Related
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
franky.frangi said:
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
Click to expand...
Click to collapse
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
lferlito said:
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
Click to expand...
Click to collapse
No, it goes into logos loop.
franky.frangi said:
No, it goes into logos loop.
Click to expand...
Click to collapse
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
lferlito said:
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
Click to expand...
Click to collapse
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
franky.frangi said:
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
Click to expand...
Click to collapse
on my L5, i long press those 3 buttons until LG logo boot appears..
i wait some second and it appears the CWM reco
i don't know if there are other ways to enter in recovery mode..
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
franky.frangi said:
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
Click to expand...
Click to collapse
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
did forcing recovery/download work ?
TahaX said:
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
Click to expand...
Click to collapse
the phone off usb in and buttons did it work ?
Actually didn´t work,I have drivers already, LG PC Suite program , and KDZ. Problem is my phone is not detected by pc, so kdz unzips and then says : phone not detected, with or without battery...doesn´t go into recovery mode with buttons, just lg and cyanomod logos...
I don`t know if this can b fixed.....How can you flash anything if it´s not detected....
I´ll give it a try again tomorrow, without trying to enter recovery mode....but tried lots of buttons combinations and wasn´t working
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
IGGYVIP said:
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
Click to expand...
Click to collapse
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
franky.frangi said:
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
Click to expand...
Click to collapse
happy flashing
Hi
I rooted my nexus 10 some months ago. All worked fine until yesterday. I wanted to go back to original firmware and used the WUGs nexus root toolkit to download 4.4.3 version and flash it. But afterwards the tablet doesnt boot anymore. Google logo appears and then the circle thing never goes away. I searched many threads, and all base on going into fastboot and flash again, but thats the problem. I cant get into fastboot. The usual combination (Power and vol+ and vol-) doesnt work! I tried many other combinations with different timings, longer press only vol+ and power ...., I always get to google logo after it vibrates.
Is there any other way to get into the fastboot mode ?
Can I connect it to the computer and interrupt the boot process when I switch it on via the PC?
thanks in advance
regards
Erich
Try to connect it to PC with original usb cable and run "adb devices".
If you see Nexus device, you can try "adb reboot recovery" and upload a ROM to /sdcard with "adb push" for flash it.
Hi
Thanks for your relpy.
But thats the problem, even if I could upload a file with adb, which is not working, how would I flash it if I cant get into fastboot or recovery mode ???
thanks anyway
regards
Erich
I think what patzzz is saying is that it depends on your bootloop, often is the case that when someone is in a bootloop the kernel does initiate and adb is functional. Not always but at times for sure.
So if so you can attempt
adb reboot recovery
Or
adb reboot bootloader
If the above doesn't work than you will have to continue trying to boot to bootloader manually with key presses (which I believe is power on while holding volume down)
Best of luck!
Hi
Thanks for the tip. Unfortunately it doesnt work. It made a batch file which calls adb devices and adb reboot bootloader in a loop, so it can send it to the device if it is found, but the tablet isnt regonized, tried some reboots and no luck, adb cant find it )))-:
regards
Erich
It seems a brick, but you can try using fastboot command instead of adb:
Code:
fastboot devices
fastboot reboot-bootloader
hundsmiachn said:
Hi
I rooted my nexus 10 some months ago. All worked fine until yesterday. I wanted to go back to original firmware and used the WUGs nexus root toolkit to download 4.4.3 version and flash it. But afterwards the tablet doesnt boot anymore. Google logo appears and then the circle thing never goes away. I searched many threads, and all base on going into fastboot and flash again, but thats the problem. I cant get into fastboot. The usual combination (Power and vol+ and vol-) doesnt work! I tried many other combinations with different timings, longer press only vol+ and power ...., I always get to google logo after it vibrates.
Is there any other way to get into the fastboot mode ?
Can I connect it to the computer and interrupt the boot process when I switch it on via the PC?
thanks in advance
regards
Erich
Click to expand...
Click to collapse
I suggest you do a factory reset from the stock. You have gone back to stock firmware so you should have stock recovery. I had this happen once and this work for me.
Hi
I will try it with fastboot too, maybe it works....
How can I do a factory reset without recovery mode ?
thanks
regards
Erich
hundsmiachn said:
Hi
I will try it with fastboot too, maybe it works....
How can I do a factory reset without recovery mode ?
thanks
regards
Erich
Click to expand...
Click to collapse
https://support.google.com/nexus/answer/4596836?hl=en
1.If your tablet is on, turn it off.
2.Press & hold the Power, Volume Up, and Volume Down buttons at the same time for several seconds. You'll see the word "Start" with an arrow drawn around it.
3.Press the Volume Down button twice to highlight Recovery mode.
4.Press the Power button to start Recovery mode. You'll see an image of an Android robot with a red exclamation point and the words "No command."
5.While holding down the Power button, press the Volume Up button.
6.Use the volume buttons to scroll to "Wipe data/factory reset," then press the Power button to select it.
7.Scroll down to "Yes - erase all user data," then press the Power button to select it.
>>2.Press & hold the Power, Volume Up, and Volume Down buttons at the same time for several seconds. You'll see the word "Start" with an arrow drawn around it.
Thats the problem, it doesnt work! Tried it a dozent times, only Google logo appears.....
regards
Erich
hundsmiachn said:
>>2.Press & hold the Power, Volume Up, and Volume Down buttons at the same time for several seconds. You'll see the word "Start" with an arrow drawn around it.
Thats the problem, it doesnt work! Tried it a dozent times, only Google logo appears.....
regards
Erich
Click to expand...
Click to collapse
Are your volume keys even working?
Sent from my Nexus 10 using Tapatalk
Delete
Hey guys,
I feel totally stupid for writing this post but I'm actually out of ideas how to get out of my situation. Also I didn't find any comparable topic here on xda. So let's hope you can help me and a big thanks in advance!
First of all i have a flashed D802 running TWRP and CM13, which worked well the last weeks. I thought about updating to the todays nightly as it is already a few weaks since I did my last update. I downloaded the nightly via the CM downloader and started the installation with running phone. It rebooted into recovery mode and installed the nightly without any problems. After the installation was completed the phone automatically rebooted and this is where the problem starts.
I am stuck in "bootloop?" at the CM logo. It is not automatically restarting after a while but just loading and loading and nothing further happens. I am not able to enter the recovery mode via the factory reset (Pressing Vol Down + Power, releasing after the lg logo appears, pressing and holding the power button again).
This never happened to me and as I am not able to enter TWRP I am not able to install a previous release or a backup. What am I doing wrong this time and what can I do?
Thanks for your support!
have you tried flashing a stock rom?
restlessone said:
have you tried flashing a stock rom?
Click to expand...
Click to collapse
Actually I don't really know how to do this when I'm not able to enter the recovery mode? Is there a certain way to do this?
In the meantime I managed to enter the recovery mode / TWRP via a mode I don't know how it is called. I pressed vol down + pw btn, released after the LG logo appeared and pressed vol up + vol down. I guess my userdata is deleted by now, which shouldn't be a big deal but I am getting redirected to the recovery mode. I tried to install the yet working CM13 nightly but it has the same problems now.
Now I have two questions:
Does anyone know which part of the system is broken now / which part I need to update in order to get my phone back to life?
Is the download mode working if my phone is rooted? I am able to enter this mode.
.flo. said:
Actually I don't really know how to do this when I'm not able to enter the recovery mode? Is there a certain way to do this?
In the meantime I managed to enter the recovery mode / TWRP via a mode I don't know how it is called. I pressed vol down + pw btn, released after the LG logo appeared and pressed vol up + vol down. I guess my userdata is deleted by now, which shouldn't be a big deal but I am getting redirected to the recovery mode. I tried to install the yet working CM13 nightly but it has the same problems now.
Now I have two questions:
Does anyone know which part of the system is broken now / which part I need to update in order to get my phone back to life?
Is the download mode working if my phone is rooted? I am able to enter this mode.
Click to expand...
Click to collapse
yes you can enter the download mode: turn down your phone, press and hold volume up button and connect the usb cable, release volume up when your screan shows dowload mode.
then follow this tutorial to restore your phone back to stock http://forum.xda-developers.com/showthread.php?t=2432476
restlessone said:
yes you can enter the download mode: turn down your phone, press and hold volume up button and connect the usb cable, release volume up when your screan shows dowload mode.
then follow this tutorial to restore your phone back to stock http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Thanks! At least the phone is working at all now.
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
pepeline said:
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
Click to expand...
Click to collapse
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
amageek said:
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
Click to expand...
Click to collapse
My phone restarts right at the logo when i press power vol up and vol down
pepeline said:
My phone restarts right at the logo when i press power vol up and vol down
Click to expand...
Click to collapse
Shut it down amd press those 3 keys combo.. upon seeing Huawei Logo and vibration, release the Power key while holding the other 2... That ought to do it
Man, your phone is badly bricked. If you don't have at least access to fastboot, then you're screwed.
Good for me to I have the same problem. I was trying to get to stock ( I have made it several times), but the last time was a fail... The whole process of sending firmware was ok. then a reboot and brick.
Now the huawei screen and the short vibration appears and shutdown.
I was trying everything.
In device manager the phone is displayed as mobile devices \ volume f:\ (drive letter)
in connected devices the phone is detected as
hi6210sft
Phone is not detected in fastboot or ADB.
I met this problem yesterday(I hope the identical ). Because I have two booting animations, one from Vodafone, I guess I shutdown early during installation. It just froze. Then it didn't boot and stock recovery didn't help
My solution needs some recovery software like twrp. Press three buttons at the same time until twrp mode. Copy zip file for SuperSU to phone or sdcard, then flash it. After that my phone works again.
You mentioned that you cannot start recovery. Try more. After installing twrp, starting it is quite annoying. Sometimes it just doesn't start or stock recovery starts. An alternative way is to go to whatever mode, and try adb or fast boot to reboot to recovery. Pressing button requires techniques which j don't have
I can't enter TWRP non combination is working for me. Installing firmware using dload from sd card also.
okay if non of these worked you can try flashing the whole update.app file by fastboot..
tools you will need
1- download the official huawei firmware from the official site
2- download Huawei Update Extractor
3- download minimal adb and fastboot
check the unbricking chapter of this thread
Note: to get in fastboot make sure you connected your phone to computer and press the vol down and power down buttons.. if none of these worked your phone is hard bricked .-. .. try opening the phone and reconnecting the battery worked with someone
if you need any help just pm me or replay on this thread hope that help you
Ok thx. I have already opened the phone to reconnect the battery
And then I was trying the combinations;
Battery connected vol- +power - Huawei logo and vibration and shutdown, no fastboot
Battery disconnected, vol-+power and connecting cable to phone - the same
Battery disconnected combination vol + vol - + ppwer, with sd card dload, the same
Battery connected combination vol + vol - power, sd card dload, the same
Any other suggestions?
The phone is recognized in Windows in device manager as mobile device as volume with a letter, I cant change the drivers to the right ones. I can't enter the storage it's unrecognized format.
Any other suggestions?
mercom said:
Any other suggestions?
Click to expand...
Click to collapse
it is easy to suggest others.. I too advised you.. but today i am facing the same problem...
what I tried:
Reinstalling the same ROM using dload method
Upgrading to other ROM (using both dload and flashing 4 image method)
Downgrading
Restoring from the backup
At one point, the phone booted up all well except the Wifi Module... So I flashed another ROM and stuck again...
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
yes, mine too... or I could say flashing succeeds but there's some problem with the boot partition... will get my phone today from the Customer Care and try again (if they can't repair).
you can try removing the back cover and unplugging the battery... that is one of the few things I will do today as I get my phone back..
mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
ok made it back.. just flashed the boot.img from b594 (the one I was using when my mobile got bricked)... somehow made it back. But now I am having a problem with the battery. It doesn't charge when the device is switched on, only when the device is switched off... will see for few days, if there's problem will take it back to service centre again
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
mercom said:
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
Click to expand...
Click to collapse
Switch off your device and then connect it to PC but just hold the volume- key.. that should get you in fastboot mode... I did that and then flashed the boot.img of the current ROM. This should boot it up...
Nope it doesn't work I was trying it already
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
roosta said:
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
Click to expand...
Click to collapse
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
LesterDMolester said:
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
Click to expand...
Click to collapse
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
roosta said:
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
Click to expand...
Click to collapse
Try downloading an older firmware extract the contents of the .app file using huawei firmware extractor and flash system.img recovery_ramdisk.img oeminfo.img product.img and vendor.img using fastboot and if the phone boots up just update it to a newer firmware, that's how i did it to my P10 Plus, it didn't wanna download via eRecovery too, sorry for the misunderstanding i forgot that it doesn't wanna download for you, i don't have the device with me now because i broke my display (again) so it's getting fixed but it won't be done untill saturday, i'll upload the firmware i used so that you can try too.
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
LesterDMolester said:
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
Click to expand...
Click to collapse
Thanks Lester I will try this when Ian home and let you know how I go...
roosta said:
Thanks Lester I will try this when Ian home and let you know how I go...
Click to expand...
Click to collapse
Dude pls wait don't try this i found another way, i bricked my phone accidentally today and i found a way, gonna take me some time to explain but i'll try my best.
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Hi Lester, it's been an eternity since I was online here as I put this on the back-burner with more pressing work and family priorities. Thank you very much for providing the files. I noticed the ROM firmware is EU, when i am outside of EU....but shouldn't be too big of a problem.... I am getting around to doing all of this now, I have downloaded the files. When are you typically online to chat about this?
RoOSTA
It cannot boot into TWRP, only the eRecovery. No option to flash anything on SD card, other than connecting to WIFI...
Hii roosta,
I might have some problem with you, let me facing your thread , I 'like to learn too how to make my P1o plus back to normal again, it's being long time for me to bring this up...
LesterDMolester said:
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Click to expand...
Click to collapse
I had try to download from ( https://androidhost.ru/29Qt ) ....but its need much time event with IDM ( 20hrs ) )