Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
what is the latest firmware update for Huawei y300
what is the latest firmware update for Huawei y300? i have the software versio V100R001C151B165 is this the latest update?
please update
i backed up my imei but deleted the folder i try to backup again and it says its already backed up ??
How to restore Imei
I didn't understood woht ot restore my imei. Could you explain it completely?
HUAWEII Y300-0000 question
Hi,
I have HUAWEII Y300-0000 phone I've bought in china.
Managed to unlock it thanks to your manual.
It comes with ROM: Y300-0000V100R00C17B180 (Android 4.1.1).
The only problem I have is that sometimes when I try to dial I do not manage to establish call (the call is tried to be established and then disconnects). When this happens there is also problem in incoming calls. I manage to receive the incoming call but when answered the connection drops after several seconds.
My question is whether this is an issue you are familiar with.
If so, do you have any suggestions?
Are there any new ROMs for this version that maybe handle these kind of issues.
How can I install new ROM on already rooted phone?
Thanks in advance
tamirgz said:
Hi,
I have HUAWEII Y300-0000 phone I've bought in china....
Click to expand...
Click to collapse
Have the same problem - could I instal there soft for Y300-0100 after unlock bootloader?
Can you tell me how do I "zero" the Y300 IMEI? I have one that was left without system and now I can't flash the
HUAWEI_Y300_firmware(Y300-0100,Android 4.1,Emotion_UI,V100R001C00B175,Normal,05011FKA)
Now I can't revive my Huawei?
Thanks
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
I tried the official one but the performance is very low:crying::crying::crying::crying:
Ram Expander on Huawei Asend Y300
I rooted my phone it works properly. Everything working fine. I just have have one problem that how to expand its ram. Plz tell me.
I tried with 2gb class 6 card with swalpt expander but it show nothing in it.
Huawei Y300 Ram Expander
Plz tell me how to expand ram of Huawei Ascend Y300.
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
hi there, i believe you can only flash the official firmware upgrades from a official ROM because when you check for upgrades to the firmware it gives you a option to install from local storage which i have yet to see in a custom ROM. in future i would always recommend a backup before installing any other ROM
hey someone flashed the official rom successfully?
zeroing imei
can you write how to zero imei code
flashing huawei y300. if you can upload any ctock or custom ro who i can install in
mobilexpert said:
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
Click to expand...
Click to collapse
if you can upload any custom or stock rom who i can install in stock recowery for huawei y300(recowery name is .android system recowery<3e>
huawei y300 flashing
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
how to get or hack bootloader code if my phone is bricked.
or
if you can upload any custom or stock rom to install in stock recowery(i can go to recowery and i can force upgrade but fails at step 2/2).
recowery name is ''android system recowery <3e>''.
or if i can instal any custom recowery now i install rom trought this custom recowery.
WRITE ANY OPTION TO WAKE UP MY PHONE.
falshing huawei y 300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
i install chainfire 3d and when i instaling driver my phone is shut down and i can wake up him from that it only show huawei ascend logo i can go to stock recowery and i can force upgrade but fail at ste 2 can you fix it
Unlockin Huawei Y300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=BBliIomdLOI
You can unllock bootloader like this see on video
Sigma-key app
Ateeq Rana said:
Plz tell me how to expand ram of Huawei Ascend Y300.
Click to expand...
Click to collapse
Search playstore I forget the excat name of the app. I used swapit(the name has changed now I forget the name) this uses your sd card as ram but do take note that the more u use your sd card the quicker it can go bad.
Hi there,
My wife has this P8 Lite (Young named model in fact) version ALE-TL00C01B250, which is a Chinese model with Chinese firmware.
I want to upgrade it to the lastest official chinese firmware, but the built-in sytem update check tells there is no other version available (Android 5.1.1, UI 3.1).
I have seen around some how-tos to convert to international version of P8Lite with Marshmallow, involving root and required tools. But we just want to keep the Chinese firmware, without having to install google apps and want to keep the so-called 'chinese bloatware'. So, basically we just need to find the official chinese firmware for the phone and use it, perdiod... but as I can't read Chinese, searching on officialor unofficial Huawei chinese forums is pointless.
Thus, some help here would be really appreciated to get the official Chinese update file and how to apply it properly.
Thanks in advance for your help!
PH
pierrehenry said:
Hi there,
My wife has this P8 Lite (Young named model in fact) version ALE-TL00C01B250, which is a Chinese model with Chinese firmware.
I want to upgrade it to the lastest official chinese firmware, but the built-in sytem update check tells there is no other version available (Android 5.1.1, UI 3.1).
I have seen around some how-tos to convert to international version of P8Lite with Marshmallow, involving root and required tools. But we just want to keep the Chinese firmware, without having to install google apps and want to keep the so-called 'chinese bloatware'. So, basically we just need to find the official chinese firmware for the phone and use it, perdiod... but as I can't read Chinese, searching on officialor unofficial Huawei chinese forums is pointless.
Thus, some help here would be really appreciated to get the official Chinese update file and how to apply it properly.
Thanks in advance for your help!
PH
Click to expand...
Click to collapse
Download firmware from either Huawei's official website or carbon Tesla and update it by going in setting--->updater---->local update.
.
.
You may lose is data so I recommend to make a backup.
Thanks for your replay, but the Carbon Tesla does not provide any ALE-TL00 firmware, only ATE-L21 which doesn't fit our purpose.
Huawei's official website (in Chinese to access ALE-TL00 firmware) is... in Chinese, and I can't read or find what I need... same as I mentioned it already for the official forum... but even after trying some 'random' clicks, I found only Lolipop version of firmware...
pierrehenry said:
Thanks for your replay, but the Carbon Tesla does not provide any ALE-TL00 firmware, only ATE-L21 which doesn't fit our purpose.
Huawei's official website (in Chinese to access ALE-TL00 firmware) is... in Chinese, and I can't read or find what I need... same as I mentioned it already for the official forum... but even after trying some 'random' clicks, I found only Lolipop version of firmware...
Click to expand...
Click to collapse
You SHOULD obtain the beta update.
1. Be sure: your phone must have original recovery and unrooted
2. Via HiCare (not from play store, but that preinstalled). From here go to beta testing, or rom update (accept the terms, maybe the text is in chineese but this you will understand)
3. If none above are working, try installing twrp, root, and flash sokkobans modified b564 cn firmware
(read the instructions)
tamaskurti said:
You SHOULD obtain the beta update.
Click to expand...
Click to collapse
Yes, we've got access to teh HiCare installed app, and there is an update offers (B551). Unfortunaterly, we have no account, and making one leads to error (probably a country issue).
But that's something I can try to fix.
Thanks!
Hi I am new to this so please do bare with my lack of knowledge
first things first I never had been in the P9 Lite Beta I brought the phone and I have never installed any roms or so on
my question is it seems my phone is branded to the Germany Telekom
that's where I brought it makes sense my question is I can not go away from the
firmware or can I go from there firmware to another firmware like the one you can download from there main site that is unbranded
why do I think my phone is branded is because I have tried the Update.app from the 27.03.17 I do the dial code and it restarts it starts goes to 7 percent and it cuts out
failed to install reboot phone and it goes back into the 6.0 Marshmallow
I am wandering how other people are able to install the B170/B171 update I know my Phone Model is (Huawei P9 VNS-L11) but the Phone Model is Huawei P9 LITE Vns-L31 ???
how are people in Europe to install the phone prove its the final code an not the beta since I am not able to update an may people are saying its finished and it being rolled in OTA
what do I have to do to remove the Telekom software and install a stock rom without it being locked preventing me from installing the update to 7.0 please replay thanks you and enjoy the weekend
Hey all, I need help to install a ROM with TWRP
I have:
Huawei P9 2017
Emui 4.1
Android 6.0
VNS-L23
I want to install a ROM with Android 8.0
I download lots of ROM's to update, but I don't know how. Sry for bad English ~
crizpy said:
Hey all, I need help to install a ROM with TWRP
I have:
Huawei P9 2017
Emui 4.1
Android 6.0
VNS-L23
I want to install a ROM with Android 8.0
I download lots of ROM's to update, but I don't know how. Sry for bad English ~
Click to expand...
Click to collapse
Dude you need to upgrade to EMUI 5 first.
Use Firmware Finder app and dns/vpn method to do this, many threads here
or the internet explain how to.
You just need to know your correct firmware.
VNS-L23CxxxBxxx ?? Single / dual sim ?