Database Users

[WARNING] Xposed Feedback on stock 5.0.2 [POSSIBLE FIX FOUND]

I make this thread in order to help nailing down the problems with Xposed and new stock Sony Lollipop.
As everybody knows, Xposed is out in alpha for LP (5.0.2)
Some testing on Sony based stock roms reported that it will mostly brick your rom, forcing you to clear ART-cache every time you want to boot the phone.
If you won't clear the cache, the phone simply bootloops.
This happens only on SOME situations, on some other works.
Once you bricked the ROM, removing Xposed doesn't seem to help, you will have to wipe clean and reflash everything.
So be careful while testing Xposed.
You can post here your results or suggestions regarding this serious issue.
Any kind of log about the problem is appreciated.
EDIT: POSSIBLE FIX FOUND
** As always... TAKE A BACKUP FIRST! **
CappyT said:
I uninstalled a lot of (apparently) unuseful stuff, and my phone is now rebooting all ok.
Try uninstalling all google stuff except for store and framework (you can reinstall everything later from store)
Then remove some of the stuff you don't really need from the list here: http://forum.xda-developers.com/z3-compact/general/wip-debloat-lp-690-correct-functioning-t3076161
Hope it helps.
Click to expand...
Click to collapse

CappyT said:
I make this thread in order to help nailing down the problems with Xposed and new stock Sony Lollipop.
As everybody knows, Xposed is out in alpha for LP (5.0.2)
Some testing on Sony based stock roms reported that it will mostly brick your rom, forcing you to clear ART-cache every time you want to boot the phone.
If you won't clear the cache, the phone simply bootloops.
This happens only on SOME situations, on some other works.
Once you bricked the ROM, removing Xposed doesn't seem to help, you will have to wipe clean and reflash everything.
So be careful while testing Xposed.
You can post here your results or suggestions regarding this serious issue.
Any kind of log about the problem is appreciated.
Click to expand...
Click to collapse
It works ONLY if you deodex your rom
Sent from my D6503 using XDA Free mobile app

beniamin24 said:
It works ONLY if you deodex your rom
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
I heard of problems even if rom is deodexed in the z3 section...
Anyway, since no deodex is already out for Z1, we can't test it.

Here is Z3 thread http://forum.xda-developers.com/z3/development/lp-mini-deodex-t3076490. When CE1 will be available I'll do some tests and prepare deodex.

C6906 on stock FTF clean flash of 5.0.2.
Xposed worked fine for me, up until I flashed the "5.0.2. Memory Leak Fix" found on the repo in the Xposed app. Boot loop after enabling this and rebooting. Cleared both caches, got all the way until "starting applications" after it counted up the list of installed apps, then froze, and rebooted. Repeated the process forever. Could never get into a stable working environment to disable that hook.
Tried to remove the conf files in data/data/xposed/conf, but no luck.
Had to FTF Flash again, which I'm waiting on booting right now, to see if that fixed it.

Wiltron said:
C6906 on stock FTF clean flash of 5.0.2.
Xposed worked fine for me, up until I flashed the "5.0.2. Memory Leak Fix" found on the repo in the Xposed app. Boot loop after enabling this and rebooting. Cleared both caches, got all the way until "starting applications" after it counted up the list of installed apps, then froze, and rebooted. Repeated the process forever. Could never get into a stable working environment to disable that hook.
Tried to remove the conf files in data/data/xposed/conf, but no luck.
Had to FTF Flash again, which I'm waiting on booting right now, to see if that fixed it.
Click to expand...
Click to collapse
Same here. Tried in the same manner.
If someone is able to deodex the rom, I can provide the full system dump.

Before flashing the xposed framework i advise you guys to make a backup (recovery) of your system. This way if anything bad happen, just restore your system and you're good to go.
Sent from the future.

I suggest not to install xposed.......I bricked my z1 3 times.......now it's ok without xposed, maybe it's better if we wait for a more stable version for lollipop

CappyT said:
Same here. Tried in the same manner.
If someone is able to deodex the rom, I can provide the full system dump.
Click to expand...
Click to collapse
This seems to suggest to me that deodexing won't be a guaranteed fix:
https://github.com/rovo89/Xposed/issues/31#issuecomment-91374076
The good news is, rovo89 is aware of the issue. I can't tell if he got the logs he needed though.

araemo said:
This seems to suggest to me that deodexing won't be a guaranteed fix:
https://github.com/rovo89/Xposed/issues/31#issuecomment-91374076
The good news is, rovo89 is aware of the issue. I can't tell if he got the logs he needed though.
Click to expand...
Click to collapse
Deodex is confirmed to solve the issue, as tested on the Z2 section.
http://forum.xda-developers.com/xperia-z2/development/fix-xposed-bootloop-23-1-0-690-d6503-t3073129
Hope someone can help me with the deodex process...

I don't won't to deodex....I'll wait for a stable release of xposed

Been running Xposed all day with Gravitybox Module & Unicon. Tried lots of modules and rebooted lots of times. No bootloop issue. May I ask, are they using the latest version of Xposed? And how did the install Xposed? These Qs may lead to answers.
I am using the latest version both flashable zip files and apk. And I installed the apk first after first boot and the did a restore using TB then flashed the files on the flashable zip. I don't recommend installing mods before first boot.
I'm on a C6903 and using prerooted HK flashable zip with dual Recovery.
Here: http://forum.xda-developers.com/xperia-z1/development/lollipop-hk1276-794814-5-0-242r5d-t3080955

Fiso said:
Been running Xposed all day with Gravitybox Module & Unicon. Tried lots of modules and rebooted lots of times. No bootloop issue. May I ask, are they using the latest version of Xposed? And how did the install Xposed? These Qs may lead to answers.
I am using the latest version both flashable zip files and apk. And I installed the apk first after first boot and the did a restore using TB then flashed the files on the flashable zip. I don't recommend installing mods before first boot.
I'm on a C6903 and using prerooted HK flashable zip with dual Recovery.
Here: http://forum.xda-developers.com/xperia-z1/development/lollipop-hk1276-794814-5-0-242r5d-t3080955
Click to expand...
Click to collapse
Can you screenshot your list of modules? Because, some modules work. Some not.

CappyT said:
Can you screenshot your list of modules? Because, some modules work. Some not.
Click to expand...
Click to collapse
Only have 2 activated so far. Don't want any conflicts.

cingolat said:
I suggest not to install xposed.......I bricked my z1 3 times.......now it's ok without xposed, maybe it's better if we wait for a more stable version for lollipop
Click to expand...
Click to collapse
xposed worked find on my phone.
follow this method,
1. flash xposed-arm-20150308.zip via recovery
2. clear cache / ART
3. Reboot system , install XposedInstaller_3.0-alpha2.apk and soft reboot.
4. install xposed module and enable module.
5. go to framework menu and soft reboot
*** If your phone get bootloop , no need to flash whole firmware. just force shutdown your phone, ( hold Power button + vol up 5sec) , go to Teamwin recovery ( power on phone + vol up) , mount system - advanced - file manager, go to /system/ framework folder and delete XposedBridge.jar .

iedafarha said:
xposed worked find on my phone.
follow this method,
1. flash xposed-arm-20150308.zip via recovery
2. clear cache / ART
3. Reboot system , install XposedInstaller_3.0-alpha2.apk and soft reboot.
4. install xposed module and enable module.
5. go to framework menu and soft reboot
*** If your phone get bootloop , no need to flash whole firmware. just force shutdown your phone, ( hold Power button + vol up 5sec) , go to Teamwin recovery ( power on phone + vol up) , mount system - advanced - file manager, go to /system/ framework folder and delete XposedBridge.jar .
Click to expand...
Click to collapse
Note that some modules work, out of the box.
Try installing Intelli3g for example... if someone is able to do it and actually reach it without wiping cache, I will pay him a beer!
Fiso said:
Only have 2 activated so far. Don't want any conflicts.
Click to expand...
Click to collapse
Well, gravitybox is known to be working....

EDIT FOR DOUBLE POST: see upper post.

CappyT said:
Note that some modules work, out of the box.
Try installing Intelli3g for example... if someone is able to do it and actually reach it without wiping cache, I will pay him a beer!
Well, gravitybox is known to be working....
Click to expand...
Click to collapse
just now install , enable module and soft reboot , got it working

iedafarha said:
just now install , enable module and soft reboot , got it working
Click to expand...
Click to collapse
paypal address please, sending you a beer.

Guys I'm using xposed-arm-20150213b.zip it could be why.

[Gapps] Flashable Gapps and deodexed/zipaligned system app/framework

If you flash any gapps in Stock odex rom, then it will give disconnect error after reboot/auto sync error etc. So I am giving you two packages. Flash with custom recovery like cwm/twrp
1. First flash the deodexed_zipaligned_sysApps_framework_NokiaX2ds2.1.0.13flashable.zip
https://yadi.sk/d/nSBRjt5qiQQ7c
2. Then flash the gapps-custom-pico-4.3_signed.zip
https://yadi.sk/d/9NlC8ANFiQQCm
*** deodexed package is for stock version 2.1.0.13. Dont flash it in Custom roms like nokdroid(already deodexed and different system apk folder). Don't flash gapps package in a rom that already includes gapps.
Features:
1. Deodexed
2. Zipaligned
3. Minimal gapps with libs
4. Playstore 4.6.17, location manager(you don't need here maps location manager for network location)
5. No problem for auto sync.
6. No disconnect issue after reboot.
7. No self update of playstore.
**If you want to install the aosp browser with chrome sync you can follow this thread
http://forum.xda-developers.com/nokia-x2/general/aosp-browser-chrome-sync-stock-rom-t3153738
Plz hit thanks if it works and let me know if there is any problem.

Plz someone response if this works in your phone or not. I have only tested it in my ROM.

shafiaszad said:
Plz someone response if this works in your phone or not. I have only tested it in my ROM.
Click to expand...
Click to collapse
this works nicely. i tested it in my phone. still no errors and images load nicely :angel:

I'm use advanced Nokia x2 tools for deodex my Nokia stock rom 2.1.0.12 and flash your gapps but when I reboot my device, disconnect reboot still persist. Sorry my bad English

@jmmigo you have to use stock rom 2.1.0.13, and use my deodex package. That'show its working. I haven't tested with stock rom 2.1.0.12.

Thanks for the explanation

sorry but this is the most idiot package at all...why did u make it delet the whole system app file ? u could just replace everything there only....and play store have the same problem ..disconnect after reboot....and yes it s 2.1.0.13

@thebiggboss180, No u cant just replace. The Odex files must be removed, deleting system app folder simplifies the process. Dont know why its not working for you. For me, for the first commenter its working. But, I am waiting for more reviews. Anyway, saying something is idiot doesnt make you smart.

Does the deodex zip file work for 2.1.0.11 or not because I really hate the disconnect issue after reboot

Don't know, just try after taking a backup.

I flashed the deodex file and it work but when I rebooted my phone the play store app disappear

Worked
i dont know what others say.. but it worked for me.. yeh :laugh: :cyclops:

Help I flash this two using cwm, but when I reboot my phone it stuck on updating application. Good thing I have cwm backup

shafiaszad said:
If you flash any gapps in Stock odex rom, then it will give disconnect error after reboot/auto sync error etc. So I am giving you two packages. Flash with custom recovery like cwm/twrp
1. First flash the deodexed_zipaligned_sysApps_framework_NokiaX2ds2.1.0.13flashable.zip
https://yadi.sk/d/nSBRjt5qiQQ7c
2. Then flash the gapps-custom-pico-4.3_signed.zip
https://yadi.sk/d/9NlC8ANFiQQCm
*** deodexed package is for stock version 2.1.0.13. Dont flash it in Custom roms like nokdroid(already deodexed and different system apk folder). Don't flash gapps package in a rom that already includes gapps.
Features:
1. Deodexed
2. Zipaligned
3. Minimal gapps with libs
4. Playstore 4.6.17, location manager(you don't need here maps location manager for network location)
5. No problem for auto sync.
6. No disconnect issue after reboot.
7. No self update of playstore.
**If you want to install the aosp browser with chrome sync you can follow this thread
http://forum.xda-developers.com/nokia-x2/general/aosp-browser-chrome-sync-stock-rom-t3153738
Plz hit thanks if it works and let me know if there is any problem.
Click to expand...
Click to collapse
Its working on 2.0.1.3 or not?

papu-lashari said:
Its working on 2.0.1.3 or not?
Click to expand...
Click to collapse
Its working on 2.0.1.3

which recovery should i use ?

I want xposed framework on my a3 sm-a300h

I've been working on getting xposed framework to work for two months now. All I want is to install xposed framework on my sm-a300h. Can it really be that hard that it should take up all my waking time during two months to install it?????
My system has been deodexed by someone else, so don't ask me how he managed to make that work.
Tried to install TWRP by following instructions here!: http://forum.xda-developers.com/sam...overy-twrp-2-8-7-0-samsung-galaxy-a3-t3173382
Managed to get TWRP to work!
I had already installed XposedInstaller_3.0-alpha4.apk
With TWRP I tried to install this (Xposed framework):
xposed-v84-sdk21-arm.zip from http://dl-xda.xposed.info/framework/sdk21/arm/xposed-v84-sdk21-arm.zip
When I restarted I suppose I got a so called boot loop, I just see the Samsung logo over and over.
So my two questions are,
1. Why didn't it work to install Xposed Framework?
2. How do I get out of the boot loop and get the phone to work again? haven't made any backups.
Has anyone installed xposed framework on this model or should I sell the piece of s*t phone and try with some other phone???? I'm wasting my life trying to get this to work....
My head's just spinning trying to find information in different threads in here, I'm think I'm on the limit to having a nervous breakdown. As far as I can see there's no thread on how to install xposed framework on sm-a300h? Please, help. If I need to buy a new phone, just tell me what phone to buy, and how much it is and ill buy that phone instead...

I guess I have to flash a stock rom in order to get my phone working again?
I downloaded a stock rom from sammobile for my device, A300HXXU1BPA1_A300HUUBBPA1_BVO.zip but the only way I can flash a rom now is through odin, but odin doesn't take .zip files. So how can I restore my phone and flash the zip?
I tried the Wipe function in TWRP, but it doesn't work... Still boot loops.

I guess the mistake I did was flashing the wrong version of xposed framework for my device?
Which version should I use the next time i try?
Does this work for my device? http://forum.xda-developers.com/showpost.php?p=64900847&postcount=3681

helphelphelphelp said:
I guess the mistake I did was flashing the wrong version of xposed framework for my device?
Which version should I use the next time i try?
Does this work for my device? http://forum.xda-developers.com/showpost.php?p=64900847&postcount=3681
Click to expand...
Click to collapse
Instead of second guessing then getting frustrated and annoyed when it doesn't work. Why not just spend literally 2 mins and make a proper backup first then if there are any issues just restore it?
Whats the point in having a custom recovery and not using it's main feature?
You've only got yourself to blame for your errors and resultant frustration and anyone else reading this should also take note.
Anyway pet talk over.
You should be good with the link you posted.

ashyx said:
Instead of second guessing then getting frustrated and annoyed when it doesn't work. Why not just spend literally 2 mins and make a proper backup first then if there are any issues just restore it?
Whats the point in having a custom recovery and not using it's main feature?
You've only got yourself to blame for your errors and resultant frustration and anyone else reading this should also take note.
Anyway pet talk over.
You should be good with the link you posted.
Click to expand...
Click to collapse
Did everything again from the beginning, flashed a ROM from sammobile, flashed TWRP.
Installed XposedInstaller_3.0-alpha4.apk
Then I tried to install this version of xposed framework: http://www.arter97.com/browse/tmp/hsk/xposed/ using TWRP.
Then I got an error while installing xposed framework. The error message says i need to free up more /system space. arter97 recommends in his thread that you "debloat your current ROM installation via root access.", but how do I do that?
And when I tried to start the phone after trying to install xposed framework it went into a boot loop.
So then I tried to restore the backup in TWRP. Restore Failed.
Get this error: Cannot restore system -- mounted read only.
What now?

helphelphelphelp said:
Did everything again from the beginning, flashed a ROM from sammobile, flashed TWRP.
Installed XposedInstaller_3.0-alpha4.apk
Then I tried to install this version of xposed framework: http://www.arter97.com/browse/tmp/hsk/xposed/ using TWRP.
Then I got an error while installing xposed framework. The error message says i need to free up more /system space. arter97 recommends in his thread that you "debloat your current ROM installation via root access.", but how do I do that?
And when I tried to start the phone after trying to install xposed framework it went into a boot loop.
So then I tried to restore the backup in TWRP. Restore Failed.
Get this error: Cannot restore system -- mounted read only.
What now?
Click to expand...
Click to collapse
To restore your backup remove the check in 'SYSTEM partition read only' under MOUNT.
Make sure your rom is deodexed.
Install this via twrp: http://forum.xda-developers.com/attachment.php?attachmentid=3510616&d=1445173483
Install Xposed installer.
Done

if you bothered reading the xposed thread, you would've noticed that Samsung TouchWiz firmwares are not supported from the official xposed from rovo.
use this one from arter97/dkcldark. Keep in mind, this is for sdk21 (5.0), in case we ever get 5.1 (sdk22) or 6.0 (sk23), we wont need this one anymore.

with the dkcldark version you don't even need to debloat anymore;
I also made a tutorial some time ago; should be the same steps for this a3:
http://forum.xda-developers.com/samsung-a-series/general/tuto-xposed-odex-rom-yes-knox-0x0-t3316688/
anyway, you should read a lot first before even thinking about flashing something, and like said above, a backup is a must because even those who (think they) know what they are doing sometimes **** up

I`m using this without any issues.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
SDK22.
SDK22 means Android Lollipop 5.1.x.
SDK23 means Android Marshmallow 6.0.x.
ARM means the devices that are running arm32 operating system.
ARM64 means the devices that are running arm64 operating system.
Try this (at your own risk).
It`s better to flash or restore backup first and then install Xposed Installer App (as normal apk installation) and then flash this from TWRP.

[Q&A][FAQ][TW][N][7.0][SM-G935F/FD/K/L/S/W8] SuperMan/SuperStock-Rom

Hello guys, I open a Question and Answer Thread for all SuperMan Rom users, so even users under 10 posts can ask their questions here.
Below I added some basic Q&A stuff which can also be found at the main thread, if you have any question, read through them before posting, thanks!
In case you search for the changelog have a look: Changelog post
If you want to see my post with all useful links such as TWRP, magisk, xposed and more visit: useful post​
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader and modem. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G935F/FD/K/L/S/W8. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 820 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Q: Performance and battery is very poor even after clean install. What should I do now?
A: I assume you installed Xposed than, some modules can cause batterydrain and performance problems. So try to make a clean install of the rom WITHOUT xposed installed.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from superman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore SuperMan control settings after a clean base update, why?
A: Backup for SuperMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in SuperMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
Q: I enabled weather on lockscreen but I can't see anything...
A: You probably didn't setup or even installed samsungs weather widget. Without it weather on lockscreen won't work too. So reflash the rom with the widget installed this time and set it up.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Normally we can use the stock kernel to encrypt our device, but since the Android 7.0 Nougat update samsung makes a check kernel sides to block deodexed roms from booting. This means that even the stock kernel is build by me to disable knox and tima. So encryption won't work there and you have to encrypt your device after you set up your phone. After that go to settings, security, encrypt device. It may need some additional steps to work...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: No it does not! You will end up in a bootloop when you flash it on android N
Q: I selected xposed but now I don't see an app for it?
A: Maybe there went something wrong with installing the app to /data/app from my installer script. But xposed is actually installed only the app is missing, so head over to the download page of xposed app: Material Xposed Thread
Q: I selected xposed but the app shows not active or something else with xposed is not working.
A: This can have 2 reasons:
1. You have installed latest xposed version without installing magisk, magisk is required for most recent xposed version!
2. You used 86.2 xposed (which does not need magisk) but you did not install supersu. Since 86.2 does not use magisk to be systemless it uses supersu instead!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent 2.4.3 SuperStock Kernel
3. Flash Magisk V12
4. install latest Magisk Manager from playstore
5. Open Magiks Manager, go to settings
6. Enable MagiskHide, systemless hosts and systemless busybox
7. Reboot the phone and check safetynet!
Q: I got out of date binary issue?
A: Since Magisk V11.1 there is no need for phh root anymore. Everything is handled inside the MagiskManager apk!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: Even when I did not use xposed during my setup in rom I can't login to snapchat anymore!
A: Snapchat got updated and now detects even root access on your phone!
Q: What to do to login to snapchat then?
A: Clean install the rom without root and xposed and login to your snapchat, save the app with titanium backup, flash back xposed and root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Q: I want to discuss this problem a bit deeper. Should I do so?
A: Do that, but this has nothing to do with this rom, so please go ahead and post your experience here on this Snapchat Thread.
Questions about Kernels:
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: Synapse shows no UCI support!
A: Most comon issue is that no busybox is installed. Download the one from here: Latest busybox and flash it in recovery.
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.
Questions about Root:
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel, simply reflash your preferred root method and it will work again!
Q: I selected phh root but my phone tells me I am not rooted!!
A: There are two possibilities:
1. You have mixed supersu/phh with magisk.
2. You did not install phhs root app from playstore.
Q: I get a warning about binary out of date. Help!
A: That happens on latest Magisk V11.1. Reason: Root has fully moved into Magisk Manager, no additional app required. Uninstall phh or supersu apps and only use magisk!
Q: I want to use su hide on my phone, how to do so?
A: Both below variants are outdated, I recommend to use Magisk with its build in MagiskHide. Check the thread: Magisk Thread
Link to phh's hidesu: Phh's thread
Link to chainfires suhide: Chainfires thread

volte support
please help volte is not there i need that to make calls and sms

beinggamer97 said:
please help volte is not there i need that to make calls and sms
Click to expand...
Click to collapse
Flash your providers csc
Sent from my SuperMan powered SM-G930F

Tkkg1994 said:
Flash your providers csc
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
Thanks man after flashing that csc my volte is working

TouchWiz page effect
I've flashed Superkernel and selected moddedUI mod in Aroma installer. No matter which TouchWiz page effect I select within the Superman Control v2.0 app, the page effect just sticks to default effect.
Am I the only one with this issue?

Grafdude said:
I've flashed Superkernel and selected moddedUI mod in Aroma installer. No matter which TouchWiz page effect I select within the Superman Control v2.0 app, the page effect just sticks to default effect.
Am I the only one with this issue?
Click to expand...
Click to collapse
You have to reboot everytime you change a settings. Plus modded services plus modded launcher are needed

Tkkg1994 said:
You have to reboot everytime you change a settings. Plus modded services plus modded launcher are needed
Click to expand...
Click to collapse
Thank you Tkkg1994 for your quick reply, by the way your rom is awesome and I'd like to thank you for developing it! So yeah ive selected modded launcher plus services in Aroma, even after a reboot the page effect remains the same.
---------- Post added at 12:56 PM ---------- Previous post was at 12:33 PM ----------
Grafdude said:
Thank you Tkkg1994 for your quick reply, by the way your rom is awesome and I'd like to thank you for developing it! So yeah ive selected modded launcher plus services in Aroma, even after a reboot the page effect remains the same.
Click to expand...
Click to collapse
Disregard what I said, its working now for some reason...lol.
I had another thing to point out regarding the appearance of the corners of rounded UI, I think there might be a problem with the actual image transparency? I've attached image to point out. Click link below
https://drive.google.com/open?id=0B6CqBfmqPw5ebVhDbzgyamtmUU0

Grafdude said:
Thank you Tkkg1994 for your quick reply, by the way your rom is awesome and I'd like to thank you for developing it! So yeah ive selected modded launcher plus services in Aroma, even after a reboot the page effect remains the same.
---------- Post added at 12:56 PM ---------- Previous post was at 12:33 PM ----------
Disregard what I said, its working now for some reason...lol.
I had another thing to point out regarding the appearance of the corners of rounded UI, I think there might be a problem with the actual image transparency? I've attached image to point out. Click link below
https://drive.google.com/open?id=0B6CqBfmqPw5ebVhDbzgyamtmUU0
Click to expand...
Click to collapse
Good it works for you now
I don't see any issue on this (about the rounded ones)

Ok here's a couple of closeup images, to make it clearer.
https://drive.google.com/open?id=0B6CqBfmqPw5eT1NsVl9zaS1qZlk
https://drive.google.com/open?id=0B6CqBfmqPw5eSXRJRC02ZGUzajg
---------- Post added at 01:19 PM ---------- Previous post was at 01:03 PM ----------
Also, Tkkg1994, is there a way to restore the stock Data icon in the status bar? (LTE instead of the 4G)

Grafdude said:
Ok here's a couple of closeup images, to make it clearer.
https://drive.google.com/open?id=0B6CqBfmqPw5eT1NsVl9zaS1qZlk
https://drive.google.com/open?id=0B6CqBfmqPw5eSXRJRC02ZGUzajg
---------- Post added at 01:19 PM ---------- Previous post was at 01:03 PM ----------
Also, Tkkg1994, is there a way to restore the stock Data icon in the status bar? (LTE instead of the 4G)
Click to expand...
Click to collapse
See what you mean now thanks. Can't make it more "slighter" then I already did sorry
About the 4G this is csc related
Sent from my SuperMan powered SM-G930F

Tkkg1994 said:
See what you mean now thanks. Can't make it more "slighter" then I already did sorry
About the 4G this is csc related
Click to expand...
Click to collapse
Allright much thanks for your help, really appreciate it!

How to apply themes?
Hi there, first off thanks for the time spent developing the ROM and helping us out!
When I try to go to the theme section of the stock settings the app fc (stays for forced close right? Sorry, not being an expert here).
I'm quite a dark theme fanatic and I'd really like to get one for my S7 Edge.
Is there maybe something that I don't know?
Thanks
---------- Post added at 02:23 PM ---------- Previous post was at 01:55 PM ----------
il.pella said:
Hi there, first off thanks for the time spent developing the ROM and helping us out!
When I try to go to the theme section of the stock settings the app fc (stays for forced close right? Sorry, not being an expert here).
I'm quite a dark theme fanatic and I'd really like to get one for my S7 Edge.
Is there maybe something that I don't know?
Thanks
Click to expand...
Click to collapse
OK I found the issue (thanks to Tkkg1994 for having it answered to another user), I just debloated theme store when installing the ROM!

Cannot install Stock Kernel
Whenever i try to install Stock Kernel on 1.14 i got bootloop i tried many ways , without modded services, even full stock everything and nothing is working, superstock kernel works fine but just wondering why stock kernel on G935F is not

arbreton said:
Whenever i try to install Stock Kernel on 1.14 i got bootloop i tried many ways , without modded services, even full stock everything and nothing is working, superstock kernel works fine but just wondering why stock kernel on G935F is not
Click to expand...
Click to collapse
You can install it BUT without: Magisk, xposed and phh. This things only work on superstock/superkernel!!

Tkkg1994 said:
You can install it BUT without: Magisk, xposed and phh. This things only work on superstock/superkernel!!
Click to expand...
Click to collapse
I keep getting a bootloop , did a full wipe of everything and tried without super su or magisk or xposed but the stock kernel still not working, other kernels work flawlessly
SM-G935F

deleted

arbreton said:
I keep getting a bootloop , did a full wipe of everything and tried without super su or magisk or xposed but the stock kernel still not working, other kernels work flawlessly
SM-G935F
Click to expand...
Click to collapse
I tested before with stock and all works as it should. You use any root method?
Sent from my SuperMan powered SM-G930F

Hi there, I was testing the user section of the ROM, and anytime I switch to a different user (guest or newly created), I got a persistent "unfortunately IMS service has stopped working" every couple of seconds or less. Couldn't get a solution browsing forums, it seems that must be an app conflicting with the system, but I'm not that tech savvy to know for sure...
Thanks in advance if you know what's going on!

I've flashed v1.14.5 and the "briefing" panel on the homescreen has been replaced by "6thgear TWSwipe"? Is there a setting to have the briefing panel instead?

il.pella said:
Hi there, I was testing the user section of the ROM, and anytime I switch to a different user (guest or newly created), I got a persistent "unfortunately IMS service has stopped working" every couple of seconds or less. Couldn't get a solution browsing forums, it seems that must be an app conflicting with the system, but I'm not that tech savvy to know for sure...
Thanks in advance if you know what's going on!
Click to expand...
Click to collapse
Hello
Can you please attach some logcats for your problem. Thank you
Grafdude said:
I've flashed v1.14.5 and the "briefing" panel on the homescreen has been replaced by "6thgear TWSwipe"? Is there a setting to have the briefing panel instead?
Click to expand...
Click to collapse
Yes by using stock launcher
Sent from my SuperMan powered SM-G930F

Custom Rom For Samsung J2 (J200H) S7 Experience Custom Build

Hey There ...........
Introducing My New Rom : S7 Experience Custom Build
Built V1
Based On Stock 5.1.1 Lollipop Rom
Warnings :
1. You are now Void your Warrenty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….[/SIZE]
Features :
1. Only For J2 2015 3G Variants
2. Android 5.1.1 Lollipop
3. Based on latest J200HDDU0APE1/APJ3 firmware
4. Deodexed
5. Medium Deboalted
6. Zipaligned
7. Signed
8. PreRooted
9. Added Busybox,SU.d and Init.d Support
10. S7 Style Statusbar
11. S7 Music Player
12. S7 Themed Apps
13. Xposed Enabled Zip Added
14. All Apps Are Updated
15. Fx Root Explorer
16. Sony Movies Added
17. S7 Wallpaper
18. S7 Icons
19. S7 Sound And Bootanimation
20. And More ...
How To Install :
1. Download Zip file Of the Rom From Link Given Below
2. You Mast Have TWRP Recovery on your device.(Letest TWRP is Given In attachments)
4. Copy the S7 Experience Custom Build.zip toYour SD card
5. Turn off Your Phone And press home button+power+Volume up button at a same time
6. Aftar apearing TWRP recovery go to install and install S7 Experience Custom Build.zip file from sd card you downloaded before
7. Now reboot system and wait for approximately 5 minutes.
9. Now you are good to use this rom ......
[For Xposed Install xposed-v78.0-sdk22-arm-custom-build-by-wanam-20151116.zip after installing rom given in the attachments]
Downloads :
https://drive.google.com/open?id=0B0rTXdhaTd2MV2szTEYtQWVIeVU
Credits :
@ASSAYYED –for his best ever kitchen.
@ashyx - for his Twrp
@me - For building Rom
Contact Me :
On Facebook Only Send Massages
www.facebook.com/almamun512

Thanks
Nice rom the rom like realy galaxy s7 I very like this

Great work . I will soon test it By the way is there theme support and if not are you planning to do it????

ad. said:
Great work . I will soon test it By the way is there theme support and if not are you planning to do it????
Click to expand...
Click to collapse
Actually Theme Option Is Enabled But Its Not Change Everything, I Dont Know Why, But thing Is Our Framework Doesn't Suppot That.

almamun512 said:
Actually Theme Option Is Enabled But Its Not Change Everything, I Dont Know Why, But thing Is Our Framework Doesn't Suppot That.
Click to expand...
Click to collapse
ok but my phone stick in bootlogo when i tried to install xposed it said unable to mount system ?????? what to do

ad. said:
ok but my phone stick in bootlogo when i tried to install xposed it said unable to mount system ?????? what to do
Click to expand...
Click to collapse
Did You clean Insall It ?
Do Wipe/Advance Wipe/system,data,delvik,catch
Then Install
Make Sure Your Device Is J200H 3g

almamun512 said:
Did You clean Insall It ?
Do Wipe/Advance Wipe/system,data,delvik,catch
Then Install
Make Sure Your Device Is J200H 3g
Click to expand...
Click to collapse
I tried both clean and dirty flash but no sucess ...
I got where the problem is...
system is not being fully extracted . There lacks many folders like priv-app in system partition .
I installed another zip file and noted that every thing is working well the system got fully extracted.
Maybe the problem is in updater-script Hope you can fix it soon

Will it wrk on j200g?

ad. said:
I tried both clean and dirty flash but no sucess ...
I got where the problem is...
system is not being fully extracted . There lacks many folders like priv-app in system partition .
I installed another zip file and noted that every thing is working well the system got fully extracted.
Maybe the problem is in updater-script Hope you can fix it soon
Click to expand...
Click to collapse
Can you send me a picture of the error or something.
There Should be no problem in updater-script
Also send me your about devices screenshot

almamun512 said:
Can you send me a picture of the error or something.
There Should be no problem in updater-script
Also send me your about devices screenshot
Click to expand...
Click to collapse
http://imgur.com/GYMLjJL
here's the ss about phone and i cant send picture of error but I'm sure the problem was caused due to the problem in system
The flashing had went smoothly but when i tried to boot to system i got atuck at samsung galaxy j2 screen and on checking system via twrp file manager i gound ther lacked different things.
I don't know if its the problem of my twrp or else I'm thinking of giving one try to flashify

ad. said:
http://imgur.com/GYMLjJL
here's the ss about phone and i cant send picture of error but I'm sure the problem was caused due to the problem in system
The flashing had went smoothly but when i tried to boot to system i got atuck at samsung galaxy j2 screen and on checking system via twrp file manager i gound ther lacked different things.
I don't know if its the problem of my twrp or else I'm thinking of giving one try to flashify
Click to expand...
Click to collapse
What Rom Are U Using Stock ?
I Dont think so.
Anyway Its strongly Recommended to be on letest Stock Rom Before Flashing My Custom Rom.
Nobody Having this Problem Like You.
And Use the TWRP I gave in attachment.

Not working....
Sent from my SM-J200H using XDA Free mobile app

wow this rom is better than i expected

in twrk recovery i got msg regarding it succeeded. but after that my mobile is still booting showing samsung j2 android. pl help me.

finally got it
Best rom out till date.
thanks @almamun512

No superuser access
I flashed this custom rom today and i like the new UI. But there is no superuser preinstalled although it said installing superuser when flashing the rom. I also installed supersu later using twrp but it says " Your device is unrooted."
How can i install superuser and gain root access ?

Nikeshsml said:
I flashed this custom rom today and i like the new UI. But there is no superuser preinstalled although it said installing superuser when flashing the rom. I also installed supersu later using twrp but it says " Your device is unrooted."
How can i install superuser and gain root access ?
Click to expand...
Click to collapse
I didn't experienced that problem. The phone was rooted only SuperSU app was missing which I installed.

Good day sir. I appreciate your hardwork creating the rom. :good: Will it work on a j200bt rom?

GREAT ROM
Beautiful Rom and fast but the problem i faced was the wifi reconnecting every 2 minutes and cant customize the rom by apps like gravity box ....
battery is friendly and i hope to make update for this vertion of S7 because the S8 Randomly restart without any reason
thanks a lot from my heart .

Rom can be flash in samsung J200GDDUZAQF6
PLEASE REPLY ME