Hey guys, Ive just successfully rooted my oppo f1s with the latest kingroot last night :laugh: but early on today i cant open my phone :crying: It keeps on rebooting, it only shows the logo then reboots again and again and again, i cant even go to recovery mode, it only stops when battery is drained completely or if its rebooting for too long, i cant remove the battery because it has a non removable battery and i cant shut it down cause it wont :crying::crying::crying::crying: please guys help me, i love that phone so much. I DONT KNOW WHAT IS THE PROBLEM, PLEASE REPLY AND PLS PLS. IF ONe OF YOU KNOWS THE SOLUTION PLS REPLY IMMEDIATELY I WILL APPRECIATE IT SO MUCH (sorry for bad english) PLEASE HELP ME! i just bought it last monday:crying: is it the root the problem or the battery is just wrecked up, this is the only thing that could turn my frown upside down.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have also same problem with oppo f1f. ?
sandiprao said:
I have also same problem with oppo f1f.
Click to expand...
Click to collapse
When did it started? did you root your phone too?
Yes..I did via kingroot and then try to flash twrp via flashfy apk..
sandiprao said:
Yes..I did via kingroot and then try to flash twrp via flashfy apk..
Click to expand...
Click to collapse
does your phone rebootswhenyou are charging? . hope well get a solution in this problem
Are you tried fastboot.. because my device is not detect on pc
I had the same problem after I installed xposed and it's framework the phone rebooted and kept rebooting. I turned it off by pressing power button with volume up. Then booted into recovery by pressing power and volume down then I deleted all the data from one option not as usual recoverise when you delete dalvic and cache then rebooted but the problem was still existed so I deleted data again and the device booted successfully
sandiprao said:
Are you tried fastboot.. because my device is not detect on pc
Click to expand...
Click to collapse
i dont know what is fastboot and i definitely didnt tried it
It is another way to flash ROMs...
yaserch1 said:
I had the same problem after I installed xposed and it's framework the phone rebooted and kept rebooting. I turned it off by pressing power button with volume up. Then booted into recovery by pressing power and volume down then I deleted all the data from one option not as usual recoverise when you delete dalvic and cache then rebooted but the problem was still existed so I deleted data again and the device booted successfully
Click to expand...
Click to collapse
IT WONT LET ME go to recovery mode,. when i tried going to recovery mode, it only shows the oppo logo with a "recovery mode" name located beyond the oppo logo, then reboots again and again. i remember flashing a oppo f1 twrp rom to my phone using the "Official TWRP App" from google play,
link: https://play.google.com/store/apps/details?id=me.twrp.twrpapp
but i dont know if it is successfully flashed, because i does not show any signs such as "TWRP IS SUCCESSFULLY FLASHED, BLAH BLAH BLAH", im so confused now if the flashed were neither successful or not, it only shows nothing when i pressed flash to recovery, then i uninstalled it quickly. That is my conclusion, what do you think
here is the link of the twrp rom: https://twrp.me/devices/oppof1.html
IF YOU KNOW WHAT TO DO, OR OU KNOW YHOW TO REPAIR THIS, PLS EMAIL ME, [email protected] .:fingers-crossed::fingers-crossed:
I WILL APPRECIATE IT SO MUCH, HAPPY HOLIDAYS
sandiprao said:
It is another way to flash ROMs...
Click to expand...
Click to collapse
HOW TO ACCESS IT?
Search on Google...if you don't know then don't mess with ur phone
YES
sandiprao said:
Search on Google...if you don't know then don't mess with ur phone
Click to expand...
Click to collapse
YA'RIGHT MAN, i shouldnt mess up with my phone. i was just being curious, bcoz i know that you know that there are many **** apps in google play, ,hope i'll find a solution:highfive:
Gud luck
Related
So after trying to backup everything in recovery and flash PACMAN ROM for my phone, everything seemed fine, until it rebooted... When the LG logo appeared, suddenly weird horizontal lines started going across my screen and suddenly the edges of the phone started greying until the whole phone started going greyish-white, then powered off. I tried rebooting several times, and eventually it just wouldn't boot at all. If I hild the power button, it vibrates for a sec and nothing. When I plugged it into my PC, I can access it like a USB storage drive and my internal storage is still there, but I can figure out how to fix my phone. Did my screen die? Is there a way I can recover my phone from my PC via USB?
BlackGuyRX said:
So after trying to backup everything in recovery and flash PACMAN ROM for my phone, everything seemed fine, until it rebooted... When the LG logo appeared, suddenly weird horizontal lines started going across my screen and suddenly the edges of the phone started greying until the whole phone started going greyish-white, then powered off. I tried rebooting several times, and eventually it just wouldn't boot at all. If I hild the power button, it vibrates for a sec and nothing. When I plugged it into my PC, I can access it like a USB storage drive and my internal storage is still there, but I can figure out how to fix my phone. Did my screen die? Is there a way I can recover my phone from my PC via USB?
Click to expand...
Click to collapse
Back up your internal storage to your pc, more importantly the nandroid which is in the TWRP folder. Then follow this guide to get your phone back to stock.
I think that rom is kk u can find more info about that problem in liquidsmoth thread please tell me if fix it if not that mean how I know maybe u need to replace something in motherboard
Art is right. Follow the guide to get back to stock. If that doesn't work then it's a hardware problem.
Looks like I'm never trying the pacman rom on the g2...
Ok update. After following the steps in that guide posted, the firmware loaded and the AT&T boot screen popped up after reboot, though now LG Flash Tool is still doing it's thing and the screen's off with the phone still in USB and power light slowly blinking red, so I have no idea if it's fine or not.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
BlackGuyRX said:
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
Click to expand...
Click to collapse
Check the index in my signature, the roms are organised by android version and variant
Art Vanderlay said:
Check the index in my signature, the roms are organised by android version and variant
Click to expand...
Click to collapse
Well, you deserve the Thanks, mate! Maybe he/she is still new here.
raravi said:
Well, you deserve the Thanks, mate! Maybe he/she is still new here.
Click to expand...
Click to collapse
Cheers raravi. I assume it's a guy, as his name is Blackguy lol.
BlackGuyRX said:
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
Click to expand...
Click to collapse
Why dont you serach your requirements in D-802 section. I mean what are doing here bud.
http://forum.xda-developers.com/lg-g2/development-d802
Happened when I was updating twrp:
I downloaded the .img from their website, booted into my older version of twrp, went to flashing pressed the butting in the bottom right corner, selected the file and selected 'recovery'
Said it was successful, so I rebooted, then it wouldn't do anything anymore except for fastboot.
1. Can't boot into recovery
2. Can't boot normally
3. USB debugging disabled
4. oem locked
Only thing I can enter is fastboot.
I followed this guide, but no luck on my end.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Have you tried this?
http://forum.xda-developers.com/oneplus-2/general/guide-return-op2-to-100-stock-unbrick-t3229606
and
All in one toolbox by mauronofrio.
I my self had lost recovery myself and flashed stock image in toolbox and then flashed image from above link to restore to stock and started custom rom process again.
Should not erase twrp once recovered if it has reflash your previous version of twrp or hybrid version.
Hope this helps.
passion8059 said:
Have you tried this?
http://forum.xda-developers.com/oneplus-2/general/guide-return-op2-to-100-stock-unbrick-t3229606
and
All in one toolbox by mauronofrio.
I my self had lost recovery myself and flashed stock image in toolbox and then flashed image from above link to restore to stock and started custom rom process again.
Should not erase twrp once recovered if it has reflash your previous version of twrp or hybrid version.
Hope this helps.
Click to expand...
Click to collapse
It's no use because oem is locked. That means I can't flash anything.
toolbox should still help you unlock bootloader again
Just use the Qualcomm factory restore image to return the phone to original shape of things.
passion8059 said:
toolbox should still help you unlock bootloader again
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pitrus- said:
Just use the Qualcomm factory restore image to return the phone to original shape of things.
Click to expand...
Click to collapse
I have no idea how I would do this without being able to flash anything.
Do you mean that the Qualcomm download program also crashes like fastboot? Sounds like you either have some problems with your windows installation or perhaps you haven't searched for and downloaded the Qualcomm restore if your still trying to flash the ordinary way instead of the emergency way.
Was able to fix it when I was messing around. Not sure what I did but it worked.
Thank you for all your help guys
Theevilsocks said:
Was able to fix it when I was messing around. Not sure what I did but it worked.
Thank you for all your help guys
Click to expand...
Click to collapse
I'm having this problem too, and this isn't helpful. What were the last steps, or at least some of them, that you took to get it working? Which toolkit/script/program were you using? etc
Redjax said:
I'm having this problem too, and this isn't helpful. What were the last steps, or at least some of them, that you took to get it working? Which toolkit/script/program were you using? etc
Click to expand...
Click to collapse
I used this tool: http://forum.xda-developers.com/oneplus-2/general/guide-official-op2-stock-reset-to-oos-3-t3402020
I fiddled around a bit with it, but I'm not sure what I did, and I already deleted the files.
Theevilsocks said:
I used this tool: http://forum.xda-developers.com/oneplus-2/general/guide-official-op2-stock-reset-to-oos-3-t3402020
I fiddled around a bit with it, but I'm not sure what I did, and I already deleted the files.
Click to expand...
Click to collapse
Literally JUST finished with this guide, and my OP2 is alive again! I was going to come back and post. Thanks for the link.
Anyone trying to use this guide without success:
There's one very important step I somehow missed. You MUST disconnect your phone, hold the power button for ~15-20 seconds until it's off, and hold the Volume+ button, THEN plug it back in. Your computer will make the "device connected" sound, but the screen will stay black. THIS IS OK! That means you're in a special recovery, which is where you need to be for the tool.
I also installed the certificate file in the folder I downloaded, then rebooted (it did not work before a reboot, but did work after).
So, the steps:
1. Download the files, make sure your signature signing for drivers is off.
2. Install the trusted certificate, then the driver.
3. Reboot PC
4. Power off phone (hold power for 15-20 secs), hold volume+, then connect through USB (wait for device connected sound, screen on phone will still be black)
5. Run the tool (I ran as admin, not sure if that's required)
6. Weep with joy that you finally found a solution that works.
Hello everyone,
I have a big problem and I can't find a solution.
My phone reboots after 20 seconds.
I just see the logo LeEco and 20 seconds after, it restarts continuously. it does not stop.
I can enter in the fastboot but the usb debugging mode is not enabled so I can' t do anything.
Please, what is the solution ?
Thank you very much
naovich said:
Hello everyone,
I have a big problem and I can't find a solution.
My phone reboots after 20 seconds.
I just see the logo LeEco and 20 seconds after, it restarts continuously. it does not stop.
I can enter in the fastboot but the usb debugging mode is not enabled so I can' t do anything.
Please, what is the solution ?
Thank you very much
Click to expand...
Click to collapse
Are you stock?
Sent from my SM-A730F using xda premium
Yes.
I am on the official Rom. I have never installed any other ROMs and I have never flashed the phone.
Thank you for your reply
naovich said:
Yes.
I am on the official Rom. I have never installed any other ROMs and I have never flashed the phone.
Thank you for your reply
Click to expand...
Click to collapse
You can try to do a hard reset I hope does it but it could be hardware issue.
Sent from my SM-A730F using xda premium
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
naovich said:
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
Click to expand...
Click to collapse
In that case leave it plugged in for a day and then retry reseting. You calibration could be out of whack.
If you are using the Leeco supplied usb C cable, replace it with a higher quality cable.
naovich said:
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
Click to expand...
Click to collapse
I am experiencing the exact same thing. So is someone else in another thread.
Completely stock now it's stuck in a boot loop and Recovery mode shows no options at all. Leaving it in Recovery mode leads to a reboot within 2-3 seconds.
Same as like me, i bought from bangggood 6months ago with problem sometimes restart again that ithink the issue from the software and then i try the Rom that iforget,after that hardbrick ohh no,a good news qfil is coming and i happy,even thought my device is turn on but the problem is same my device sometimes restart again,,,yeahhh at least my device is turn on
i try geneys 26s and root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Genesys 26s Root
Thanks before
me to...somebody pls help me...:crying:
Hello devs and my noob fraans
I am so Happy with this device and all of its developments.
But the only thing I always wanted is to remove that screen which we get when we start our phone in which start is given and and gateway to recovery we have to wait for 5s there or every time to press that start button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
so finally yesterday I was seeing around and went to fast boot mode and restarted my phone in FFBM MODE AND BOOM !!! that screen disappeared I again restarted my phone normally and after that everytime its not coming.
Well yes you also can restore this by going into fast boot again and reboot your device normally from there.
I am currently on aex 5.8 .
May be its a noob thing but I felt many of you need this soo..I posted
And one thing if any pro is reading this
Please tell me what is this ffbm mode and if there are any disadvantages of it..as I am using since 2 days now and no differences are there.
Sorry didn't work for me!!!
supermean1 said:
Hello devs and my noob fraans
I am so Happy with this device and all of its developments.
But the only thing I always wanted is to remove that screen which we get when we start our phone in which start is given and and gateway to recovery we have to wait for 5s there or every time to press that start button so finally yesterday I was seeing around and went to fast boot mode and restarted my phone in FFBM MODE AND BOOM !!! that screen disappeared I again restarted my phone normally and after that everytime its not coming.
Well yes you also can restore this by going into fast boot again and reboot your device normally from there.
I am currently on aex 5.8 .
May be its a noob thing but I felt many of you need this soo..I posted
And one thing if any pro is reading this
Please tell me what is this ffbm mode and if there are any disadvantages of it..as I am using since 2 days now and no differences are there.
Click to expand...
Click to collapse
What is FFBM Mode and pls tell us step by step.
rakeshsainixyz said:
What is FFBM Mode and pls tell us step by step.
Click to expand...
Click to collapse
To go to ffbm you have to go to fastboot mode first then you have to scroll there for ffbm mode I only have seen this in zuk z2 if you are using another phone then I don't know
This is nice and all, but what if your rom get screwed up and you can't reboot to fastboot via software? Is there a button combination to boot into fastboot via hardware?
pipyakas said:
This is nice and all, but what if your rom get screwed up and you can't reboot to fastboot via software? Is there a button combination to boot into fastboot via hardware?
Click to expand...
Click to collapse
Nope, ZUK didn't like the idea of button combination so opted for this screen and I would highly refrain from removing it. I really like the screen btw :angel: And love it when something goes wrong and I can just go through it to Nirvana.
I have z2 pro and this method is not working here.
This screen also shows up on my orbic wonder
Heres the problem I started getting after I took the update from Magisk this morning. I did the update through Magisk app using their recommended method of flashing it I believe and I think thats how the problems started.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it just boot loops now with that message over and over again. On top of that error I am unable to boot into Download Mode or Recovery, I get this when I try to:
Any one have any ideas on how to fix this, I'm all ears. Thanks for the help
arksoother said:
Heres the problem I started getting after I took the update from Magisk this morning. I did the update through Magisk app using their recommended method of flashing it I believe and I think thats how the problems started.
it just boot loops now with that message over and over again. On top of that error I am unable to boot into Download Mode or Recovery, I get this when I try to:
Any one have any ideas on how to fix this, I'm all ears. Thanks for the help
Click to expand...
Click to collapse
Try flashing Mr. Bump linked here -> https://forum.xda-developers.com/showpost.php?p=68638985&postcount=54
rahimali said:
Try flashing Mr. Bump linked here -> https://forum.xda-developers.com/showpost.php?p=68638985&postcount=54
Click to expand...
Click to collapse
So here's the problem with doing this, I have no way of flashing Mr.Bump at the moment with the stupid tablet looping like it is. When I plug in the tablet I don't get the bepoop from my laptop telling me its plugged in and ready to go unless I press the power button and volume down. But then I get what the second picture showed, at that point then the pc does the bepoop sound but I still can't do anything with the tablet. So I guess my next question is how do I flash or use this with the state my tablets in? Thanks.
arksoother said:
So here's the problem with doing this, I have no way of flashing Mr.Bump at the moment with the stupid tablet looping like it is. When I plug in the tablet I don't get the bepoop from my laptop telling me its plugged in and ready to go unless I press the power button and volume down. But then I get what the second picture showed, at that point then the pc does the bepoop sound but I still can't do anything with the tablet. So I guess my next question is how do I flash or use this with the state my tablets in? Thanks.
Click to expand...
Click to collapse
Can you not even boot into bootloader/fastboot or TWRP/recovery?
You should be able to boot to recovery by following the steps shown here -> https://www.hardreset.info/devices/lg/lg-lk430-g-pad-f-70/recovery-mode/
You could also try and boot into safe mode and try and use the magisk manager to uninstall magisk - howto here -> https://www.hardreset.info/devices/lg/lg-lk430-g-pad-f-70/safe-mode/
okay update, so if you look at the fsecond picture it says fastboot_init() I assume this means its initialised? I have no idea what any of the stuff below that means. when I do the recovery mode it shows the words recovery for like a second then gives me the black screen with white text that you see in picture 2. when I try the other method all the tablet does is bootloop with a new error code of 2250 I think. So I have know idea whats going on with this. I'll try uninstalling Magisk like you said but things are looking bleak I feel?
arksoother said:
okay update, so if you look at the fsecond picture it says fastboot_init() I assume this means its initialised? I have no idea what any of the stuff below that means. when I do the recovery mode it shows the words recovery for like a second then gives me the black screen with white text that you see in picture 2. when I try the other method all the tablet does is bootloop with a new error code of 2250 I think. So I have know idea whats going on with this. I'll try uninstalling Magisk like you said but things are looking bleak I feel?
Click to expand...
Click to collapse
somebody else apparently had the same experience although on a different LG device -> https://forum.xda-developers.com/lg-spirit/help/help-fastboot-error-loading-keystore-t3430163
So it seems that fastboot commands may have been disabled which means you can't interact with the device in fastboot mode whatever you do.
If nothing else works, you could try and re-flash stock ROM if you can manage to get into download mode.
Best of luck!