[KERNEL][LP][3.10.84] LG OPTIMUS G3 STYLUS [MT6582] Phoenix V2 - Android Software Development

Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
The kernel is based off latest sources from "LGE OPEN SOURCE" and is compatible with D693 and D693n
ThunderSonic Sound Control Engine (credits to varunchitre)
Dynamic Fsync Control (credits to faux123)
EXFAT SUPPORT
FRANDOM SUPPORT
Disabled Gentle fair sleepers
Enabled arch power
block: Added SIO IOScheduler
block: Add BFQ IOScheduler
block: Add fiops scheduler
fs: added Samsung's F2FS support
Disabled CRC check in MMC for 30% extra performance with IO
cpufreq: ThunderX power saving CPU governor (credits to varunchitre)
cpufreq: Alucard
DOWNLOAD
Version 1
Version 2
INSTRUCTIONS
- Just flash the zip you want in recovery and you are good to go!
XDA:DevDB Information
[KERNEL][LP][3.10.84] LG OPTIMUS G3 STYLUS [MT6582] Phoenix V1, Kernel for all devices (see above for details)
Contributors
chijure, varun.chitre15, faux123, getakgt1
Source Code: https://github.com/chijure/android_kernel_lge_MT6582-common
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 01
Stable Release Date: 2016-11-16
Created 2016-11-17
Last Updated 2016-12-03

Changelog
Phoenix V1
Code:
- Initial Release
Phoenix V2
Code:
-Add EXFAT SUPPORT
-Add OTG SUPPORT
-Add FIOPS SCHEDULER
-Add SIO SCHEDULER
-Add ALUCARD GOVERNOR
-Add FRANDOM
-Disable crc check for 30% extra performance
-NOATIME and NODIRATIME by default
-Disabled GFS and enabled ARCH_POWER

reserved 2

are you sure otg support is added? i tested it and didn't worked, does it need some mod on the rom?

gkillershots said:
are you sure otg support is added? i tested it and didn't worked, does it need some mod on the rom?
Click to expand...
Click to collapse
Sorry but the otg support didn't work

Chijure, could you compile 3.10 kernel to an Alcatel Device (MT6572 KK) We have kernel sources. We'd appreciate all your help!
Thanks in advance!

@chijure is this built for stock official lollipop rom ?

eternal70 said:
@chijure is this built for stock official lollipop rom ?
Click to expand...
Click to collapse
yes lollipop roms or ports roms lollipop

imlatindev_Faustino said:
Chijure, could you compile 3.10 kernel to an Alcatel Device (MT6572 KK) We have kernel sources. We'd appreciate all your help!
Thanks in advance!
Click to expand...
Click to collapse
thank you

chijure said:
Changelog
Phoenix V1
Phoenix V2
Click to expand...
Click to collapse
:good: Great!

Can you build a new version with latest commits?

Herkese selam. Bu çekirdek çok güzel ama magisk yüklemiyor. Lütfen yardım ediniz..

Related

[KERNEL] StellAR Kernel for MI3/MI4 [UBER 6.0][Lollipop/MIUI/Ivan AOSP]

Code:
/*
* [URL="http://www.digit.in/mobile-phones/bought-a-xiaomi-phone-root-it-doesnt-void-the-warranty-25001.html"]Your warranty is not void. -Xiaomi[/URL]
*
* But still,
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
:highfive:
Hello people, I present you a custom kernel for our beloved device from MI3 :victory:
Should Work on most roms out there
Currently Miui is not supported for a while
BATTERY LIFE:-
See this post
FEATURES:-
-Compiled with latest Uber Toolchain 6.0
-Intelliplug
-KEXEC
-DT2W
-Add LCD KCAL control driver (see extras)
-Governers :- smartassH3, elementalx, abyssplugv2, wheatley, lionheart
-Scheduler:- bfq, sio, fiops, zen, vr & defaults
-Linux version 3.4.110
-MemUtils
-Voltage Control
-Faux Sound
-PM Powersuspend
-exfat support, CIFS fix
-Use phone as keyboard/mouse
-TCP Congestion:- westwood, reno, bic, cubis, highspeed, hybla, etc...
For rest see my commits
Installation:-
Put the zip file in the memory
Reboot to recovery
Wipe cache and dalvik cache
Reboot system
To recover back to stock, just flash back the original ROM, Recovery backup wont work as the system/lib/modules have been changed
BUGS:- You tell, i fix . Some features are untested because i dont use them so do report if anything is not working
BETA:- the beta version can be found in the downloads folder, changelog will be in the github commits
Downloads:- Version:- ShInAgAmI (Death God) V5.2
I Kindly request to not mirror my links, if they dont work i will try to upload to other sites
Google Drive
Updates:-
Code:
[B]V5.2 ShInAgAmI (Death God)[/B][HIDE]
[B]Tonnes of fixes and ports[/B] [U](see commits)[/U][/HIDE]
[B]V4 Khukhakh[/B][HIDE]
[LIST=1]
[*]ReBase from stuxnet kernel
[*]pm powersuspend ; exfat support ; use phone as keyboard/mouse
[*]GCC 6.0, etc, etc...
[/LIST][/HIDE]
[B]V3 Sora Shiro[/B][HIDE]
[LIST=1]
[*]Clean and restart from the very beginning
[*]Used Temasek branch from kernel-hut to build, so should increase the compability
[*]GCC 5.1
[/LIST][/HIDE]
[B]V2-r9 KiSeKi[/B][HIDE]
[LIST=1]
[*]Removed smartassV2, Added wheatley
[*]Added fRandom
[*]Re-Commited memutils
[/LIST][/HIDE]
[B]V2 KiSeKi[/B][HIDE]
[LIST=1]
[*]Added New Schhedulers zen, sio, fiops, vr
[*]Added LCD KCAL driver
[/LIST][/HIDE]
[B]V1-r5 AkAtSuKi[/B][HIDE]
[LIST=1]
[*]Reduced wlan.ko size
[*]enabled faux sound and fast charge
[/LIST][/HIDE]
Future features planned:-
pcm or smartwax governor
Some additional touch modifications
Better OC (not in current versions)
Gpu oc from tarun
remove compile warnings and kmesg errors
aaand improve get a better pc (within 2 months)
Credits:- (All hail to these gods!!)
@faux123 - For so many Damn things!!
@DooMLoRD - For his msm8974ab tree
@Bitti09 & @audahadi - The kernel fixes & tweaks and their device tree with fixes
@Gnome - Voltage Control, BFQv7r7, stuxnet kernel
@savoca & @neobuddy89 - LCD KCAL driver, and a lot of stuff (currently for d2w code imports too)
and all the other devs for their commits, and xiaomi for the opensource kernel promise (unbuildable source though)
@vasishath for miui support, dt2w and anykernel2 fixes
@Tarun93 for helping me with oc and other stuff
Extras:-
To use most of the features use Kernel Adiutor (Best app out there)
To use only the LCD KCAL control use this Color Control App by savoca
Also Trickster MOD works fine
Latest updated Kernel Source:- https://github.com/deeplyarnab/android_kernel_xiaomi_cancro/
​
XDA:DevDB Information
StellAR Kernel for MI3/MI4, Kernel for the Xiaomi Mi 3
Contributors
arnabbiswasalsodeep, Gnome, vasishath
Source Code: https://github.com/deeplyarnab/android_kernel_xiaomi_cancro
Kernel Special Features: LCD KCAL, ADRENO IDLER, DT2W, KEXEC
Version Information
Status: Beta
Current Stable Version: 6.5#
Stable Release Date: 2016-04-22
Current Beta Version: april_last
Beta Release Date: 2016-05-05
Created 2015-06-01
Last Updated 2016-05-06
ExtrAAAss
To use most of the features use Kernel Adiutor (Best app out there)
To use only the LCD KCAL control use this Color Control App by savoca
Also Trickster MOD works fine
Kernel Source:- https://github.com/arnabbiswasalsodeep/android_kernel_xiaomi_cancro/
An excellent guide about the Governors, hotplugs, etc:-
Android Cpu governors explained
wooow..so many kernel today ! Great work sir, hope for many new update ..It works on all roms or ? thanks :good::good:
Good job!
In a while I'll try it
Good job.
Download and testing now!
i have only tried this on cm12.1
try on others and report if you have any problem
also report any bugs you face (a pm too will be nice since it will be nice as)
arnabbiswasalsodeep said:
i have only tried this on cm12.1
try on others and report if you have any problem
also report any bugs you face (a pm too will be nice since it will be nice as)
Click to expand...
Click to collapse
confirm that works CM12.1.. with wich apps can we adjust all of this settings ? syanpse works ?
CM12.1 by Bitti09
Confirmed. Kernel boots and works on cm12.1 by Bitti09!
Sagar.Shwrmni said:
Kernel Adiutor Link
Click to expand...
Click to collapse
yeah, using it right now..but synapse have so much option
I used kernel adiutor, and trickster mod
Faux sound was ported from @alexret kernel so still now testes it (trusting him)
@arnabbiswasalsodeep AH, finally the cat is out of the bag! :laugh:
Sorry that I couldn't test it for you cuz my phone wasn't here. :crying:
Sagar.Shwrmni said:
Kernel Adiutor Link
Click to expand...
Click to collapse
You just might be the first person I've seen who spelt it correctly.
(See the first of the FAQs in the app )
Will it work on LP 5.0.2. I'm using BP 2.3 and was wondering if it would work...
no sound control in synapse :-/
morpheus620 said:
no sound control in synapse :-/
Click to expand...
Click to collapse
I havent tested synapse yet
And i ported faux audio from alexret's kernel, cant test it cuz i havent bought the app
Also fast charge is disabled for now
Will enable it soon (maybe in 2 days)
arnabbiswasalsodeep said:
I havent tested synapse yet
And i ported faux audio from alexret's kernel, cant test it cuz i havent bought the app
Also fast charge is disabled for now
Will enable it soon (maybe in 2 days)
Click to expand...
Click to collapse
synapse don't work for now..because no UCI support
synapse worked. flash the ukm script.
and smartassv2 runs at the highest frequency. it can be used no other.
morpheus620 said:
synapse worked. flash the ukm script.
and smartassv2 runs at the highest frequency. it can be used no other.
Click to expand...
Click to collapse
but with ukm script and synapse ,network signal disappear
The problem is not with me.
Wifi not working in Mokee latest nightly....!!!
Any solution???
kevalthakkar said:
Wifi not working in Mokee latest nightly....!!!
Any solution???
Click to expand...
Click to collapse
seems to be working fine for me....is your wifi not turning on?

[KERNEL][N/O] Clarity [DT2W/S2W][v4.1][Treble/Non-Treble]

DISCLAIMER
Code:
[B][SIZE="3"]Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Please read completely this thread before using for minimize FAQ.
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
[/SIZE][/B]
Requirements
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlock Bootloader as well
atleast on Firmware v27, check here
Latest TWRP
No need Wipe dalvik/art cache
Features
On version 4.1
Using Official XIAOMI Patch.
Support MIUI/AOSP (Nougat/Oreo)
Kernel based on CAF "LA.UM.6.6.r1-09000-89xx.0" (Oreo)
Kernel based on CAF LA.UM.6.6.r1-06300-89xx.0 (MIUI/AOSP N)
Wlan prima CAF "LA.UM.6.6.r1-09000-89xx.0" (Oreo)
Wlan prima CAF LA.UM.5.6.r1-07900-89xx.0 (MIUI/AOSP N)
Video En/Decode CAF LA.UM.5.6.r1-06900-89xx.0 (MIUI/AOSP N)
Camera Stack CAF LA.UM.5.6.r1-06300-89xx.0 (MIUI/AOSP N)
IPA Tethering CAF LA.UM.5.6.r1-06900-89xx.0 (MIUI)
Compiled with AOSP Toolchain 4.9.
support Doubletap2Wake / Sweep2Wake Gesture.
KCAL colour control & Backlight Dimmer
Xiaomi Color & Contrast patch (Needed by MIUI).
Unlock GPU clock from 475MHz to 500MHz.
added latest alucard, nightmare, darkness, clarity, blue active cpu Governors.
added Usb force fastcharge (Disabled by default | Please read Disclaimer again)
added BFQ-v8r12, Fiops, Maple, Zen, SIO i/o scheduler (CFQ as Default).
set default compression zram to Lz4.
Support and updated F2FS Filesystem (AOSP)
added custom hotplug AutoSMP and AIO (default core control by CAF)
added ExFat and NTFS Filesystem support
added sound control
added dts eagle sound integration
added boeffla wakelock blocker
added TTL target Support
More
Telegram Channel for Beta version
https://t.me/claritykernel
FAQ & Changelogs
FAQ
CHANGELOGS
Little Story
Now using official Xiaomi Patch for Redmi 4X
this kernel is nothing without Noyer, first many thanks and credits goes to him and this is his source : msm-3.18
My source is little different with Noyer source, while i'm using CAF tag release.
but this kernel can't be done without Noyer commits in git, i'm still learn to make this kernel more stable with a lots of features.​
Bugs ?
Nothing.
Report with dmesg and last_kmsg if founded.
Credits
(Not in order)
Eduardo Noyer a.k.a bitrvmpd
silent27121984 | Nikit | Nik001 (All dev bring Oreo Rom)
Savoca | Francisco Franco | Alucard24 | Showp1984 | SultanXDA
Nichream | TheScarastic | Flar2 | Nathanchance | Andip71 | Msf-jarvis
joshuous | LazerL0rd | LuanHalaiko | LuizPauloDamaceno | mostafa-z
All authors and commiters on Source
Tell me if i miss someone else
How to enable dt2w/s2w
Download Kernel Adiutor at Playstore.
Open Kernel Adiutor (KA).
KA > Wake > doubletap2wake : Full/Half
KA > Wake > sweep2wake : Sweep2wake + Sweep2sleep
sweep2sleep not working
How to costumize/enhance AutoSMP hotplug (04042018)
Check Here > https://forum.xda-developers.com/showpost.php?p=76082937&postcount=1116
Donations
i spend some hours to build this kernel. if you like my work you can buy me a coffee :laugh:
Donate Me || OR || Donate Noyer (bitrvmpd)​
Downloads
Google Drive
If you having issue on tethering or wifi on Nougat/Miui roms, check this
XDA:DevDB Information
Clarity, Kernel for the Xiaomi Redmi 4X
Contributors
rainforce279, b1tRvmpd
Source Code: https://github.com/ryan-andri/android_kernel_santoni
Kernel Special Features: as mentioned on features.
Version Information
Status: Stable
Current Stable Version: 4.1
Stable Release Date: 2018-07-23
Created 2017-12-14
Last Updated 2018-07-23
How to report bugs & F.A.Q
How to report bugs
For easy steps to report bugs.
You should report bugs with format:
Rom information
Android version
Version of this kernel
Any setting that you have done after flash this kernel
log: logcat and dmesg if you encounter drivers problem.
log: last_kmsg if you encounter random reboot.
Take logs with Kernel Adiutor (KA):
Download Kernel Adiutor (KA) on Playstore!
Open KA > Settings > search: "Debugging section" > click on dmesg/last_kmsg/dmesg. Then open any file manager locate to storage/emulated/0 or internal storage, the file logs formated with .txt then send it to this thread or PM me.
Reporting bugs with properly way, you not only help me but you help your self too. If any reports bugs or problem without this preference, i'll ignore it!
Frequently asked questions (FAQ)
Q : My touchscreen is not work after flashing this kernel, what should i do ?
A : Go to this thread Firmware and flash v27 firmware, your touchscreen will work again.
Q : This is will work for MIUI rom ?
A : works fine now.
Q : Can you add x or y features ?
A : i'll accept all usefull feature. i think enough for now.
Q : Wifi not work after restore stock boot.img, what should i do ?
A : after restore stock kernel or boot.img and wifi doesn't work you can open any file manager and locate to system/lib/modules and remove wlan.ko then locate to system/lib/modules/pronto copy pronto_wlan.ko into system/lib/modules and rename it as wlan.ko then set permission to 0644, your wifi will work again. (In case for MIUI)!
Changelogs
Changelogs AOSP 8.1 or AOSP 8.1 Treble
Code:
[COLOR="Red"]v4.1[/COLOR]
For detail logs, check source on branch "Oreo" Please.
- Disable kernel debugs
- Improve for disabled tracer (less debugs)
- enable specific config to improve zram performance
- simplify checking thermal state for custom hotplug
- add bootinfo from riva-n-oss
- decreased bcl (battery current limit) threshold to 5%
Changelogs MIUI 9/10
Code:
[COLOR="Red"]v4.1[/COLOR]
For detail logs, check source on branch "Nougat/MIUI" Please.
- Improve for disabled tracer (less debugs)
- enable specific config to improve zram performance
- simplify checking thermal state for custom hotplug
- add bootinfo from riva-n-oss
- lots caf commits for improve stabilty
- decreased bcl (battery current limit) threshold to 5%
- upstream ipa tethering from latest CAF
Changelogs AOSP 7.1
Code:
[COLOR="Red"]v4.1[/COLOR]
For detail logs, check source on branch "Nougat/AOSP" Please.
- Improve for disabled tracer (less debugs)
- enable specific config to improve zram performance
- simplify checking thermal state for custom hotplug
- add bootinfo from riva-n-oss
- lots caf commits for improve stabilty
- decreased bcl (battery current limit) threshold to 5%
Thanks for sharing.
link please..
rainforce279 said:
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
==================================================
Please read completely this thread before using for minimize FAQ
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
Requirement
Unlock Bootloader as well
Latest TWRP
atleast on AOSP Based ROM (LOS, AEX, RR, etc).
No need Wipe dalvik/art cache
Features
Based on CAF TAG "LA.UM.5.6.r1-06400-89xx.0"
Upstream to Linux 3.18.87
Compiled with Linaro Toolchain 4.9.4
Compiled with -O2 Flag.
Wlan Prima based on CAF TAG "LA.UM.5.6.r1-06400-89xx.0"
KCAL colour control.
added Zen, BFQ i/o scheduler (BFQ as Default).
enabled "BFQ hierarchical scheduling support"
Customeable MSM Thermal.
Added Boeffla Wakelock blocker.
optimized crypto crc32 for arm64
Set default compression zram to Lz4.
many more.
Status
This kernel is very high experimental due the source is from ported.
Boot = OK.
Sound, speaker, earphone, mic = OK.
Camera [front/back] = OK.
Fingerprint =OK.
Touchscreen = OK.
IR Blast = Not testing yet.
WIFI = OK.
RIL = OK.
Radio = OK.
BUGS ?
So far, i'm never facing any problem.
tell me if you found it.
CREDITS ?
Eduardo Noyer a.k.a bitrvmpd
Nicecream
TheScarastic
XDA:DevDB Information
Clarity, Kernel for the Xiaomi Redmi 4X
Contributors
rainforce279
Source Code:https://github.com/ryan-andri/android_kernel_santoni
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-12-15
Created 2017-12-14
Last Updated 2017-12-14
Click to expand...
Click to collapse
where is the link
Good work (Y)
Sent from my Redmi 4X using Tapatalk
You are good man!
Diantos om
Sent from my Redmi 4X using Tapatalk
Report sir.
Touch screen and finger print did not work after flash this kernel.
Tested On Aosp Extend 4.6.
Any solution?
Randyshare said:
Report sir.
Touch screen and finger print did not work after flash this kernel.
Tested On Aosp Extend 4.6.
Any solution?
Click to expand...
Click to collapse
try flash firmware v27
rainforce279 said:
try flash firmware v27
Click to expand...
Click to collapse
OK sir.
Downloading fw 27 .
BTW, is this kernel have a fast charger feature?
IR working and all working fine here
:good:
Sent from my Redmi 4X using Tapatalk
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Add fast charge and Alucard if possible please
Sent from my Redmi 4X using Tapatalk
Yousef Algadri said:
IR working and all working fine here
:good:
Sent from my Redmi 4X using Tapatalk
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Add fast charge and Alucard if possible please
Sent from my Redmi 4X using Tapatalk
Click to expand...
Click to collapse
Nice hear that, thanks man.
Salam kenal dari palembang om
@rainforce279 come join in telegram group @redmi4official
After flash FW 027, Touchscreen work.
But now , fingerprint was broken.
Also missing this option in setting.
Pls help..
Here is it..
Randyshare said:
After flash FW 027, Touchscreen work.
But now , fingerprint was broken.
Also missing this option in setting.
Pls help..
Click to expand...
Click to collapse
what your rom now, try reboot your device
i never facing this problem so far.
rainforce279 said:
what your rom now, try reboot your device
i never facing this problem so far.
Click to expand...
Click to collapse
I'm on Aosp extend 4.6 sir.
OK, I will try restart.
.............
Done.
It does not help sir.
.....
Charging indicator isn't work on status bar.
Pls fix.
.....
Nice work btw
I'm on dot os 1.1 and wifi, fingerprint isnt working here. Tried rebooting device but still no success.
rainforce279 said:
Nice hear that, thanks man.
Salam kenal dari palembang om
Click to expand...
Click to collapse
Salam kenal dari Jakarta juga [emoji85]
Sent from my Redmi 4X using Tapatalk
rainforce279 said:
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
==================================================
Please read completely this thread before using for minimize FAQ
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
Requirement
Unlock Bootloader as well
atleast on Firmware v27, check here
Latest TWRP
atleast on AOSP Based ROM (LOS, AEX, RR, etc).
No need Wipe dalvik/art cache
Features
Based on CAF TAG "LA.UM.5.6.r1-06400-89xx.0"
Upstream to Linux 3.18.87
Using Reversed dtb from Stable MIUI 9.1.1.0.
Compiled with Linaro Toolchain 4.9.4
Compiled with -O2 Flag.
Wlan Prima based on CAF TAG "LA.UM.5.6.r1-06400-89xx.0"
KCAL colour control.
added Zen, BFQ i/o scheduler (BFQ as Default).
enabled "BFQ hierarchical scheduling support"
Customeable MSM Thermal.
Added Boeffla Wakelock blocker.
optimized crypto crc32 for arm64
Set default compression zram to Lz4.
many more.
Status
This kernel is very high experimental due the source is from ported.
This kernel tested on (Official RR, AEX, Citrus-CAF).
Boot = OK.
Sound, speaker, earphone, mic = OK.
Camera [front/back] = OK.
Fingerprint =OK.
Touchscreen = OK.
IR Blast = "User report" OK.
WIFI = OK.
RIL = OK.
Radio = OK.
BUGS ?
So far, i'm never facing any problem.
tell me if you found it.
Little Story
this kernel is nothing without Noyer, first many thanks and credits goes to him and this is his source : msm-3.18
My source is little different with Noyer source, while i'm using CAF tag release and manual upstream to Kernel.org.
but this kernel can't be done without Noyer commits in git, i'm still learn to make this kernel more stable with a lots of features.
CREDITS
(Not in order)
Eduardo Noyer a.k.a bitrvmpd
Savoca
Francisco Franko
Nicecream
TheScarastic
Tell me if i miss someone else.
Download
XDA-DOWNLOAD
XDA:DevDB Information
Clarity, Kernel for the Xiaomi Redmi 4X
Contributors
rainforce279, bitrvmpd
Source Code:https://github.com/ryan-andri/android_kernel_santoni
Kernel Special Features: KCAL, Wakelock Blocker.
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-12-15
Created 2017-12-14
Last Updated 2017-12-14
Click to expand...
Click to collapse
Thanks man! in my lineage os 14.1 work perfectly!

[Kernel][MIUI] AFTERSHOCK (Santoni)[March 9]

/* WARNING*/
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know the basic procedures of flashing/modding/unbricking your device please stay with stock MIUI.
/*Features*/
* Built using official sources
* Synced with stable Linux-3.18
* Wake gestures: doubletap2wake & sweep2wake
* Sweep2sleep
* Bfq I/O scheduler
* Underclocked both clusters to 400MHz
* Custom userspace voltage control
* Sound control: headphone digital gain & mic gain
* ChaCha20 based CRNG backport from Linux-4.9
* Sdcardfs synced with AOSP-3.18
* EXT4 FS synced with AOSP-3.18
* arm64/crypto backports from mainline Linux
/*Installation*/
* Make sure you are on stock MIUI kernel before flashing
* Flash kernel zip with twrp. No need to wipe anything.
/*DOWNLOAD*/
https://drive.google.com/folderview?id=1SClj6ZWSkVBLWHYFvwdKpH-eZ0r7yC95
/*FAQ*/
*Will you add tons of those cool sounding custom governors/schedulers?
- No. Interactive & bfq ftw.
* Will it work on custom roms?
- It might work but expect things to be broken
* Will you add custom rom support in future?
- I'm a hardcore MIUIer. So no.
* Will you add overclocking?
- I've already unlocked the max available frequencies from caf i.e big - 1.49GHz/little - 1.2GHz. Beyond this I believe it's completely useless on modern chipsets.
* Will you add QC 2/3/4/5/6....∞ support?
- No
* How power efficient is your kernel?
- Just don't expect the battery life of an inverter.
XDA:DevDB Information
Aftershock, Kernel for the Xiaomi Redmi 4X
Contributors
Ashish94
Source Code: https://github.com/AshishM94/Santoni
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: Rc1
Beta Release Date: 2018-03-09
Created 2018-03-09
Last Updated 2018-03-09

[Kernel][MIUI] AFTERSHOCK (Santoni)[March 9]

/* WARNING*/
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know the basic procedures of flashing/modding/unbricking your device please stay with stock MIUI.
/*Features*/
* Built using official sources
* Synced with stable Linux-3.18
* Wake gestures: doubletap2wake & sweep2wake
* Sweep2sleep
* Bfq I/O scheduler
* Underclocked both clusters to 400MHz
* Custom userspace voltage control
* Sound control: headphone digital gain & mic gain
* ChaCha20 based CRNG backport from Linux-4.9
* Sdcardfs synced with AOSP-3.18
* EXT4 FS synced with AOSP-3.18
* arm64/crypto backports from mainline Linux
/*Installation*/
* Make sure you are on stock MIUI kernel before flashing
* Flash kernel zip with twrp. No need to wipe anything.
/*DOWNLOAD*/
https://drive.google.com/folderview?id=1SClj6ZWSkVBLWHYFvwdKpH-eZ0r7yC95
/*FAQ*/
*Will you add tons of those cool sounding custom governors/schedulers?
- No. Interactive & bfq ftw.
* Will it work on custom roms?
- It might work but expect things to be broken
* Will you add custom rom support in future?
- I'm a hardcore MIUIer. So no.
* Will you add overclocking?
- I've already unlocked the max available frequencies from caf i.e big - 1.49GHz/little - 1.2GHz. Beyond this I believe it's completely useless on modern chipsets.
* Will you add QC 2/3/4/5/6....∞ support?
- No
* How power efficient is your kernel?
- Just don't expect the battery life of an inverter.
XDA:DevDB Information
Aftershock, Kernel for the Xiaomi Redmi 4X
Contributors
Ashish94
Source Code: https://github.com/AshishM94/Santoni
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: Rc1
Beta Release Date: 2018-03-09
Created 2018-03-09
Last Updated 2018-03-09

[Kernel][Q-only][4.9.y]Unitrix Kernel

Code:
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Unitrix Kernel for VINCE​
Designed to provide a good balance between battery life and perfomance providing( I prefer performance over battery)
the only needed and useful features, so just flash and forget. Also it will include upstreaming to latest android linux stable
for security and stability as well as CAF patches.
This was just my hobby at start but now I think this can be open to other users as well so I can know how it is( what bugs there are, if any) and get different view points . I'm most active on telegram so you can contact me with anything related to bugs or features just let me know on telegram click here :laugh: .
Features:
Rebased over android linux stable branch r27
Implement USB Fast Charge
Enable Kcal Control
Add Vibration Control Settings
Increase modem temp trip limit
Enable Advanced TCP Congestion
Default Westwood TCP Congestion
Fix broken network indicator
Add wakelock blocker
Implement and Enable Adreno Idler
Disable Auditing and logging
Implement Pixel_Smurfutil CPU governor
Implement Maple I/O Scheduler
Enable LZO Compression for zram
Sound control
System Wide PowerEfficient workqueue
Installation instructions :
- Make sure you have a custom recovery like Orangefox (how do you not have one already?)
- Reboot to recovery
- Backup from current kernel (Boot Partition)( incase you don't like unitrix )
- Install the kernel zip file without wiping any partitions
- Reboot back to system
- Enjoy!
Changelogs:
v1.0
Initial release
Listed Features (more coming soon)
Go Stable
Downloads :
- Github Release
Want to keep up with the updates ?
Follow here : Unitrix Kernel Channel
Big Thanks To/Credits :
- @Ruturaj Kadam because without him I wouldn't have done anything
- @blacksuan19 for teaching me the basics and for his script that make compilation ez
- @lau for guiding me how to do stuff
- @KenHV for support & un-noob-ifying me
- @RajKale99 helps me whenever approached
- @iamsaalim for teaching how to rebase :good:
- @ender1324 for nothing lmao
- @rama982 for his initial base on which I tested stuff
- ALL people who I've cherry-picked stuff from on my git coz they are the real pros
- Also a little thanks to my tester( @AkosPaha), and a few more people whom I've asked most silly questions
XDA:DevDB Information
Unitrix, Kernel for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
Starlight5234, blacksuan19, laststandrighthere, RajKale99
Source Code: https://github.com/starlight5234/android_kernel_vince_unitrix
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2020-05-23
Created 2020-05-22
Last Updated 2020-05-22
good stuff, dev star
Stable Release v2.0
Latest Stable Kernel Tag v4.9.225
Comes with Overclocked and Non-Overclocked Version
1. Enable BBR TCP congestion [ Not Default ]
2. Add Speaker Gain control
3. Improve Maple I/O Sched
4. Import Wireguard
5. Disable Readaheads for improved performance and energy consumption
Download link for v2.0 : Overclocked ------- NonOverclocked
Beta Release v2.0 :-
Download :
Here
Changelogs:
Rebased over 'LA.UM.8.6.2.r1-07800-89xx.0'
Upstream to 4.9.231
Fix internal error message on boot
TCP backports ( thanks to @iamsaalim )
Fix Gcam slow motion
Drop core ctl
Enable vdso32
Idle drain tweaks, fixed now
ExFAT support ( sdcard shouldn't brick anymore ?)
Remove some debugging
Remove adreno idler
Nuke some wakelocks
Readahead back to 1024kb ( borked bootanimation when disabled)
Under the hood optimizations lol
Overclocked to 2.2Ghz CPU and 725 GPU
Note:
Submit bugs here: https://t.me/unitrix_kernel
Peru in da house
blacksuan19 said:
Peru in da house
Click to expand...
Click to collapse
You real pru, we know
BRUH
pero, good projects
PahaÁkos said:
pero, good projects
Click to expand...
Click to collapse
NoU Pro Tester
Good karnul I recommend
dis karnul veri gud sar
Congratulations sur...good kernel
with this kernel i can hear small ultrasound noise from inside of my vince especially when the screen is on. O_O
Bart_00 said:
Good karnul I recommend
Click to expand...
Click to collapse
:highfive:
SneakyPassenger said:
with this kernel i can hear small ultrasound noise from inside of my vince especially when the screen is on. O_O
Click to expand...
Click to collapse
Flash Latest FW.
PS: I don't hear any
Ruturaj Kadam said:
dis karnul veri gud sar
Click to expand...
Click to collapse
:silly:
mahmoud ayman said:
Congratulations sur...good kernel
Click to expand...
Click to collapse
Best wishes from me bhawa
Nice Krnel! Im loving the cosmic era! lol
in fact, it solved the problem of crazy focus on the gcam (hypercam) that I had last version of the pixel exp.
Starlight5234 said:
NoU Pro Tester
Click to expand...
Click to collapse
No u xd
SneakyPassenger said:
with this kernel i can hear small ultrasound noise from inside of my vince especially when the screen is on. O_O
Click to expand...
Click to collapse
Me too, I can hear that sound and I have latest firmware
Ah ****, here we go again

Categories

Resources