CM 10 DSP Manager with Complete Libs
Works on Miro/Tipo/Tipo Dual/E and E Dual/J
If you are tired of plain sound on your phone this mod will bring joy to your ears once more
Disclaimer
- Please do not blame me for bricked devices since I am not responsible for such
- I won't vouch for broken devices or the like
Features
- Well we all know that CM 10's DSP Manager brings great audio So I ported those libs and App so that it can be flashable and used in any ROM
- Loudness Compensation
- Clear Bass
- Crisp and sharp Treble
- 5 Stage Equalizer
- Surround Sound with 4 Modes to choose From
- Complete Libs and required system files ( it's not just the app )
Requirements
- A rooted phone with custom recovery like CWM or TWRP
- Or a phone that is rooted with Flash Gordon
Installation
- Download the dspmanager.zip
- Place it on Internal/External Storage ( Depends on your preference )
- Reboot to CWM
- Flash the dspmanager.zip
- Navigate to advanced and Fix Permissions
- Go to Settings> Sound>Music Effects Select DSP Manager
- Reboot and install Apollo.apk ( Works best with DSP Manager )
- Use Apollo or Walkman or any other and not PlayerPro or Poweramp Enjoy
For Flash Gordon Users
- Put in SD card
- Locate the Zip file and select it
- Do not wipe anything and press flash now
- Check Status Bar and press reboot from notif
- Install Apollo and Enjoy
Downloads
Click Here To Download DSP Manager Zip
Apollo.apk : Click Here To Download Apollo Music Player
Recommendations
- Test with Earphones
- Loudness Compensation to Strong
- Bass boost to Moderate
- Do Not enable Dynamic Range Compression
- For the Equalizer please raise the extremes ( the ones on the left and the right ) to 12.0
- Then the ones before the extremes to 5.0 and leave the middle at 0
- Virtual Room to Studio
Credits to CyanogenMod Team for there awesome Audio Files and App
If you plan to use on your ROM this please give me credits
Hi All,
The OP2 has a very low speaker volumes. Can someone mod this or help in editing the required files for increasing the volume of the speaker?
Attached is the stock mixer_path.xml
Even I tried many times to mod mixer_path but no luck..
Hope will get succeed very soon...
Maybe this works: http://forum.xda-developers.com/showpost.php?p=54546620&postcount=2
Already tried this.. Increased the volume to 92..but still no luck..even I tried editing the mixer_paths_i2s.xml but the volume still remains the same..
Hi all,
does anyone know how to boost in call volume and volume on headphones...?
Hello
you can install dolby atmos or viper4android they do the job
did you manage to enable and work viper4android ? how? i manage to install it but it does not work , put selinux to Permissive and install it from inside system/priv-app
Dolby Atmos f**ks up notification/media volume it cannot be lowered down and Viper4Android just does not want to work...
I have Viper4Android on my P9 Lite and it works just fine.
Cannot tell you why it won't for you though.
All I did was install it and of course put SELinux on permissive with the SELinuxModeChanger.
Schlengge said:
I have Viper4Android on my P9 Lite and it works just fine.
Cannot tell you why it won't for you though.
All I did was install it and of course put SELinux on permissive with the SELinuxModeChanger.
Click to expand...
Click to collapse
i did all that too but and i can run Viper but there is no change in soun output... it is like driver is not installed but it is...
tw1st3d83 said:
i did all that too but and i can run Viper but there is no change in soun output... it is like driver is not installed but it is...
Click to expand...
Click to collapse
That happened to me too.
You can try to disable the equalizer and amplifier of your usual media player. Than go to Viper and in the 3 dots (top right corner) go to - Lock effect mode - just choose whatever you want.
I think that switching from Headset to Phone Speaker (with diferent presets ) you have to go again to "Lock effect Mode" and choose it.
It worked for me. Hope this could help you.
Hi,
I have tested many Sound Mods on Oreo beta for SM-Galaxy S8 & S8+. I am just sharing one sound mod i.e. Viper4android XHiFi, which is working on latest built of Oreo beta for S8 & S8+ Tested on Exynos Only
Here is how to:
1. You must install core system
2. Do not select any thing else than V4A XHiFi in Sound Mods
3. You must select to remove deepbuffer in Aroma Installer
4. You have to select Permissive & SD Card fix in Aroma Installer
5. Its based on A.R.I.S.E Sound, so all credit to him
6. I just debloated other Mods that are not working on Oreo
7. I am not a script developer or like that so U have to go throw all screens and just select whatever you read above
8. Download & Flash the Zip file in TWRP
V4A XHiFi
Please upload this file on other sources like, Android file host, zippy share and other trusted file hosting servers.
Link not work
hasanben35 said:
Link not work
Click to expand...
Click to collapse
Link Updated.
Does it work with LDAC codec?
mstormer said:
Does it work with LDAC codec?
Click to expand...
Click to collapse
Try, it out. I just tested all profiles included in this Mod.
rajkabul said:
Try, it out. I just tested all profiles included in this Mod.
Click to expand...
Click to collapse
for me it doesnt, just wondering if anyone got it working with LDAC
rajkabul said:
Hi,
I have tested many Sound Mods on Oreo beta for SM-Galaxy S8 & S8+. I am just sharing one sound mod i.e. Viper4android XHiFi, which is working on latest built of Oreo beta for S8 & S8+ Tested on Exynos Only
Click to expand...
Click to collapse
Thanks man. It works.
Tested on this Oreo based ROM [ROM][8.0][ZRA5][G950F/FD & G955F/FD] alexega Oreo Rom Conrol 200 Mods
Here's how I did it:
1. Download V4AXHIFIModAromaInstaller.zip;
2. In TWRP install V4AXHIFIModAromaInstaller.zip;
3. In Aroma choose only (1) Viper4Android XHiFi, (2) remove deepbuffer, (3) fix sd card permissions, (4) selinux (check); <-skip all other options including Viper4Arise old or new version.
4. Reboot to system;
5. Launch Viper4Android XHiFi;
6. Enable whatever environment you need it for (headset, speaker, BT
7. Boooooom, you will have it working (3 dot menu Driver Status should say Enabled:YES, Processing: YES, Status: Normal).
great to hear. I will try on same rom asap
jemeljsh said:
Thanks man. It works.
Tested on this Oreo based ROM [ROM][8.0][ZRA5][G950F/FD & G955F/FD] alexega Oreo Rom Conrol 200 Mods
Here's how I did it:
1. Download V4AXHIFIModAromaInstaller.zip;
2. In TWRP install V4AXHIFIModAromaInstaller.zip;
3. In Aroma choose only (1) Viper4Android XHiFi, (2) remove deepbuffer, (3) fix sd card permissions, (4) selinux (check); <-skip all other options including Viper4Arise old or new version.
4. Reboot to system;
5. Launch Viper4Android XHiFi;
6. Enable whatever environment you need it for (headset, speaker, BT
7. Boooooom, you will have it working (3 dot menu Driver Status should say Enabled:YES, Processing: YES, Status: Normal).
Click to expand...
Click to collapse
. . . and how would you gage the differences from regular Viper?
I confirm that it works perfectly on s8 950F
THNKS!!!
On my 955F TWRP says zip file corrupted.
Blubber120 said:
On my 955F TWRP says zip file corrupted.
Click to expand...
Click to collapse
Zip file is OK, try to redownload the file.
JeffDC said:
. . . and how would you gage the differences from regular Viper?
Click to expand...
Click to collapse
I would not say its much of a difference, but then again it must be noted that from all the features/tweaks and stuff available in "regular Viper" I mainly use (enable) sound equalizer available in "regular viper" since all other options have proven (in my case) to be either an overkill or nothing over-the-top or something I can't achieve through tweaks in sound equalizer
Hello,
i install it on Oreo but i dint get the app Viper4android.What the mistake.I have installed all right
How to download the zip.file it won`t start to download .. !!
Working great on renovate 9.0
Thanks
install it in RENOVATE ICE 9.1 - CRB7 | NIGHTLY - CRB7 | Android 8.0 but I have a problem ... when I plug into my car, I hear the music audio but in a call I do not and I have to take my cell phone to talk ... Does anyone know how to fix it? It only happens to me with phone calls ... thanks.
If I uninstall XHIFI, I'll have call audio in my car again.
will there be any updates to this module ?? with the previous version of OREO, CRAP, I did not have this problem.
will this work on s7 edge?
Hello, sir will this method work on samsung s7 edge G935FD ? im using oreo 8.0 (samsung experience 9) offical vietnam rom i got this rom from this website. Please reply im so stressed because of this im a music love i managed to get a good headphone but without viper4android music dont feell that good
ARISE
I need ARISE running ViPER4Arise, Dolby, XHIFI, ARISE AM3D modules running on S8+ Oreo, any idea guys, link please if yes, thanks
rajkabul said:
Hi,
...
1 . You must install core system
2. Do not select any thing else than V4A XHiFi in Sound Mods
3. You must select to remove deepbuffer in Aroma Installer
4. You have to select Permissive & SD Card fix in Aroma Installer
5. Its based on A.R.I.S.E Sound, so all credit to him
6. I just debloated other Mods that are not working on Oreo
7. I am not a script developer or like that so U have to go throw all screens and just select whatever you read above
8. Download & Flash the Zip file in TWRP [/B]
Click to expand...
Click to collapse
Hi there, ive done all of the above and the script ran through without errors but under driver status it still states:
Enabled: no
Processing: no
Any help is appreciated
I have tried several roms. AEX woivod 8.1, crdroid difr 8.1, frankenROM 8.1 etc. The in-call volume is very very loud in headset and headphones. Increased the steps but that didnt bring down the minimal volume which is way too high. I tried jasper custom kernal and decreased the headphone gain in sound but that brought down the media gain and the ringing gain levels. It does not get solved by clean flash or even after full internal storage wipe. This is present throughout all custom roms I think. Someone suggested editing mixer_* files in /system/vendor/etc. There are too many of these files and I dont know which values to edit to lower in-call volume.
SOMEONE PLEASE HELP!!!!!:crying::crying::crying::crying::crying::crying:
Someone please help!!!!! I did a recovery to my original miui backup but the problem is still there. I dont mind losing data. Im willing to do any type of clean install to solve this. I just want this bug to go away. Should I change the firmware?
What should I do?
PLEASE HELP!!!
ShadeOfLight said:
Someone please help!!!!! I did a recovery to my original miui backup but the problem is still there. I dont mind losing data. Im willing to do any type of clean install to solve this. I just want this bug to go away. Should I change the firmware?
What should I do?
PLEASE HELP!!!
Click to expand...
Click to collapse
Facing this problem too. I've tried patch as well as editing values in vendor. None seems to work.
So i just have to avoid talking on headphones as of now.
aman_bindal_ said:
Facing this problem too. I've tried patch as well as editing values in vendor. None seems to work.
So i just have to avoid talking on headphones as of now.
Click to expand...
Click to collapse
Have you tried stable Nougat ROMS? I would like to know if the problem is there in nougat or not. Is there no other way to solve this?
try out difr's patch and see if it works (its for 8.1 oreo ROMs)
mixer_paths.xml.zip
krishna_jm said:
try out difr's patch and see if it works (its for 8.1 oreo ROMs)
mixer_paths.xml.zip
Click to expand...
Click to collapse
I tried it bro..... No use....I even tried it on his crdroid build... Thank you so much for responding.
Hey ShadeOfLight,
I have the same problem with too high headset in-call-volume in havoc rom.
Thats pretty annoying...
But I found a solution for the problem that worked for me:
You need tasker and Kernel Auditor for this.
In Kernel Auditor you create two profiles: One with low volume in sound option for calls (I choose value -8) and one with normal volume (value 0) for music.
Now save them under different names. I named them "low volume" and "normal volume".
In Tasker you create two tasks with the Kernel Auditor plugin:
1. "low volume"-Kernel Auditor profile
2. wait (10s) -> "normal volume"
Now go to "profiles" in tasker and create a new profile with the state "Call" (choose any) under phone states.
Define "low volume"-task for the new profil and the "normal volume"-task as exit-task.
This worked for me. During calls I can use my headset again and can listen to music normally.
Maybe this will work for you too.
Best regards