Database Users

[GUIDE] How to Create Custom Splash Screen (Boot Logo) for Zuk Z2/Z2 Pro

Note:
This is not bootanimation, this is the splash screen (the 'Zuk' boot logo which is displayed when device is switched ON)
This is for ZUK Z2 / Z2 Pro Only ..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Zuk Z2/Pro (any ROM)
2. Terminal Emulator app installed.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
It's not yet tested by anyone.
1. Make sure you have a 1080x1920 picture in PNG format.
2. Download & Extract this: Zuk_Z2_Splash_Logo_Maker.zip
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
(Similarly you can replace battery.png and usb.png if you wish)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
1. Transfer the splash.img to your device's Internal Storage.
2. Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
(You can also flash from fastboot as given below)
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from fastboot like:
Code:
fastboot flash splash splash.img
Credits:
1. @GokulNC (myself ) who wrote this script.
2. Modified from my tool here: [GUIDE] How to Create Custom Splash Screen (Boot Logo) for Redmi 2 & Redmi 3
Hit the Thanks :good: button if it worked for you
Don't forget to post here the custom splash screens that you made, since others may find it useful

Qa

thanks @GokulNC for this tutorial
some roms also have a special image for the "starting apps" screen. can this be changed too?

@GokulNC, thank you for your tool.
I want to change Warning message for unlocked bootloader with custom picture. I remember there was some way for Motorola phones: https://forum.xda-developers.com/2015-moto-g/themes-apps/remove-unlocke-bootloader-message-t3177801
Is it possible to use this way for Zuk Z2?
I'd like to find solution but I don't know how to unpack splash.img.
By the way to flash splash we must use the following command:
Code:
fastboot -i 0x2b4c flash splash splash.img

wyt18 said:
some roms also have a special image for the "starting apps" screen. can this be changed too?
Click to expand...
Click to collapse
Nope, that's ROM specific.
Check the ROM's source to find where it is. IDK
.: SID :. said:
I want to change Warning message for unlocked bootloader with custom picture. I remember there was some way for Motorola phones: https://forum.xda-developers.com/2015-moto-g/themes-apps/remove-unlocke-bootloader-message-t3177801
Is it possible to use this way for Zuk Z2?
I'd like to find solution but I don't know how to unpack splash.img.
Click to expand...
Click to collapse
In their case, it was present in the logo partition itself.
But in your case, it guess it's in the bootloader (it was not present in splash partition).

GokulNC said:
In their case, it was present in the logo partition itself.
But in your case, it guess it's in the bootloader (it was not present in splash partition).
Click to expand...
Click to collapse
Is it possible to change it then?
I've noticed that when I powere on phone It shows quickly splash, then warning about unlocked bootloader, after this splash again and at last bootanimation.
So where should I dig?

.: SID :. said:
Is it possible to change it then?
I've noticed that when I powere on phone It shows quickly splash, then warning about unlocked bootloader, after this splash again and at last bootanimation.
So where should I dig?
Click to expand...
Click to collapse
As i said, it's in the bootloader partition (maybe named 'aboot' or something; find it out yourself).
However, it's not recommended to modify the bootloader, since it might brick your device, even if it displaces by a single byte..

GokulNC said:
Note:
This is not bootanimation, this is the splash screen (the 'Zuk' boot logo which is displayed when device is switched ON)
This is for ZUK Z2 / Z2 Pro Only ..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Zuk Z2/Pro (any ROM)
2. Terminal Emulator app installed.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
It's not yet tested by anyone.
1. Make sure you have a 1080x1920 picture in PNG format.
2. Download & Extract this: Zuk_Z2_Splash_Logo_Maker.zip
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
(Similarly you can replace battery.png and usb.png if you wish)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
1. Transfer the splash.img to your device's Internal Storage.
2. Open Terminal Emulator & enter the following to flash itYou can also flash from fastboot as given below)
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from fastboot like:
Credits:
1. @GokulNC (myself ) who wrote this script.
2. Modified from my tool here: [GUIDE] How to Create Custom Splash Screen (Boot Logo) for Redmi 2 & Redmi 3
Hit the Thanks:good: button if it worked for you
Don't forget to post here the custom splash screens that you made, since others may find it useful
Click to expand...
Click to collapse
Nice guide, it will for sure be helpful for a lot of people

Can anyone plz make a splash.img with this logo:angel:

how to flash it via fastboot it says cant load splash.img
---------- Post added at 12:38 PM ---------- Previous post was at 12:25 PM ----------
getting battery icon after flashing it instead of logo

i am getting a battery.png for my logo.png

Does this work with lenovo z2 plus?

dr.bathman said:
Does this work with lenovo z2 plus?
Click to expand...
Click to collapse
Sure.

sergsinger said:
Sure.
Click to expand...
Click to collapse
Cool.. thanks..

[email protected] said:
i am getting a battery.png for my logo.png
Click to expand...
Click to collapse
me too

While offline charging, no picture (or logo) has been visible in a splash made by this program. @GokuINC kindly look into this matter. Thanks.

dr.bathman said:
While offline charging, no picture (or logo) has been visible in a splash made by this program. @GokuINC kindly look into this matter. Thanks.
Click to expand...
Click to collapse
Is visible in mine. Checked?

Rishi2906 said:
Is visible in mine. Checked?
Click to expand...
Click to collapse
Not checked yet..

@GokulNC can you please tell how to unpack these img to png or jpg so I can make modifications?

Thank you for the tutorial!
Here is mine.

Locked bootloader Lenovo Vibe K5 Note K52e78 (chinese version)

Hi,
I've some problems with my Lenovo K5 note, I successfully rooted it with SuperSu and I can connect to it with Mtk Droid Tools (green rectangle at the bottom).
I've also a valid scatter file, and a stock rom backup that I can flash with sp flash tool.
The problem is that I can't flash a modded recovery image with sp flash tool, and can't write to recovery partition in fastboot mode.
So, I think the bootloader is locked, i can type "fastboot oem unlock" in fastboot mode, but when the phone display "Press volume up for Yes/Volume Down for No), volume up don't work, only volume down do...
Is that impossible to unlock the bootloader on this phone now ?
Thanks and sorry for my bad english

How to root?

miningpiky said:
How to root?
Click to expand...
Click to collapse
You can root this phone if you run on Lollipop (5.1) but you can't if you have Marshmallow (6.0).
You need to use Kingroot and next you can replace it with superSu (http://forum.xda-developers.com/a310/general/how-to-remove-replace-kingroot-kinguser-t3308989)

It seems to be possible to write to recovery partition with a tool like Rashr or Flashify : when I flash a recovery.img (non compatible image because there is no custom recovery for this phone), I reboot to recovery and the screen turn black 5 seconds, and the phone restart to normal android system. I can reflash stock recovery, and the chinese recovery is back again.
Is there hope ?

Someone have the Stock Rom for chinese version ?

Bl00dh0und4 said:
Someone have the Stock Rom for chinese version ?
Click to expand...
Click to collapse
Android 5.1 : https://cloud.mail.ru/public/BDJF/zTeHbgSAY
Android 6.0 : https://cloud.mail.ru/public/6sTc/ca9dpikrv

Am having Twrp.img for K5 note
Am having TWRP.img and i ported from UMI plus mt6755...but am searching for rooting procedure

Is your ported twrp working?
baburocks said:
Am having TWRP.img and i ported from UMI plus mt6755...but am searching for rooting procedure
Click to expand...
Click to collapse
Is your ported twrp working?
If yes....Mail me the twrp.img mail: [email protected]
I will try rooting the phone.

Any luck ?
Any luck in figuring out root ?
akash.sanjeev10 said:
Is your ported twrp working?
If yes....Mail me the twrp.img mail: [email protected]
I will try rooting the phone.
Click to expand...
Click to collapse

baburocks said:
Am having TWRP.img and i ported from UMI plus mt6755...but am searching for rooting procedure
Click to expand...
Click to collapse
Brother pls. upload the TWRP image file. I will try to root the phone. Thank you.

The twrp.img doesn't work.....I tried it earlier

Guys anyone have scatter file of this Device, Please upload i need to test the twrp.

Scatter file
XN Logos said:
Guys anyone have scatter file of this Device, Please upload i need to test the twrp.
Click to expand...
Click to collapse
Check this file MT6755_Android_scatter.txt in the link attached.

File
XN Logos said:
Guys anyone have scatter file of this Device, Please upload i need to test the twrp.
Click to expand...
Click to collapse
There are many scatter files for mt6755 but the other one and this one are specific for 2 devices.
A7020a40 and
A7020a48.
This is for a40. Earlier one is for a48.

any news OR any way ?

Anyone know how to unlock bootloader to flash twrp recovery image to Lenovo K5 Note?

After hours of research on the Lenovo K5 note (K52e78), mine is chinese version
I believe this phone you cannot unlock the bootloader.
I get stuck on the 'press up button' to unlock to which there is no response from the phone. I will now give up.
If anyone finds a way please let me know, as generally it is a good phone with great battery, and if I can install a custom ROM it could be a fun phone to use.

[GUIDE] How to Create Boot Logo (Splash Screen) for Lenovo Vibe X3

Note:
This is not bootanimation, this is the splash screen (the 'Lenovo' boot logo which is displayed when device is switched ON)
This is for Lenovo Vibe X3 (Lemon X3, X3C50, X3C70, X3A40, etc..) Only..
For other devices, please send me your splash.img so that I can create a tool for you too..
Requirements:
1. Rooted Lenovo Vibe X3 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Make sure you have a picture in PNG format with resolution 1080x1920px.
2. Download & Extract this in computer: Vibe_X3_Pro_Splash_Maker.zip
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Thanks to @heliusjing who provided the stock splash.img ..
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..

thank u

X3 (K51C78)
Can this work on X3 (K51C78)?
thanks.

GokulNC said:
Note:
This is not bootanimation, this is the splash screen (the 'Lenovo' boot logo which is displayed when device is switched ON)
This is for Lenovo Vibe X3 (Lemon X3, X3C50, X3C70, X3A40, etc..) Only..
For other devices, please send me your splash.img so that I can create a tool for you too..
Requirements:
1. Rooted Lenovo Vibe X3 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Make sure you have a picture in PNG format with resolution 1080x1920px.
2. Download & Extract this in computer: Vibe_X3_Pro_Splash_Maker.zip
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Thanks to @heliusjing who provided the stock splash.img ..
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Click to expand...
Click to collapse
Please make this tool to work to Lenovo Vibe C (a2020a40) (Resolution 480X854)

qianbing said:
Can this work on X3 (K51C78)?
Click to expand...
Click to collapse
If the resolution of your device is 1080x1920px, yes, you can try.
(Ensure you backup your original splash.img before trying this, and also ensure fastboot is working properly)
Marko121311 said:
Please make this tool to work to Lenovo Vibe C (a2020a40) (Resolution 480X854)
Click to expand...
Click to collapse
Send me your device's splash.img

Splash Screen for Lenovo Vibe C
GokulNC said:
If the resolution of your device is 1080x1920px, yes, you can try.
(Ensure you backup your original splash.img before trying this, and also ensure fastboot is working properly)
Send me your device's splash.img
Click to expand...
Click to collapse
This is a splash.img (custom), but works well with my device (a2020a40)
https://mega.nz/#!N1gFGK7K!46lr_NX0sDQCQ74IEADjX1Hmgjqubmg-fBw9tKGDhTs

Animation ?
Thank you.
Is there a way to animate it ?

Oi
Tem para zefone 4 ze554kl? Obrigado

Gracias funciono perfectamente en mi bq m5

Splash Maker for Lenovo K6 Note
Hi Gokul NC, Could you make splash maker for lenovo K6 Note?

thanks man

[GUIDE Lenovo Vibe K5] How to Create Custom Boot Logo (Splash Screen)

Note:
This is not bootanimation, this is the splash screen (the 'Lenovo' boot logo which is displayed when device is switched ON)
This is for Lenovo Vibe K5 Only..
For Lenovo Vibe K5 PLUS, click here..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Lenovo Vibe K5 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this: Vibe_K5_Splash_Maker.zip
2. Make sure you have a picture in PNG format with resolution 720x1280px.
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Thanks to @_eMdzeJ_ who provided the stock splash.img of Vibe K5 (A6020a40)..
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..

How to run CREAT_LOGO.bat ??

dr.bathman said:
How to run CREAT_LOGO.bat ??
Click to expand...
Click to collapse
Doing click.:crying::crying:

Black lenovo splash screen (bootlogo) twrp flashable zip for vibe k5..
Link: https://mega.nz/#!q54BjAzJ!UlWxurpt0Ns6RLAw-dVKlhuTOjfbLTa1hxE3uEPxmbE

Will this work on an A6020a40 (SD616)?

Droidge said:
Will this work on an A6020a40 (SD616)?
Click to expand...
Click to collapse
If screen resolution is same, it should work.

Phone stuck on boot logo
GokulNC said:
Note:
This is not bootanimation, this is the splash screen (the 'Lenovo' boot logo which is displayed when device is switched ON)
This is for Lenovo Vibe K5 Only..
For Lenovo Vibe K5 PLUS, click here..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Lenovo Vibe K5 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this: Vibe_K5_Splash_Maker.zip
2. Make sure you have a picture in PNG format with resolution 720x1280px.
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Thanks to @_eMdzeJ_ who provided the stock splash.img of Vibe K5 (A6020a40)..
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Click to expand...
Click to collapse
i followed entire procedure on my vibe k5.. but i guess its for k5 plus only cuz boot logo is bigger and not the one i made... its blue lenovo unlike previous green lenovo.. now i am stuck on boot logo... i tried flashing stock splash.img provided by you using twrp recovery but it doesnt work... plz help me...:crying::crying::crying::crying::crying:

Hi, sorry for my bad English.
I have a problem, when the smartphone starts it appears a small logo of the penguin of linux and not the image that I have placed. I tried it in all three ways and I had the same result.

[GUIDE]How to Change Splash Screen (Boot Logo) of Mi Max 2

Note:
This is not bootanimation, this is the splash screen (the 'Mi' boot logo which is displayed when device is switched ON)
This is for Xiaomi Mi Max 2 Only (Snapdragon Devices)..
(For other devices, please send me your splash.img so that I can create a tool for you too.)
Requirements:
1. Rooted Xiaomi Mi Max 2 (any ROM)
2. Terminal Emulator app or custom recovery or fastboot.
STEPS to create & install splash.img:
Click here for procedure
(It's the same procedure as that for Xiaomi Mi 5)
Note:
For devices with the latest Nougat firmware, the splash screen is no longer loaded from the splash.img..
Instead, it gets loaded from the logo.img ..
The latest logo.img from @greddy seems to have 6 pictures, each in RBG24 format.
For Mi 5, @Cynob has created a tool for Mi 5 Nougat firmware here (for 5pics): https://forum.xda-developers.com/mi-5/how-to/modified-splash-img-dont-try-logo-t3604134..
You may try to extend it for 6 pictures for Mi Max2.. If you do so, pls tell me, so that I'll link this post to the post that you create..
(I'm a little busy these days, so I'm sorry, I'll do create the tool from scratch when I find time)
Thanks to @greddy who provided the stock splash.img of Mi Max 2.
Hit the Thanks :good: button if it worked for you

GokulNC said:
Thanks to @greddy who provided the stock splash.img of Mi Max 2.
Hit the Thanks :good: button if it worked for you
Click to expand...
Click to collapse
is there an limit in resolution for the logo.jpg ? Now my logo.jpg is 400kb (1920x1080px) , the maker creates an splash.img with 6mb and when
i flash it nothing happen, its always the Mi Logo with the unlocked info below.
greets, Peter

anyone have successfully change the boot logo for the mi max 2 ?
Greets, Peter

My splash screen became just a penguin in the middle of the screen, i cant seem to change it even by flashing new ones via your tutorial. Please help

NexusPhreak said:
My splash screen became just a penguin in the middle of the screen, i cant seem to change it even by flashing new ones via your tutorial. Please help
Click to expand...
Click to collapse
the same here ... i ask allready .. no one can help

NexusPhreak said:
My splash screen became just a penguin in the middle of the screen, i cant seem to change it even by flashing new ones via your tutorial. Please help
Click to expand...
Click to collapse
greddy said:
the same here ... i ask allready .. no one can help
Click to expand...
Click to collapse
Hey, flashing the stock splash.img should fix the problem..
As of now, I don't have the latest splash.img that is supported by your latest firmware.
If you can send your latest stock splash.img, I'll try to create a tool for it
And BTW, I'm very sorry for my late replies, I just saw all the replies in this thread

GokulNC said:
Hey, flashing the stock splash.img should fix the problem..
As of now, I don't have the latest splash.img that is supported by your latest firmware.
If you can send your latest stock splash.img, I'll try to create a tool for it
And BTW, I'm very sorry for my late replies, I just saw all the replies in this thread
Click to expand...
Click to collapse
Please do it!
Attached files from latest global beta 29.3.18 splash.img and logo.img

GokulNC said:
Hey, flashing the stock splash.img should fix the problem..
As of now, I don't have the latest splash.img that is supported by your latest firmware.
If you can send your latest stock splash.img, I'll try to create a tool for it
And BTW, I'm very sorry for my late replies, I just saw all the replies in this thread
Click to expand...
Click to collapse
That's what I exactly did, thanks btw!

Hello! could someone do a standard google splash screen for mi max2, preferably for installation through twrp.

Not working on my device
Flashing the splash image didn't change anything.
I think flashing the logo should work.
Anybody please develop Logo maker for mi max 2.