Hi, im test
Kingroot
iRoot (not safe for use, install malware (PUP) in smartphone)
SRSRoot
and dont work!
please help me found root method for uninstall system apps!
thanks
hi! i have unlock frp and root the vdf600 but i wait your autorization for post the guide ...
All necessary files for rooting can be found here: https://mega.nz/#F!WY41gA7D!q4MGbUwRuCaIp-qPSdic0w
IMPORTANT: you have to be on this firmware "
VDF-VFD600B01-UK_MR01b"
You can Root by doing the following:
1: Install Kingroot Apk: NewKingrootV5.0.5_C172_B397_en_release_2017_03_13_20170313191418_105203
2: Install Flashify from Google Play Store
3: Run Kingroot
4: If it says successful then open flashify and flash TWRP: TWRP 3.0.2-0.img
5: Reboot to Recovery
6: Factory reset and then install this file: Kasım_TWRP(MR02e-2).zip
7 : Install: VFD600 Google Fix.zip
8: Install: SuperSu.zip
9 :Reboot
You should now be Rooted.
P.S. you need to get Xposed installer to get xposed
TSMKFail said:
All necessary files for rooting can be found here: https://mega.nz/#F!WY41gA7D!q4MGbUwRuCaIp-qPSdic0w
IMPORTANT: you have to be on this firmware "
VDF-VFD600B01-UK_MR01b"
You can Root by doing the following:
1: Install Kingroot Apk: NewKingrootV5.0.5_C172_B397_en_release_2017_03_13_20170313191418_105203
2: Install Flashify from Google Play Store
3: Run Kingroot
4: If it says successful then open flashify and flash TWRP: TWRP 3.0.2-0.img
5: Reboot to Recovery
6: Factory reset and then install this file: Kasım_TWRP(MR02e-2).zip
7 : Install: VFD600 Google Fix.zip
8: Install: SuperSu.zip
9 :Reboot
You should now be Rooted.
P.S. you need to get Xposed installer to get xposed
Click to expand...
Click to collapse
this works. the only trouble i had is that king root would say rooted and on reboot, it would say it needed rooting again.
i added a step of opening the developer options, then clicking the "stay awake when plugged in" and then king root wouldn't freeze up, and root would stay active, at least until the rest of the steps were followed.
thanks
Hello! I've done all the steps but my mobile keeps on the logo screen, what should i do?
Related
Clean install of a ftf is better than Flashing a Pre-Rooted zip. I flashed a Lp Pre-Rooted zip and face some problem... Specially battery drainage issue. So I installed the clean LP ftf. And rooted it afterwards... My battery is a beast now
Requirements
1: King Root
2: XZDualRecovery 2.8.15-RELEASE.installer.zip http://nut.xperia-files.com/
3: BETA-SuperSU-v2.49.zip
(SuperSU-v2.46 will give you binary update error) (place this zip in your internal memory/Sdcard
Steps
1: Flash your latest ftf of LP 5.0.2 via flashtool to start a clean install. IF You are already on LP, ignore step 1.
2: Install King Root Apk and Run it. Click on root. Wait until it says 100%. It should be 100%. U rooted your mobile successfully. Don't restart your mobile.
3: Place XZDualRecovery 2.8.15intsaller.zip in any folder of your PC and extract it.
4: Connect your mobile to your computer with Debugging mode enabled.
5: Open XZDualRecovery folder and Click on Install.bat. A command window will be opend. Choose/Type 2 (root with SuperUser) and pres enter. Follow the instructions... Done... XZDualRecovery is installed
6: Boot in to recovery and Install BETA-SuperSU-v2.49.zip. Restart your mobile... You have a working SuperSu without any binary update problem.
7: Delete KingUser App Manualy by Going into /system/app/kinguser.apk. Or u can delete it by some system app remover application. It is necessary to delete King User App because It may be cause conflict with SuperSu.
All Done.....
Working On
Xperia Z2 Z3 [.690] [.726] [.28]
After a couple of days bricking around, finally found a way to have all the goodies and still have full device encryption. Something that isn't working with custom recovery installed.
Short guide:
1. Stock ROM 5.1.1
2. Encrypt device first (!)
3. Root using Kingroot (NewKingrootV4.82_C138_B250_xda_release_2016_03_09_105243.apk) (http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461)
4. Reboot
4. Remove Kingroot and install SuperSu using this guide (http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html)
5. Reboot
6. Download Xposed Framework sdk22, arm (not arm64) from http://forum.xda-developers.com/showthread.php?t=3034811
6. Install Xposed Framework zip trough flashfire-0.24.apk using this guide (http://forum.xda-developers.com/g4/themes-apps/guide-installing-xposed-locked-t3181593)
7. Reboot
7. Install the xposed installer
8. Good to go!
Finally have all the tweaks and no worries in case of lost/stolen device.
It's working!
Only followed steps 3 to 5 though.
Rest are not required.
Do I need to have a unlcoked bootloader?
Dinkec27 said:
Do I need to have a unlcoked bootloader?
Click to expand...
Click to collapse
no, you keep all the goodies
Please, note that according to this thread :
http://forum.xda-developers.com/z3-compact/general/kingroot-4-0-t3105593
There may be issues with privacy and your IMEI may be sent to China when you're rooting with Kingroot... Which may be bad. Pretty bad. (It allows for instance the creation of fake phones with real IMEI.)
Has anyone tried flashing Xposed through Flashfire on Android 6.0.1 Beta?
I get root with this easy method, thank you man!
I try to install V4A (through Apk) but when i install the drivers, a message says: "Driver install failed: the busybox installation on you device does not work... etc."
I have just installed the last version of busybox in /system/xbin.
How can i resolve it?
FunkyCrime said:
I get root with this easy method, thank you man!
I try to install V4A (through Apk) but when i install the drivers, a message says: "Driver install failed: the busybox installation on you device does not work... etc."
I have just installed the last version of busybox in /system/xbin.
How can i resolve it?
Click to expand...
Click to collapse
I think you need to install XZDualRecovery because that has the RIC fix(basically read and write permissions for system without unlocked bootloader),I had this issue as well and this solved it for me
You don't need pc to do it.
1. Install kingroot 4.90
2. Install SuperSu from Google Plus, don't start it
3. Install flashfire
4. Convert kingroot to SuperSu - https://www.droidmen.com/remove-replace-kingroot-kinguser-with-supersu/
#4 uninstall kingroot
Reboot
5. Download xposed framework v80 edition by SolarWazer
6. Install #5 using flashfire
Reboot
7. Finally install XposedInstaller_3.0_alpha4.apk
8. You have:
Root
SuperSu
Xposed
LB - lock bootloader
I test it with RN 3 Pro Prime miui 7.1.9.0
You need tools and Google Play
Tools - https://mega.nz/#!mZxzHAiY!ZQC_NQSm0IxoTGoMGparuVF3URbItxa86cJfn2qlbYs
after making the root, when a 5 applications requesting access to the root, the rest can not get root ... used the auto root chainfire...
Galaxy E700M 5.1.1 Android
This problem is the kernel of rom
The cf auto root is Released for first rom e7 5.1.1
I installed second lollipop and see this error
I recomend install first 5.1.1 or
Test another root method
--------------
Second solution
1. Remove supersu pro
2. Update supersu via play store
3. Reboot
4. Install Root Browser 4
5. Open Root Browser and install Busybox
6. Reboot
7. Enjoy your SuperSu
After updating magisk to version 18, oneplus 5t wasn't remain rooted but got stuck in bootloop. I after many attempts got the method to root it again.
I'm not a developer. I'm just an ordinary Android user. I didn't find any method on xda until now so think to help others.
Here I'll show you the step by step procedure to get root with the updated version of magisk.
I've tested it on my oneplus 5t with latest Android Pie.
Do it on you own risk I'm not responsible if you get brick your device.
Download all necessory files before get start.
1. TWRP recovery
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
2. Magisk
link in description
3. Xposed Framework
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
4. Copy Magisk and Xposed framework files to mobile.
Procedure
1. Open Fastboot menu and connect device to PC.
2. Install TWRP recovery for pie.
i. download the .img recovery file.
ii. place it in "Minimal ADB and Fastboot" folder and copy its name.
iii. open terminal and write "fastboot flash recovery "copied name".img " and hit enter.
3. After installing TWRP, reboot to recovery by pressing volume down key.
4. Install magisk and reboot.
i. Reboot the device and install magisk manager apk.
ii. and make sure that you got stable root.
5. Reboot to recovery and install Xposed framework
i. method is in the link given above.
a. Download and install the Riru Core Magisk Module.
b. Download and install the EdXposed Magisk Module.
c. Reboot your phone.
d. Install the Xposed Installer APK from XDA Senior Member DVDandroid.
6. done. If you did the same then you got rooted with magisk 18.2.
hmm
Mirza_Husnain said:
After updating magisk to version 18, oneplus 5t wasn't remain rooted but got stuck in bootloop. I after many attempts got the method to root it again.
I'm not a developer. I'm just an ordinary Android user. I didn't find any method on xda until now so think to help others.
Here I'll show you the step by step procedure to get root with the updated version of magisk.
I've tested it on my oneplus 5t with latest Android Pie.
Do it on you own risk I'm not responsible if you get brick your device.
Download all necessory files before get start.
1. TWRP recovery
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
2. Magisk
link in description
3. Xposed Framework
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
4. Copy Magisk and Xposed framework files to mobile.
Procedure
1. Open Fastboot menu and connect device to PC.
2. Install TWRP recovery for pie.
i. download the .img recovery file.
ii. place it in "Minimal ADB and Fastboot" folder and copy its name.
iii. open terminal and write "fastboot flash recovery "copied name".img " and hit enter.
3. After installing TWRP, reboot to recovery by pressing volume down key.
4. Install magisk and reboot.
i. Reboot the device and install magisk manager apk.
ii. and make sure that you got stable root.
5. Reboot to recovery and install Xposed framework
i. method is in the link given above.
a. Download and install the Riru Core Magisk Module.
b. Download and install the EdXposed Magisk Module.
c. Reboot your phone.
d. Install the Xposed Installer APK from XDA Senior Member DVDandroid.
6. done. If you did the same then you got rooted with magisk 18.2.
Click to expand...
Click to collapse
It dont work it still gives boothaning on the Oneplus logo
And that means that i cant follow all your text , im not able to install Magisk Apk
so the rest of your list is not a possibly for me
zagget said:
It dont work it still gives boothaning on the Oneplus logo
And that means that i cant follow all your text , im not able to install Magisk Apk
so the rest of your list is not a possibly for me
Click to expand...
Click to collapse
Really sad that it doesn't work for you.
Try this:
Install ROM from zero, (or wipe it off). Then try to install the magisk 18.2.
Hopefully it'll work for you.
Thanks
I will look at it
But is stupid that i need to install the rom from start
And where is Magisk 18.2 comming from
The last one on the official page is 18.1
So how do you get the Magisk 18.2