Zuk z1 stuck with teamwin recovery after clean wipe - Zuk Z1 Q&A, Help & Troubleshooting

hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you

ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?

strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..

What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..

strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here

ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?

strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..

ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.

strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only

ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:

strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only

ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery

strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off

ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool

strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now

ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?

Related

Recovery will not boot, wrong recovery flashed?

The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Installed Flashify and used that to flash TWRP 2.8.6.0 and it has the same problem. I don't think the issue is the TWRP version used, must be something else?
Oxyacetylene said:
The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Click to expand...
Click to collapse
Hi!
I'm having the same problem. Can't get into recovery to install custom rom.
did you fix it?
Oxyacetylene said:
The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Click to expand...
Click to collapse
have a look at skr tools and see if it has an option.for your problem.. and the most easiest thing would be to go back to stock rom.. and start from there
raptorddd said:
have a look at skr tools and see if it has an option.for your problem.. and the most easiest thing would be to go back to stock rom.. and start from there
Click to expand...
Click to collapse
Can i flash stock VS98039a? I am currently on VS9803aa.
SkuLL. said:
Can i flash stock VS98039a? I am currently on VS9803aa.
Click to expand...
Click to collapse
I dont know what he numbers mean.? but what are they KITKAT or LP.?
raptorddd said:
I dont know what he numbers mean.? but what are they KITKAT or LP.?
Click to expand...
Click to collapse
Lollipop
SkuLL. said:
Lollipop
Click to expand...
Click to collapse
but i do not understand whats your point.? what do you want to do , need more info..
raptorddd said:
but i do not understand whats your point.? what do you want to do , need more info..
Click to expand...
Click to collapse
I am on software version VS9803aa, can i restore it to VS98039a? I am having problem installing TWRP on 3aa.
SkuLL. said:
I am on software version VS9803aa, can i restore it to VS98039a? I am having problem installing TWRP on 3aa.
Click to expand...
Click to collapse
am not familiar with those numbers.. but if its a stock rom.. yes.. if is flashable its ok its its thru flash tools .its okey so you may fix some rom problem installation..

CM based ROMs no longer booting

Hi,
I ve tried everything I know but the OnePlus 2 of a friend no longer boots CM based ROMs and camera and much Sensors wont work anymore....
does anyone know why this is or how to fix it?
I really THANK YOU for answers!
revert back to OOS2.x via TWRP [latest version is 3.0.2.0].
once you have installed OOS2.x reboot to recovery and flash CM13+GApps [download latest one from opengapps.org].
zipalign said:
revert back to OOS2.x via TWRP [latest version is 3.0.2.0].
once you have installed OOS2.x reboot to recovery and flash CM13+GApps [download latest one from opengapps.org].
Click to expand...
Click to collapse
we did this....but still bootloop...
flo071 said:
we did this....but still bootloop...
Click to expand...
Click to collapse
if you can access in fastboot mode, then check this tool.
it helped me when I was stuck.
zipalign said:
if you can access in fastboot mode, then check this tool.
it helped me when I was stuck.
Click to expand...
Click to collapse
thanks...we will try..

Fail in flashing TWRP

Hi all I have face issue in my grand 2 7102 device. And issue is when try to flash TWRP Recovery with all 3 methods Odin flashify and flashable zip file and I try all methods but after flash TWRP recovery it's falil I mean it again put me in download mode.So any solution available then help me......
First Answer my few questions?
1. Your phone is able to boot in system or stuck in odin.
2. Tell me your Os version.
3. You are able to access stock recovery or not.
Sharma Manu said:
First Answer my few questions?
1. Your phone is able to boot in system or stuck in odin.
2. Tell me your Os version.
3. You are able to access stock recovery or not.
Click to expand...
Click to collapse
CWM work perfectly for me now i am in Resurrection Remix marshmallow rom but before i am on stock 4.4.2 but when i flash twrp its not flashing all methods again put me in download mode again that's all.
mahu patel said:
CWM work perfectly for me now i am in Resurrection Remix marshmallow rom but before i am on stock 4.4.2 but when i flash twrp its not flashing all methods again put me in download mode again that's all.
Click to expand...
Click to collapse
Sorry for My late reply:highfive: M little busy
Use this link to download recovery:-
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0?_e_pi_=7,PAGE_ID10,9134887488
And please say Thanks to aapav01 for his hard work use only odin flash file .tar personally this works for Me..
Sharma Manu said:
Sorry for My late reply:highfive: M little busy
Use this link to download recovery:-
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0?_e_pi_=7,PAGE_ID10,9134887488
And please say Thanks to aapav01 for his hard work use only odin flash file .tar personally this works for Me..
Click to expand...
Click to collapse
Man i told u before i tried these all exactly 3 type of file with 3 methods.
If TWRP doesnt work, idk if this can help you. The last options is flash other recovery to remove this problem. Try philz and cwm (which is the same but philz is advanced). Tip: If one recovery doesnt work dont try it
PS: You have the same scenario like me on TWRP installation
NYT_RootComm said:
If TWRP doesnt work, idk if this can help you. The last options is flash other recovery to remove this problem. Try philz and cwm (which is the same but philz is advanced). Tip: If one recovery doesnt work dont try it
PS: You have the same scenario like me on TWRP installation
Click to expand...
Click to collapse
Ya know it i flash 10 CUSTOM rom before but mostly upcoming rom work with only twrp sooooo
mahu patel said:
Ya know it i flash 10 CUSTOM rom before but mostly upcoming rom work with only twrp sooooo
Click to expand...
Click to collapse
Really? Crap, i have to change recovery.
NYT_RootComm said:
Really? Crap, i have to change recovery.
Click to expand...
Click to collapse
No not at all u didn't need to change now wait some time if u need then change upcomung Nougat 7 version work with all type of recovery s so don't need to change
mahu patel said:
No not at all u didn't need to change now wait some time if u need then change upcomung Nougat 7 version work with all type of recovery s so don't need to change
Click to expand...
Click to collapse
Typically root community is getting better and better everyday
NYT_RootComm said:
Typically root community is getting better and better everyday
Click to expand...
Click to collapse
Ya awesome progress.I am 100% sure it's better than manufacturer like samsung
I have same issue I tried many methods to flash twrp but everytime it fails cwm just work flawlessly but then I tried flashing twrp.img file with flashify and it works thanx

J500FN won't boot custom ROMs

I have OEM unlocked, TWRP flashed, and yeah.
Trying to flash Resurrection Remix and once it's done and I reboot, I get a yellow screen with a couple lines and it gets much worse.
http: // i. imgur . com/ IZ9o3eX .jpg
Which Android version are you using?
Ragazzza said:
Which Android version are you using?
Click to expand...
Click to collapse
6.0.1.
That is the reason, you need to be on 5.1 Lollipop to flash that ROM
All you can do now is flash stock ROM, and start all over
Ragazzza said:
That is the reason, you need to be on 5.1 Lollipop to flash that ROM
All you can do now is flash stock ROM, and start all over
Click to expand...
Click to collapse
AH, so, can I downgrade to 5.1, then flash it?
iiCarelessness said:
AH, so, can I downgrade to 5.1, then flash it?
Click to expand...
Click to collapse
Sure thing fam, you can, download ODIN, and go to sammobile.com and choose 5.1 Lollipop for your country, and flash it. Root you phone after that and install twrp then flash the RR ROM, it will work, good luck
And next time, read the thread better before flashing ROM, next time it could be worst.
Ragazzza said:
Sure thing fam, you can, download ODIN, and go to sammobile.com and choose 5.1 Lollipop for your country, and flash it. Root you phone after that and install twrp then flash the RR ROM, it will work, good luck
And next time, read the thread better before flashing ROM, next time it could be worst.
Click to expand...
Click to collapse
Thank you so much, I appreciate it.
I just skimmed over aha.
iiCarelessness said:
Thank you so much, I appreciate it.
I just skimmed over aha.
Click to expand...
Click to collapse
np bro, report back results so i can know you suceeded
Ragazzza said:
np bro, report back results so i can know you suceeded
Click to expand...
Click to collapse
"Unfortunately, SystemUI has stopped."
I can boot the phone, just can't do anything with it.
Can't use 5.1.1 on my J500FN at all, which is disappointing.
The ROM just hangs on the boot logo, even after I've cleaned system, cache, and data.
iiCarelessness said:
Can't use 5.1.1 on my J500FN at all, which is disappointing.
The ROM just hangs on the boot logo, even after I've cleaned system, cache, and data.
Click to expand...
Click to collapse
1) Go to recovery and wipe /system , /data , /cache and dalvik-cache
2) Power off the phone (from recovery).
3) Boot in Download mode and flash the Lollipop 5.1.1 firmware you want.
3) Wait until phone boots succesfully. Then you can flash TWRP for Lollipop 5.1.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 .
Always do the step 1) before upgrading / downgrading Android version, but also when reflashing stock rom with same Android version.
#Henkate said:
1) Go to recovery and wipe /system , /data , /cache and dalvik-cache
2) Power off the phone (from recovery).
3) Boot in Download mode and flash the Lollipop 5.1.1 firmware you want.
3) Wait until phone boots succesfully. Then you can flash TWRP for Lollipop 5.1.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 .
Always do the step 1) before upgrading / downgrading Android version, but also when reflashing stock rom with same Android version.
Click to expand...
Click to collapse
This worked, but I'm having issues with /system not being found while flashing RR 6.0.1.
iiCarelessness said:
This worked, but I'm having issues with /system not being found while flashing RR 6.0.1.
Click to expand...
Click to collapse
Try to mount /system manually before flashing it.
#Henkate said:
Try to mount /system manually before flashing it.
Click to expand...
Click to collapse
I got it fixed, I wasn't on the right version of TWRP.

[Solved] LG G4c H525n twrp bootloop

Problem caused: Factory reset in custom ROM, causing the phone to boot into twrp (even when plug in charger)
Method: refer to post #6 below
Anghirrim_shared_drive (Maintained by Anghirrim)
OP: Tried to perform a factory reset on LOS 14.1, it didn't go as plan. The phone boots into twrp, after I tried to flash LOS 14.1 over MM_rootable. The phone keeps booting into twrp, even though there is a ROM installed.
I assume I messed my boot partition tho?
Did more searching on this issue, from other model of phone also experiencing similar issue. It was a twrp bootloop.
my best bet is to grab a boot.img and flash it.
@Anghirrim sorry to interupt you, but do you have any method for fixing this?
Currently stuck at twrp. even I tried to boot into system/ download mode/ bootloader etc. It just bring me back to twrp. Couldn't use LGUP becoz I can't get into download mode. now I stuck with a phone with only twrp.
Tried flashing MM_flashable and return flashed successfully, but still boot into twrp.
Edit: Tried to plug my phone into a charger, brings me into twrp
purpleish said:
@Anghirrim sorry to interupt you, but do you have any method for fixing this?
Currently stuck at twrp. even I tried to boot into system/ download mode/ bootloader etc. It just bring me back to twrp. Couldn't use LGUP becoz I can't get into download mode. now I stuck with a phone with only twrp.
Tried flashing MM_flashable and return flashed successfully, but still boot into twrp.
Edit: Tried to plug my phone into a charger, brings me into twrp
Click to expand...
Click to collapse
Hi, did you try to factory reset it under stock flashable firmware ? Because if you did so, it will bootloop into TWRP trying to reach stock recovery.
Anghirrim said:
Hi, did you try to factory reset it under stock flashable firmware ? Because if you did so, it will bootloop into TWRP trying to reach stock recovery.
Click to expand...
Click to collapse
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
purpleish said:
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
Click to expand...
Click to collapse
Yes there is. Can you first have a look at my Google Drive? I think I uploaded a .txt file with the instructions.
purpleish said:
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
Click to expand...
Click to collapse
There is a TWRP bootloop fix .txt file on my Gdrive. Can you have a look at it and report if it works?
Anghirrim said:
Yes there is. Can you first have a look at my Google Drive? I think I uploaded a .txt file with the instructions.
There is a TWRP bootloop fix .txt file on my Gdrive. Can you have a look at it and report if it works?
Click to expand...
Click to collapse
Yes, It works. Thank you.
Updated title & OP
purpleish said:
Yes, It works. Thank you.
Updated title & OP
Click to expand...
Click to collapse
Side point, I personaly prefer AEX (AOSPExtended) over LOS.
Anghirrim said:
Side point, I personaly prefer AEX (AOSPExtended) over LOS.
Click to expand...
Click to collapse
0.o , could try that as well.
Flashing it after download is complete.
Edit, danm it O .o turns into
Any issue?
Anghirrim said:
Any issue?
Click to expand...
Click to collapse
didn't flashed yet. I would let you know after I flash it.
Anghirrim said:
Any issue?
Click to expand...
Click to collapse
Phone flashed, still trying out the ROM.
will give an update a week later
@Anghirrim Nice ROM, everything I wanted is included in the rom.
but I have some problem with magisk manager, it wasn't working. (coz I want to get root)
1. How to get twrp
2. and therefore flash magisk manager
Edit: Nah, just have to redo it. Everything was good.
Maybe one day I should port AEX to another phone (cough cough Galaxy S2 cough cough).

Categories

Resources