Related
Hi,
guess this will be more of a review as it is hard to say which feature i like BEST:
Got my MAX 3gb/64gb (helium) delievered yesterday. Since it came with the 7.3 MIUI first thing i had to do was read up on how to install the MIUI8 China dev rom to the device. After a bit of fiddling and translating chinese / indian websites i came up with a workable solution, even with the bootloader locked. So since yesterday evening i got MIUI8 6.6.23 running on the device - weeded out some apps i did not understand (chinese) and installed Play Store.
So far i must say - this phone is glorious. MIUI8 is fast and seemingly stable, i did not come across any big bugs and there doesnt even seem to be the typical micro-stuttering. Im really happy i bought the phone and hoping there will be a multilanguage (i.e. german) MIUI8 for it. For now im perfectly good with the Dev Rom and english localisation.
Thanks Xiaomi!
To anybody interested - flashing the China Development ROM (MIUI 8 6.6.23) with the locked bootloader was not exactly easy, here is how to:
- get the rom image from here: http://en.miui.com/thread-299033-1-1.html (be sure to download the Mi Max Pro fastboot image - 1418mb)
- get MiFlash Beta from here: http://xiaomitips.com/download/new-miflash-beta-one-click-install-miui-fastboot-rom/
- extract tgz fastboot image - keep folder structure!
- enable developer options -> usb debugging in additional settings then turn off phone
- boot phone into EDL mode (phone off, press simultaneously vol+&vol- then connect usb cable)
- open miflash beta - there should be an entry with "id 1" and "device" something like "COM10" in the bottom table now - SEE ATTACHED SCREENSHOTS!
- select the folder where extracted image is located
- tick "clean all" in the bottom right
- hit flash
- enjoy.
First of all, thank you for sharing this. I went step by step (vol up and down didn't work for me, tried power and vol up and device didn't show up in fast boot, did vol down and power and it showed up) then I flashed the image and it successfully flashed, when the device booted it still showed the 7.4.16 global stable Rom the vendor installed : /, I did it again and the same thing, the rom didn't change. could you please help/?
Sorry, I followed the steps exactly as described and it worked out perfectly, thank you very much, its just that when I pressed vol + and - I didn't see anything on the screen so I thought it wasn't working, miui 8 is nice indeed, could you explain how you installed the play store, the one on the Mi store is crashing on me.
it's a little tricky but there is a thread on here that should get you started. you have to use the Google installer and then update some Google components before you restart your phone.
Tapatalk on Mi Max
g_BonE said:
Hi,
Got my MAX 3gb/64gb (helium) delievered yesterday.
Click to expand...
Click to collapse
where you buy the 64 GB Mi Max ?
Greets, Peter
bought it through nis-store.com had it delivered 3 days later. can recommend. they ship with DHL.
Tapatalk on Mi Max
Is it possibile to get it rooted?
e753 said:
Is it possibile to get it rooted?
Click to expand...
Click to collapse
Nothing is impossible... Unlock bootloader (not even required anymore), flash TWRP, flash latest SuperSu or prerooted ROM... Done.
Hi, friends
I bought my first Xiaomi device, it' MI MAX Pro (snapdragon 652) I found other link MIUI 8 China Developer ROM 6.7.7 from en.miui, so I'm very confused what is difference between
MIUI 8 China Developer ROM 6.6.23 link from OP
http://en.miui.com/forum.php?mod=viewthread&tid=306329&extra=page=1&mobile=2
Please advise me.
Thank you.
memooffon said:
Hi, friends
I bought my first Xiaomi device, it' MI MAX Pro (snapdragon 652) I found other link MIUI 8 China Developer ROM 6.7.7 from en.miui, so I'm very confused what is difference between
MIUI 8 China Developer ROM 6.6.23 link from OP
http://en.miui.com/forum.php?mod=viewthread&tid=306329&extra=page=1&mobile=2
Please advise me.
Thank you.
Click to expand...
Click to collapse
6.6.23 is older (june 23)
6.7.7 is the newest sofar (July 7)
I use the weekly multi rom on my MI Max since its better tuned with translations and the china apps that I don't use are removed
https://xiaomi.eu/community/threads/6-7-7-11.32639/
the process for installing the new Version does not change with the newer miui8 6.7.7 so you're good to go with the same Instructions from OP.
Meanwhile on my Max I have boot loader unlocked and root. Works flawlessly with the new MIUI weekly Releases.
Tapatalk on Mi Max
I am on China stable rom
Already unlocked bootloader
Does official twrp hydrogen work properly with helium model?
nijel8 said:
Nothing is impossible... Unlock bootloader (not even required anymore), flash TWRP, flash latest SuperSu or prerooted ROM... Done.
Click to expand...
Click to collapse
May we ask you to share your experience for helium.
There are few resources for this device.
Thanx!
s2k7 said:
May we ask you to share your experience for helium.
There are few resources for this device.
Thanx!
Click to expand...
Click to collapse
I have hydrogen but reading the forums people are using same TWRP for helium. Just read XDA and official MIUI forums...
g_BonE said:
it's a little tricky but there is a thread on here that should get you started. you have to use the Google installer and then update some Google components before you restart your phone.
Tapatalk on Mi Max
Click to expand...
Click to collapse
Would you mind pointing that thread where it's explained?
Thanks a lot for you experience sharing,
I was wondering maybe you solved this: i can't get whatsapp to run on this rom, even with all permissions given, whatapps and skype cant access my contacts. I got my contacts on the system using the old google installer apk which worked wonders except now i can't get past the looking for backup screen in whatsapp.
If anyone has ideas pls let me know and in the meanwhile i will try to flash other roms to see if one works..
I answered my own question playing with the settings. You have to register under accounts mi accounts to unable contact sync for all apps .... ? anyway it all works now!
BTW I have updated MUIU using http://en.miui.com/download-302.html#446 new dev rom and followed instructions.
pocketjose said:
Would you mind pointing that thread where it's explained?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=UgdsvrtFji0 follow that! step by step
ispeedca said:
I answered my own question playing with the settings. You have to register under accounts mi accounts to unable contact sync for all apps .... ? anyway it all works now!
BTW I have updated MUIU using http://en.miui.com/download-302.html#446 new dev rom and followed instructions.
Click to expand...
Click to collapse
Thanks heaps for the tutorial about installing Google Play services
By the way, can this rom you're talking about be flashed following the instructions by original poster?
Do I need to flash in first place the rom from original poster (MIUI 8 6.6.23) and then flash your new one (MIUI 8 6.7.14)?
Or can I flash directly latest one?
pocketjose said:
Thanks heaps for the tutorial about installing Google Play services
By the way, can this rom you're talking about be flashed following the instructions by original poster?
Do I need to flash in first place the rom from original poster (MIUI 8 6.6.23) and then flash your new one (MIUI 8 6.7.14)?
Or can I flash directly latest one?
Click to expand...
Click to collapse
I can't tell you for sure but i think you have to use the instructions from the muiu site if you want the lastest dev rom.
1- I used OP instructions and links to install muiu 8
2- updated to last china dev rom following muiu site instructions.
3- installed all gapps stuff
PS if you want to ROOT, do this between 2 and 3: (unlocked boot loader)
1-Download SuperSu to root Xiaomi Mi Max and copy it to your phone sd card from this site: http://www.stechguide.com/root-install-twrp-recovery-xiaomi-mi-max/
2-Download xiaomi twrp flasher and use it to flash from: http://forum.xda-developers.com/mi-max/development/tool-xiaomi-twrp-flasher-mauronofrio-win-t3405207
3-Follow instructions from step 9 : http://www.stechguide.com/root-install-twrp-recovery-xiaomi-mi-max/
Last thing im playing with trying to activate LTE bands on the phone. If anyone can help for that, i can't get the drivers to install propertly
This is not my ROM. I'll post here for HELPS, TUTORIALS, PROBLEM SOLVING.
.
ROM credited to Helious from bhnotes.com
.
100% Stable CN ROM base
NO CHINESE BLOATWARE
BASIC PLAYSTORE
CLEAN
STABLE
GLOBAL MODDED (90% Translation PERFECTED FOR JAPANESE language)
Other languages based on Global languages
No ROOT
SAFE AND WORKING
STEPS TO INSTALL
YOU MUST HAVE
? A Xiaomi Mi 6 device (any variant)
? *Mi Account synced with device at least 72 Hours (for new users)
? Unlocked Bootloader
? TWRP
? PC/LAPTOP
? **OTG
? Internet connection
? Basics of MIUI ROM flashing for Mi devices (refer en.miui.com/forum.php)
STEP 1
Unlock your device bootloader using the Mi Unlock tool. If done ignore this step, if not read.
.
New user must sync Mi Account for at least 72 Hours before able to unlock bootloader using the Mi Unlock tool. Once synced, use the tools to unlock
STEP 2
Flash TWRP using CMD via PC/Laptop
https://drive.google.com/file/d/0B4d6gFePZwjDOHlzeGRjSVdldEk/view
.
This is the English version from android-hilife.de
STEP 3
Download ROM here
https://www.androidfilehost.com/?fid=817550096634769960
.
This is the latest MIUI version for CN Stable 8.2.22 modded by Helious from bhnotes.com called ECRMod,
Also download the "packageinstaller_zip_7.1.zip" here
https://www.androidfilehost.com/?fid=673368273298955410
.
This is a Google Play Services patch for stability, if not flash lots of FC going to annoys you and also probably BOOTLOOP
STEP 4
In TWRP select "Wipe", select "Format Data". Oh yeah, do a backup using the Mi Backup app before start everything and transfer "AllBackup" folder to your PC/Laptop.
.
Transfer both downloaded files to your device
STEP 5
Flash ROM.
Wipe Caches.
Reboot.
.
Bootloop or probably infinite loading at Mi logo with dotted android loading animations..
.
So, enter your recovery by pushing the power button than after the blank screen immediately push the upper volume button.
MUST DO THIS ONE BY ONE, DON'T FLASH 2 zips at once or flash zips before rebooting after 1 zip installation
.
Flash the patch.
Wipe Caches.
Reboot.
Booted.
Crash.
Force to reboot.
Setup.
STEP 6
Enjoy your Mi 6 with Global ROM
########
IF PLAYSTORE NOT WORKING
########
.
Download and flash this
https://www.androidfilehost.com/?fid=673368273298946245
If you want the ORIGINAL Mi 6 Stock Recovery download it here..
https://drive.google.com/file/d/0B4d6gFePZwjDRXp6ZkJseTVHQjg/view
NO NEED OTHERS SCREENSHOTS AS MIUI 8 IS ALWAYS THE SAME WITH FEW TWEAKS AND FEATURES ADDED. DISCOVER YOURSELF.
Btw the new recent app is BEAUTIFUL
Hit me at Twitter @FahimZahar if I slowly response here. I'll get it back to you ASAP as I can.
Thx bro!! Can u confirm this has all the following working properly"
camera
google contacts sync
google play services
gmail sync
Thx
sprockettyz said:
Thx bro!! Can u confirm this has all the following working properly"
camera
google contacts sync
google play services
gmail sync
Thx
Click to expand...
Click to collapse
Hi,, follow all the steps above, but download newer ROM from mi-globe.com or xiaomi.eu. It's much stable now
Original Recovery file
The original recovery file you posted is in Chinese language. Any chance of posting the English version?
Thank you
xkim toino said:
The original recovery file you posted is in Chinese language. Any chance of posting the English version?
Thank you
Click to expand...
Click to collapse
Take this one!
https://www.androidfilehost.com/?fid=817550096634771569
Fyi, Xiaomi EU had released their stable version for MI6. They used 8.2.23.0.
This Rom has gapps fully working, also for Gmail notification.
Superwitschi said:
Take this one!
Click to expand...
Click to collapse
This one is twrp and I have already. What I want is the original one from xiaomi English language
Does this Rom allow OTA-Updates?
trytogetme said:
Does this Rom allow OTA-Updates?
Click to expand...
Click to collapse
Xiaomi.Eu maybe got OTA but superb slow. Better download ROM and FLASH
xkim toino said:
This one is twrp and I have already. What I want is the original one from xiaomi English language
Click to expand...
Click to collapse
Not available as for now. Because no OFFICIAL global ROM to extract the Recovery..
thanks
How is the camera on this one? I've read some unofficial roms have poor camera performance.
Anyone updated this rom to thé version MI6_sagit_V8.2.22.0.NCACNEC_7.1_ECRMod_20170522.zip
??
7.5.25 rom bug ?
Hello there
I'm a new xiaomi mi6 user. I have 7.5.25 version rom installed on my phone. My phone does not see andriod wear app on my smart clock with bluetooth. Also does not share internet with hotspot. There is also a problem with the GPS, the satellites can not find it immediately. can you help me.
Thank you
Official Global Stable is released. so enjoy..
Can I install root
Hello, I received my leeco le pro 3 722 in version EUI 8.8.020s and I have not the update button in the settings it is normal?
Wazaq said:
Hello, I received my leeco le pro 3 722 in version EUI 8.8.020s and I have not the update button in the settings it is normal?
Click to expand...
Click to collapse
5.8 or 5.9 I'd say, but probably not 8.8.
And it's a shop Rom for international orders. I'd bet it came with Google Play pre-installed too, right?
ZeblodS said:
5.8 or 5.9 I'd say, but probably not 8.8.
And it's a shop Rom for international orders. I'd bet it came with Google Play pre-installed too, right?
Click to expand...
Click to collapse
Yes there was already the play store and the phone and well under EUI version 5.8.020s I was wrong and so I would like to know if I can update and how?
Wazaq said:
Yes there was already the play store and the phone and well under EUI version 5.8.020s I was wrong and so I would like to know if I can update and how?
Click to expand...
Click to collapse
I don't own a x722 myself, but if it's like a x720 you can flash a stock rom using the recovery boot (boot the phone while holding volume up). You can find said rom on the x722 subforum.
ZeblodS said:
I don't own a x722 myself, but if it's like a x720 you can flash a stock rom using the recovery boot (boot the phone while holding volume up). You can find said rom on the x722 subforum.
Click to expand...
Click to collapse
Ok so when I go into the recovery at startup I have an update button but I would like to know if the roms (720,722,727) are compatible between it?
I suggest you to read carefully the various threads to learn "how to". And no, the roms for Lex 720/727 aren't compatible with Lex 722, until now. Lex 722 has slighty different hardware but it is enough to prevent easy compatibility. Cheers!
Do not flash a x720 or x727 rom to your x722, you will brick the phone.
ZeblodS said:
Do not flash a x720 or x727 rom to your x722, you will brick the phone.
Click to expand...
Click to collapse
Thank you very much but I can not find an official EUI rom for the 722. And it is possible to install android 6.0.1 because it is the current version of my phone but with the leeco overlay.
Wazaq said:
Thank you very much but I can not find an official EUI rom for the 722. And it is possible to install android 6.0.1 because it is the current version of my phone but with the leeco overlay.
Click to expand...
Click to collapse
Right in this Le Pro3 forum there is a subforum dedicated to the x722 man...just open your eyes.
https://forum.xda-developers.com/le...0-1-eui-5-9-26s-leeco-le-pro-3-elite-t3642159
ZeblodS said:
Right in this Le Pro3 forum there is a subforum dedicated to the x722 man...just open your eyes.
https://forum.xda-developers.com/le...0-1-eui-5-9-26s-leeco-le-pro-3-elite-t3642159
Click to expand...
Click to collapse
Ok thank you again
has anyone tried to install Lineage on Phab 2 yet?
Yup I've tried the Russian version. I've tried all four of thier rooms listed on thier Lenovo forum. All are for the PB650M all install and run perfectly with one critical fail. No sim services. No IMEI and no Baseband. Epic fail.
It appears to be an issue with the mediatek CPU. MTK devices all tend to loose thier connectivity after flash a rom. Two weeks I've tried different back up tools for Baseband, imei, radio, modems and kernels. So far nothing has worked.
It was super easy to root super easy to install twrp 3.02 and upgraded to 3.03. so far tats as far as I can get it to go. I've learned that PB650M ROMs and recovery images all install on our device. Now if I can beat the MTK issue we are in.
The hunt continues.
Sent from my Lenovo PB2-650Y using Tapatalk
frankbonatelli said:
Yup I've tried the Russian version. I've tried all four of thier rooms listed on thier Lenovo forum. All are for the PB650M all install and run perfectly with one critical fail. No sim services. No IMEI and no Baseband. Epic fail.
It appears to be an issue with the mediatek CPU. MTK devices all tend to loose thier connectivity after flash a rom. Two weeks I've tried different back up tools for Baseband, imei, radio, modems and kernels. So far nothing has worked.
It was super easy to root super easy to install twrp 3.02 and upgraded to 3.03. so far tats as far as I can get it to go. I've learned that PB650M ROMs and recovery images all install on our device. Now if I can beat the MTK issue we are in.
The hunt continues.
Sent from my Lenovo PB2-650Y using Tapatalk
Click to expand...
Click to collapse
No sim services, No IMEI and no Baseband. Epic fail indeed. MTK. what a problem chip.
Lenovo Phab 2 650M TWRP
Hi,
I maked today a TWRP on my Phab 2 650M ,after flash my Phab is not starting,the bootlogo goes on and out ,on and out. I can't go in the recovery menü. What can i make now, it's not starting and i can't flash a new software because the pc don't found the phab.they say ,,fail to download DA to baseband chip's internal SRAM,,
Lineage Os 14.1 Lenovo Phab2 PB2-650M
JonBizkit360 said:
has anyone tried to install Lineage on Phab 2 yet?
Click to expand...
Click to collapse
Finally Lineage Os 14.1 ported for Lenovo Phab2 PB2-650M by ARRAKI.
http://lenovo-forums.ru/topic/24812-lineage-141/?page=1
Reshan Kariyawasam said:
Finally Lineage Os 14.1 ported for Lenovo Phab2 PB2-650M by ARRAKI.
http://lenovo-forums.ru/topic/24812-lineage-141/?page=1
Click to expand...
Click to collapse
are you tested this ROM?? works for P650Y? What is the base? Because the last OTA for 650Y is 650Y_S041_181101_ROW, but is interesting.
Phab2
kuiyibo said:
are you tested this ROM?? works for P650Y? What is the base? Because the last OTA for 650Y is 650Y_S041_181101_ROW, but is interesting.
Click to expand...
Click to collapse
I've tested it on my pb2-650m. it works smoothly and 3x speed than stock. everything works fine except flashlight, camera (focus error) , screencast. thats all I've found. it should works on 650y also cause they both have same specs kernals and hardware. if you get error "this is for pb2-650m" , remove assert get prop lines in the updater script in rom file. then flash it. backup your current rom using twrp. have a good day.
Reshan Kariyawasam said:
I've tested it on my pb2-650m. it works smoothly and 3x speed than stock. everything works fine except flashlight, camera (focus error) , screencast. thats all I've found. it should works on 650y also cause they both have same specs kernals and hardware. if you get error "this is for pb2-650m" , remove assert get prop lines in the updater script in rom file. then flash it. backup your current rom using twrp. have a good day.
Click to expand...
Click to collapse
Is there a updated version with fixed flashlight and camera? Where did you find the ROM?
does anyone have this reuploaded?
Any change?
Is there any change from posting this topic? After latest update of the phone, it is slow and after restart initializing of system takes forever. I would like to install Lineage OS, but I can not find any good tutorial or any legit download link at least.
Reshan Kariyawasam said:
Lineage Os 14.1 Lenovo Phab2 PB2-650M
Finally Lineage Os 14.1 ported for Lenovo Phab2 PB2-650M by ARRAKI.
http://lenovo-forums.ru/topic/24812-lineage-141/?page=1
Click to expand...
Click to collapse
The download link on the website is broken... Anyone still have it?
BloodyFruitDestroyer said:
The download link on the website is broken... Anyone still have it?
Click to expand...
Click to collapse
+1
Hi all I have finally got the Pixel experience rom booted on my mi max 3 with the fixes from this post https://forum.xda-developers.com/mi-max-3/how-to/guide-android-9-pie-aosp-phh-treble-rom-t3862708
To do is it takes a while but is worth it latest update 11/01/2019 is stable
ok here we go
first you need to flash or factory reset your phone on the latest china beta so as of today its 9.1.10
next downlaod the xiaomi.eu rom latest rom whatever it is
https://xiaomi.eu/community/threads/9-1-10.48651/
download the pixel rom for ARM64 A ONLY
https://github.com/EnesSastim/Downloads/releases THIS IS THE ACTUAL WEBSITE
HERES THE DIRECT ROM LINK
https://github.com/EnesSastim/Downl...A-2019-11-01/PixelExperienceP-arm64-aonly.zip
Magisk if you need it
https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip
patches and fixes for brightness etc
https://forum.xda-developers.com/attachment.php?attachmentid=4680047&d=1546632878
ALL IN ONE TOOL USED TO FLASH TWRP
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
OK HERES HOW TO INSTALL IT
FIRST COPY ALL FILES ABOVE TO YOUR PHONE THEN FOLLOW THIS GUIDE
Flash the original China dev via miflash (no lock Bootloader option tick). Because the original China dev Fastboot Rom recreate the original Partitions.
Start the system until welcome Screen(don't know why but it was one solution)
Then in Fastboot mode: Fastboot format userdata
Then flash newest original twrp in Fastboot. USING THE ALL IN ONE TOOL
Then install xiaomi.eu
Start system until welcome screen.
Reboot to recovery
Factory reset
Reboot to recovery
Install PixelExperienceP-arm64-aonly.IMG FROM 11/01/2019
Reboot recovery
Install magisk 18.0
REBOOT RECOVERY AGAIN
MOUNT AND MAKE SURE VENDOR IS MOUNTED
NOW FLASH THE ZIP FILE FOR THE FIXES
Reboot to system
HOPEFULLY IN ABOUT 5 MINUTES THE PHONE SHOULD BOOT UP ENJOY
:good:
Mistake
will the exFat SD sard could be read?
jacklau2000 said:
will the exFat SD sard could be read?
Click to expand...
Click to collapse
Yes, mine is working 100% fine, keep all my Maps and Spotify data on it.
Thanks, I will try it later.
What is this thread doing here...!? Did you build/developed anything! At least you could've integrated all "fixes" in a single install package... Otherwise what's different from other guides we already have.
nijel8 said:
What is this thread doing here...!? Did you build/developed anything! At least you could've integrated all "fixes" in a single install package... Otherwise what's different from other guides we already have.
Click to expand...
Click to collapse
Wrong section ! Move it to Guide one
Theseusperse said:
because in China they have 3 different Mi Max 3 variants: Nitrogen, Helium and Hydrogen, and the first firmware on the Chinese download page is to the 32GB Hydrogen Mi Max 3, which will actually work!
Click to expand...
Click to collapse
What? Mi Max 3 has just "nitrogen" codename.
"helium" and "hydrogen" are just Mi Max 1! First one is equipped with Snapdragon 652, second one is equipped with Snapdragon 650. I guess that if you'll flash helium/hydrogen firmware on nitrogen you'll get bricked
@moderator @admin @engloa @MikeChannon
Please MOVE this thread to its correct place: https://forum.xda-developers.com/mi-max-3/how-to
This is not an original developing/ROM Building as @nijel8 said...just a copy of this description:
china rom
where do i find thee china tgz rom for miflash? cant find it anywhere...
meruelodaniel said:
where do i find thee china tgz rom for miflash? cant find it anywhere...
Click to expand...
Click to collapse
:silly: You can find it on the Internet
Have try a lot of GSI rom on Max 3 and it's never smooth and stable like Miui (Xiaomi.eu for me)....wait a true custom rom
Totally agree with you
What happens if I don't install Chinese ROM, and flash this Pixel Experience ROM on Xiaomi.eu right away?
SerikKr said:
What happens if I don't install Chinese ROM, and flash this Pixel Experience ROM on Xiaomi.eu right away?
Click to expand...
Click to collapse
I do this and it's ok, but you'll see, it's not perfect
Shuyin10 said:
Have try a lot of GSI rom on Max 3 and it's never smooth and stable like Miui (Xiaomi.eu for me)....wait a true custom rom
Click to expand...
Click to collapse
I agree, they all have too many issues. It's been 7 months now and we don't have any custom ROM's despite this being one of the most popular Xiaomi phones (according to their offical forums and rom download stats), so why the hell is nooone developing for it? At this rate the Mi Max 4 will be out before the we even have a single native custom ROM.
I to was pissed off because there are no custom romI order another phone, not xiaomi and when i receive it will sell my mi max 3.I am not sure that will try xiaomi phones again..
I'm currently using Miui PRO - latest version and it is Android 9 - working flawlessly, no errors found so far and battery is pretty amazing Go on and try it guys, it's the best thing and it is regularly updated. Not changing my Mi Max 3 for anything so far. The russians have done amazing job with this rom
Havoc 2.0 is epic on this phone guys. I have been using for over a month now and its solid. Few issues were BT audio and adaptive brightness for which there are fixes. I using it right now and its solid and as stable as can be
shingers5 said:
Havoc 2.0 is epic on this phone guys. I have been using for over a month now and its solid. Few issues were BT audio and adaptive brightness for which there are fixes. I using it right now and its solid and as stable as can be
Click to expand...
Click to collapse
is wifi hotspot and google cam working as well?
can you confirm when you free please
also did you wipe system while installing that gsi image?