ZTE Blade Apex 2 issue with TWRP - Blade General

Hello,
When I try to install the stock rom for this phone, twrp wont let me install It with the message "this package is for "msn8226" devices and this is "p892e10"".
Is there a way to install the stock recovery Mode or contact a twrp developer to fix this issue? Otherwise I dont seem tl find a way to unbrik this phone.:crying:

If you have the update.zip unzip It and copy recovery.img to your sd card, copy the update.zip file Too, now install the recovery.img in twrp selecting the recovery option, reboot your phone in recovery Mode again and install from external sdcard the update.zip file, just let It install It takes time, after installed, pick the reboot system option and wait until It start It also takes time.
Thats it

Related

Cannot access recovery

I really hope someone can help me out. I think I bricked my phone.
I tried to recover my phone back to stock with stock recovery so I can send it in for repair. When I installed 2.3.4 OTA update through zip, I accidentally clicked yes for updating 2.3.6. I didn't know, went to washroom and my phone won't boot. I thought no worries I'll install the zip again. Going into recovery, there's an android picture with an exclamation mark. I can't boot into phone and cannot load recovery. Someone please help >_<
download CWM and try to flash it through fastboot, and use that to flash a new img. im assuming you've done this before, having a custom recovery before now. if not, make sure you have fastboot setup, and if you don't go look through a rooting guide how to set it up then once you have it set up, move the new recovery you downloaded to the same folder as fastboot, then type
fastboot flash recovery name_of_recovery
of course replace the name_of_recovery with the exact filename of the recovery you downloaded. you can get the ClockworkMod recovery I think at www.clockworkmod.com
then boot into the new recovery and go to Mounts and Storage and Mount USB, and take the update.zip that you have and load it onto your SD Card, then go into the recovery and do as you would to flash the zip
Problem is, I don't think usb debugged was enabled. I tried to lock bootloader so I can just take it back to my carrier and say phone is screwed up, but when I tried, it said device not found.
The only way I think is using odin.

[Q] note 3 (n9005) bricked?

I just lately one day decided to update TWRP recovery. I downloaded img file and flashed it at the old TWRP. I rebooted the phone but just blue recovery boot text flashed quickly and it went to the Odin mode and there is red text: could not do normal boot. :crying:
So if I try normal boot it does that above. If I press recovery It does the same. I can still access Odin mode.
Is my device soft bricked or hard bricked? How can I get it work/unbrick it?
Lots of questions... I am pretty noob with these root/moding things, I hope someone could help me.
kaalilaatikko said:
I just lately one day decided to update TWRP recovery. I downloaded img file and flashed it at the old TWRP. I rebooted the phone but just blue recovery boot text flashed quickly and it went to the Odin mode and there is red text: could not do normal boot. :crying:
So if I try normal boot it does that above. If I press recovery It does the same. I can still access Odin mode.
Is my device soft bricked or hard bricked? How can I get it work/unbrick it?
Lots of questions... I am pretty noob with these root/moding things, I hope someone could help me.
Click to expand...
Click to collapse
You only have to follow the steps posted in TWRP page:
1. TWRP Install (Requires TWRP 2.8.4 or higher already installed):
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
2. Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into "download mode" and attach the device to your computer via a USB cable. Use the PDA/AP tab or button to browse to and select the tar file that you downloaded and flash the device.
SOLUTION: Reflash TWRP via 2nd step.
Joku1981 said:
You only have to follow the steps posted in TWRP page:
1. TWRP Install (Requires TWRP 2.8.4 or higher already installed):
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
2. Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into "download mode" and attach the device to your computer via a USB cable. Use the PDA/AP tab or button to browse to and select the tar file that you downloaded and flash the device.
SOLUTION: Reflash TWRP via 2nd step.
Click to expand...
Click to collapse
Thanks a lot guy! It works now. I thought it would be something like that but I wasn't sure. I am very thankful because I am still teenager and note 3 means very much to me. :victory:

[HELP] File Zip

Hello everyone
could someone help me? I was stuck in recovery twrp, and I would need a zip file for reflesh stock recovery to reinstall the original fw
thanks
i try it with adb sideload but the img file doesn install
recovery.img
Here http://huaweip8.jniklast.bplaced.net/recovery.html you can find the P8 (GRA-L09) Stock Recovery (B132) and P8 (GRA-UL10) Stock Recovery (B720/5.1.1 BETA)
thanks but the stock recovery.img i have it, the problem its how i flash it from twrp? i need zip file for flash it....
thx
Boot in fatsboot and flash it with adb.
All you need
iaio72 said:
Hello everyone
could someone help me? I was stuck in recovery twrp, and I would need a zip file for reflesh stock recovery to reinstall the original fw
thanks
i try it with adb sideload but the img file doesn install
Click to expand...
Click to collapse
Hi! All the files you need is here http://www.mediafire.com/download/qgc3i88dvlmmcl8/ROOT+HUAWEI+P8.rar
It has cwm recovery and stock recovery. Just open the .bat file and plug your phone to your pc.
It will pass cwm recovery, re-root your device, and at the end it will pass automatically the stock recovery for not to lose updates.
*No need to open by yourself command propf etc
I had problem with twrp recovery too, my phone stucked there. So i found this way

[zenfone z00ed] can't load invalid boot image

Hello, i have a problem with this device zenfone z00ed. When i turn on i saw the procedure of upgrade, but stuck ad 24%. So i try to go to recovery mode but not work, only in fastboot. I try to push recovery image or boot but i get error (seems is not signed). However i have a idea (maybe bad idea) i reset all with fastboot -w.
After it i try to turn on, but i have bootloop with logo asus. So i found the right recovery image, and i go to recovery for push via adb the file http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.73637138.1491728547.1480409858
But not work , so i copy the file into the microsd and the phone installed the firmware , after it i get the error : can't load invalid boot image
What can i do?
Flash the .43 recovery image then go to stock recovery and try to update from SD card the .44 version from your link.
And make sure your file isn't corrupted.
Thanks for reply. Well i try as you tell me. I used another microSD. So i downloaded the .43 on the web site. Put into the microSD and into the phone. Hard reset and installed the new update file. Reboot. ... Same problem. Hard reset. Same problem. I used another more old update zip from the website. Same problem. Maybe i Need to flash another file? Is strange that problem. The boot-loader isn unlock (however)
How did yout flash the recovery and boot image?
Recovery im sure..like fastboot flash recovery recovery.img...
However.. i follow another istruction to fastboot with twrp (not flash) so i unlocked the boot-loader. After if the phone reboot and automatically works. For now.
Atleast you can use your phone now
Use adb sideload via asus recovery

[Revert] Fully Stock Rom From Twrp [Le 2]

Hello Guys Welcome
To Revert Your Phone To Stock Firmware Follow This Things
Code:
I Am Not Responsible For Anything Goes Wrong
Download This File 21s beta rom = https://goo.gl/rnDxcC
Rename This File To Update.zip And Paste It On /internal storage/"paste Here Update.zip"
First Go To Twrp And Wipe Select everything except and wipe everything expect internal storage now flash this Recovery
1. Tutorial To Flash Recovery From Twrp
(Go To Install And Click On Image Select Install Image And Go To Foldet Where You Downloaded Recovery Exp. I Downloaded in ucdownloads then i'll go install and ucdownloads then i select recovery.img and now swipe to install image )
Now Go To Reboot Menu And Press On Recovery (now Your Phone Boot Into Stock Recovery
Now Click on update package from internal
Now it will start updating ur phone!
First Boot May Take 15 - 30 Minute
Thanks Enjoy!
recovery shows chinese characters which i cant understand ... plz guide which button to press or give any link to english recovery...
anupam_luv said:
recovery shows chinese characters which i cant understand ... plz guide which button to press or give any link to english recovery...
Click to expand...
Click to collapse
I know this is old, but I tried the same today.
You just have to press the blue button on right bottom.
Also make sure that the update.zip in root has no capital letters. I used capital U in update.zip name. And it didn't recognize it.
Here's a video, where I saw the translation:
https://www.youtube.com/watch?v=JjvlZ7in5yU
iShubham said:
I know this is old, but I tried the same today.
You just have to press the blue button on right bottom.
Also make sure that the update.zip in root has no capital letters. I used capital U in update.zip name. And it didn't recognize it.
Click to expand...
Click to collapse
I just did this and now stuck on the boot logo (Leeco - Share the Eco World)
I tried getting back into the stock recovery and wipe stuff again but its staying on the boot logo.. any ideas?
Sithquest said:
I just did this and now stuck on the boot logo (Leeco - Share the Eco World)
I tried getting back into the stock recovery and wipe stuff again but its staying on the boot logo.. any ideas?
Click to expand...
Click to collapse
Flash lazy flasher after flashing the stock ROM. That will do it
stuck in eui logo...
I changed the twrp recovery to stock recovery via "minimal adb and fastboot" through pc....before that
I wiped everything and internal storage and I put update.zip file in root directory....After installing stock recovery(dnld by the link provide) (link of post https://forum.xda-developers.com/le...k-rom-twrp-t3663504/post73561122#post73561122 )
And also places the rhi rom in root directory....After enter into stock recovery mode.....It shows something in chinese ...And it's not installing update.zip
Plz help asap

Categories

Resources