Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
That is modem firmware with all frequency bands enabled, yes? Are Motorola known to send outsome phones to retail without restricting them to regional bandings, or has someone inspected the binaries? ... Sorry for the noob question -- I'm just curious
No
rufflove said:
That is modem firmware with all frequency bands enabled, yes? Are Motorola known to send outsome phones to retail without restricting them to regional bandings, or has someone inspected the binaries? ... Sorry for the noob question -- I'm just curious
Click to expand...
Click to collapse
Different models (XT1063/64/68/69) are all locked with regional bands. XT1068 is for Middle East & Asia, while 63 is UK, 64 is US and 69 is Brazil.
But it possible to recover signal of a different region by flashing the appropriate Modem files for that region, i.e, on a XT1064, flashing the XT1068 Modem files will allow you to use the US fw in MEA.
Correct me if I'm wrong.
Can someone please tell me that for MFN.....we provide a single imei no. instead of 2 for xt1068 India?
Coz i have two Sims with different IMEI's
Yes
rahilsayed said:
Can someone please tell me that for MFN.....we provide a single imei no. instead of 2 for xt1068 India?
Coz i have two Sims with different IMEI's
Click to expand...
Click to collapse
They ask for only 1 IMEI. :good:
SOURCE: Cause I registered for the MFN and they asked to enter any one IMEI.
KrishnaSagar said:
Different models (XT1063/64/68/69) are all locked with regional bands. XT1068 is for Middle East & Asia, while 63 is UK, 64 is US and 69 is Brazil.
But it possible to recover signal of a different region by flashing the appropriate Modem files for that region, i.e, on a XT1064, flashing the XT1068 Modem files will allow you to use the US fw in MEA.
Correct me if I'm wrong.
Click to expand...
Click to collapse
Sure, the different model variants evidently have different bands enabled/disabled in firmware, but what is less clear is whether the modem firmware you posted is common to all retail XT1068 devices, regardless of the region/country in which they were sold.
NO
rufflove said:
Sure, the different model variants evidently have different bands enabled/disabled in firmware, but what is less clear is whether the modem firmware you posted is common to all retail XT1068 devices, regardless of the region/country in which they were sold.
Click to expand...
Click to collapse
XT1068 is also sold in Brazil which will have BR in the system version, these modem files are for the RETAILDSDSALL version only. Check your Settings->About page to identify your device.
Please delete! XT1068 has different firmware for Germany, India, Brazil and UK so flashing these files is bad of it does not match your firmware! People are posting stuff without realizing what they are doing! This is bad
Sent from my XT1069 using XDA Free mobile app
As I have mentioned in the Title of the post, this is for the RETAILDSDSALL version only.
KrishnaSagar said:
Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
Click to expand...
Click to collapse
I would like to have a complete stock for x1068
Please provde me the download link.
---------- Post added at 06:48 AM ---------- Previous post was at 06:24 AM ----------
KrishnaSagar said:
Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
Click to expand...
Click to collapse
Krishna,
I did same as what you menioned, I think I have the SIM 1 working now but SIM 2 still isn't working.
I had to use these commands
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
And solutions for this???
Same Problem
KrishnaSagar said:
Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
Click to expand...
Click to collapse
Hello,
and thanks for this forum.
I have the same problem. I have a Moto G (2nd Generation) which I flashed with Titan Prime ROM for my XT1068. Everything is cool but no network.
I hang on that forum that treats the same problem with XT1092. I downloades the ZIP file and followed the instructions. But I have the same errors like "System stopped..". And I realised that I don't have the same version. With some Google I downloaded the corresponding version with that forum . Thanks guys!!!!
But I see that when downloading we have 4.4.4 (KitKat). But anyway I used it. Now it detects my SIM, displays the network name for each SIM, but always "no service" like I am in airplane mode.
Helps guys!!!!
Require modem files for moto X (XT1052)
Hi KrishnaSagar,
Would these files work for Moto XT1052, I have accidentally deleted my IMEI (0). Any help would be appreciated. TIA.
Hy . i m using stock 5.0.2 but i my 1sim slot network always loss .. Can i flash this
Sent from my XT1068 using XDA Free mobile app
@KrishnaSagar
Tried, but still no network.
flashed Stock ROM 5.0.2 - still no network.
CM12.1 - still no network.
is there any special procedure to flash those Modem files? or anything for Kernel?
PS: Using XT 1068 - Indian. trying all those since 3 days.
Hi Krishna,
I am using Candyroms android version 5.1.1 itry to flash your modems files but no luck currently i am downloading stock rom Retaildsdsall_XT1068_5.0.2_LXB…y_Installer.zip . i am trying my luck but may be, i need your help i have MOTO G2 XT1068(INDIA). so please give me the link for modem files of this device. Thanks in advanced
Krishna i flash Retaildsdsall_XT1068_5.0.2_LXB…y_Installer.zip my phone networks are up but unable to start wifi in this stock wifi don't start please suggest
Anyone know the difference between the retca (Canadian) xt1064 and the retus (american) xt 1064?
I'm in Canada and bought retus unlocked from eBay. I tried flashing the retca modem files and lost radio. Both xt1064.
AFAIK, the same bands are used in both USA and Canada.
Sent from my Moto G 2014 using XDA Free mobile app
KrishnaSagar said:
Hey there,
I saw some users requesting for the Modem Files for XT1068 so here you go! If you accidently flashed the Modem files while updating to Lollipop using a different firmware, then these Modem Files will help you restore your Network signal.
The below zip file contains the modem files:
fsg.mbn
NON-HLOS.bin
If you already flashed the wrong modem files, just reboot to BootLoader and flash these files using the following commands:
Code:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe reboot
Download: https://drive.google.com/file/d/0B9m4R-49mhLuTWlLUGJtUVpjY1E/view?usp=sharing
Hit Thanks! if I helped and do let me know if you need any other files from the following firmwares (I have these firmwares on my Drive and can upload individual files if necessary):
XT1063
XT1064
XT1068
Click to expand...
Click to collapse
Hi... m not getting any signal in dim slot 1.. Itjust shows emergency call only-airtel.. I didnt use fastboot to flash any modem files.. I can still use sim slot 2..but cant use 3g...if i use dese files i will be able to use sim slot 1..have indian version x68..plz reply.. I can use dis on cm12??
xt1068 is all same hardware the only difference is this regional version of software, for indian stock (global retail dsds) use jan 6th or feb 25th version in my 5.0.2 signature - this will restore stock
Is this zip twrp flashable...???
---------- Post added at 09:46 AM ---------- Previous post was at 09:41 AM ----------
I tried flashing them in fastboot mode after installing cm12.1 worked like charm......☺ both sims are working fine
xt1068 lost IMEI number,Base Band Number, network after Marshmallow update recentrly
I recently updated the Marshmallow 6.0 update and after that everything one xt1068 stopped working except Bluetooth. After that I tried lot of things like factory reset, cache format but nothing changed. Then I searched the forum and unlocked the boot loader and tried flashing kitkat to marshmallow again but with no output. My base band version is unknown my Imei number is null and my wifi is also not working. Please advise me if this is a hardware problem or is there any solution to this. I shall be obliged if somebody gives me step by step genuine solution.
PS. I sent it for moto g service dealer and after hearing the problem and handling my phone he said its a motherboard problem. Same problem happened to my friends Nokia windows phone last month and his problem was solved flashing the software..
Is it possible to root DQB2 with CF-ROOT DPD3? CF-Auto-Root homepage, dont have DQB2, only MMB29M.G900W8VLU1DPD3.
My Bluetooth dont work on custRom Nougat and try update for fix this problem.
Thanks.
Modem and Bootloader G900W8VLU1DQB2 work with ROM 7.1.2_r2★★VanirAOSP+Commotio★★(06/04/17)
So, Niisan, My Car Bluetooth, no compatible with Nougat for me.
Thanks degener8
Download the full stock firmware file
Extract the .tar.md5 file (I am using 7zip for all extraction/compression as it supports all formats)
Open the .tar.md5 in 7zip
For modem: grab "modem.bin"
For bootloader: grab the following
aboot.mbn
rpm.mbn
sbl1.mbn
sdi.mbn
tz.mbn
Compress the file (or files) with 7zip using TAR compression (leave all settings alone, "store" compression level is what i used)
take the resulting tar file and flash using ODIN (BL for bootloader; CP for modem)
by degener8; 31st December 2016 at 10:28 AM. Reason: Added steps to reproduce.
i tried
fastboot flash modem non-hlos.bin
but there isnt a file by that name in the potter_NPN25.137-83.zip firmware.
should i grab another firmware or try something else?
Hmm, the firmwares should have that file included in them.
Have you extracted the stock ROM from the zip (should be about 2 GB) and copied it to the same folder as your ADB terminal?
You may wish to double check the filename case and if the file name is capitalised or not (e.g. non-hlos.bin may not be the same as NON-HLOS.bin in the file system).
Generally, if you wish to flash just the modem, provided you have all the files in your ADB directory, use the following commands:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Ensure you're flashing the correct firmware/modem for your device - incorrect firmware/modems can cause you to lose network access/IMEIs.