Related
When I connect my Nexus 7 to my Windows XP (SP3) PC via USB, it's obvious the computer recognizes it and it tries to install ADB drivers. Whether I choose to install those drivers or not, I still can't locate my device in the Windows Explorer Tree. I checked Disk Management for the hell of it and nothing but my PC's harddrives were there. There's an attempt to install drivers for "MTP" but that fails and I'm pretty sure that's the cause; however, I'm unable to replicate it, even as I uninstall/reinstall applicable drivers from the device manager the MTP failure never happens anymore. I did some googling and found a thread with someone who had a similiar experience. In turn, I downloaded https://www.box.com/s/2c25e8bc42ecce400afd to try a different set of drivers. Same problem. Driver install is fine for ADB, but still unable to see my device in Windows Explorer. I'm able to successfully connect the device to the PC with PTP for the camera. I can access DCIM and cache which can serve as a work around, but I'm hoping you can provide any ideas you might have. Thank you!
edit - ***resolution***: Ok, I figured it out...I had to disable USB debugging. I don't know if this helped either, but I installed these drivers as an alternative to the drivers that were originally installed: https://www.box.com/s/2c25e8bc42ecce400afd
While connected to PC, I switched to PTP mode because I was about to give up and just use that
I then disabled usb debugging and switched back to MTP at which point the drivers successfully installed and I could now view my device in Windows Explorer. I also believe downloading the drivers in the link above helped since the first crack I took at this was unsuccessful with existing drivers.
install pdanet on pc and it will install drivers for u so it will be recognized
Ok, I figured it out...I had to disable USB debugging. I don't know if this helped either, but I installed these drivers as an alternative to the drivers that were originally installed: https://www.box.com/s/2c25e8bc42ecce400afd
Been battling with this on my XP machine since yesterday. I couldn't even get debugging to work until I installed NakedDriver. And even still, there seems to be no way to get MTP to work without turning debugging off. On my Win7 machine everything worked perfectly, both ADB and MTP, right out of the box. I have the Galaxy Nexus drivers installed on both machines (which I've read are compatible with the N7). I also have the latest version of Windows Media Player (I've read that some older versions have issues with MTP). Is anyone else able to run ADB and MTP on XP?
*edit*
A: Does PDAnet let you use MTP and ADB simultaneously? Because I really don't want to install it if I don't have to. I got rid of it ages ago (too many things starting up at boot time).
B: I have a Galaxy Nexus also, and I have no issues on the XP box.
I wouldn't bother with MTP, it's not always showing the contents of the internal storage properly when viewed in Windows Explorer.
Earlier today when I was trying to set up a backup profile for it, it didn't copy all the files off. On closer inspection I found folders like TitaniumBackup to be completely empty, which is not true according to ES File Explorer on the tablet.
I tried connecting MTP again, with USB Debugging on and off but this made no difference. Also I'm only seeing the Notifications folder instead of 36 folders on the internal storage now, really random how it's working.
asus site now has a usb driver for N7
try that
Nordendorf said:
asus site now has a usb driver for N7
try that
Click to expand...
Click to collapse
Updated with ASUS drivers, still doesn't view internal storage fully.
Salty Wagyu said:
Updated with ASUS drivers, still doesn't view internal storage fully.
Click to expand...
Click to collapse
Same here. No change with the Asus drivers. Still can't use MTP when ADB is turned on.
poo. how do I transfer my audiobooks to this stupid device without working drivers?
1. Please disconnect Nexus7
2. Remove drivers on PC.
3. Toggle ON : Settings->Wireless&Networkings->More->NFC.
4. Re-connect device
Good luck !
GotLoveForAll said:
poo. how do I transfer my audiobooks to this stupid device without working drivers?
Click to expand...
Click to collapse
1. Uncheck MTP, check the one next to it (Camera)
2. Unplug USB
3. Turn off USB Debugging (Uncheck it)
4. Plug in USB
5. Should say connected as camera, then a new window will pop-up allowing you to see your files.
Tell me if it works!
im having trouble too, is there any way to make the device to be recognised as a flash drive?
Internal memory partly invisible from Windows 7 Explorer
Salty Wagyu said:
I wouldn't bother with MTP, it's not always showing the contents of the internal storage properly when viewed in Windows Explorer.
Earlier today when I was trying to set up a backup profile for it, it didn't copy all the files off. On closer inspection I found folders like TitaniumBackup to be completely empty, which is not true according to ES File Explorer on the tablet.
I tried connecting MTP again, with USB Debugging on and off but this made no difference. Also I'm only seeing the Notifications folder instead of 36 folders on the internal storage now, really random how it's working.
Click to expand...
Click to collapse
Same observation here (a few months later) on stock Android 4.1.1 rooted.
It seems that new files in the internal memory remain invisible for a long time, but so far they have become visible eventually, sometimes a day or two later. I have no clue what could possibly cause this, and I have not found any trick or workaround that makes them visible, not even rebooting. Any hint is welcome.
SE4GT said:
1. Uncheck MTP, check the one next to it (Camera)
2. Unplug USB
3. Turn off USB Debugging (Uncheck it)
4. Plug in USB
5. Should say connected as camera, then a new window will pop-up allowing you to see your files.
Tell me if it works!
Click to expand...
Click to collapse
Didn't work. Just shows up as a camera with the limited folder access one would expect.
Workaround
I now use the following workaround.
Install SDrescan from Google Play.
Run it.
If you already had your phone connected to a computer as a media device (MTP) and are watching the contents of your SD card or internal memory in Windows Explorer, press F5 to refresh your view. If not, connect it now.
I'd be curious whether this works for you as well. If it does, press the THANKS button below.
Same issue with an old ibm x40 udated to windows xp pro SP3.
I've installed mtp driver, without success
I've "tried" to install asus driver, without success
I've tried to do as above with the help of the nexus toolkit, without success.
Everytime, the laptop recognize the device as android ADB interface.
Someone could help me?
Thank you in advance
mistershark said:
Everytime, the laptop recognize the device as android ADB interface.
Click to expand...
Click to collapse
Disable USB debugging in your phone.
Same problem with my moto xoom...files not showing in MTP using windows xp...still have not found any solution
hgmichna said:
Disable USB debugging in your phone.
Click to expand...
Click to collapse
+1 have to toggle USB debugging in winXP
hgmichna said:
I now use the following workaround.
Install SDrescan from Google Play.
Run it.
If you already had your phone connected to a computer as a media device (MTP) and are watching the contents of your SD card or internal memory in Windows Explorer, press F5 to refresh your view. If not, connect it now.
I'd be curious whether this works for you as well. If it does, press the THANKS button below.
Click to expand...
Click to collapse
It works! THANKS A LOT!!!
Hello. Im new to the Nexus 10. I downloaded skipsoft Android toolkit, installed adb drivers in the package and rooted the Nexus and installed recovery..it was easy using the toolkit. So the ADB drivers must have worked- at least in the environment it is used in to do these things. But these drivers dont work to transfer files between the nexus and the computer running winxp. I have USB debugging and PTP, have tried every other dirver package that has been mentioned on all available forums, have tried different usb ports, different cables etc. n my computer the device is recognised as a Nexus 10 but clicking on it gives a blank page, so cannot see the Nexux files. WTF this is driving me mad. Any ideas?
Re
Hi Ghosta,
Are you using a USB 3 port? as i have had many strange issues with these the ports. The issue is caused by one of the intel drivers cant remember exactly which way but there is no easy way to fix this. If this is your issues i would try and find if you have a USB 2.1 port you can use or the Esata ports on laptops tend to be usb 2.1 inside...even though they dont look like it haha
Hope this helps
ghosta12 said:
Hello. Im new to the Nexus 10. I downloaded skipsoft Android toolkit, installed adb drivers in the package and rooted the Nexus and installed recovery..it was easy using the toolkit. So the ADB drivers must have worked- at least in the environment it is used in to do these things. But these drivers dont work to transfer files between the nexus and the computer running winxp. I have USB debugging and PTP, have tried every other dirver package that has been mentioned on all available forums, have tried different usb ports, different cables etc. n my computer the device is recognised as a Nexus 10 but clicking on it gives a blank page, so cannot see the Nexux files. WTF this is driving me mad. Any ideas?
Click to expand...
Click to collapse
What does Device Manager show? Device name, its Properties and exclamation mark?
You do know that if your device has a "password" then you must be logged in to see its contents.
peterk-1 said:
What does Device Manager show? Device name, its Properties and exclamation mark?
You do know that if your device has a "password" then you must be logged in to see its contents.
Click to expand...
Click to collapse
Thanks for the replies and suggestions. All shows up OK in device manager, the device is not password protected, and the laptop has usb2 ports. I had another try today, after connecting the nexus it shows up in my computer as a camera, labelled nexus 10, with the camera icon. When I click on the icon it opens a special folder, must be a camera folder and the camera and scanner wizard starts. After a while it detects the photos on the nexus ( I have loaded a lot on it via USB otg using flash drive ), but thumbnails of the photos are not downloaded as I usually see when I connect a camera. The wizard downloads photos back to the computer, but each photo is about 18 kB instead of the 2 mb they originally were. So it appears a connection is happening, but a very strange one. I don't like to be beaten on problems like this one, but searching the net has not given me any answers, and I don't understand the android system well enough to know what to try next.
I think your device is working. If you connect it up as it now is and then go into Settings > Storage and tap the top RH corner menu you get the USB Computer Connection and select that and change it to MTP you should find it is now visible in My Computer or after auto install of the driver it will be visible. I'm brain dead - you said you had a PTP connection!
peterk-1 said:
I think your device is working. If you connect it up as it now is and then go into Settings > Storage and tap the top RH corner menu you get the USB Computer Connection and select that and change it to MTP you should find it is now visible in My Computer or after auto install of the driver it will be visible. I'm brain dead - you said you had a PTP connection!
Click to expand...
Click to collapse
No PTP conection or MTP connection either. The Nexus also shows up in Device Manger under Imaging Devices when USB deugging is on, which is causing the camera and scanner wizard to start, although it doesnt work properly. When i disable it nothing happens at all. No idea where to go from here.
There is or was an issue with XP see http://forum.xda-developers.com/showthread.php?t=2305943
peterk-1 said:
There is or was an issue with XP see http://forum.xda-developers.com/showthread.php?t=2305943
Click to expand...
Click to collapse
Thanks for the suggestion, I had already tried that but I did it again just to make sure. It did not work for me.
Have you tried following the driver install guide from Wug's toolkit? I've never used Skipsoft's but if it doesn't have you delete old drivers properly it's possible there's some old or corrupted driver sticking around from all the installs you've done. If you follow Wug's guide exactly you should end up with the only the correct drivers installed. Also, what ROM and kernel are you using? It's possible the issue is there.
capnkrunch said:
Have you tried following the driver install guide from Wug's toolkit? I've never used Skipsoft's but if it doesn't have you delete old drivers properly it's possible there's some old or corrupted driver sticking around from all the installs you've done. If you follow Wug's guide exactly you should end up with the only the correct drivers installed. Also, what ROM and kernel are you using? It's possible the issue is there.
Click to expand...
Click to collapse
I used a program called usbdeview to uninstall every USB driver with an "android" or "adb" description which should have cleaned up my drivers? Then after reinstalling drivers I tried again no difference. I ran android-tools and can push and pull files to and from the computer and nexus, (from command line) so I believe I have eliminated hardware problems and software problems on the nexus. This leaves the computer, which works perfectly with my other android devices running 4.1.1.
Just in case this helps. In usbdeview I have 5 nexus 10 entries. They all have the vendor id of Google 18d1 and a unique Product ID . Which driver connects is related to the device settings:
PID Device settings
4ee1 MTP
4ee2 MTP + USB debugging
4ee5 PTP
4ee6 PTP + USB debugging
d002 USB debugging
With the device connected I can change settings and see the change in connected driver in USBDeview.
peterk-1 said:
Just in case this helps. In usbdeview I have 5 nexus 10 entries. They all have the vendor id of Google 18d1 and a unique Product ID . Which driver connects is related to the device settings:
PID Device settings
4ee1 MTP
4ee2 MTP + USB debugging
4ee5 PTP
4ee6 PTP + USB debugging
d002 USB debugging
With the device connected I can change settings and see the change in connected driver in USBDeview.
Click to expand...
Click to collapse
This info does provide me with some way forward. With USB , when connected ptp I have a nexus 10 USB composite device and a nexus 10 digital still camera connected with the green light in USB deview, and also a blank device name, connected, description android composite device with a purple light. I'm guessing purple means not working. But changing drivers does nothing to change the purple light. Switching to mpt gives an additional blank name Google nexus adb interface also with purple light shown as connected. All connected devices show vendor 18d1. Drivers tried 1) clockworkmod (supplied with skipsoft); 2) naked drivers 3) Google drivers. Any clues what to try next?
2 things to check. I just tried running usbdeview from Wug's toolkit. It was v2.0 and wasn't the same as the version I have installed v2.3 - and there have been a significant number of changes. If you have XP pro x64 then you must use the x64 version of usbdeview - again I think Wug's may only ship with 32 bit usbdeview http://www.nirsoft.net/utils/usb_devices_view.html You will also find an explanation of the coloured radio buttons.
If you find you need to update usbdeview then I would suggest you uninstall the device drivers (instructions in Wug's toolkit?) then new drivers from http://developer.android.com/sdk/win-usb.html#top and follow the linked install instructions.
peterk-1 said:
2 things to check. I just tried running usbdeview from Wug's toolkit. It was v2.0 and wasn't the same as the version I have installed v2.3 - and there have been a significant number of changes. If you have XP pro x64 then you must use the x64 version of usbdeview - again I think Wug's may only ship with 32 bit usbdeview http://www.nirsoft.net/utils/usb_devices_view.html You will also find an explanation of the coloured radio buttons.
If you find you need to update usbdeview then I would suggest you uninstall the device drivers (instructions in Wug's toolkit?) then new drivers from http://developer.android.com/sdk/win-usb.html#top and follow the linked install instructions.
Click to expand...
Click to collapse
I gave up completely on this, and connect via wifi using ES file explorer. I bought my wife a new tablet an Acer Aconia A1-830 and it has the same problems, impossible to connect via ADB, with exactly the same symptoms. Yet our phones connect via ADB without a problem, but both are Androild 4.1 or earlier and the tablets 4.2 or younger. Obviously an Android generated problem that arose when 4.2 was released and on which has no fix.
Anyone else with problems seeing the storage after plugging into PC? adb command works and device drivers installed. Found another forum where turning the usb from MTP to charging and back under developer options does the trick. I have a non stock ROM and seeing if fresh out of the box experiences the same thing.
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
rramey23 said:
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
Click to expand...
Click to collapse
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Kandydish said:
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Click to expand...
Click to collapse
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
rramey23 said:
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
Click to expand...
Click to collapse
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Kandydish said:
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Click to expand...
Click to collapse
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
zosimov21 said:
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
Click to expand...
Click to collapse
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Kandydish said:
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Click to expand...
Click to collapse
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
zosimov21 said:
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
Click to expand...
Click to collapse
I have downloaded them. How do I specifically choose just that file? When I go through updating the driver, it asks for a folder location.
Go to dev options, switch the USB from ptp back to mtp and it works for me
xxsashixx said:
Go to dev options, switch the USB from ptp back to mtp and it works for me
Click to expand...
Click to collapse
Tried. Keeps trying to install the MTP drivers and it won't go through.
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Kandydish said:
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Click to expand...
Click to collapse
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
bartendersimon said:
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
Click to expand...
Click to collapse
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Kandydish said:
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Click to expand...
Click to collapse
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
bartendersimon said:
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
Click to expand...
Click to collapse
Changing it from charging to MTP shows a MTP device in Manager with a yellow exclamation mark next to it. When looking into the details, it says that no drivers are installed. When I try "Updating Drivers", it says "Windows failed to install drivers. Code 28" or something along those lines. Code 28 MEANS that Windows failed to install drivers.
Thanks for nothing Microsoft.
Nexus 6p Connection to PC Issue - This Helped!
I had similar problems with PC not recognising my Device. I found http://www.technobuzz.net/install-google-nexus-6p-usb-drivers/ which helped me solve my issues.
1. Downloaded and installed the Huawei Nexus 6p drivers. This installed a Huawei Task Manager which connection to pair was still not recognisable.
2. Deleted old drivers (acer, samsung, htc) from' Device Manager'. This actually helped PC recognise my device which showed up in the Device Manager>Other Devices>Nexus 6p, also in PC interface but once moved off charging to MTP, computer didnt recognise device.
3. Downloaded and installed the adb/fastboot installer. Followed instructions till step 10. My screen didn't show anything like Andoid ADB interface, it displayed MTP file install, which I installed. Just remember to refresh in My PC interface when changing over from charging to MTP, sometimes Nexus 6p will be hidden.
4. Uninstalled the Huawie Task Manager.
This has solved my problem with PC and Device connection. The instructions given are from what I can recall of the process I went through.
Credit to Sidharth Rathore from Technobuzz for this solution.
Hope this helps.
Later.
p.s. I have a windows 10 laptop if this helps.
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I was having the same issue until I uninstalled some other debugging drivers I had installed. So I would recommend crawling through your installed apps for any other android usb drivers and uninstalling them if you still have this issue.
Working on mine right now. Found that USB 3.0 ports will not recognize device. Once plugged into a 2.0, it is recognized. Might help your issue
Hello, I am having a rather strange problem. My PC did the dreaded auto upgrade to windows 10 the other day and I also got a new Nexus 6P. It seems my computer won't recognize my phone, at all, when I plug it in via USB. It's not even showing up in the device manager as a problem, it's like nothing happens at all.
I have
- downloaded and installed the latest google usb driver (right click install)
- downloaded the latest mtp drivers
- downloaded official nexus package from Huawei
- installed ADB and android SDK and also reinstalled the drivers from the SDK manager.
- downloaded some update for windows media player as someone mentioned that could be the problem
- tried different cables
- tried different ports (usb 3 too)
I am really at a loss. My work computer works just fine with it so I know the phone and the cable are okay and other things work on those ports on my home computer. By the way the computer is Windows 10 pro - 64bit
robproctor said:
Hello, I am having a rather strange problem. My PC did the dreaded auto upgrade to windows 10 the other day and I also got a new Nexus 6P. It seems my computer won't recognize my phone, at all, when I plug it in via USB. It's not even showing up in the device manager as a problem, it's like nothing happens at all.
I have
- downloaded and installed the latest google usb driver (right click install)
- downloaded the latest mtp drivers
- downloaded official nexus package from Huawei
- installed ADB and android SDK and also reinstalled the drivers from the SDK manager.
- downloaded some update for windows media player as someone mentioned that could be the problem
- tried different cables
- tried different ports (usb 3 too)
I am really at a loss. My work computer works just fine with it so I know the phone and the cable are okay and other things work on those ports on my home computer. By the way the computer is Windows 10 pro - 64bit
Click to expand...
Click to collapse
Have you installed Google USB Driver for nexus 6p? If not, download Google USB Driver, extract it and save it in your any name folder that you can locate it later, plug n6p in your pc or laptop and it should pop up with USB option to select either file transfer or picture transfer, click one of them, Windows should be able to find n6p driver, if not, go to setting on your pc, device manager, then look at highlighted USB of your nexus 6p whether it is properly installed, if not, then install it by finding the driver that you extracted in that specific folder... Hoping this works for you.
luckyfate said:
Have you installed Google USB Driver for nexus 6p? If not, download Google USB Driver, extract it and save it in your any name folder that you can locate it later, plug n6p in your pc or laptop and it should pop up with USB option to select either file transfer or picture transfer, click one of them, Windows should be able to find n6p driver, if not, go to setting on your pc, device manager, then look at highlighted USB of your nexus 6p whether it is properly installed, if not, then install it by finding the driver that you extracted in that specific folder... Hoping this works for you.
Click to expand...
Click to collapse
Thanks for the response, but yea I already got the new usb drivers and installed them via right click install. The thing is though that in device manager the phone doesnt show up, at all, not even as a problem device. Its like its not there. The phone shows that its charging, but it doesn't recognize that its plugged into a usb port. Im really unsure what to do about this.
robproctor said:
Thanks for the response, but yea I already got the new usb drivers and installed them via right click install. The thing is though that in device manager the phone doesnt show up, at all, not even as a problem device. Its like its not there. The phone shows that its charging, but it doesn't recognize that its plugged into a usb port. Im really unsure what to do about this.
Click to expand...
Click to collapse
Did you install x64 driver from Google USB Driver? Check to see to make sure your USB android debugging is checked. It is kind of odd, try to reboot your pc and nexus 6p, then plug your phone in different USB port if your pc has extra USB port..
luckyfate said:
Did you install x64 driver from Google USB Driver? Check to see to make sure your USB android debugging is checked. It is kind of odd, try to reboot your pc and nexus 6p, then plug your phone in different USB port if your pc has extra USB port..
Click to expand...
Click to collapse
Are you referring to this USB driver? I dont actually see a 64 and 32 version:
https://developer.android.com/studio/run/win-usb.html
robproctor said:
Are you referring to this USB driver? I dont actually see a 64 and 32 version:
https://developer.android.com/studio/run/win-usb.html
Click to expand...
Click to collapse
Should be on top of the folder that your extracted...
Ah I see what you are referring to. Well, here is the thing, how do I install those drivers? Remember I cant find it device manager to update the drivers. The only way I could find to install them was to right click the android_winusb.inf file and choose install. It said it installed okay, but of course its not working. Any idea?
By the way, I also have usb debugging on and usb configuration WAS set to MTP, but I just changed it to try the different variations, but now its stuck on charging and wont change to MTP, but I think its because the phone isnt being recognized by the computer because this morning at the office I was able to change the usb type to mtp and the others, but that computer recognized the phone... AGHHHH WTF
robproctor said:
Ah I see what you are referring to. Well, here is the thing, how do I install those drivers? Remember I cant find it device manager to update the drivers. The only way I could find to install them was to right click the android_winusb.inf file and choose install. It said it installed okay, but of course its not working. Any idea?
Click to expand...
Click to collapse
By the way, if your Android debugging on or check? Just turn "developer options" on your phone and then check Android Debugging. To install x64 USB Driver, on your pc, control panel, device Manager, look for phone USB Driver to see it has some kind of yellow triangle, if so update x64 driver from your extracted folder...
luckyfate said:
By the way, if your Android debugging on or check? Just turn "developer options" on your phone and then check Android Debugging. To install x64 USB Driver, on your pc, control panel, device Manager, look for phone USB Driver to see it has some kind of yellow triangle, if so update x64 driver from your extracted folder...
Click to expand...
Click to collapse
Hey Lucky, I really appreciate you helping me out here, but just so you know I am no newb with this kinda stuff. I have went through this process on a couple other computers with no problem, so when I say its not showing up in device manager I mean its literally not there. Its not there and just under some other name or with a problem icon, its literally not in the device list. Also, I do have usb debugging on
luckyfate said:
By the way, if your Android debugging on or check? Just turn "developer options" on your phone and then check Android Debugging. To install x64 USB Driver, on your pc, control panel, device Manager, look for phone USB Driver to see it has some kind of yellow triangle, if so update x64 driver from your extracted folder...
Click to expand...
Click to collapse
Please go to YouTube and type "install usb driver on nexus 6p" search and then follow instructions from the video... Good luck.
WAIT! I got it... Wow I would of never thought this, but apprently my Wacom was the problem. As soon as I unplogged my wacom tablet the phone picked right up... Strange... Anyways, case closed... freaking conflicts!
Okay hold on, still having problems. Well, now the computer dings when I plug it in, but it still doesnt show up. However when I change the phone usb to PTP the phone becomes visible on the pc in windows explorer (but still not in device manager) and when I put it to MTP it disconnects and I cant see it in windows explorer anymore, and still cant find it in device manager... Ugh...
Okay sorry for all the messages, but i did get the MTP working. I had to uninstall the reinstall the drivers a couple times... very strange, but whatever its working... yay!
robproctor said:
Okay sorry for all the messages, but i did get the MTP working. I had to uninstall the reinstall the drivers a couple times... very strange, but whatever its working... yay!
Click to expand...
Click to collapse
Did you figure out the problem? I'm having the exact same problem with mine and with USB mode not switching from Charging and the PC not even recognizing a USB device was plugged in.
I found using a different cable solved my problem. Don't really know why cause the first one I used seemed fine and worked to charge it, but by using a different one, Win 10 recognized it and got me in the game.
Hi,
I've received a couple of days ago two Onplus 5.
They both work great but when I try to connect them to my desktop, they get detected as "qualcomm hs-usb diagnostics 900e" by windows 10 that states the USB device is not recognised.
The issue is reproduced on a laptop, although it did get picked up once by the laptop, only to fail on a second attempt with the same device name "qualcomm hs-usb diagnostics 900e" after I installed the driver provided by Oneplus.
I read on the forum that "qualcomm hs-usb diagnostics 900e" is normally related to Bricked phone issues, which is not my case and I don't know what to do to resolve this.
I also tried to activate the USB debug mode on the phone, but this didn't change the problem.
My windows are all up to date and my phones as well (running Android 7.1.1, OxygenOS 4.5.2)
Has anyone experienced this issue with that phone or any other?
I would greatly appreciate some help and I thank you in advance for reading this and offering advice.
Unplug phone, restart windows.
Go to settings / about phone / press build number 5-6 time (don't remember exactly how many times) to enable developer options
turn on USB debugging
select USB configuration MTP (media transfer protocol)
plug it in
Install drivers
And now on you should have it working every time you plug it to your laptop.
dcrnic said:
Unplug phone, restart windows.
Go to settings / about phone / press build number 5-6 time (don't remember exactly how many times) to enable developer options
turn on USB debugging
select USB configuration MTP (media transfer protocol)
plug it in
Install drivers
And now on you should have it working every time you plug it to your laptop.
Click to expand...
Click to collapse
Thanks dcrnic, I must have skipped a step with the debugging mode because your procedure did the trick.
Is this a normal process to have to go to Dev mode and Debug mode to be able to connect to a PC?
Thanks again for your help!:good:
Win 10 do not recognize device as it is so new. Probably in the future this will be solved on Windows end.
I found online link for drivers
https://drive.google.com/file/d/0B-LgkimFUEksbjRCY1BkWnduVW8/view?usp=sharing
Moderators
Please delete ... Today forum is so slow, and it do double posting for some reason even I press reply just once.
Thank you.
FIXED: Use stock op5 cable. The other cable that gave me issues works just fine for op2.
The phone used to be seen by win10, but since oem unlock and superSU, the computer at work doesn't recognize it. Ran the 4.5.2 update with same results. I noticed that in Developer Options -> Select USB configurations charging is selected and greyed out. Going in selecting anything else returns is to Charing.
Device Manager > Find the phone > Right click > Update drivers (or something like that) > Select driver from Computer > Select "MTP USB Device" Enjoy
I'm having the same issue. If I manage to get it to connect to the PC, then after I unplug and plug it again it gives the same not recognised balloon. It only seems to work with USB Debugging On
I ended up using the original op5 cable and it recognizes the phone right away.The cable that didn't work for op5 is not stock, but worked perfectly fine for op2.
Same issue
Even I'm facing the exact same issue on my op5
dcrnic said:
Win 10 do not recognize device as it is so new. Probably in the future this will be solved on Windows end.
I found online link for drivers
https://drive.google.com/file/d/0B-LgkimFUEksbjRCY1BkWnduVW8/view?usp=sharing
Click to expand...
Click to collapse
The drivers are on the phone, they're mounted as a drive when you plug the phone in? They even add ADB tools when you install them, they're in C:\Program Files (x86)\OnePlus USB Drivers and the ADB tools are in the Android folder within there.
djsubterrain said:
The drivers are on the phone, they're mounted as a drive when you plug the phone in? They even add ADB tools when you install them, they're in C:\Program Files (x86)\OnePlus USB Drivers and the ADB tools are in the Android folder within there.
Click to expand...
Click to collapse
Yes, they are on the phone, but computer need to recognize device to see it. It does not, so the drivers on the phone are useless in this case.
I compared this to my ZTE Axon 7. If you choose "Charge only" the Axon 7 is recognized as a USB input device. This should also happen for our OP5 but the driver (which btw. is a windows standard driver) does not contain PID 900E and also does not like to have it forced to a USB input device.
The Axon 7's PID is F006.
However, the real issue is when Windows decides to use Qualcomm's HS USB Diagnostic Interface driver which seems to give even more trouble (at least for me). When I tried to switch to MTP this would not work and my Windows 10 hung itself up when rebooting or shuting down. For now I just disabled the "Unknown device" to prevent such things from happening. Charging still works this way and the phone is correctly recognized when changing to MTP.
If you are facing the same issue, disconnect the Oneplus 5 from your PC, reboot the PC and after that launch the device manager. You need to enable hidden devices in the view menu of the device manager to see disconnected devices. Now remove the device "Qualcomm HS USB Device Interface" and also choose to uninstall the driver itself. After that you can connect your device again and it should pop up as "Unknown device". Then simply disable the device.
Regarding the drivers from Oneplus: this package is lacking a driver for the device we are seeing (VID_05C6&PID_900E).
Does anyone know if the latest update (OxygenOS 4.5.5 update) addresses this issue? It says the following as one of the bug fixes:
"To restore connectivity to a Windows 10 PC, please turn off USB debugging prior to the upgrade"
aa_chow said:
Does anyone know if the latest update (OxygenOS 4.5.5 update) addresses this issue? It says the following as one of the bug fixes:
"To restore connectivity to a Windows 10 PC, please turn off USB debugging prior to the upgrade"
Click to expand...
Click to collapse
Worked for me, only remember to Uncheck usb debugging BEFORE the update....
Hmm, didn't work for me, same behavior as before the update...Qualcomm HS-USB as soon as phone is plugged in...USB debug was off.
Sent from my ONEPLUS A5000 using Tapatalk
try changing port (and remember to restart the pc)
Just got my phone today. It updated to 4.5.5 immediately. All I did was connect it to the computer (windows 10) and everything works.
bricky23 said:
Just got my phone today. It updated to 4.5.5 immediately. All I did was connect it to the computer (windows 10) and everything works.
Click to expand...
Click to collapse
It worked the first time too, but not the second time...at that point connected detected as Qualcomm HS-USB Diagnostic, and computer won't shut down.
And yes I installed it a few time, and it works the first time connecting, but not the second time around.
Sent from my ONEPLUS A5000 using Tapatalk
I don't have my OP5 yet, but I had a very similar and difficult experience with my OP3 when I first received it on Windows 10 Pro. On top of installing the proper drivers, I also had to go into Device Manager and run some steps (I'm going off on memory so they may not be entirely accurate). The root cause is driver signature check enforced in Windows 8+. So by going into Device Manager and seeing "kedacom USB driver", right click and find the oneplus USB driver you installed above and also need to disable the driver signature enforcement (in windows 10 go to advanced startup settings, reboot and choose (I think) #7 then reboot). Then plug in the phone usb go to device mgr right click on kedacom USB driver and choose the oneplus driver.
I don't have all the steps in the right order but it should fix your issue.