I have tried many times to install the ROM CyanogenMod 12.1 on my galaxy J5 j500m more without get the error '' could mount filesystem devblock / bootloader ... in such file directory '' something written not remember right message, already tested several versions different cm old and new versions and other models without the j500m, already tried to install on my adb sideload too, but all I get this error a long time already managed to perform this installation but now I can no longer
obs: I went to the Android 6.0 but I downgrade back to 5.1.1 and so to install the 12.1 cm but can not
NOTE 2: already tried the 2.8 version of TWRP also.
help me really want to run this rom
sorry my bad english
I used the CM12.1 by nick verse and it was good. Try re flashing the stock rom then the recovery before you flash CM12.1
John
Related
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
Install a ROM with marshmellow firmware please don't post in this thread of j5 forum
hi, already posted by mistake at firmware section admins can delete that please...
having TOTALLY erased my SM-J500F/DS with TWRP I cannot put back anything...
ANY help on stock recovery, custom rom or anything would be greatly appreciated... I tried already one custom rom but I am not sure... just install the zip file? This procedure doesn't boot, restarts gets the logo and after this the screed gets yellowish like damaged!!!... again I have TWRP access thankfully...
please any help?
gsp1 said:
hi, already posted by mistake at firmware section admins can delete that please...
having TOTALLY erased my SM-J500F/DS with TWRP I cannot put back anything...
ANY help on stock recovery, custom rom or anything would be greatly appreciated... I tried already one custom rom but I am not sure... just install the zip file? This procedure doesn't boot, restarts gets the logo and after this the screed gets yellowish like damaged!!!... again I have TWRP access thankfully...
please any help?
Click to expand...
Click to collapse
You must go to section Samsung j5 2015 you will find all you need, since restoring to stock, rooting, installing the correct TWRP for your device....and more.
You NEED to READ because too much information for one post, but this is the correct place for you.
Pay attention the correct files TWRP for 601 because there are TWRP for lollipop devices, and when choosing ROMs you MUST downgrade your firmware to Lollipop, that's the reason for artifacts and greenish screen because of incompatibility of TWRP and there are ROMs that you can install with twrp601, others need booltloader and twrp lollipop. Hope you are nota blind anymore
Taivotat2 said:
You must go to section Samsung j5 2015 you will find all you need, since restoring to stock, rooting, installing the correct TWRP for your device....and more.
You NEED to READ because too much information for one post, but this is the correct place for you.
Click to expand...
Click to collapse
Many thanks! I will do it!
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
I had the same problem when flashing Lineage 14.1 on my phone (J500M), screen fadding with a green-yellowish color and no boot. That happened because I was trying to flash the custon Rom with the wrong base. I was using 6.0 before flashing and Lineage requires you start from 5.1.
All I need to do was search for my device on sammobile.com , get the right stock firmware and use Odin to flash the rom on my device. From there I was able to flash TWRP again and install Lineage correctly.
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
You have two solutions, you can restore your phone STOCK ROM with Samsung Smart Switch or downgrade to Lollypop firmware and install any custom rom trough TWRP.
Restore to STOCK:
Use Samsung Smart Switch, see howto here
Downgrade to Lollipop:
Install only Bootloader/Modem [6.0.1/5.1.1]BOOTLOADER AND MODEM FOR J500xx [Downgrade more easy] (Collection)
Downgrade to Lollypop (full ROM) (Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Also take a look at [GALAXY J5] Basic informations | Guides | Tips and Tricks | ROMS & KERNELS
DDkin said:
I had the same problem when flashing Lineage 14.1 on my phone (J500M), screen fadding with a green-yellowish color and no boot. That happened because I was trying to flash the custon Rom with the wrong base. I was using 6.0 before flashing and Lineage requires you start from 5.1.
All I need to do was search for my device on sammobile.com , get the right stock firmware and use Odin to flash the rom on my device. From there I was able to flash TWRP again and install Lineage correctly.
Click to expand...
Click to collapse
American_Jesus said:
You have two solutions, you can restore your phone STOCK ROM with Samsung Smart Switch or downgrade to Lollypop firmware and install any custom rom trough TWRP.
Restore to STOCK:
Use Samsung Smart Switch, see howto here
Downgrade to Lollipop:
Install only Bootloader/Modem [6.0.1/5.1.1]BOOTLOADER AND MODEM FOR J500xx [Downgrade more easy] (Collection)
Downgrade to Lollypop (full ROM) (Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Also take a look at [GALAXY J5] Basic informations | Guides | Tips and Tricks | ROMS & KERNELS
Click to expand...
Click to collapse
MANY THANKS to both of you guys!
Bro just install the official rom ,u can download it from the official site and flash with odin ..
I tried to install a custom rom on a a6000. I installed the lolipop stock rom on top of the KitKat stock rom, and managed to boot to it without a problem. I then installed TWRP installed is: 3.3.1-0, and tried to install a custom rom (more specifically I tried this unofficial Lineage). For some reason, the installation fails with:
e3004: This package is for device: Kraft-T, a6000, K30-T,A6000, Kraft-W, Kraft-C, k30t, msm8916,Kraft-A6000,wt86518; this device is .
Updated process ended with ERROR 7
Click to expand...
Click to collapse
when booting into the stock lolipop rom installed I can see that the device is the A6000. I find it strange how the recovery doesn't write which device it is on this error message.
What am I missing here? Usually with other phones, as long as you manage to install a custom recovery then it's a breeze. I cannot figure out how the custom roms don't get installed. Any help appreciated
Managed to flash it in the end. The flash files contain assertions checking if the zip is okay to be flashed on the device (whether the model is the one intended for example).
I found it strange that the error message did not show the model of my device as I was 100% sure it is a A6000 and that is a ROM intended for it.
I ended up overriding the assertion in the file, which seemed to be straightforward to do and the image was flashed without any issues.
DO NOT TRY THIS AT HOME unless you are 10000% sure the image is intended for the device. ?
runningdap said:
I tried to install a custom rom on a a6000. I installed the lolipop stock rom on top of the KitKat stock rom, and managed to boot to it without a problem. I then installed TWRP installed is: 3.3.1-0, and tried to install a custom rom (more specifically I tried this unofficial Lineage). For some reason, the installation fails with:
when booting into the stock lolipop rom installed I can see that the device is the A6000. I find it strange how the recovery doesn't write which device it is on this error message.
What am I missing here? Usually with other phones, as long as you manage to install a custom recovery then it's a breeze. I cannot figure out how the custom roms don't get installed. Any help appreciated
Click to expand...
Click to collapse
Hi... Actually you can flash custom ROM on Lenovo a6000.
Im also using Lenovo a6000 and I'm running custom ROM.... feel free to Reply if u need any help..I'm glad to see that you will.?
Hi, Hoping someone can help me with my recent goofup.
I was running a version of LineageOS. Now I hadnt used the tablet for a while during the xmas break. But the last week I took out and it had rebooted on me randomly a few times. After which I decided to put a stock rom back on.
i downloaded a stock rom from sammobile and attempted to install the ROM via odin but the tablet kept rebooting me after the install process
after a few failed attempts on various ROM. I thought it might be easier to go back LineageOS so i loaded twrp back on and have been trying ever since to LineageOS 16.0
I downloded the ROM's - lineage-16.0-20200128-nightly-gts28vewifi-signed. When I try to install the ROM after following the instructions of wiping the device I get this "zip signature verification failed"
my tablet is SMT-713 so am pretty sure gts28vewifi is correct. Please can someone help me out on clues on how I get passed the hurdle.
yes such a goofup. i should have just cleared the ROM instead of attempting to put a stock rom on
Which stock ROM did you download? Was it the latest software? Fair warning, I'm a T813 owner, so I don't know anything about the T713 really, just that it's fairly similar. If you installed the wrong ROM, or the an older one, Lineage won't install. I created this guide, for the T813 about updating the firmware on it because of the firmware / install issues on LOS.
Hello!
I try to install the latest version of lineage on my note 3 and followed the tutorial on the lineage website.
However, I got some issues getting the latest version of TWRP on the phone. Beside the method via heimdall I've also tried Odin and update via old TWRP install and sd card. I also installed the stock rom again and retried flashing but nothing worked.
Basically I can flash old TWRP and get into the TWRP recovery mode - twrp-2.8.7.0-hlte-4.4.img works perfectly fine. But when I try twrp-3.4.0-0-hlte or trwp-3x though the flash is confirmed I cannot get into recoverymode and will end up in a bootloop.
I've tried twrp-3.2.2-0-hlte, twrp-3.1.1-0-hlte, twrp-3.4.0-0-hlte all with same result (bootloop). Only version that works is twrp-2.8.7.0-hlte-4.4
Any idea where this issue may come from?
Any other recovery tool I could use to get lineage on my note3?
update:
hmm why would the recovery system care for the os?
fwiw I updated the firmware to the latest official version (android 5.0) and then retried.
same result: with TWRP 2.8.7.0 I can flash and get into recovery mode. TWRP 3.x I can flash and they will bootloop
TWRP 2.8.7.0 I get the message
"Recovery booting...
recovery is not seandroid enforcing
Set warranty bit: recovery"
=> TWRP recovery mode
TWRP 3.x
"Recovery booting...
Set warranty bit: recovery"
=> bootloop
What model ??
Known issue for some re TWRP 3 failing , well posted on here .
Read answers to your other posts .
JJEgan said:
What model ??
Known issue for some re TWRP 3 failing , well posted on here .
Read answers to your other posts .
Click to expand...
Click to collapse
sm n9005
I found a possible reason in the TWRP thread: LCD and Digitizer may have been replaced and hardware change could case this. I am not sure though
[/COLOR]
ashyx said:
If you've got one of those finicky devices which seems to have slightly different hardware then you may find this build works:
https://androidfilehost.com/?fid=6006931924117938350
However be aware it's also likely you will not be able to boot any recent android version on your device if this is the case.
Click to expand...
Click to collapse
this worked for me finally! And it looks like linageOS can be installed too... I will update
-------
lineageOS and google apps could be installed without issues. I was stuck on the bootsequence quite a bit but now I am in the OS
smuffiy said:
sm n9005
I found a possible reason in the TWRP thread: LCD and Digitizer may have been replaced and hardware change could case this. I am not sure though
[/COLOR]
this worked for me finally! And it looks like linageOS can be installed too... I will update
-------
lineageOS and google apps could be installed without issues. I was stuck on the bootsequence quite a bit but now I am in the OS
Click to expand...
Click to collapse
Hi smuffy,
May I know what lineage version are u flashing?
I'm facing same problem also, can you please guide me how to solve this issue?
Thanks
I do not remember exactly but I think the latest by that time.
However I was unable to make lineage detect my SIM card after that. I tried some other workarounds but it never worked and I finally gave up.
smuffiy said:
I do not remember exactly but I think the latest by that time.
However I was unable to make lineage detect my SIM card after that. I tried some other workarounds but it never worked and I finally gave up.
Click to expand...
Click to collapse
My phone cannot flash lineageOS 17.1 version and above.
My phone is new, just rooted, tried custom rom android 9 worked!
LineageOS 16 - ok
LineageOS 18.1 - x (After flash, cannot see any file inside the phone memory)
Havoc 2.9 - ok
Havoc 3.7 - x (After flash, cannot see any file inside the phone memory)
Are you facing same problem also?
*Remarks*
My phone keep in bootloop, cannot initialize...
Thanks.
Which TWRP are you using? I had the custom "twrp 3311 ashyx".
I just checked, 17.1+ also does not work for me. Just as you stuck in bootloop.
With this (ashyx) https://www.alebalweb.com/note3/note3-sm-n9005--twrp--work-on-my-note3.zip los 17 work until 02 jan 2021... Then bootloop...
I can't update after 02 jan 2021 (Galaxy Note 3 SM-N9005)
I can't update after 02 jan 2021 on my Galaxy Note 3 SM-N9005, all work good but when the phone restart... an infinite reboot... I make a video to show what happen If I reinstall the 02 jan 2021 update the phone work perfectly... Ideas?
forum.xda-developers.com
Hi all new here so I wanted to root my note 3 all went good nice and easy got twrp on it went to flash linage 17.1 and failed so did a wipe and seem to have wiped the lot including the stock rom sorry to be a noob at this so I've been using Odin to reroot and install twrp recovery 2.8 via SD card as that's the only way I know how and it works but every rom I try fails . I get command log error or the. error executing updater binary in zip any help would be good did read that my new digitizer and screen could be the issue as it seems to be a knock off ? Thanks in advance
See your identical post .