First of all, I'm not rom's developer. I have used his port of ColorOS and FlymeOS and they are very good. I follow his blog and he has just shared his port of MIUI 8 for our OPX. You can check the source thread here:
Code:
http://bbs.wisenjoy.com/thread-562850-1-1.html
The below information is translated by google translate
Preface :
MIUI8 first public trial version, drew off for some time to develop. The current state is a trial version, so we responded with the normal state of mind to experience and feedback BUG
Disclaimer:
This MIUI wooden benevolence (shumxin) produced, synchronous MIUI PatchROM official update;
this MIUI applies OnePlus X, through means oneplus one X all versions (full CNC version was not tested, Oppo A30 untested);
this MIUI prohibited and people in the forum I have not permitted to modify, compile and repackaging;
this MIUI is strictly prohibited and any theft, removal of any software and functions;
any form Please reference I thank my
Acknowledgements :
Acknowledgements object mainly involved adapting MIUI for OnePlus X-project contributions objects, if imperfect, please contact me
OnePlus (bottom package provider)
MIUI (adaptation project provider)
exchange group oil (bug testing and feedback)
Project Open Source Address :
not yet open
Research support:
1. I Alipay account: [email protected] welcome small donations
Bug Feedback:
1.shumxin @ sina.com
2.sina microblogging: http://weibo.com/shumxin
3. To oil exchange group: 572 430 771
ROM presentation:
1.android 6.0.1, based on the official 2.0 hydrogen the OS
2.MIUI8 brilliant experience new
update log:
the first public trial version
Problem Description:
Currently only the basic functions using the official features not yet integrated
Flash requirements:
1. Normal hydrogen 2.0 upgrade from the official recovery, that is, the normal use of hydrogen 2.0
2. I brush into the era of navigation provided by a dedicated 2.0 plus X hydrogen recovery, then double clear brush into the firmware (the reason is based on the present MIUI official hydrogen OS2.0)
3. To follow the above steps do not brush machine can not boot who do not complain
Download:
hydrogen OS2.0 specialized third-party Recovery:
Code:
https://pan.baidu.com/s/1nvQ2aUX
Full ROM:
Code:
https://pan.baidu.com/s/1pLtTVh5
Password: gn8g
Flashing Instruction
Hi friends this is the 1st beta from Chinese developer Shumxin
It comes with Chinese bloatware, Bugs and it don't have the integrated functions like gesture and alert slider settings.
Steps:
1) If you are on OOS 2.X.X bootloader upgrade to to 3.X.X bootloader.
2) Flash the modified version of TWRP for MIUI or one from bluspark or Nachiket.Namjoshi
Refer : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
3) Download the ROM and Flash it using TWRP
Mirror for ROM : https://drive.google.com/file/d/0BzLtOy-IJENIVHpFVURBbjF4UVE/view?usp=sharing
4) If you get error 7 refer post #19 of the thread
5) The flashing of ROM may take some time don't panic. The booting may also take some time to finish. All You Need Is Patience.
6) You can see the MIUI booted with a Process stopped message. Just click OK (fewtimes). The fix may come in future updates.
Thanks �� andrew551 �� for mirror
That's it. If the FC message is repaired you can use it as a daily driver.
That guy is on fire...ports a lot of roms lol. I am waiting for his flyme 6.0 based rom but this is also cool! xD
Google mirror please!
Cant be flash by using twrp? ?
Any mirror?
Sent from my ONE E1003 using XDA-Developers mobile app
bkhuraijam said:
Any mirror?
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
I'll have one up in a couple hours
Finally its here, a sight of big relief!
Sarthak Narang said:
Finally its here, a sight of big relief!
Click to expand...
Click to collapse
No more porting requests [emoji23]
send from continuum transfunctioner x
ya7hu said:
No more porting requests [emoji23]
send from continuum transfunctioner x
Click to expand...
Click to collapse
Hahaha yes
Zat.o.ichi said:
Google mirror please!
Click to expand...
Click to collapse
wait... 15 min. left
---------- Post added at 06:26 PM ---------- Previous post was at 06:12 PM ----------
Mirror: https://drive.google.com/file/d/0BzLtOy-IJENIVHpFVURBbjF4UVE/view?usp=sharing
German Language Support?
Does it require the new bootloader or can it be flashed through the official TWRP?
SORF said:
Does it require the new bootloader or can it be flashed through the official TWRP?
Click to expand...
Click to collapse
it probably needs the modded twrp for oos3 provided in the blu spark kernel thread. But wait for confirmation of another user who might test that
GioCustomROM said:
German Language Support?
Click to expand...
Click to collapse
No
Please can someone write the flashing instructions.... Couldn't understand from OP
Sent from my ONE E1003 using XDA-Developers mobile app
SORF said:
Does it require the new bootloader or can it be flashed through the official TWRP?
Click to expand...
Click to collapse
yep new bootloader and new twrp
thank you !!!
how to flash ?
multi language ?
RoM Review + Flash Instructions
Hi guys! Those who are eager in MIUI flash it immediately.
Problems:
FC on android.process.media
Music apps won't work
Video Players won't work
Camera won't work if the above problem exist.
No Gestures.
Not even dt2w
It comes with Chinese bloatware (may not a problem)
No tri state keys.
Working features:
All the basics except the above.
Flash Instructions:
1) Download the ROM on a pc
2) Open using 7-zip and navigate thru META > com> google> android
3) Doble click updater-script and Open it with Notepad ++
4) Delete the first two lines and make the third line first (hope you understand)
5) Now save it 7-zip asks you to update the zip. DO IT!
6) Flash it using the TWRP for 3.X.X
7) Wait
8) Wait
9) WAIT!
10) Success.
For Google Play Services : Use This http://xiaomininja.com/download/google-app-installer-file-download/?wpdmdl=4765
sundhar88 said:
Hi guys! Those who are eager in MIUI flash it immediately.
Problems:
FC on android.process.media
Music apps won't work
Video Players won't work
Camera won't work if the above problem exist.
No Gestures.
Not even dt2w
It comes with Chinese bloatware (may not a problem)
No tri state keys.
Working features:
All the basics except the above.
Flash Instructions:
1) Download the ROM on a pc
2) Open using 7-zip and navigate thru META > com> google> android
3) Doble click updater-script and Open it with Notepad ++
4) Delete the first two lines and make the third line first (hope you understand)
5) Now save it 7-zip asks you to update the zip. DO IT!
6) Flash it using the TWRP for 3.X.X
7) Wait
8) Wait
9) WAIT!
10) Success.
For Google Play Services : Use This http://xiaomininja.com/download/google-app-installer-file-download/?wpdmdl=4765
Click to expand...
Click to collapse
You can flash it without modifying the updater script using the new TWRP.Also to mention ,installation will take time as package is extracted through the old way.
Related
Hello Everyone
Since DEVDB is not accepting "Redmi Note 3" I am starting this thread to share all the best ROM's, Tweaks & tricks for the Helios-X10 based Hennessy
All link's & uploads will be posted in this OP once the thread is approved.
0) XIAOMI.EU 7.2.3.0 ROM (Stable & Developer) (no China apps, Rooted, Xposed, Gapps) - THIS IS THE BEST!
1) China ROM - Official (Stable & Developer) UPDATE mode (full of China apps, no Root, no Gapps)
2) China ROM - Official (Stable & Developer) - MIUI 7.1.8.0, SP Flash tools mode (full of China apps, no Root, no Gapps)
3) Global ROM - SphinX v2b ManhIT (MIUI 7.1.3.0 Stable with SwiftKey, SuperSU, GApps & no China apps)
4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
5) sMIUI ROM Kitchen (needs custom Recovery - by Handam000)
6) sCM12.1 Unofficial for RN3
Hacks & Tweaks
1) Fingerprint Sensor fix by Shade5
2) Un-brick your Redmi Note 3 if SPFlashTools failed
3) Restore/Change IMEI number
Coming up...
Tweaking 2G/3G/4G band settings , Battery Tweaks , Rooting, SuperSU, GApps ,Unlocking Bootloader
Enjoy!
Shade5
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
IF for any reason you managed to "brick" your phone, just flash the stock China ROM again from the OP or follow the un-brick link for more instructions
Enjoy!
Shade5
Reserved 2
Reserved 3
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
zms786 said:
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
Click to expand...
Click to collapse
Hi ZMS...
Firstly just to be sure - did you SPTools flash the SphinX v2b ROM?
After that if you flash my files exactly as per the screenshot I have put in the folder, the Fingerprint sensor driver's get installed.
(BTW on my 16gb the SphinX v2b works but it didn't work on the 32GB, so I made this fix.zip)
I found this ROM was the cleanest n best hence I made this fix (rather than flashing the Chinese or LoXar rom)
Let me know how it goes for you
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
My rn3 bricked
Shade5 said:
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
Enjoy!
Shade5
Click to expand...
Click to collapse
i follow this just after i flashed v2b, now my RN3 wont even start, i tried to flash it again with v2b, but the sp tool keeps showing error
PLEASE HELP!!!!!!!!!!!
Shade5 said:
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
Shade5
Click to expand...
Click to collapse
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Btw. What's with custom roms for the Redmi Note 3 ? They should be in your first post too...
Is the xposed useful if I install
Sent from my Redmi Note 3 using Tapatalk
if only you said that earlier
Cameo164 said:
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Click to expand...
Click to collapse
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Davidfi1 said:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Click to expand...
Click to collapse
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
---------- Post added at 20:14 ---------- Previous post was at 19:30 ----------
isfanl said:
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
Click to expand...
Click to collapse
Try to reflash SphinX Rom ( http://en.miui.com/thread-207019-1-1.html ) and pay attention that you untick "preloader". Good Luck. :fingers-crossed:
And when this isn't working, try this method: Use SP Tool V5.1516 for flashing the rom (Untick preloader!!). Instead holding only the Vol Down button, Hold Both Vol Down + Power button when plugging the usb cable in. The progress bar should turn yellow and the flash should be completed. Turn on the device, it will take some time, but it should work.
Cameo164 said:
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
Click to expand...
Click to collapse
I did register at the MIUI forum - the problem is with the mega link is not working here for some reason ....
Thank you.:good:
David.
Does anyone have RN3 like me on that picture..
elol said:
Does anyone have RN3 like me on that picture..
Click to expand...
Click to collapse
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Cameo164 said:
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Click to expand...
Click to collapse
How can I flash it?its only use update.zip on sd card or need to use pc or laptop..sory for noob question
zms786 said:
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
Click to expand...
Click to collapse
I'd need some info before I can help you out....
1) Is your phone 16 or 32 GB?
2) What was the initial ROM version on it
3) Did you flash the CHINA stable ROM before the SphinX v2b?
lolo9393 said:
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
Click to expand...
Click to collapse
Hi @lolo9393 , glad the thread is catching on
Some Redmi's are "pre-flashed" with shop-rom's that have Play store
These versions dont register the fingerprint driver's once flashed
I have both 16GB (China, Stable stock, no Play store) & 32GB(Singapore, stable ROM with Play store) RN3's
My fix only re-flashes these (which you didn't as your stock driver's were still working)
Flyme 6 Rom For Samsung T705 & T700Version information:
-By Cyborg (Chinese developer);
-Applicable Samsung T705 (klimtlte);
-ROM version:Flyme 6 beta version;
-Based on LineageOS 13.0. (Thank you for the work done by Exynos5420 team!)
Introduction to the note:
-Please line based on lineageos 13.0.
Notice:
-For T705/T705M/T705Y and T700!, not for T705C;
-About T700: After a lot of user testing, Flyme6 rom can be applied directly to the T700, without any modification (of course,
T700 does not use the call function)! The specific installation is as same as the T705).
-Please brush machine under twrp recovery;
How to install it?
step1: Download lineageos 13.0 installation package :
T705: https://www.androidfilehost.com/?fid=817550096634787685
T700: https://forum.xda-developers.com/galaxy-tab-s/development/rom-lineageos-13-0-sm-t700-t3554485
(Thanks @deadman96385 build lineageos13.0 rom for T700.)
step2: Flashing lineageos 13.0 use TWRP recovery 3.0+;
step3: Download the flyme6 installation package ;
step4: Flashingflyme6 use TWRP recovery 3.0+;
step5: reboot system
Don't forget to Wipes data,cache,and dalvik before you swipe rom!
Flyme 6 Introduction:
-Depth customization based on Andrews 6.0.1;
-To the content of the axis of the system design more primary and secondary, full of immersion, delicate Smart animation to make browsing the page becomes fun and fun;
-Innovation to join the intelligent thinking engine, can learn the user operating habits, according to the use of scenarios to provide intelligent solutions to create mobile phone light intelligence;
-More powerful parallel space security model allows users to multi-identity scenes can also switch freely.
Flyme 6 Highlights:
-Content Design;
-New word reread; intelligent thinking engine;
-Game mode; night self repair; process reaper; lightning start;
-Informed management of intelligent storage; notification fast management; new multi-task management;
-More features can go to Flyme official website to understand
Description:
-This ROM is based on Flyme open source project Pile fit, thanks Flyme development team, LineageOS development team;
-Use a third party Rec brush into the first brush into Flyme be sure to double clear, double before the data backup;
-Flyme6 first brush to start slowly, need to wait about 15 minutes, please be patient waiting to enter the system;
-If you need to double clear, please brush ROM before the double clear; brush ROM after the double will not be able to start the system;
-This ROM is a personal patch patch, non-Flyme co-development group ROM!
Disclaimer:
-1. The ROM has passed my test! As a result of improper operation of the consequences, I and the forum will not bear any responsibility;
-2. Brush before the phone to ensure that at least 50% or more of the power, and to ensure that the brush machine during the mobile phone and computer without any exception;
-3. Brush a risk, the first brush machine friends, be sure to carefully study the forum brush machine tutorial, otherwise the consequences of their own;
-4. I do not own ROM and the copyright of the program, please study and study for the purpose of legitimate use;
-5. It is forbidden to make your own ROM second tampering published! In particular, no technical content of the second package integration promotion software, offenders must study!
-6. If you brush into the ROM, it means that the above agreement has been accepted by default.
Root Support:
-Magisk Manager
Xposed Support:
-Link: https://www.androidfilehost.com/?fid=745425885120750151
Bugs:
-Fingerprint function can not be used;
-Call function has been tested, basically no problem. But the Mms function may have some problems, such as: when you send information to others, the other party will receive your information, but your tablet shows "send failed", there is no solution, if you know how to do ,please tell me. Thanks @acui @mac231us before doing feedback.
-This is based on Flyme experience version of the adapter, there should be some can not repair the "flyme error". If any, please feedback, maybe in the next version to solve!
Changelog:
---------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.07.20]:
-First beta;
-Added magisk root
-Update the release files for version Flyme 6.7.7.14R;
---------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.07.21]:
-Change version: Flyme 6.7.7.14R Cyborg-build-v2.0;
-Update magisk root version:
-Latest Stable Magisk Version: v13.3;
-Latest Magisk Manager Version: v5.1.1;
-Optimize the brush machine script, brush machine humanization process.
---------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.07.28]:
-Change version: Flyme 6.7.7.21R Cyborg-build-v3.0;
-Update the release files for version Flyme 6.7.7.21R;
-Add xposed support,you have to install this zip by recovery : https://www.androidfilehost.com/?fid=745425885120750151
-Change the DPI-320 to DPI-420;
-Optimize the brush machine script, brush machine humanization process.
--------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.08.18]:
-Change version: Flyme 6.7.8.11IR Cyborg-build-v4.0;
-Update the release files for version Flyme 6.7.8.11IR;
>> function adjustment
• System
Clearly tell you that the lock on the page that thing, waiting for the next time you will be locked when you know
Charm blue 5 / charm blue 3 / charm blue U10 / charm blue U20 replacement for the bottom of the Android, charm blue metal / charm blue 2 / charm blue 2 telecommunications version of the follow-up adjustment
• Calendar
Birthday / Anniversary / Countdown Day, Female Ticket Rhapsody Hurry to record it so as not to kneel the keyboard
Path: Calendar - New event - more options
>> Problem improvement
• phone Guardian
Repair the virus killing into the scanning state did not stop after the phenomenon
Repair mobile phone thin with the virus killing the same after the start also stopped the phenomenon
Repair the use of security scanning scan ticket two-dimensional code after the phenomenon of garbled
Other
Repair in the "reading" in a section of the text after clicking to share to the QQ will prompt the picture does not exist
Repair long press the home key or by language to wake up the "voice assistant" can not be recorded after the phenomenon
--------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.10.01]:
-Change version: Flyme 6.7.9.22R Cyborg-build-v5.0;
-Update the release files for version Flyme 6.7.9.22R;
>> function adjustment
Function adjustment
Focus on optimizing the system resource allocation strategy, and comprehensively enhance the system stability and fluency
For the game scene for resource tilt, improve the game frame rate and performance during the game more fun
High frame rate mode automatically tighten the strategy to reduce the power consumption of mobile phones, reduce heat and so on
>> Problem improvement
• Camera
Repair open slow, open when the phenomenon of short black screen
• Video
Repair play local video and online video, there are Caton phenomenon
Resolve the problem that the video is still pushed after the push is pushed
--------------------------------------------------------------------------------------------------------------------------------------------------------
Download link:
---------------------------------------------------------------------------------------------------------------------------------------------------------
-[2017.07.20]: https://www.androidfilehost.com/?fid=961840155545583261
---------------------------------------------------------------------------------------------------------------------------------------------------------
-[2017.07.21]: https://www.adroidfilehost.com/?fid=817550096634787379
---------------------------------------------------------------------------------------------------------------------------------------------------------
-[2017.07.28]: https://www.androidfilehost.com/?fid=817550096634788959
---------------------------------------------------------------------------------------------------------------------------------------------------------
-[2017.08.18]: https://www.androidfilehost.com/?fid=889764386195923711
---------------------------------------------------------------------------------------------------------------------------------------------------------
NEW-[2017.10.01]: https://androidfilehost.com/?fid=817906626617934764
Thanks:
-Flyme group: https://github.com/FlymeOS/flyme-release
-Lineageos group: https://github.com/LineageOS
-Magisk group: https://forum.xda-developers.com/apps/magisk
-Exynos 5420 Team: https://github.com/exynos5420
-Other people who are not listed but who make efforts.
Wow, amazing. Thanks for sharing.Could it be installed on T700??
Enviado desde mi Redmi Note 3 mediante Tapatalk
alberbrando said:
Wow, amazing. Thanks for sharing.Could it be installed on T700??
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
After a lot of user testing, Flyme6 rom can be applied directly to the T700, without any modification (of course,
T700 does not use the call function)! The specific installation is as same as the T705).
Telephone is good, data is good, can accept text message but cannot send text message
i will try to port it for t700 shouldnt be hard as i have ported a lot of roms from other devices to t700 but it will be online quite late cuz i have 0.1mbit upload
TimurAlaskara_TR said:
i will try to port it for t700 shouldnt be hard but it will be online quite late cuz i have 0.1mbit upload
Click to expand...
Click to collapse
Great,Timur.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Is this rom based tw or aosp ?
Envoyé de mon SM-T705 en utilisant Tapatalk
aumast said:
Is this rom based tw or aosp ?
Envoyé de mon SM-T705 en utilisant Tapatalk
Click to expand...
Click to collapse
Based on lineageos 13.0
acui said:
Telephone is good, data is good, can accept text message but cannot send text message
Click to expand...
Click to collapse
Yes, but the message is not to send a failure, only to show "send failure" on T705, in fact the other person has received your message.
TimurAlaskara_TR said:
i will try to port it for t700 shouldnt be hard as i have ported a lot of roms from other devices to t700 but it will be online quite late cuz i have 0.1mbit upload
Click to expand...
Click to collapse
It's nice to see that you can prot it to T700, but you have to be aware that some bugs might not be fixed, because this flyme version is a beta version ！
Good luck!
yang_w said:
It's nice to see that you can prot it to T700, but you have to be aware that some bugs might not be fixed, because this flyme version is a beta version ！
Good luck!
Click to expand...
Click to collapse
yep i have used flyme os 6 on s7edge and s3 noth were crap
we need to wait for future builds
fixed flashing error...
that was fast!...wow (understand was under development already) thanks...downloading now
---------- Post added at 08:16 PM ---------- Previous post was at 07:44 PM ----------
getting some symlinks faliked error 7 in updater process (error installation) - this is for twrp 3.1.1 and did full wipe (system, cache, data, dalvik/art cache before flashing.
fixed flashing error 7
reboot recovery
go to mount panel and uncheck cache
then full wipe (if not done already) then flash the zip
booting now...
---------- Post added at 08:56 PM ---------- Previous post was at 08:16 PM ----------
yang_w said:
Sorry, it does not work with T700 because I only have T705. But I believe flyme6 can be used on the T700, provided that there is a developer to adapt it
Click to expand...
Click to collapse
tried v2 on my T705M (705 Latin American version) ..calls work (no reboots no sound issues-except other caller/person at other end of line can hear his sound (slight)..common issue on many CM/AOSP in my experience for some of these tablet phone devices (not the pure smartphone devices - think something to do with mic and internal speaker arrangement)...however tab A 7.0 T285 CM 13/14 has no such issues not sure why (is a 7 inch tablet phone device) so not sure
anyway you have my report on the calling function-maybe someone else has some more ideas/insight or different experience..thanks
Thank you for some feedback on the call function, which will give some reference to other users. In fact, after the test, in my T705 (TGY Hongkong, China) on the call function is very perfect, but the Mms function will be some problems, I have not found a solution to the problem.In fact I have only one Nano Sim card, but it is applied to my Iphone 7plus, so testing these features will be more difficult.
--About Flash this flyme6 rom:
This Flyme6 is based on lineageos13 production, so it is best to flash los13 / cm13 first, and then flash flyme6, this Introduction may avoid some mistakes. If you did not flash los13 / cm13 before, you may need to FULL WIPE, and then brush into flyme6, of course, I did not test this operation.
i can confirm that this rom is also working verrrryyy well on t700 without any extra bugs. i flashed this rom over full aosp 7.1.2. it has still got all these stabdard flYme os bugs on board. another thing is that it is based on a phone ui and it needs some optimization for tablets just like i did on my old sucuk rom for tab s.
future builds without flyme os bugs would make it possible to use this as a daily driver
yang_w said:
Thank you for some feedback on the call function, which will give some reference to other users. In fact, after the test, in my T705 (TGY Hongkong, China) on the call function is very perfect, but the Mms function will be some problems, I have not found a solution to the problem.In fact I have only one Nano Sim card, but it is applied to my Iphone 7plus, so testing these features will be more difficult.
--About Flash this flyme6 rom:
This Flyme6 is based on lineageos13 production, so it is best to flash los13 / cm13 first, and then flash flyme6, this Introduction may avoid some mistakes. If you did not flash los13 / cm13 before, you may need to FULL WIPE, and then brush into flyme6, of course, I did not test this operation.
Click to expand...
Click to collapse
yes just noticed today that the lineage 13 is needed to flash first (I did not do this-had a custom MM stock-based rom before this, then did the full wipe and directly went to the flyme package) Will do the stated method in the original post OP thanks
TimurAlaskara_TR said:
i can confirm that this rom is also working verrrryyy well on t700 without any extra bugs. i flashed this rom over full aosp 7.1.2. it has still got all these stabdard flYme os bugs on board. another thing is that it is based on a phone ui and it needs some optimization for tablets just like i did on my old sucuk rom for tab s.
future builds without flyme os bugs would make it possible to use this as a daily driver
Click to expand...
Click to collapse
Please share your build for t700
U don't need to port t705 ROMs to t700 .. They usually work without any edit.
U can also flash it without flashing lineage before
Linage (cm) has hardware issues with the t705 requiring some rewrite of the device tree, since the devs are busy with N this most likely will not be solved at all. These issues effect fingerprint sensor, mic, and battery drain ( in some cases a rouge process clocks the processor at 40% continuously ).
All ROMs using Lin/cm codebase ( and the deathly kernel obviously ) will share the same probs in part or in whole ( exception to this is vanir who do a lot of their own work on top of the cm codebase ).
This ROM is the same, a bunch of commits put on top of a very shaky base.
I am working on a solution but it will be aosp based since they have the only fully operational ( as regards to hardware ) implementation (have reposted it ), some mild kangs on top of the already working code.
PS. The unofficial cm13 build at XDA has solved some of the bugs ,being outside of the official cm13 branch, fingerprint and others still there.
TimurAlaskara_TR said:
yep i have used flyme os 6 on s7edge and s3 noth were crap
we need to wait for future builds
Click to expand...
Click to collapse
Hello, TimurAlaskara_TR. Can you tell me how to port it to the T700? There are already many people who need T700 flyme6. If you tell me the way, I will modify and upload to AFH.
To port it too t700. A t700 will be required. Thats all. Although the t705 version may flash as is to t700
FlymeOS Rom for Redmi Note3 pro (SD)(kenzo + kate)V6_7.10.20R-beta from by haohao3344 Android 6.0
What's working :
Boots
Camera
RIL
Wifi
Bluetooth
Video Playback
GPS
Audio ( Record and Playback )
Camera ( Videos )
Sensors
FingerPrint
Leds
Volte 4G
What's not working:
missed calls and incoming messages does not arrive
at the number of application notifications
Please feedback to [email protected], [email protected], [email protected]
Loading instructions:
1- Firstly, the device must be rooted and TWRP installed.
2- Download the FlymeOS Rom.zip version + SuperSU.zip, gapps + Titanium Backup Pro-v8.0.2.apk files you want to load from the links and copy them to the external SD card.
IMPORTANT NOTE: Kate will copy the extra miui_HMNote3ProtwGlobal_7.10.19_Firmware baseband file to the external SD card for a smooth operation.
3. Back up your Rom external SD card.
4 - TWRP den 4 lü wipe called Dalvik Cache + Cache + Data + System. (Internal SD not marked)
5- At TWRP, go back to Install and flash the FlymeOS Rom.zip version + Gapps file.
7. When Kate devices are in TWRP for the baseband, go back to Install and flash the extra miui_HMNote3ProtwGlobal_7.10.19_Firmware file.
The device is Root but still prefer to flash SuperSU.zip. When the process is finished, click the bottom left wipe cache and Reboot.
Boot 20 to 30 minutes do not rush speed. (For contacts, make your Gmail synced)
Flyme_Redmi-Note-3_haohao3344_6.7.10.20R-beta
Download link: http://www.dosya.tc/server10/klmagp/e_Redmi-Note-3_haohao3344_6.7.10.20R-beta.zip.html
Published: 10/26/2017. TWRP will not corrupt File fixlidir.
SuperSu link: http://s5.dosya.tc/server5/3mtidz/SuperSU-v2.82-201705271822.zip.html
Gapps link: arm64-6.0-pico: http://s5.dosya.tc/server5/jdjry6/open_gapps-arm64-6.0-pico-20171103.zip.html
Extra for Kate devices: miui_HMNote3ProtwGlobal_7.10.19_Firmware
(Do not install kenzo devices!)
http://s4.dosya.tc/server5/ebc51s/miui_HMNote3ProtwGlobal_7.10.19_Firmware.zip.html
After installing the device, install Titanium_Backup_Pro-v8.0.2.apk and uninstall unwanted Chinese applications.
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup
There is no Turkish on the keyboard, instead, the Xperia ™ keyboard with Ethnic master's tempo replaced. Install the keyboard and choose Xperia from the language and clock application.
https://forum.miuiturkiye.net/dosyalar/xperia-klavye-apk.10682/
You can also use fingerprints if you introduce fingerprints to use lockups
Why try FlymeOS:
Flyme OS V6 also uses "One Mind"!
China-based smartphone maker Meizu announced that it will use open source Android-based Flyme OS 6 as its operating system. The operating system integrated with "artificial intelligence" "One Mind" has a different interface than all other Android operating system phones. Both the desktop and the backplane have serious differences and Flyme os 6 aims to come to a special place, taking advantage of the flexibility of Android.
I am using this romance for now and
*** We will wait for the Rom a work with "artificial intelligence" support at XIAOMI ***
Orginal porting links: http://www.flyme.cn/firmwarelist-51.html#7
Rom users [kaizenTR] test Fan page: https://forum.miuiturkiye.net/konu/...3344-for-redmi-note3-pro-sd-kenzo-kate.18020/
See the following link for user [kaizenTR] screenshots: https://forum.miuiturkiye.net/konu/...3344-for-redmi-note3-pro-sd-kenzo-kate.18020/
Sorry my not good at English
No offence but do u have permission to share rom by Original Dev
Volte working
MIHIR465 said:
Volte working
Click to expand...
Click to collapse
yes if u want to confirm just go to the official thread which was made by haohao
Criston said:
No offence but do u have permission to share rom by Original Dev
Click to expand...
Click to collapse
I have not seen any ban on the published sites
because earlier versions have already been released for kenzo
Criston said:
yes if u want to confirm just go to the official thread which was made by haohao
Click to expand...
Click to collapse
Ok thanx
My volte doesn't work i have kenzo so tell me which firmware i should flash
hajik2029 said:
My volte doesn't work i have kenzo so tell me which firmware i should flash
Click to expand...
Click to collapse
follow this link: [Firmware] Redmi Note 3 Pro [Kenzo/Kate]
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
ahmet ferid said:
follow this link: [Firmware] Redmi Note 3 Pro [Kenzo/Kate]
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
Click to expand...
Click to collapse
But for flyme os which is the firmware i need for volte?!
Sent from my Redmi Note 3 using XDA Labs
hajik2029 said:
But for flyme os which is the firmware i need for volte?!
Sent from my Redmi Note 3 using XDA Labs
Click to expand...
Click to collapse
Rom made for kenzo. my device kate and i can use it as 4g. Look to SS, write 4G
Download links for Kenzo only : Global stabil
8.5.7.0: https://androidfilehost.com/?fid=889964283620761246
0r
Download links for Kenzo only : Global DEv
7.11.2: https://androidfilehost.com/?fid=673791459329058563
If this is not the solution, review xda links for volte https://forum.xda-developers.com/redmi-note-3/development
ahmet ferid said:
If this is not the solution, review xda links for volte https://forum.xda-developers.com/redmi-note-3/development
Click to expand...
Click to collapse
Anyway Thanks for helping
hajik2029 said:
Anyway Thanks for helping
Click to expand...
Click to collapse
Could this patch be the solution?
VolteFix by jamflux.zip
for the Xiaomi Redmi Note 3 Pro(kenzo), by jamflux
https://androidfilehost.com/?fid=889964283620761693
if you want try it.
If there is a solution please provide please give information for I will be add
Rom is smooth as hell. But cant see images saved in sd card in the gallery app
SeanRex said:
Rom is smooth as hell. But cant see images saved in sd card in the gallery app
Click to expand...
Click to collapse
I am not living any problems with it. maybe you need to do wipe cache.
ahmet ferid said:
Could this patch be the solution?
VolteFix by jamflux.zip
for the Xiaomi Redmi Note 3 Pro(kenzo), by jamflux
https://androidfilehost.com/?fid=889964283620761693
if you want try it.
If there is a solution please provide please give information for I will be add
Click to expand...
Click to collapse
Report if it works
Guys volte option is off by default. Turn it on
Add some screenshots to the Topic please help when choosing between testing or not
SeanRex said:
Guys volte option is off by default. Turn it on
Click to expand...
Click to collapse
yes you are right
nairaldo said:
Add some screenshots to the Topic please help when choosing between testing or not
Click to expand...
Click to collapse
I write above I add all of them
See the following link for user [kaizenTR] screenshots: https://forum.miuiturkiye.net/konu/f...zo-kate.18020/
and I've tried I can not do it here bro
not added after first publication on page or I can not found
NB: I AM NOT RESPONSIBLE FOR BRICKING OF YOUR DEVICE OR ANY DAMAGES. Please do instructions correctly and if you like it gave me a like
Friends am hear to introduce best rom.
I have tried a number of ROM and i finally i find the best. It is nothing but the H2OS (OxygenOS). It has best inclass performance, stability and everything i wanted. It is based on Android 7.1.1
Hear am going to introduce the steps you have to follow on installing this rom.
1: flash the rom (dont flash gaps),flash the kernal and camera blobs.
2:boot for 1st time
3:reboot recovery and flash gaps (arm 64 -7.1)(i recommend nanno)
4: go to settings and enable google playservices.
5: install android webview.
6:install google service framework (version 7.1.1)
7:if neede remove the Chinese boltes (you can do it through twrp file manager after mounting system)
8: Thats it you are ready to go.
Enjoy the fluid experience of oneplus device
Links:
Rom: https://drive.google.com/file/d/0B2ENISrKPkKqSWloMzFQQXZ6dUk/view?usp=drivesdk
Kernal & camera blobs download from her :
https://forum.xda-developers.com/lenovo-zuk-z2/development/update-simple-update-blobs-t3655017
Android webview:
https://www.apkmirror.com/apk/google-inc/android-system-webview/
Google service framework 7.1.1:
https://www.apkmirror.com/apk/googl...ervices-framework-7-1-1-android-apk-download/
(All the credit go for developers i just collect everything together to make it best)
Wow!! But who is the Developer? Is this Alive In development??
Actually i get it from zuk Europe fan
Dhinesh1999 said:
Wow!! But who is the Developer? Is this Alive In development??
Click to expand...
Click to collapse
The dev is YoulinW he is chineese .rom update i think yes because he have old version and still develope this rom
Sent from my Z2 Plus using Tapatalk
mouadh97 said:
The dev is YoulinW he is chineese .rom update i think yes because he have old version and still develope this rom
Click to expand...
Click to collapse
Great
JIT05 said:
Great
Click to expand...
Click to collapse
What is battery life mate
Three is a newest version available. You can download it from the club.lenovo.cn. This rom is great. Im using it with stock kernel.
Does offline charging works?
If so...
I am pretty sure it's based on top zui 2.5 as always
A port by chinese guy based on zui
* Pstt it's should be at general
Sent from my z2_plus using XDA Labs
Google apps does not work properly
What about magisk and Xposed support?
The newest version is based zui 3.1
is camera zuk based?
notifications zui style (crap IMO) or AOSP style?
no multilang either , could survive tho
https://www.youtube.com/watch?v=hlIXN2EaTgM
just saw this, looks good
This shouldn't be here but in general
Notification is aosp based. The rom is preroted with supersu but you can change it to magisk
can someone send the download link of the latest version
Google apps doesn't work.
Black_ice_Spain said:
is camera zuk based?
notifications zui style (crap IMO) or AOSP style?
no multilang either , could survive tho
https://www.youtube.com/watch?v=hlIXN2EaTgM
just saw this, looks good
Click to expand...
Click to collapse
the camera in that video seems to be aosp based, maybe snapdragon camera. the ZUI camera app in ZUI 3.1 is completely different
can someone post the updated link?
Google apps working fine.
[email protected] said:
Google apps does not work properly
Click to expand...
Click to collapse
Follow step property it will work
This rom is my daily driver for about an week.
Updated on 17th March 2019
I am not responsible for brick your devices, Please flash at your own risk, but i tested, i can help you save brick devices also, can contact me anytime at hangouts.
Note:
I developed this ROM and tested as well,
Change log: 17/03/2019
1: Synced latest Source
2: Embedded March 05 Security patch
3: Minor fixes with Mokee device Trees
4: NFC (please Check and confirm)
What's not working:
Please tell.
Hey Folks:
Always bring something new and different for Victara device,
Lineage MOS. 8.1.0 Unofficial (STABLE VERSION) for Victara Moto x2 2014 Developed by weibo.com/diyroms
Lineage Unofficial 8.1.0, developed by Montana team. link: https://github.com/montanadevelopment
Credits: All Montana Development Team
Credits: Micheal Chen and team for MOS (Moonlight OS, Lineage 8.1.0)
Dated: 03rd June 2018
Battery life is very very good in this stable version
What's not working
1: Pattern lock late response first time.
2: HDR (waiting for Fix)
Other you can tell
What's Working:
1:Almost everything you need for daily use
2: Video recording working
Other you can check and report bugs for improvement
What you need:
MOTO X2 2014 Victara device
( Unlocked boot loader having TWRP 3.2.1.0 old versions won't work for 8.1)
[GUIDE] (Please Read after point 5 with concentration)
1: Download ROM and Unofficial 8.1 Gapps nano or as your taste from below links
2: Open TWRP and prepare all internal storage backup and your NANDROID backup.
3: Open Wipe, Advance Wipe and Change file system and Format Data, system, Cache with ext4
This will erase all your data (If you are already at ext4 then no need to wipe with ext4)
4: Now in TWRP connect device with PC or have a OTG USB with files and copy files in internal storage i.e. ROM zip and gapps zip
5: Now flash ROM zip and reboot system and setup everything in Lineage setup
6: You will see some Chinese apps, You can remove them by Root uninstaller, this ROM is rooted by default.
7: Go to setting, developer options and click advance reboot.
8: Now reboot to Recovery and go to gapps and flash then reboot. (You must have latest gapps from opengapps.org or you will need to update play services manually)
Here you done.
Source: https://github.com/LineageOS/android/tree/lineage-15.1
Kernel: https://github.com/zahidmgsk/android_kernel_motorola_msm8974
Device Trees: https://github.com/zahidmgsk/android_device_motorola_victara/tree/mko-mr1
Vendor: https://github.com/TheMuppets/proprietary_vendor_motorola/tree/lineage-15.1
If any issue please ask me at G+ anytime
Download Link Lineage 15.1 Unofficial Gdrive 11.04.2019
https://drive.google.com/file/d/1Ql5xw9I_UlGUC6gfOKI9it-N-e7hVmqV/view?usp=drivesdk
Download Link for MOS. Stable Version 5.0 Dated 12.11.2018
https://mega.nz/#!5j4iyQzT!21w7uH3OoldpEB68Sh7jLTWFLKDQdyg9JEZxZhC2i84
Version 5.0 updated on 12.11.2018
GAPPS Official 8.1.0: LINK
https://opengapps.org/
ALL DONE HERE
i have already tested this ROM Very good battery and smooth ROM... as far as will get next Update then share according...
SEE YA...
Reserved and SS @Archangel try this
Did the NFC work?
ColorfulNight said:
Did the NFC work?
Click to expand...
Click to collapse
I don't think so, because still there js no fix for victara 8.1,
zahidm said:
I don't think so, because still there js no fix for victara 8.1,
Click to expand...
Click to collapse
Nice to see an actual LOS build! thank you. Did you included patches for Camera HAL1? Will test on weekend when i find some time.
bejunk said:
Nice to see an actual LOS build! thank you. Did you included patches for Camera HAL1? Will test on weekend when i find some time.
Click to expand...
Click to collapse
I sent all data to Chen you can check and verify if not than i can ask him to add in next build.
what does MOS stand for? I know Lineage "OS" is Operating System
renzs said:
what does MOS stand for? I know Lineage "OS" is Operating System
Click to expand...
Click to collapse
After L there is M so we made it MOS ?
Always on display
Does it support Always on display, I mean is there any setting to set ambient display to always on?
What about pixel style navigation bars?
Nirmal Rai said:
Does it support Always on display, I mean is there any setting to set ambient display to always on?
What about pixel style navigation bars?
Click to expand...
Click to collapse
Yes there is always on setting, and this is actual lineage source so no pixel style navigation bar.
Battery
Battery life if always on display enabled?
Nirmal Rai said:
Battery life if always on display enabled?
Click to expand...
Click to collapse
Yes i am using user awake display and i got about 3 hours 25 min of screen on time.
Hello, could you please provide the link for the source code?
Won't support multilanguage...
jeferson1979 said:
Won't support multilanguage...
Click to expand...
Click to collapse
Yes it is, please follow procedure property
zahidm said:
Yes it is, please follow procedure property
Click to expand...
Click to collapse
Im using pico gapps, and done all the recommended, will try with nano or mini
jeferson1979 said:
Im using pico gapps, and done all the recommended, will try with nano or mini
Click to expand...
Click to collapse
So you have no multi language support? You flashed ROM and Gapps together?
InnerSanctum said:
Hello, could you please provide the link for the source code?
Click to expand...
Click to collapse
Hey it's really easy to download build sources, but huge files you tried a Git hub?
zahidm said:
So you have no multi language support? You flashed ROM and Gapps together?
Click to expand...
Click to collapse
Do it step by step. with stock gapps, same result, the rom only shows english and chinese, gapps are on pt-br, but system still as reported.
Sorry for my bad english
jeferson1979 said:
Do it step by step. with stock gapps, same result, the rom only shows english and chinese, gapps are on pt-br, but system still as reported.
Sorry for my bad english
Click to expand...
Click to collapse
After flashing go to system, language and add a language and tell me how many languages are there..
And also try these gapps in link below..
https://mega.nz/#!BuJx0CQT!dt5SKKnWT5aFkvYPUkcn5vPI2AW0zK47r479pkqmtWk