I have a phone Huawei Y3 II and one thing that is broken in this phone is the auto data transfer after restart. When i turn off the data transfer it will be auto turn on after restart ... Is there a way to fix it ? Use fake VPN or i dont know...
Ok i have deleted all apn settings and it seems to work like a charm
Sir,i have a huaweil y360-u82 mtk65 72
And i messed up my recovery partition with rashr or flashify by selecting "skip image size checking"
Now everytime my phone Reboot into recovery i have a black screen "nor" can i re-install the system through local firmware option because the recovery is abscent
If i want to do that with the pc flash tools,there have to be someone with the same system (the last one,you can find on the huawei website for y360 u-82) that have done a backup then the partitions will be Recognized.because The original system update zip don't have the partition aligned for the flash tools identification.
Please someone help mee, wether by:
1.making a full backup of his system(via one of the mtk flash Tool)
2.making a backup of his Recovery(but with the last system update for the model)
Related
How to restore the Stock ROM:
For Grand X ProOK, today I'll be showing you how to restore the Grand X Pro back to Stock, just as it was before you flashed the custom ROM...
You will need:
A PC Running Windows 7 (ONLY WIN 7 WORKS FOR NOW)
The Grand X Pro
A USB Android Cable
My FlashTool
ZTE VCOM Preloader Drivers MT6577
So , first get the full flashtool from here: ApeelMe's Blogspot - ZTE Grand X Pro FlashTool
Also install the Preloader drivers if you didn't do so...
Plug in the Grand X Pro and then turn it off...
It should (on the PC) install some drivers and fail , don't worry...
Open flashtool and select the NandUtil file and the Scatter file (nandutil.bin and mt6577_scatter.txt , their names are like that)
In the menu where you can select ANDROID , RECOVERY , BOOT , MBR, DSP , Preloader , etc DON'T Touch anything as it will wipe that partition and you may hard-brick your device..
Click "Download" in flashtool, wait till the green circle...
After the green circle appears , close flashtool and disconnect the phone.
Now turn it on, good ol' stock ROM...
Hope this works for you as it did work for me...
TeamMaverick
it didn't work for me, it completes the download and evrything but it still just stands on zte sign an that is it, can you help?
trying to use but i get a nandutil.bin file is not a valid da format. Is it corrupted?
Anyhowse. i went ahead and flshed with all in one. im now with cyanogenmod and cwm which is the opposite of what i needed. How can I return to stock rom and stock recovery? basically i need to send it back to shop because of faulty screen.
Resolved. Followed guide with link here
http://apeelme.blogspot.no/2013/08/zte-blade-super-gyari-allapot.html?m=1
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
majmun123 said:
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
Click to expand...
Click to collapse
Didn't have any problems followed these steps:
1. run Flash_tool.exe from desktopfolder (maybe try run as admin if a problem)
2. select File-open scatter loading file
3. select MT6577_Android_scatter_emmc.txt from restore to stock folder.
the ebr1 etc should be automatically filled in with file pathway
4.click download button
5. plug in switched off telephone (if drivers installed properly should just run)
6. wait until green circle appears. hey presto! switch on telephone.
nothing i hav done all that, an the problem is when it is all finished, i get errors such as can't mount data, it doesn find anything, i don't know what to do else, if you want i can post pictures when i enter recovery mode
repair grand x pro
Hi, this is no working for me. Just have CWm after finished.
I tried update tool software too, but can't recognize phone, red x stay at chacking and installing drivers.
Someone help?
Hello everyone.
I rooted my phone (os was marshmallow) with android lollipop procedure, so i soft bricked the phone.
I flashed with fastboot various versions of huawei p8 lite firmware, all of these were 5.0.1.
When I managed to unbrick my phone I found out that it can't read the sim, so I looked in settings and IMEI and BASEBAND were disappeared.
Probably direct downgrade from marshmallow to lollipop caused this.
By the way, I managed to solve all my problems.
I will write what I've done here. I hope will be helpful. To start: my model is ALE-L21 (Single Sim).
- Download B041c (if you search in google you will find various results, all taking to the same site). I'll explain this better after *
- Flash with fastboot B041c
- Download B133 (this is very easy to find, but if you have problems search in a site called carbontesla)
- Unpack B133 dload folder (you will find custom folder too, don't worry about it) and put dload folder in the root of your sdcard
- Go to Settings -> Updater -> Local Update and start B133 update. Phone will boot. The upgrade process should be done with phone chargend and unplugged from PC.
- At some points update could appear stucked (for me was at 15% and 85%) but be hopeful and it will continue (let be patient).
- Phone will boot and your sim after 4-5 seconds will work again!
* B041c is hard to find. At this time only one site have it. I can't link you this site, because the downloader you get from this site installs adware on your pc while it download B041c. I have had to solve my problem so I proceded at my own risk.
Updater will notify you about the update to B183. It doesn't worked to me! If you want to update your phone you can install firmware B171 and install it as update (in dload folder)
UPDATE TO MARSHMALLOW
- If you want to update your phone to marshmallow you have to download other two firmwares (B171 and the MM you want. I used B551)
- Put the dload folder of B171 in your sd card, turn off your phone and force flash (VOLUP + VOLDOWN + POWER buttons). It may appear stucked at 19% and 85%. Don't worry, be patient!
- When phone boot is completed, put dload folder of your MM firmware in your sdcard, turn off the phone and force upgrade (VOLUP + VOLDOWN + POWER buttons). It will take 15-20 minutes.
- When installation is completed and phone boots, turn it off again, enter in recovery mode (VOL UP + POWER button) and clear data and cache.
- Now you have a clean install of MM! However, some applications may be old (play store). If you have connected our phone to a network, play store will update automatically
SOLVE BALONG BUG
You can find easliy the solution in the forum. But to be a complete guide and make your life a lot way easier here is the solution.
Simply put UPDATE.APP of custom folder that you can find in some firmware (I used B049 custom folder) in your sd card and then update from settings or from force update. Is a 20KB file so it will be very fast to install
Hi guys!
I have an issue here with the Huawei P8. I wanted to go back to stock from ARROW ROM, so
-I used Huawei Extractor to get the stock recovery and flashed it via fastboot adb
-Updated my phone with the 3 button method and put the DLOAD folder into my SD card
-I used B394 to get the recovery img and to update as well (it was ~1,6Gb)
The update started and everything worked fine, the phone said everything is fine but my phone stuck in bootloop. I mean it doesn't restart or anything but all I can see is the Huawei logo.
What should I do? Any tips how to fix this?
First try getting into Recovery mode & doing a factory reset & cache wipe.
If that doesn't work, try with a stock rom that's one prior to what you had before installing Arrow - like in this thread & follow the steps there (i.e. you first need to flash boot, system & recovery .img files extracted from the prior rom): [GUIDE] How to unbrick HUAWEI P8 when failed to update and ends in bootloop
If you cannot find where to download the prior stock rom, ask for help - someone may be able to provide a link that works. Tell us your phone's full, original model number (GRA-????), the region rom you need (e.g. C432 would be European) & the version B???.
Hi.
CAN-L11
Unlocked bootloader, rooted etc.
When i want back to factory settings, twrp show me information about encrypted data. So i vipe data (found this solution in google...) and when phone boot up there is error about unsuccesful decrypt data or something like that.
At next im boot into fastboot and flash by fastboot firmware boot, recovery,system and cust from update.app.
At now when i turn off phone i see only information "my phone is untrusted.... device is booting now" and nothing happens.
When i try to recovery firmware from sdcard (dload folder) it stuck at 5%.
What can i do ? I read many threads about that and there is many possible solutions but i dont wanna to make a bigger mess with my phone.
Sorry about my english
Unplug USB cable. Try another update.app?
DC-unlocker is a good solution bro, i had serious problem and i fixed and i get official nougat android,i have nova dual sim...
I accidentally wipe Dalvik/Art cache、System、Data and Cache through twrp recently.
Now, my phone shows no OS, so can not boot in system.
I can enter TWRP and fastboot and e-recovery, but I have tried to install UPDATE.zip, it always show error. I can install update_full_LON-L29_hw_spcseas.zip sucessfully though.
Is there anyway to fix my brick mate9 PRO>< PLZ help me
Another problem is that I cant install zip files through install(my phone doesnt have a sd card), the directory always shows encrypted text and wouldnt let me choose. I have tried few recoveries, including TWRP_3.2.1-0_OREO, Rayglobe_Recovery, and twrp-3.1.1-0-hi3660. Some of them cant getin recovery after flashing them, the rest shows encrypted text. Can anyone please save my brick phone?
TWRP doesn't work correctly, since the phone uses encryption.
I'd try downloading the Huawei Multi-tool, then download a full update through it, that fits your phone model. Then (assuming you have access to fastboot) flash the downloaded update through the Multi-tool program.
Basically this:
Huawei Multi-tool > find correct firmware with Huawei firmware finder (it's included in the program) > extract the different parts of the firmware needed, which is displayed on the the unbricking tap, and follow the rest of the instructions displayed there.
genehung2003 said:
I accidentally wipe Dalvik/Art cache、System、Data and Cache through twrp recently.
Now, my phone shows no OS, so can not boot in system.
I can enter TWRP and fastboot and e-recovery, but I have tried to install UPDATE.zip, it always show error. I can install update_full_LON-L29_hw_spcseas.zip sucessfully though.
Is there anyway to fix my brick mate9 PRO>< PLZ help me
Another problem is that I cant install zip files through install(my phone doesnt have a sd card), the directory always shows encrypted text and wouldnt let me choose. I have tried few recoveries, including TWRP_3.2.1-0_OREO, Rayglobe_Recovery, and twrp-3.1.1-0-hi3660. Some of them cant getin recovery after flashing them, the rest shows encrypted text. Can anyone please save my brick phone?
Click to expand...
Click to collapse
You can unbrick your device using firmware finder and eRecovery like I what I sayed in this post : http://forum.xda-developers.com/mate-9-pro/help/lon-l29-install-opengapps-frplock-t3892529/post78767873
Tuto :
1. Install Multi-tool 8
2. Choose the official firmware you want
3. Copy the Changelog.xml url by Right-clicking on it.
4. Activate the DNS with this firmware
5. Activate the Wifi sharing on your Windows 10 PC or laptop (By clicking on the Wifi icon at buttom-right of the screen and click on mobile hotspot)
6. Change the DNS of your PC in the Adaptater Option
7. Enter in E-Recovery and connect your phone on the Wifi of your PC
8. Download and Install it on your huawei Mate 9 Pro with this eRecovery