I can not able to reboot/switch on withoout connecting it to charger please help - YU Yureka Q&A, Help & Troubleshooting

I encountered aanother problem after flashing roms on my yureka YU5510A.......
after intall MIFAVOR with Volte upadate.....it worked fine for 3-4 hours and suddenly rebooted and stuck on bootloop of yu logo.:crying::crying::crying:
then I have to flash stock rom cm 12.1 {using flash all method}
and it worked perfectly till ......as I make call it will reboot
i thought it has bugs, so I unlocked bootloader,install twrp recovery and su binary and flashed cm 14 ........then i see it is not rebooting and STUCKED ON BOOTLOOP and i tried another roms also same problem encounterd.
then i uesd unbricktool by annabhatina and again flashed stock cm12.
Then also it is STUCKED ON BOOTLOOP.
THEN I tried alot by switch on by power button and then I found solution that when I try to switch on while charging then it will be swiched on.
PLEASE HELP I WANT A PERMANENT SOLUTION
{battery is working fine ...I used another yurekas battery }
please help .....................
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

I'm having same issue with my Yureka plus, when I turn on data it is restarting, and get stuck into boot loop, To start it normally I need to connect it to charger,
I thought it could be problem of cache, but after clearing it there is no change,, I flashed miui 8 as I thought it is problem of ROM, but after flashing miui no change in behaviour,,
Is there any solution to this?

Sumit_T said:
I'm having same issue with my Yureka plus, when I turn on data it is restarting, and get stuck into boot loop, To start it normally I need to connect it to charger,
I thought it could be problem of cache, but after clearing it there is no change,, I flashed miui 8 as I thought it is problem of ROM, but after flashing miui no change in behaviour,,
Is there any solution to this?
Click to expand...
Click to collapse
Change the battery!!

XIHunter said:
Change the battery!!
Click to expand...
Click to collapse
No, still in a loop after changing battery...

checked it with another yureka plus battery
but no change still in bootloop until start it with conneting it to charger

Related

[HELP!] After E5 bootloops and left it for a day, it won't turn on!

My device is E500H, it turned bootloop. But then, I am confident because I know how to fix it so I download the firmware to fix it throught ODIN. But when I try to fix it and switch to download mode, IT WONT SWITCH (After I left it for almost 24 hrs). I thought it's BATTERY IS LOW. So I charged it for an hour, and after it I check it again but there still no response. -_- WHAT HAPPENED? How can I fix this? This is my first time to encounter this and first time to post here because really need urgent help.
Solved
Since its a bootloop try draining the battery fully. Then connect your charger. Immediately before the boot logo apears hold the three buttom combo for recovery mode. Wipe data and cache and then reboot. Hope I helped
Shravan21495 said:
Since its a bootloop try draining the battery fully. Then connect your charger. Immediately before the boot logo apears hold the three buttom combo for recovery mode. Wipe data and cache and then reboot. Hope I helped
Click to expand...
Click to collapse
False alarm, yea you are right. It was drained. Haha. Though, after I flashed the firmware the bootloops still persist. -_- Tried many times flashing via Odin but when it reboots, the problem is still there.
epikotaku said:
False alarm, yea you are right. It was drained. Haha. Though, after I flashed the firmware the bootloops still persist. -_- Tried many times flashing via Odin but when it reboots, the problem is still there.
Click to expand...
Click to collapse
You have to factory reset via recovery.
Remove cache from recovery.
Sent from my SM-E700H using Tapatalk
I Got the same problem
I flashed my E5 then i rebooted it it stuck on the animation
now i dont know what to do
Please i need HELP!!!
i cant do recovery mode!
GTRX34 said:
I Got the same problem
I flashed my E5 then i rebooted it it stuck on the animation
now i dont know what to do
Please i need HELP!!!
i cant do recovery mode!
Click to expand...
Click to collapse
When it stuck on the animation then press volume down+power+home button together for some time , it will again go into download mode , then flash previous rom which you were using earlier ,After flashing previous rom factory reset then wipe data /cashe . Now again flash rom which you want to install.
GTRX34 said:
I Got the same problem
I flashed my E5 then i rebooted it it stuck on the animation
now i dont know what to do
Please i need HELP!!!
i cant do recovery mode!
Click to expand...
Click to collapse
I experienced the same problem in my galaxy E7. I had 87% charge when i flashed the new update and it stuck in a bootloop.
Drained the battery. Connected charger and went to recovery before it started. Cleared cache and did factory reset. Started normally after that.

unknown issue in yureka

i didnt do anything with my yureka, tomorrow its battery dropped down and switched off so i put it on charging after decent charge upto 80%, then i tried to switch i on but its stuck at cyanogen logo.
here's what i already tried 1. i went to recovery and wiped data and tried rebooting. nothing happened still stuck at cyanogen logo/
2. i tried unlocking bootloader but i cant, coz i cant turn on usb debugging. and all in one toolbox needs my device in turn on state which i cant do.
3. i downloaded a custom rom of marshmellow cm13 but it gave me signature error when i tried to flash it via stock recovery.
4. then i downloaded the rom provided to me via cutomer support it sucessfully flashed but still stuck at cyanogen logo/
now m fedup i dont know what to do please give me sugestions thank you.
I took it to service center and they said motherboard is faulty and asked 6000 fr repair, i was hopeless coz i tried unlocking bootloader it said ok and then tried installing custom recovery but nothing happened it still boots in stock recovery then i used
Fastboot -i 0x1ebf boot recovery so it boots in twrp and then i was able to access internal memory and flash new rom but to my surprise it also got stuck at boot logo. So i guess now i have no other option but to buy new phone.
I come to this point that yureka phones/ micromax phns are not very good phn to buy all micromax phns ive ever came across didnt stood fr more than one year.

Yureka Rebooting Problem!! Plz help

My yureka is rebooting continuously while using, the yu logo appear and disappear again and again...... If I connect it to the charger it will successfully reboot but after disconnecting charger the problem still exit. This problem arises in all rom which are i'm using cm13(nightlies), resurrection remix, miui 8 v8.0.10.0. But after flashing miui 8 v6.8.11 in first boot yu logo appears for 30-35seconds then disappear then again reboot goes into recovery mode.
I also flash stock rom cm12.0 but after using 10-20seconds it goes into reboot takes the whole reboot and then after using 10 seconds again reboot.
Plz help me!!!!
Anna bathing and more developer on yureka help to solution for this problem.
Sorry for type mistake in title but I don't mention from that word. I need apologize for this mistake.
Annabathina and you developers make solution for this problem.
My yureka is rebooting continuously while using, the yu logo appear and disappear again and again...... If I connect it to the charger it will successfully reboot but after disconnecting charger the problem still exit. This problem arises in all rom which are i'm using cm13(nightlies), resurrection remix, miui 8 v8.0.10.0. But after flashing miui 8 v6.8.0.2.0 in first boot yu logo appears for 30-35seconds then disappear then again reboot goes into recovery mode.
I also flash stock rom cm11 and cm12 and cm12.1 but after using 10-20seconds it goes into reboot takes the whole reboot and then after using 10 seconds again reboot.
Plz help me!!!![/QUOTE]

DEAD with blue LED

Hi, i need your help. My k920 just went dead with blue LED. ive tried flashing STOCKrom uing QFIL and was successful, but still same problem when booting.
things ive done:
1. flash stock rom - problem still occurs on booting
2. unlock bootloader with TWRP- - problem still occurs on booting
3. flash TWRP recover - problem still occurs on booting
4. removed the battery, and reconnect again after 10 minutes. - problem still occurs on booting
really need your help.
k920 ROW kitkat
Same Problem
I'm having the same problem with my Lenovo K920.
Does anyone have a fix for this.
i would also appreciate any help given.
Thank you.
mquinto28 said:
Hi, i need your help. My k920 just went dead with blue LED. ive tried flashing STOCKrom uing QFIL and was successful, but still same problem when booting.
things ive done:
1. flash stock rom - problem still occurs on booting
2. unlock bootloader with TWRP- - problem still occurs on booting
3. flash TWRP recover - problem still occurs on booting
4. removed the battery, and reconnect again after 10 minutes. - problem still occurs on booting
really need your help.
k920 ROW kitkat
Click to expand...
Click to collapse
Not sure if your phone fixed?
I faced the same problem this afternoon but i managed to fix it with QFIL with ROW + Chinese modem file (Yeah, I am having CN edition)
I still stuck with 5.0.2 now but is ROW instead of CN ROM.
i failed to fastboot flash recovery twrp.img as always hit "Waiting for Device"
I also failed to get into bootloader too
mquinto28 said:
Hi, i need your help. My k920 just went dead with blue LED. ive tried flashing STOCKrom uing QFIL and was successful, but still same problem when booting.
things ive done:
1. flash stock rom - problem still occurs on booting
2. unlock bootloader with TWRP- - problem still occurs on booting
3. flash TWRP recover - problem still occurs on booting
4. removed the battery, and reconnect again after 10 minutes. - problem still occurs on booting
really need your help.
k920 ROW kitkat
Click to expand...
Click to collapse
I have the same problem as well with only blue LED lighting up and also did all the steps you did. It started with random reboots, then the blue screen reboot and now just the blue LED. Even with power plugged in it doesn't seem to be charging either. Anyone have any ideas?
mquinto28 said:
Hi, i need your help. My k920 just went dead with blue LED. ive tried flashing STOCKrom uing QFIL and was successful, but still same problem when booting.
things ive done:
1. flash stock rom - problem still occurs on booting
2. unlock bootloader with TWRP- - problem still occurs on booting
3. flash TWRP recover - problem still occurs on booting
4. removed the battery, and reconnect again after 10 minutes. - problem still occurs on booting
really need your help.
k920 ROW kitkat
Click to expand...
Click to collapse
Try getting the hardware checked.

poco m3 not turning on

ok guys i know there are loads of threads about thois but ive got a slightly differen situation.
my daughter had this phone and then it suddenly tured off and wouldn't turn back on, i managed to get it to boot by disconnecting the battery and plugging it while holding the power down and reconnecting the battery which put me into fastboot then the boot to edl script made the phone boot. i have since unlocked the bootloader and flashed twrp and the reflashed the stock firmware which worked for a few hours but i tried to reboot it and now it wont boot, i can get to twrp but even if i flash the stock firmware it refuses to boot any idea on what i should do to try to get this phone to boot up?
Try to flash a custom rom, as far as i know this problem is caused by a MIUI update.
Joaoovn said:
Try to flash a custom rom, as far as i know this problem is caused by a MIUI update.
Click to expand...
Click to collapse
i have tried to flash a couple but every time i try it fails with error 7 and tried the normal fix but it doesnt help. then anything i do in twrp makes the system unmount and then it cant mount again. the only eay to get to get it to boot again is to take the back off and disconnect the battery and hold the power button down when i reconnect it but ive got no idea why it does this.

Categories

Resources