unlocking and Usb Debugging.​2. UNLOCK YOUR BOOTLOADER
a. Turn off your devices.​b. Press Volume up + power simultaneously to go to the bootloader​c. Use volume up to navigate and navigate to fastboot, select by pressing volume down​d. On your computer, go to the extracted file (the one i provided from mega.nz) and press shift + right click, the select open command window here.​e. Once on the command prompt type​fastboot devices​f. if your device appeared (denoted by serial number and device) type​fastboot oem unlock​g. on your device, follow the on screen instruction, press volume up to agree on unlocking bootloader​NOTE THIS WILL FORMAT YOUR DEVICE SO MAKE SURE YOU ENSURE YOU BACKED UP
h. Wait for it to return to fastboot mode.*Reboot. If you cant reboot it, reinsert battery and turn it on, it will now format your device. It will usually take time to boot so be patient.​i. Once booted go back to developer options again and enable oem unlock and usb debugging.​3. FLASHING TWRP RECOVERY
Done with unlocking? Lets proceed to flashing TWRP RECOVERY.​[WARNING AGAIN: DO THIS AT YOUR OWN RISK. DOUBLE CHECK THE FILES, DOUBLE CHECK THE*COMMANDS THAT YOU TYPE]
a. On your pc, again go to the extracted file, open the command prompt as instructed before and type this​ adb reboot bootloader​b. Your phone will restart to bootloader again, select fastboot again. Dont close the cmd.​c. On the command prompt type​fastboot flash recovery recovery.img​d. It will now flash the twrp. Ensure that the recovery is flashed correctly.​e. Reboot to recovery by holding volume up + down + power to shut it down without removing rom pc and by pressing vol up and power to boot to bootloader and selecting recovery.​f. IF YOU ARE NOW ON THE TWRP. CONGRATS. You have only one thing to do. Flash the root package.​4. FLASHING THE ROOT PACKAGE
a. Boot your phone and copy the root package to your internal storage.​b.Reboot to TWRP Recovery, once there select install and browse for UPDATE-SuperSU-v2.46.zip you just copied, swipe to install. Then viola! YOUR PHONE IS NOW ROOTED.​
AGAIN, I WILL NOT BE HELD LIABLE IF YOUR PHONE DIED, EXPLODED, ATE YOU OR COMMITTED SUICIDE. AGAIN AGAIN. ALL CREDITS GOES TO THE DEVS OF 4pda.ru especially Jemmini for the TWRP Recovery

if the adb driver dont work -http://adbdriver.com/downloads

keityrobins said:
if the adb driver dont work -http://adbdriver.com/downloads
Click to expand...
Click to collapse
thank you so much! since there's more than 3 threads about the same thing I don't think it's a bad idea to create a new one for this tutorial

pedrofortunato said:
thank you so much! since there's more than 3 threads about the same thing I don't think it's a bad idea to create a new one for this tutorial
Click to expand...
Click to collapse
then lets create a new one, but first let me know if there are mistakes on the tutorial.

[Root][RS988] Rooting RS988

Now that LG has released the bootloader unlock for the RS988 it can now be rooted.
------------------------------------------------------------------------Disclaimer---------------------------------------------------------------------------------------
This post is meant to be educational and I am not responsible for any lost data or damaged devices resulting from the following instructions
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----Instructions on Unlocking your bootloader can be found here---------
WARNING THIS WILL FORMAT YOUR DEVICE
https://forum.xda-developers.com/lg-g5/development/official-european-lg-g5-h850-bootloader-t3363040
The only difference is selecting RS988 when selecting your device
---------------------------------------------------------------------------------------
Requierments:
ADB
fastboot
An RS988 LGG5
The working (though not entirely tested!) TWRP image is found here https://build.nethunter.com/test-builds/twrp/lge/twrp-3.0.2-1-rs988.img (Thank you jeffsga88 for finding this link)
The Latest SuperSu Binary
Step 1:
Make sure your RS988 is fully updated, the rebooting into the bootloader is only unlocked in the most recent updates.
Step 2:
Enable Developer options and USB Debugging
Step 3:
Enter Command
Code:
adb reboot bootloder
Step 4:
Once in bootloader run
Code:
fastboot flash recovery [path to twrp image on your pc]
Step 5:
Turn off the device DO NOT let it boot back into android!!
If you do boot back into android, you will need to re-flash TWRP (Steps 1-4)
Step 6:
With your device unplugged, hold power and volume down, releasing the power button for a moment when you see the LG logo, then
re-pressing the button to enter recovery, on the following screen select yes both times
Step 7:
(The Following Text other than step numbers is written by and entirely created by jcadduono, and can be also found at his post at https://forum.xda-developers.com/lg-g5/development/recovery-team-win-recovery-project-lg-g5-t3363047)
At this point, you will see the TWRP splash and reach a screen asking you if you want to allow system modifications.
By swiping right, you will trigger dm-verity, and if you don't follow step 8 you will be unable to boot!
If you are going to root your device or follow the rest of these steps, then it is safe to swipe right and enable modifications.
Step 8:
Only if you want internal storage or data to work in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Go to [Reboot] -> [Recovery].
Step 9:
Please consider backing up your stock boot partition in TWRP before proceeding to the next steps!
Step 10:
If you want to be rooted with SuperSU:
Download the latest SuperSU stable by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
-or-
If you only want a bootable system partition or writable data in TWRP:
Download dm-verity and force encryption disabler.
Without exiting TWRP, transfer the no-verity-opt-encrypt zip to your device over MTP* and flash it using [Install] in TWRP.
Step 11:
Go to [Reboot] -> [System].
---------End of jcadduono post clip-------------
Now upon reboot, the phone may loop a few times and take up to 5 minutes to complete the process.
When you get into the device, run through setup as normal and you will have SuperSu installed and you will be rooted.
I can not verify Magisk Root Yet but will be attempting to do so soon.

You guys that have the rs988 you may want to ask one of the devs to add support for LOS and custom ROMs. But don't bug them either.
Maybe @King_lilrowrow could help if he has time, although I know he's been busy lately with other things. Hopefully someone will help you guys out. I have no idea how to, otherwise I would try and help. Nice you guys have rootr and twrp finally though.

I am using latest version: RS98810d
Step 4: flash recovery finished without error but cannot Power Off when press "Power" for 10 seconds so I unplug batterry then plugin again and press "Power+Volume down" but it cannot so I tried run command "fastboot boot twrp-3.0.2-1-rs988.img" after re-flash recovery but system shows:
=======================================
D:\adb>fastboot boot twrp-3.0.2-1-rs988.img
downloading 'boot.img'...
OKAY [ 0.554s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.585s
==========================================

AriesTruong said:
I am using latest version: RS98810d
Step 4: flash recovery finished without error but cannot Power Off when press "Power" for 10 seconds so I unplug batterry then plugin again and press "Power+Volume down" but it cannot so I tried run command "fastboot boot twrp-3.0.2-1-rs988.img" after re-flash recovery but system shows:
=======================================
D:\adb>fastboot boot twrp-3.0.2-1-rs988.img
downloading 'boot.img'...
OKAY [ 0.554s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.585s
==========================================
Click to expand...
Click to collapse
After flashing recovery, unplug USB cable and pull battery. Put battery back in, then press and hold volume down (hold volume down entire time) and press and hold the power button, when you see the lg logo, let go of power button for 1 second and then press and hold power button again until it reaches factory reset screen. One at factory reset screen select yes both times and you'll enter TWRP. When using the buttons remember to never let go of the volume down button only the power button for 1 second at lg logo.
You can also try after flashing it:
adb reboot recovery
Note: you must reflash TWRP if you allowed it to boot into os without flashing SuperSU or magisk.

AriesTruong said:
I am using latest version: RS98810d
Step 4: flash recovery finished without error but cannot Power Off when press "Power" for 10 seconds so I unplug batterry then plugin again and press "Power+Volume down" but it cannot so I tried run command "fastboot boot twrp-3.0.2-1-rs988.img" after re-flash recovery but system shows:
=======================================
D:\adb>fastboot boot twrp-3.0.2-1-rs988.img
downloading 'boot.img'...
OKAY [ 0.554s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.585s
==========================================
Click to expand...
Click to collapse
It is stated instead of doing that you turn off the phone and boot into the recovery with power+voldown

jeffsga88 said:
After flashing recovery, unplug USB cable and pull battery. Put battery back in, then press and hold volume down (hold volume down entire time) and press and hold the power button, when you see the lg logo, let go of power button for 1 second and then press and hold power button again until it reaches factory reset screen. One at factory reset screen select yes both times and you'll enter TWRP. When using the buttons remember to never let go of the volume down button only the power button for 1 second at lg logo.
You can also try after flashing it:
adb reboot recovery
Note: you must reflash TWRP if you allowed it to boot into os without flashing SuperSU or magisk.
Click to expand...
Click to collapse
I've followed your steps and I can root successful. Thanks alot

AriesTruong said:
I've followed your steps and I can root successful. Thanks alot
Click to expand...
Click to collapse
No problem! Glad we finally have it on RS988

I've held off on unlocking the bootloader and rooting, since it seems there currently are no ROMs available for the RS988 to flash. Basically you just end up with rooted stock?

FAUguy said:
I've held off on unlocking the bootloader and rooting, since it seems there currently are no ROMs available for the RS988 to flash. Basically you just end up with rooted stock?
Click to expand...
Click to collapse
Yes, currently all you can do is install TWRP and root stock. You can also install some audio mods like viper, but no custom ROMs yet for this version of the device.

Is there a touch TWRP recovery available? Granted I'm not sure if I will be able to flash it, since my power button is broken.

maRioHD said:
Is there a touch TWRP recovery available? Granted I'm not sure if I will be able to flash it, since my power button is broken.
Click to expand...
Click to collapse
Yes it's touch TWRP, can't even remember last time I saw a non-touch based one, been at least 3 years or so. Anyways it's located in the op. As far as flashing it, I believe you can do it without the power button. The issue will be rebooting to recovery after flashing it to flash SuperSU or magisk (if you don't do that or at least get into TWRP before first bit after flashing and delete the recovery from boot.p file, TWRP will be overwritten by default recovery and you have to flash again). While in fastboot mode, after flashing you could try and use:
Code:
adb reboot recovery
Not sure if that will get work or not while in fastboot mode, but something to try since your power button is broke.

Is it work on h860?
Sent from my LG-H860 using Tapatalk

Thank you for the advice. I'll try to give it a go tomorrow and report my success. And ya it's been a while since i have been able to do anything to my phone.

memi_pt said:
Is it work on h860?
Sent from my LG-H860 using Tapatalk
Click to expand...
Click to collapse
No. This is for RS988 only.

maRioHD said:
Is there a touch TWRP recovery available? Granted I'm not sure if I will be able to flash it, since my power button is broken.
Click to expand...
Click to collapse
Yes the twrp in the article is touch

Is the latest build RS98811d? Please confirm..
cheers!

wasabitobiko said:
Is the latest build RS98811d? Please confirm..
cheers!
Click to expand...
Click to collapse
You can always check using LG bridge and use update feature. If just wanting to know because your wanting to root and get TWRP, try and follow the guide. If you're not on latest version you'll know because you won't be able to unlock the bootloader using fastboot. If you can unlock your bootloader, you're good to go.
Here's the link and info for LG bridge and using it to check for updates:
http://www.lg.com/us/support-mobile/lg-LGRS988

jeffsga88 said:
Yes it's touch TWRP, can't even remember last time I saw a non-touch based one, been at least 3 years or so. Anyways it's located in the op. As far as flashing it, I believe you can do it without the power button. The issue will be rebooting to recovery after flashing it to flash SuperSU or magisk (if you don't do that or at least get into TWRP before first bit after flashing and delete the recovery from boot.p file, TWRP will be overwritten by default recovery and you have to flash again). While in fastboot mode, after flashing you could try and use:
Not sure if that will get work or not while in fastboot mode, but something to try since your power button is broke.
Click to expand...
Click to collapse
Adb reboot recovery sadly does not work, i encountered this myself , a replacement power button is quite cheap though

xaviex said:
Adb reboot recovery sadly does not work, i encountered this myself , a replacement power button is quite cheap though
Click to expand...
Click to collapse
Yeah didn't think it would but was worth trying Yeah, looks like a $10-15 fix

Thanks for the reply..
Gonna wait until there's some development happening for this device..
Cheers!
jeffsga88 said:
You can always check using LG bridge and use update feature. If just wanting to know because your wanting to root and get TWRP, try and follow the guide. If you're not on latest version you'll know because you won't be able to unlock the bootloader using fastboot. If you can unlock your bootloader, you're good to go.
Here's the link and info for LG bridge and using it to check for updates:
http://www.lg.com/us/support-mobile/lg-LGRS988
Click to expand...
Click to collapse

TWRP for Intex Aqua 5.5 VR

Note: Unlocking bootloader will completely wipe your device’s data(Everything like music,
photos, videos & apps).So we highly recommend taking backup of your important data. So take
a backup of your apps and data
IMPORTANT & PREREQUIREMENTS
*Make sure there is at least 60% battery left on your smartphone before begin started
this process
• Install USB Drivers on your computer. ( Drivers are Included on The Zip)
• Enable developer option and usb debugging
NEXT STEP
• Connect your android to your PC with USB cable
• Now go to ADB folder and Open the command window there(Right click on the
empty space inside the folder then select “Open command window here” option to
launch a cmd window)
• Now reboot into the bootloader by issuing the following commands. (Make sure
your device is detected by your PC)
adb reboot bootloader
• Now Check fastboot connectivity by giving the command below.If your device is
connect properly then it should return device code.
fastboot devies
• Once in the bootloader, issue the following fastboot command to unlock the
bootloader. (This will unlock your phone and wipe all data of your device)
fastboot oem unlock
There will be a Warning, Press the Volume up Key to Continue.
Then Restart Your Phone, Setup it, then again enable usb debugging .
RECOVERY INSTALL STEP
1. Open the adb folder ( Recovery Image is already Loaded There)
2. Then open a CMD window inside that folder. To do that, Shift + Right click on any empty
white space inside the folder and then select Open command window here.
3. Connect your Android device to the PC. Type the following into the command window to boot
your device into bootloader/fastboot mode:
adb reboot bootloader
4. Once your device boots into bootloader mode, type this into the command line.
fastboot flash recovery recovery.img
5. Once TWRP is successfully flashed on your device, type this final command to reboot your
device.
fastboot reboot
HOW TO ROOT INTEX AQUA 5.5 VR
Download the Super Su .zip From Downloads Tab
Then Go to TWRP Recovery
Touch on Install
Touch on Supersu.zip
It will install & Patch Boot.img on the fly
XDA:DevDB Information
TWRP for Intex Aqua 5.5 VR, Tool/Utility for all devices (see above for details)
Contributors
Rajarshi2
Version Information
Status: Stable
Created 2017-09-04
Last Updated 2017-09-04

can any one help me to port or create a twrp recovery for mtk device

vicky karthi said:
can any one help me to port or create a twrp recovery for mtk device
Click to expand...
Click to collapse
yes i can , tell me your device name

Lava iris 402 and i need to install twrp recovery in infocus m350 which was in lock bootloader

Ok give me sometime i will help you

Make my phone root adaptable...
Intex aqua s3 . android 7.0... Plz

Rajarshi2 said:
yes i can , tell me your device name
Click to expand...
Click to collapse
Intex aqua 5.5 vr plus

doesn't works!!
In fastboot mode
Press Volume Up key to unlock
Press Volume Down key to abort.
volume down key working perfectly and aborting the mission but VOLUME UP KEY DOESN'T WORKS!
In developer mode OEM UNLOCK is already turned on!
In RECOVERY MODE IT SAYS NO COMMAND.

prit19 said:
In fastboot mode
Press Volume Up key to unlock
Press Volume Down key to abort.
volume down key working perfectly and aborting the mission but VOLUME UP KEY DOESN'T WORKS!
In developer mode OEM UNLOCK is already turned on!
In RECOVERY MODE IT SAYS NO COMMAND.
Click to expand...
Click to collapse
Hey Mate just keep pressing volume up button it will work ..It worked in mine.. BTW it I helped then press the thanks button.

smarty1 said:
Hey Mate just keep pressing volume up button it will work ..It worked in mine.. BTW it I helped then press the thanks button.
Click to expand...
Click to collapse
are you serious? because i tried and nothing happens i pressed VOL UP for 100 times nothing happens pressed VOL DWN 1 time.. it got cancled.

prit19 said:
are you serious? because i tried and nothing happens i pressed VOL UP for 100 times nothing happens pressed VOL DWN 1 time.. it got cancled.
Click to expand...
Click to collapse
While you press volume + hold it ffor some seconds it will work.

Root Sony Xperia XA [F3111, F3113, F3115][N][33.3.A.1.97] or repair bootloop

This guide only works for the Single SIM model!
Only for: [F3111/F3113/F3115][N][33.3.A.1.97]
Requirements:
http://www.flashtool.net/downloads.php
https://mega.nz/#!Btg10D6L!-WX6Aa0Z6qpVSUcAiaF2W8fYl2UlM9fGDB0EVpkA4Tc
https://drive.google.com/file/d/17NBChXsL15GyQaqaJYUwu0ZijBMRzwMl/view
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
For Magisk click Donload 'latest stable'
https://mega.nz/#!Y0lQnTZI!WG5F2Cf_JpxqsZx59ZOVBydkQMy4Gb25kmWYl1HkzQI
Instructions:
Copy the Magisk and DRM zips to an SD card and put it in you phone or copy the files directly to your phones internal storage
Rename the recovery file to 'recovery.img'
Then copy both the boot.img and the recovery.img to C:\Flashtool\x10flasher_lib
Check if bootloader can be unlocked:
1. Open the phone application on your device and type *#*#7378423#*#*
2. Tap service info then configuration then rooting status
3. If bootloader unlock allowed says yes then continue with this guide if it says no this guide cannot help you
Unlock bootloader:
1. Go to your phones settings then click about phone and tap build number around 7 to 10 times until it tells you you are now a developer
2. Then go to developer options and turn them on
3. Next turn on OEM unlocking
4. Next turn on USB debugging and click ok
5. Next open flashtool and click on the BLU button
6. Then turn off your phone and plug it into the computer whilst holding volume- until the green LED appears
7. Then click on unlock this will unlock your bootloader and let us continue
Installing custom recovery (TWRP) and Rooting(Magisk):
1. Connect the phone to your PC whilst holding Volume+ and keep holding it until the blue light turns on.
2. Open the command window in C:\Flashtool\x10flasher_lib. Then flash boot and recovery with the commands "fastboot flash boot boot.img" and "fastboot flash recovery recovery.img".
3. Disconnect the USB cable and press Volume- and Power button until you hear a vibration. You are now in the recovery. When it prompts for a password, press Cancel and Swipe to allow modifications.
4. Then go to Wipe and press Format Data. You must do this as if you don't, a boot loop will occur. Then go back and go to Install and select your Magisk file and swipe to install it. Then reboot to system.
5. It will take a couple of minutes for the phone to boot up (For me it took 5mins). Once it boots up, setup Android and be sure to skip logging into google or myXperia as it doesn't work without the DRM fix.
6. Turn off your phone and press Volume- and Power button until you hear a vibration. Swipe to allow modifications. Then go to Install, select your DRM fix file and swipe to install it and wait for the installation to complete. Then reboot to system.
7. That's it. Your phone is now rooted and the DRM functions now work. You should have the Magisk app on your app list now.
Bootloop Repair:
1. Open flashtool and click on the BLU button
2. Then plug your phone into the computer whilst holding volume- until the green LED appears
3. Then click on relock this will relock your bootloader and let us continue
4. Then download and install xperia companion and open the software
5. Then click software repair and click on 'My device cannot be detected or started, or is a SmartWatch 3' and click next
6. Then select 'Xperia phone or tablet' and click next
7. Check the check box for your google details and click next then let it initialise and follow the steps on screen
Thanks for reading :good: and thank me if i helped

How, will you know that the DRM keys are active/working?
At My XA (F3111) my cameras are not working at all, and if i do your tutorial it will fix my cameras?
Thanks In Advance

[HOWTO]/[ROM] [UNOFFCIAL] How to Flash Lineage OS 19.0

Here is a quick how-to guide to flash LineageOS 19.0 to the A51​
Disclaimer: I am not the maintainer of any of the files I link to here. I just wanted to share my experience to make the process of Flashing los19 to the a51 easier for others.
Prerequisites:
1. Unlocked Bootloader
This step is crucial. You need to unlock the bootloader of the A51 before trying any of this. If not, you are likely to brick your device.​1.1. Unlock developer mode by standard procedure: Settings > Info > Tab 7 times on build number​1.2. Enable USB debugging in Developer Options​1.3. Enable OEM unlocking in Developer Options -> To see OEM unlock option I needed to connect to my WIFI, then set the phone date manually to March 7th 2019. Only then the OEM unlock option became visible in Developer Options. Yes, this is super dumb and inconvenient...​1.4 After triggering OEM unlock option shutdown your phone.​1.5 Enter Download mode by: Pressing Volume+ and Volume - while at the same time plugging in the USB cable that is already in your PC.​1.6. To finally unlock bootloader, you will see a green screen on which you need to press Vol + for some time. THIS WILL VOID YOUR WARRANTY. It will also erase all data on your phone!​1.7 After reboot repeat steps 1.1. - 1.5. again. This time you can actually enter download mode by pressing Vol + shortly on the green screen.​
2. Flash Twrp
You can now flash TWRP via Odin. The TWRP img I used is here: https://www.mediafire.com/file/0h14t0263oujhna/TWRP-11-3.6.1-a51-20220321-1406-hotfix.tar/file. I flashed it as AP. Make sure to uncheck Auto reboot before flashing.​When flashing is complete hold Vol - and Power until reboot.​Immediately when rebooting hold Vol + and Power until Samsung logo appears, then let Power go but hold Vol + to enter TWRP.​
3. Actual Flashing:
3.1. Necessary Files:​Make sure to load all files necessary to your SD before flashing:​ChonDoe_Flasher, Disable_Dm_Verity, Multidisabler, LOS-Imagefile, Magisk(optional)​​As for the LOS Image I used this file here, which already includes gapps:​lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img​​If you don't want gapps pick an image that says "BvS" instead of "bgs"​​3.2. You need to move your LOS-Image to the same folder as ChonDoe_Flasher and rename the file to "system.img"​
3.3 Flashing Sequence:
In TWRP Follow this sequence:
3.3.1. Wipe data, dalvik, cache​3.3.2. flash disable_dm_verity​3.3.3. flash multidisabler​3.3.4. Wipe internal storage (Backup might be advisable, if you didn't format data anyways)​3.3.5. reboot recovery​3.3.6. flash chondone with lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img in the same folder renamed to system.mg​3.3.7. Wipe data​3.3.8. Reboot​
That should be it. First startup takes some time, your phone should boot to LOS 19.
4. Anger Management
If you softbrick your device you can try to go back to stock rom by accessing download mode and flashing it via Odin. Will take some fiddling around with the button combinations.
If you hardbrick your device don't hold me responsible and good luck to you!
Thanks to
Kyau Sana, Vadim Kupriyanov, Knoyan GTR-X and Sara Lins and other, from the telegram-group, who helped me figure out the process.

Reserved 1

Reserved 2

Lineage 19 flash worked but after flashing my TWRP recovery bootloops (flashing twrp logo).
TWRP that loops is twrp-a51-3.5.0_10-1_ianmacd.
Do you have a working TWRP for this version of Lineage ?
Tried TWRP v3.6.1 A51 tree but it doesn't work and boots into download mode with "DT Entry not found / DT Load Failed / VB Meta sign errors"

exault said:
Lineage 19 flash worked but after flashing my TWRP recovery bootloops (flashing twrp logo).
TWRP that loops is twrp-a51-3.5.0_10-1_ianmacd.
Do you have a working TWRP for this version of Lineage ?
Tried TWRP v3.6.1 A51 tree but it doesn't work and boots into download mode with "DT Entry not found / DT Load Failed / VB Meta sign errors"
Click to expand...
Click to collapse
I added a download link to the TWRP img I used to my initial post. Let me know if it works.
cheers

DerTopher said:
I added a download link to the TWRP img I used to my initial post. Let me know if it works.
cheers
Click to expand...
Click to collapse
Nope TWRP does not work. When using the one you linked (as all other 3.6.1 ones) it just jumps back to download mode with DT Entry not found & VBMeta not signed errors.

ALL sensors ok ?
Fingerprint ok ? In this ROM

exault said:
Nope TWRP does not work. When using the one you linked (as all other 3.6.1 ones) it just jumps back to download mode with DT Entry not found & VBMeta not signed errors.
Click to expand...
Click to collapse
Sorry to hear mate. Unfortunately I cannot hell you solve this issue. There is a telegram channel for custom roms on the A51 with many motivated people. One of them might have the answer you need!
See: https://t.me/samsunga51
If you find it, please post it, so others can profit from it. With your agreement I would also like to add info about the solution - should you find it - to my initial post.
hacker812c said:
ALL sensors ok ?
Fingerprint ok ? In this ROM
Click to expand...
Click to collapse
Don't know about fingerprint as I do not want to provide biometric data to my phone. Maybe someone else using the ROM can answer this; Or you, if you decide to flash it post your results.
Apart from that I have not had any problems with the ROM apart from the following:
-The resulotion of the native lineage camera app is not satisfactory. When I find an app that works better, I'll let you know.
- Restarting the phone after empty battery requires a soft reset sometimes (power+vol -)
-> A solution to this problem might be given in this post. Will try it later.

Thank you, @DerTopher , but unfortunately the link to your LOS file does not work any more. How do I get the file now?

THIS GUIDE ONLY WORKS ON ANDROID 12!!!
sunnyy15 said:
I have concluded all my experiments, and now I can confirm that the "twrp-a51-3.5.0_10-1_ianmacd.tar" on this website only works for Android 10 as instructed by Admin. This does not for Android 11. For Android 11 you have to flash a different file called "Twrp+vbmeta_A11.tar". Details are given in the following link: https://forum.xda-developers.com/t/...-sm-a515f-one-ui-3-0-dub1-android-11.4231543/
Click to expand...
Click to collapse
@DerTopher , please change your OP to specify that this guide ONLY works for Android 12. I just bootlooped my device when trying this on Android 10 stock firmware
See this excelent post for more info: https://forum.xda-developers.com/t/...-ui-2-5-ctj1-android-10.4213443/post-84750027

Anyone knows how to remove the native SU, so that magisk doesn't complain about "abnormal state" su file ?

when i flash something in twrp i have an error failed to mount '/odm4 no such file or directory Can some help me please i am stuck here

DerTopher said:
Here is a quick how-to guide to flash LineageOS 19.0 to the A51​
Disclaimer: I am not the maintainer of any of the files I link to here. I just wanted to share my experience to make the process of Flashing los19 to the a51 easier for others.
Prerequisites:
1. Unlocked Bootloader
This step is crucial. You need to unlock the bootloader of the A51 before trying any of this. If not, you are likely to brick your device.​1.1. Unlock developer mode by standard procedure: Settings > Info > Tab 7 times on build number​1.2. Enable USB debugging in Developer Options​1.3. Enable OEM unlocking in Developer Options -> To see OEM unlock option I needed to connect to my WIFI, then set the phone date manually to March 7th 2019. Only then the OEM unlock option became visible in Developer Options. Yes, this is super dumb and inconvenient...​1.4 After triggering OEM unlock option shutdown your phone.​1.5 Enter Download mode by: Pressing Volume+ and Volume - while at the same time plugging in the USB cable that is already in your PC.​1.6. To finally unlock bootloader, you will see a green screen on which you need to press Vol + for some time. THIS WILL VOID YOUR WARRANTY. It will also erase all data on your phone!​1.7 After reboot repeat steps 1.1. - 1.5. again. This time you can actually enter download mode by pressing Vol + shortly on the green screen.​
2. Flash Twrp
You can now flash TWRP via Odin. The TWRP img I used is here: https://www.mediafire.com/file/0h14t0263oujhna/TWRP-11-3.6.1-a51-20220321-1406-hotfix.tar/file. I flashed it as AP. Make sure to uncheck Auto reboot before flashing.​When flashing is complete hold Vol - and Power until reboot.​Immediately when rebooting hold Vol + and Power until Samsung logo appears, then let Power go but hold Vol + to enter TWRP.​
3. Actual Flashing:
3.1. Necessary Files:​Make sure to load all files necessary to your SD before flashing:​ChonDoe_Flasher, Disable_Dm_Verity, Multidisabler, LOS-Imagefile, Magisk(optional)​​As for the LOS Image I used this file here, which already includes gapps:​lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img​​If you don't want gapps pick an image that says "BvS" instead of "bgs"​​3.2. You need to move your LOS-Image to the same folder as ChonDoe_Flasher and rename the file to "system.img"​
3.3 Flashing Sequence:
In TWRP Follow this sequence:
3.3.1. Wipe data, dalvik, cache​3.3.2. flash disable_dm_verity​3.3.3. flash multidisabler​3.3.4. Wipe internal storage (Backup might be advisable, if you didn't format data anyways)​3.3.5. reboot recovery​3.3.6. flash chondone with lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img in the same folder renamed to system.mg​3.3.7. Wipe data​3.3.8. Reboot​
That should be it. First startup takes some time, your phone should boot to LOS 19.
4. Anger Management
If you softbrick your device you can try to go back to stock rom by accessing download mode and flashing it via Odin. Will take some fiddling around with the button combinations.
If you hardbrick your device don't hold me responsible and good luck to you!
Thanks to
Kyau Sana, Vadim Kupriyanov, Knoyan GTR-X and Sara Lins and other, from the telegram-group, who helped me figure out the process.
Click to expand...
Click to collapse
Hello friends, how are you? Could someone post the ROM link again, the link is broken.
lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS

dmudo said:
Hello friends, how are you? Could someone post the ROM link again, the link is broken.
lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS
Click to expand...
Click to collapse
Andy Yan's personal builds // GSI
Download Andy Yan's personal builds // GSI for free. None
sourceforge.net

i have a question
in step 3.3.6. flash chondone with lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img in the same folder renamed to system.mg
i try to flash chondoe and i tried to add de system.img, and it prompt me to what partition
This are the partitions that apears to me
- Boot
- DTBO Image
- Optics Image
- Prism Image
- Recovery
- Param
- VBmeta Samsung
- VBMeta Samsung
- Super (system vendor product odm)
Does anyone know where ?

DerTopher said:
Here is a quick how-to guide to flash LineageOS 19.0 to the A51​
Disclaimer: I am not the maintainer of any of the files I link to here. I just wanted to share my experience to make the process of Flashing los19 to the a51 easier for others.
Prerequisites:
1. Unlocked Bootloader
This step is crucial. You need to unlock the bootloader of the A51 before trying any of this. If not, you are likely to brick your device.​1.1. Unlock developer mode by standard procedure: Settings > Info > Tab 7 times on build number​1.2. Enable USB debugging in Developer Options​1.3. Enable OEM unlocking in Developer Options -> To see OEM unlock option I needed to connect to my WIFI, then set the phone date manually to March 7th 2019. Only then the OEM unlock option became visible in Developer Options. Yes, this is super dumb and inconvenient...​1.4 After triggering OEM unlock option shutdown your phone.​1.5 Enter Download mode by: Pressing Volume+ and Volume - while at the same time plugging in the USB cable that is already in your PC.​1.6. To finally unlock bootloader, you will see a green screen on which you need to press Vol + for some time. THIS WILL VOID YOUR WARRANTY. It will also erase all data on your phone!​1.7 After reboot repeat steps 1.1. - 1.5. again. This time you can actually enter download mode by pressing Vol + shortly on the green screen.​
2. Flash Twrp
You can now flash TWRP via Odin. The TWRP img I used is here: https://www.mediafire.com/file/0h14t0263oujhna/TWRP-11-3.6.1-a51-20220321-1406-hotfix.tar/file. I flashed it as AP. Make sure to uncheck Auto reboot before flashing.​When flashing is complete hold Vol - and Power until reboot.​Immediately when rebooting hold Vol + and Power until Samsung logo appears, then let Power go but hold Vol + to enter TWRP.​
3. Actual Flashing:
3.1. Necessary Files:​Make sure to load all files necessary to your SD before flashing:​ChonDoe_Flasher, Disable_Dm_Verity, Multidisabler, LOS-Imagefile, Magisk(optional)​​As for the LOS Image I used this file here, which already includes gapps:​lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img​​If you don't want gapps pick an image that says "BvS" instead of "bgs"​​3.2. You need to move your LOS-Image to the same folder as ChonDoe_Flasher and rename the file to "system.img"​
3.3 Flashing Sequence:
In TWRP Follow this sequence:
3.3.1. Wipe data, dalvik, cache​3.3.2. flash disable_dm_verity​3.3.3. flash multidisabler​3.3.4. Wipe internal storage (Backup might be advisable, if you didn't format data anyways)​3.3.5. reboot recovery​3.3.6. flash chondone with lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img in the same folder renamed to system.mg​3.3.7. Wipe data​3.3.8. Reboot​
That should be it. First startup takes some time, your phone should boot to LOS 19.
4. Anger Management
If you softbrick your device you can try to go back to stock rom by accessing download mode and flashing it via Odin. Will take some fiddling around with the button combinations.
If you hardbrick your device don't hold me responsible and good luck to you!
Thanks to
Kyau Sana, Vadim Kupriyanov, Knoyan GTR-X and Sara Lins and other, from the telegram-group, who helped me figure out the process.
Click to expand...
Click to collapse
3.3.7 format data or wipe?