good day to all. i keep receiving these error while connecting my watch to the flash tool. please kindly guide me on how to solve this problem. am i doing anything wrong. i followed all the instruction and using the files and flash tool.
__________________________________________________ _____________
FLASHTOOL ERROR : S DL MAUI FLASH ID NOT MATCHED WITH TARGET (5095)
(MAUI) SingleMemory the flash id of MAUI BIN is not match to target phone flash!
please check MAUI load is build correctly and fits this target.
HINTL:
_________________________________________________________________
Related
Installation Method: [Using SP Flash Tool]
Bootloader Must Be Unlock
See Instructions : Click Here
_____________________________________________________________________________________________________
FLASH FILE : Download
SP FLASH TOOL : Download
Drivers : Download
HITS THANKS BUTTON IF I HELPED :good:
Have you tested it?
Tested by anyone?
hi how are you
I have a problem with the phone ls980 . It updated the wrong way and I have a fastboot problem
But I fixed it with srktool . Process and has successfully
now the download mode work good but When I have flash this phone withe tot file and dll file ( ls980 )
the flash tool show me error 'laf read gpt' on 6%
I have to use everything but the same thing happened
- Using a new file dll LGUP_8974 but no think hapend
- using a new tot file but same probleme
- When in use fastboot mode and flash or erase any partition like lif.recovery.... the cmd show me error message ' remote: failed to erase partition'
I've used all the solutions of the sites but same problem ' laf read gpt failed ' in flashtool
Please help before I will break this phone plz plz plz
sorry for bad english
Plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Very long story to kinda short explanation below
It all started when I tried to root my A37FW and a few steps were not going according to plan.
OppoTools was not properly unlocking bootloader, TWRP recovery not being properly installed even after bootunlock fix.
After all that, I soft-bricked the device again. I grew tired, so I unpacked the stock rom to re-flash and go back to before I started messing around with it. I unpacked it at the wrong folder so I was going to move it. Unfortunately, the TWRP recover.img was copied along with the unpacked stock rom overwriting the original recover.img. Note that during this time I haven't noticed it yet, not until it was too late, when I looked at the total file size and it was off by 10MB. But I was already flashing it.
Anyway, I stopped it. But was too late couldn't re-flash the correct set of files to be flashed. I checked how I could fix it, and found about the QFIL. My only problem now is, with the stock rom that I downloaded it has all the files it needs, plus some extra options I can pick.
- prog_emmc_firehose_xxxxx.mbn
- rawprogram0_BLANK.xml
- rawprogram0_MSM_xxxxx.xml
- rawprogram2.xml
- patch0.xml
I've tried every rawprogram*.xml combination and here are the error snippets
rawprogram0_BLANK.xml
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
rawprogram0_MSM_xxxxx AND rawprogram2.xml
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
How could I fix this? I really need a detailed instruction for this for it's my first time with QFIL (since this' the first and hopefully the last time for this to happen to me)
so im trying this since yesterday
Please help me ive been trying to find solution everything flashes except when i try flashing vendor.img it says vendor error : buffer overreads occured due to invalid sparse header how can i fix this my device is redmi7A with unlocked bootloader using original cable on usb2 slot trying to unbrick it since yesterday using latest flashtool and drivers using this firmware eu version Xiaomi_Redmi_7A_V11.0.3.0.QCMEUXM_20200728.0000.00_EEA_10_XFT also would like to mention i unlocked bootloader installed twrp and formated all partitions (brave man i am) tryed using the default firmware upgrade tool also tryed manually installing vendor.img from the firmware but no success tryed formating the partition under twrp to ext2 and returned it to ext4 didnt try to change the size or anything ....this all because the default firmware couldnt install game me vendor error ... at this point im giving up on it ... if anyone knows what must be done hes welcome :fingers-crossed:
here is the msg :
fastboot flash vendor vendor.img
target reported max download size of 535821312 bytes
sending 'vendor' (290176 KB)...
OKAY [ 9.152s]
writing 'vendor'...
FAILED (remote: buffer overreads occured due to invalid sparse header)
finished. total time: 12.419s
....last time i ever buy a chinese device from 5-6 different firmwares i could test only 2 because the others didnt have all the files required in the images folder .....chinese piece of trash and thats it...no way of restoring my device even with the default firmware i still cannot understand did i do something wrong or what......
What says when you tried to flash the vendor with twrp?
first check if you using the newest fastboot version via: fastboot --version
are u sure that you have the EEA Hardware?
when u have access to twrp(recovery) try sideload via adb sideload
and here is a how to flash manually link:
[TUTORIAL] How to flash a factory image | Return to stock | Unroot/SAVE your Nexus 5
How to flash a factory image | Return to stock | Unroot your Nexus 5 Hello Nexus 5 Users! I see many users that don't know how to restore their Nexus 5 to stock. It may come in handy, either when you want to RMA your phone, or you want to...
forum.xda-developers.com
plstanchev said:
....last time i ever buy a chinese device .....chinese piece of trash and thats it...
Click to expand...
Click to collapse
this could happen to you with any device! for me the 7A is a really great device. if you unlocked your bootloader you know that there is always a chance to brick your phone! so take responsibility for your actions and don't blame the manufacturer.
PS: if you use more dots and enter it would be much more better to read through your post if someone is trying to help :/
I am also not responsible if anything goes wrong.
May be your download file is corrupted, have you checked the integrity of that file, the extension (.tgz) fastboot firmware.
And flash them with mitool and always download from official site.
Disclaimer:I do not take responsibility for your bricked device. Try it at your own risk.
Notice:This guide is written mainly with these references:
Golv's Reply under Thread "NEW link add ...HTC U11 RUU 3.31.401.1 Dual sim"
paulpier007's GUIDE for Downgrading using HTC DevInfo Tool
Jason10246's Thread for Downgrading using hosd.img with RUU Decrypt Tool
Captain_Throwback's Thread for RUU Decrypt Tool
Introduction:
HTC started to use hosd partition to verify version number when you try to flash RUU since I do not know when for that I have been fairly unaware on HTC devices. A signature error 132 is returned when you try to downgrade with only a changed version number after reading Golv's downgrade guide. Which as a result I decided to write a new guide with a more general but not detailed guide for those with basic understandings of how to do this.
Requirements:
You have read those four threads above
RUU Decrypt Tool and Internet connection
RUU file that you would like to downgrade to
TWRP recovery
HTC adb and fastboot drivers installed and you have no issue finding your device in adb & fastboot
htc_fastboot
Steps:
Use RUU Decrypt Tool to decrypt your RUU using firmware option -f. You need internet connection to do this.
After completed, look for hosd.img in the output folder.
Change version number using Golv's method with HTC Version Tool. You can find it as the attachment.
Flash hosd.img file in bootloader, not download mode.
htc_fastboot flash hosd [pathToHosd.img]
Reboot to Download mode. If successful, the OS version will be the same as your RUU file that we would like to downgrade to.
Flash RUU in Download mode and it is done.
However, if your HTC U11 is the same as mine, Single SIM US Unlocked (WHL), you can just grab the 2.42.617.7 hosd.img that I extracted earlier which is in the attchments.