Maybe any1 got any Idea?
Problem:
1. HomeButton does not work - i have a new one connected, no Funktion (just put the connector in, didnt open the Phone)
2. Went into Recovery from System -it worked before- did Factory Reset to clean (want to give it to the kids)
3. Does not boot - shows only "Kernel is not ...." and the Samsung Galaxy S5 + android Logo, as i would before getting the system up.
Tried:
Boot from SD -maybe sth wrong there?
Kies
Odin
ADB
Hope:
Windows starts connection Sound - sometimes
Kies did recognize sth - but could not connect
Again I am not able to do Volume Down/UP + Power + Home Button <-broken on Board?
Did read some Posts here and there, but always at any Point the Home Button is used.....
Any Ideas or Solutions welcome.....
(And i dont want to open the Phone since there is already a small crack in the corner)
Related
Hi, I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..
Install a new nhb rom and try again.
after a lot of fail attempts on flashing different roms and a lot of research, i found no way to unbrick my phone. so here are the simtoms :
1. the phone does not boot or load anything when i put the battery and try to start it normaly(it only vibrates).
2. i have tried already V+/- buttons + Pwr on button for pink screen etc. but no response from the phone.
3. i plugged the usb cable without the battery and i pressed the same key combo but still nothing, it only just vibrates.
4. i used a FAT32 2GB sd card with the dloader and i pressed the V+/- + the PWR on button but the updater never showed...
so i am still a bit confused of how can i fix this kind of brick....
extra info :
1. used to have stock rom, froyo but i cant remember the version...
2. twrp 2.5 not sure about the version
3. the pc recognises the phone as: Ideos USB Device (info from USBDeview)
bump up
How you bricked it would help a bit to troubleshoot.
I have a Samsung galaxy note 4 with stock android. My phone shut itself off while I was listening to pandora, and when I tried to turn it back on, it got stuck rebooting.
It gets to the Samsung splash screen, and no further. Even when I try to enter recovery mode using volume up + power + home, the splash screen appears with 'RECOVERY BOOTING..." in the corner, but it just reboots again.
I have tried turning the phone off completely using the power button, then turning it on again. I have tried removing the battery, letting it sit, and trying to restart again. I have tried charging it to see if that was the problem, but it's not. If I use volume down + power + home, I can get to the custom OS options, but I have not rooted my phone, so I don't know what the 'continue' options does.
How can I get my phone working again?
Turn off the phone. Enter download mode instead of recovery (volume down + home button + power) and open Odin on your PC and under AP add your .tar file (via Sammobile) and hit OK in order to get stock Touchwiz on your Note 4 again.
vasilyivanovich said:
I have a Samsung galaxy note 4 with stock android. My phone shut itself off while I was listening to pandora, and when I tried to turn it back on, it got stuck rebooting.
It gets to the Samsung splash screen, and no further. Even when I try to enter recovery mode using volume up + power + home, the splash screen appears with 'RECOVERY BOOTING..." in the corner, but it just reboots again.
I have tried turning the phone off completely using the power button, then turning it on again. I have tried removing the battery, letting it sit, and trying to restart again. I have tried charging it to see if that was the problem, but it's not. If I use volume down + power + home, I can get to the custom OS options, but I have not rooted my phone, so I don't know what the 'continue' options does.
How can I get my phone working again?
Click to expand...
Click to collapse
hi
firstly ,
If you cannot "factory reset " in recovery ....then and if nothing else works ? and you don't want to take phone to service provider /Samsung service centre .............
last resort is to( but you have to know what you doing !!!!)
is to reflash your device /phone current stock ROM,(that you were on),with Odin /pc..laptop
If you are unsure "how to flash ?" i suggest to Google /search for an straight forward video ,on web /Youtube ?
if so and you can get into download mode ( phone off ,pull battery..... insert battery , volume down + power + home button ) When in download mode ,volume up again and follow normal procedure to flash your stock ROM with Odin
Remember ..that above to flash stock Rom with Odin ,you don't need root.
Also ,in your post above you refer i quote......
"I can get to the custom OS options, but I have not rooted my phone, so I don't know what the 'continue' options does"
i think what you actually mean that you can get into download mode ,???...................
and the volume up is when you" ready " to flash your device and connected to pc/laptop with Odin ...
Also make sure if you know how to reflash ..... that before reflashing with Odin ,you have ticked correct boxes in Odin( .....and how Odin works )
Bottom line ...if nothing else works ,
a reflash of your correct phone ( current stock ) Rom you were on ,should fix it .
good luck
Hi!
I have some interesting problem and I could not find any solution in web.
I have Samsung galaxy Tab 4 10.1 SM-T535 LTE.
For unknown reasons device went to "Device memory damaged" mode (white screen with blue notification) and only one button "Reset device".
Luckily this button to nothing (you can push on it as many times us you want - no reaction).
I tried to make soft reset (Power + volume down buttons) - no reaction.
Tried to lunch recovery mode (Power + volume up + home buttons), after that I get notification, that recovery mod is lunching, android error symbol appears (without any text) and device automatically reboots.
I tried to connect tab to PC, PC found the device, ODIN recognized it, but if I try to upload something, nothing is working (probably do to that, that I need to enabled download mode, but I cannot do it, because recovery mod not launching).
Maybe you have some suggestions.
Hello dear xda community
I have a px6 device from the company "Wondefoo" installed in my Mazda (without any hard buttons). It worked so far so good, but ZLink (Apple Carplay) didn't work, so I tried to fix this. To do that, I rooted the device, uninstalled the "ZLink" app and reinstalled a newer version. Then I tried to reboot. And then my problems started:
The device doesn't boot anymore. It tries to start up, I can see the Android 10 boot logo ("multi-media on-vehicle Navigation System" screen), but after about one minute, this logo disappears and the screen remains black.
OK, easy fix --> Just go into recovery mode and reset the device. But here's the big problem: I can't get into recovery mode.
Here's what I tried:
1. Ignition off and on --> Screen still black
2. Press "Reset" button (my device only has this one physical button) --> Boot process started again, but same outcome
3. Unmount the device, plug the power out, wait an hour, plug it in again and try again --> Boot process started again, but same outcome
4. Tried to connect with adb over Wi-Fi to the device (used the last known IP address) --> Connection timeout, Wi-Fi probably not started yet
5. Press&Hold "Reset" button until lights beign to flash to get into recovery mode --> Lights never flash because the "Reset" button somehow breaks the power circuit and when I release it, the device gets power again and boot process starts again with same outcome
6. Press&Hold "Reset" button for a minute, then release it, then press it again quickly within 1sec --> Boot process started again, same outcome
7. Tab with 5 fingers on the boot logo --> Nothing happened
8. Attached keyboard and pressed "Alt" + "PrintScreen" + "I" all the time --> Nothing happens. Keyboard is with RGB LEDs, so I saw it was active when the boot logo was displayed... Then, the LEDs on my keyboard turned off which was telling me that there is no keyboard input possible anymore
9. I even tried this: https://forum.xda-developers.com/t/new-method-enter-recovery-no-physical-buttons.4013453/ --> I just have one similar cable, not two as described in this post... So I put everything together again and just tried again --> Boot process started again, same outcome
Well... Is there any option left? I'm thinking about buying a USB male-to-male cable and try again with adb, but everyone tells me that I need to get into recovery mode first which I really can't
* Is there any other way to get into recovery mode? Maybe with my keyboard?
* Does anyone have another idea what I could try? Maybe without recovery mode?
Thanks in advance and cheers
T
As you said:
1. Ignition off and on
2.Have ready the needle for reset and do that instantly as you see the boot logo.
Once device restarted, wait until will see the boot logo again and pull out the ignition key.
3. Put in an USB socket a pen drive with the right firmware
4. Put back the ignition key and let it in ON position, without starting the engine. The update process will start, have a bit of patience until will finish. The device will restart at the end of the update, and straight after the boot logo, shortly press the reset button.
With a bit of luck, will have a fresh firmware on your device.
Thanks for your quick answer.
I tried what you said several times, but unfortunately I always end up on the black screen, no matter what I try.
My usb stick flashes quickly during the boot process, but nothing happens with it.
I also tried with an USB male-to-male cable and connect via adb, but it won‘t connect...
t-to-the-a said:
5. Press&Hold "Reset" button until lights beign to flash to get into recovery mode --> Lights never flash because the "Reset" button somehow breaks the power circuit and when I release it, the device gets power again and boot process starts again with same outcome
Click to expand...
Click to collapse
Are you sure you are holding the reset button for long enough?
On my machine (Dasaita) you hold the reset and the machine turns off... but you have to keep holding it even after it has turned off. Could be upwards of 1.5 minutes. Once the lights flash (and finished flashing), release and press one more time within 3 seconds.
Thank you for this idea. I have tried 30 seconds, but no more until today...
Now I tried with 1min, 2mins, even 3mins, but nothing happens.. I think the power is immediately cut as soon as I press the reset button. So there is probably no way to fix this easily
I also contacted the seller, but they have a talent to not understand my question. I just get answers like "press the reset button 2 sec and then everything is fixed" or "plug in the USB drive with the new ROM and press update" - of course that doesn't help.
Well I guess I'm left with one last thing: Throw this device away and buy a new one. Not from Wondefoo anymore of course, and hopefully with a working reset button.
I have the same issue. What did you end up doing?
Where did you buy your unit from?