Hello,
Recently I wanted to reset my phone and I accidentally deleted my OS. I tried to install a custom rom called [ROM][6.0] Stock B370 | Stock FF-Edtion (prerootet). It went horribly wrong because my phone got into a bootloop and I cant get it into fastboot/rescue mode. I hope someone can help me because I haven't seen my home screen for days.
pim8181 said:
Hello,
Recently I wanted to reset my phone and I accidentally deleted my OS. I tried to install a custom rom called [ROM][6.0] Stock B370 | Stock FF-Edtion (prerootet). It went horribly wrong because my phone got into a bootloop and I cant get fastboot/rescue mode. I hope someone can help me because I haven't seen my home screen for days.
Click to expand...
Click to collapse
You need to flash these four images through fastboot.
System.img
Boot.img
Cust.img
Recovery.img
You can obtain these images from official firmware. Just extract it using Huawei update extractor.
---------- Post added at 10:50 AM ---------- Previous post was at 10:48 AM ----------
Suleiman01 said:
You need to flash these four images through fastboot.
System.img
Boot.img
Cust.img
Recovery.img
You can obtain these images from official firmware. Just extract it using Huawei update extractor.
Click to expand...
Click to collapse
Link for Huawei update extractor
https://goo.gl/aSMU9M
Suleiman01 said:
You need to flash these four images through fastboot.
System.img
Boot.img
Cust.img
Recovery.img
You can obtain these images from official firmware. Just extract it using Huawei update extractor.
---------- Post added at 10:50 AM ---------- Previous post was at 10:48 AM ----------
Link for Huawei update extractor
Click to expand...
Click to collapse
I cant get it into fastboot mode as I said in the post, I think it is a problem with the ROM
pim8181 said:
I cant get it into fastboot mode as I said in the post, I think it is a problem with the ROM
Click to expand...
Click to collapse
You flashed a P8 rom. Also connect your device to a computer and while doing this hold volume down.
VenityZ said:
You flashed a P8 rom. Also connect your device to a computer and while doing this hold volume down.
Click to expand...
Click to collapse
That does not work...
pim8181 said:
That does not work...
Click to expand...
Click to collapse
put your original firmware to sdcard with dload folder with other phone or with sdcard adapter then put sdcard to phone and hold both volume keys and power button and when the huawei logo pops keep holding every button for like 12 seconds and release power button and keep holding volume keys until it starts restoring/ emui thing comes to screen
gabrielkor00 said:
put your original firmware to sdcard with dload folder with other phone or with sdcard adapter then put sdcard to phone and hold both volume keys and power button and when the huawei logo pops keep holding every button for like 12 seconds and release power button and keep holding volume keys until it starts restoring/ emui thing comes to screen
Click to expand...
Click to collapse
Where can I find the original firmware and which version should I download?
pim8181 said:
Where can I find the original firmware and which version should I download?
Click to expand...
Click to collapse
From herehttps://goo.gl/UZDrbe
That depends upon your model no. and country
Suleiman01 said:
From herehttps://goo.gl/UZDrbe
That depends upon your model no. and country
Click to expand...
Click to collapse
Which firmware number should I download and which android version should I download?
pim8181 said:
Which firmware number should I download and which android version should I download?
Click to expand...
Click to collapse
maybe you should download lollipop and then choose the country
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
pim8181 said:
Which firmware number should I download and which android version should I download?
Click to expand...
Click to collapse
and then choose the model like (L-03, L-21 or L-23) <- choose what you have
gabrielkor00 said:
maybe you should download lollipop and then choose the country
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
and then choose the model like (L-03, L-21 or L-23) <- choose what you have
Click to expand...
Click to collapse
That doesn't quite work, I am just pressing all the button and after like 12 seconds stop pressing the power button. What am I doing wrong?
pim8181 said:
That doesn't quite work, I am just pressing all the button and after like 12 seconds stop pressing the power button. What am I doing wrong?
Click to expand...
Click to collapse
when the huawei logo comes start counting
---------- Post added at 06:57 PM ---------- Previous post was at 06:55 PM ----------
pim8181 said:
That doesn't quite work, I am just pressing all the button and after like 12 seconds stop pressing the power button. What am I doing wrong?
Click to expand...
Click to collapse
and after 12 seconds release power button and hold only volume keys for few seconds until it something shows up
gabrielkor00 said:
when the huawei logo comes start counting
---------- Post added at 06:57 PM ---------- Previous post was at 06:55 PM ----------
and after 12 seconds release power button and hold only volume keys for few seconds until it something shows up
Click to expand...
Click to collapse
Should I connect it to my PC, a power source or nothing?
pim8181 said:
Should I connect it to my PC, a power source or nothing?
Click to expand...
Click to collapse
no
gabrielkor00 said:
no
Click to expand...
Click to collapse
It will not show the Huawei logo if I do not connect it to a power source
pim8181 said:
It will not show the Huawei logo if I do not connect it to a power source
Click to expand...
Click to collapse
well you can try, but dont plug that your computer then it wont work
gabrielkor00 said:
well you can try, but dont plug that your computer then it wont work
Click to expand...
Click to collapse
How long should it take for the emui screen to show and does it show if I have the wrong custom ROM installed?
pim8181 said:
How long should it take for the emui screen to show and does it show if I have the wrong custom ROM installed?
Click to expand...
Click to collapse
that b370 is meant for p8 model not p8 lite and watch and skip to about 5 minutes https://youtu.be/aU-CA58p3rw
gabrielkor00 said:
that b370 is meant for p8 model not p8 lite and watch and skip to about 5 minutes https://youtu.be/aU-CA58p3rw
Click to expand...
Click to collapse
That does not work for me, is it because I installed a custom ROM for a Huawei P8? What can I do else to solve the problem?
Related
Ihad CM7, after it i've installed CM9 was working properly until the last upgrade (the last epsylon build) now my phone is stucked at the google logo, i've tried to connect the phone to the pc, bbut RSD doesn't recognise it, what should i do?
and i can't access to the recovery, pressing power botton+vol up/vol down, doesn't work....
orzata said:
and i can't access to the recovery, pressing power botton+vol up/vol down, doesn't work....
Click to expand...
Click to collapse
last update for défy or défy +?
becareful because it's not the same kernel
coelho_ said:
last update for défy or défy +?
Click to expand...
Click to collapse
Defy Update (I've a defy)
orzata said:
Defy Update (I've a defy)
Click to expand...
Click to collapse
put off you battery and try angain
coelho_ said:
put off you battery and try angain
Click to expand...
Click to collapse
i've do this many times, at waited also for minutes, but the phone i stucked at the google logo, and don't want to enter in recovery mode!
orzata said:
i've do this many times, at waited also for minutes, but the phone i stucked at the google logo, and don't want to enter in recovery mode!
Click to expand...
Click to collapse
there no led bleu it's all right?
---------- Post added at 02:27 PM ---------- Previous post was at 02:17 PM ----------
orzata said:
Ihad CM7, after it i've installed CM9 was working properly until the last upgrade (the last epsylon build) now my phone is stucked at the google logo, i've tried to connect the phone to the pc, bbut RSD doesn't recognise it, what should i do?
Click to expand...
Click to collapse
not necessary to see thre boot loader , just push volume + and power and connect at the computer
coelho_ said:
there no led bleu it's all right?
---------- Post added at 02:27 PM ---------- Previous post was at 02:17 PM ----------
not necessary to see thre boot loader , just push volume + and power and connect at the computer
Click to expand...
Click to collapse
Just tried, but nothing is happened :\ sh*t!
Are you stuck on the Android Logo with a Triangle?
benad10 said:
Are you stuck on the Android Logo with a Triangle?
Click to expand...
Click to collapse
No,on the google logo, and the phone doesn't respond if i try to press power b+ vol up/down :S
I had a similar problem but had it all solved when I loaded a bootmenu. I had the blue light back, the vol up and down were all working back again. It is why I asked if you were having same Android image like mine...I couldn't bypass it or do anything
orzata said:
Just tried, but nothing is happened :\ sh*t!
Click to expand...
Click to collapse
try to reinstal driver motorola
and look at that http://forum.xda-developers.com/showpost.php?p=24099113&postcount=8
orzata said:
and i can't access to the recovery, pressing power botton+vol up/vol down, doesn't work....
Click to expand...
Click to collapse
Hi,
If u r unable to enter into boot recovery mode means
use RSDLite.enter into bootloader mode.U should able to enter into bootloader mode.
First press the volumeup button and press power button together then u should able to enter bootloader after that use RSDLite
coelho_ said:
try to reinstal driver motorola
and look at that http://forum.xda-developers.com/showpost.php?p=24099113&postcount=8
Click to expand...
Click to collapse
could you pass me a link where i can download the motorola drivers? i don't know where search them, thanks all for the advices
ok, finally i was able to start my phone with bootloader, which version of android should i install?
http://forum.xda-developers.com/showpost.php?p=15341774&postcount=8
ok i've followed this guide but i'm stuck cause the nandroid backup's link doesn't work, i'm becoming mad, i don't know what to do to restore my phone..the eclair sbf is the only one working on my phone, the other doesn't work..
im gur.co m/W8IHxGf
^ please remove the spaces to use it.
I believed my droid x is bricked..
I have tried to use MANY different types of SBF files and using RSD lite to originally downgrade so i could put cyanogen mod on it now no matter if the rsdlite thing passes or not (And i've tried sbfflash or whatever it is called on linux and ive tried live cds and live usbs)
any sbf file i try it always crashes or goes back to this screen!
I've been trying for atleast a day now to fix it with no results.. Please help..
use Droid_X_621-ezSBF.iso
or 1FF-p3a_shadow_cdma_shadow-user-2.3.4-4.5.1_57_DX8-51-120111-test-keys-signed-Verizon-US.sbf
---------- Post added at 11:53 PM ---------- Previous post was at 11:45 PM ----------
and you have to wipe data in android recovery, if you bootloop
Android Recovery: with phone powered off,
press and hold home button, then press your power button,
hold till you see a triangle on the screen w/ android andy,
then press both volume buttons (on froyo it's search)
scroll with volume buttons, select with power button
Use the quide to hotwire your phone and sbf it to the 621 update.
sd_shadow said:
use Droid_X_621-ezSBF.iso
or 1FF-p3a_shadow_cdma_shadow-user-2.3.4-4.5.1_57_DX8-51-120111-test-keys-signed-Verizon-US.sbf
---------- Post added at 11:53 PM ---------- Previous post was at 11:45 PM ----------
and you have to wipe data in android recovery, if you bootloop
Android Recovery: with phone powered off,
press and hold home button, then press your power button,
hold till you see a triangle on the screen w/ android andy,
then press both volume buttons (on froyo it's search)
scroll with volume buttons, select with power button
Click to expand...
Click to collapse
my droid x is bricked, and rsd lite wont read the phone.
secretwolf98 said:
my droid x is bricked, and rsd lite wont read the phone.
Click to expand...
Click to collapse
bricked how?
sd_shadow said:
bricked how?
Click to expand...
Click to collapse
I installed AOKP 4.4.4 1 year ago, that's made for this phone. And the Bootstrap is broken and it won't show, so, right now, I can't boot into TWRP. AOKP 4.4.4 broke the Bootstrap.
secretwolf98 said:
I installed AOKP 4.4.4 1 year ago, that's made for this phone. And the Bootstrap is broken and it won't show, so, right now, I can't boot into TWRP. AOKP 4.4.4 broke the Bootstrap.
Click to expand...
Click to collapse
What does the bootloader say?
sd_shadow said:
What does the bootloader say?
Click to expand...
Click to collapse
It just stays at the Motorola logo for 5 minutes. Then it goes to the AOKP bootanimation, and it sticks there for ever. When you say the bootloader, do you say like where you flash the .sbf files? There is no Bootstrap anymore. Bootstrap doesn't show anymore.
secretwolf98 said:
It just stays at the Motorola logo for 5 minutes. Then it goes to the AOKP bootanimation, and it sticks there for ever. When you say the bootloader, do you say like where you flash the .sbf files? There is no Bootstrap anymore. Bootstrap doesn't show anymore.
Click to expand...
Click to collapse
You will have to flash the stock firmware (.sbf)
Sent from my PH-1 using XDA Labs
sd_shadow said:
You will have to flash the stock firmware (.sbf)
Sent from my PH-1 using XDA Labs
Click to expand...
Click to collapse
I try to, but RSD Lite on my computer doesn't read the phone. I have correct drivers installed.
secretwolf98 said:
I try to, but RSD Lite on my computer doesn't read the phone. I have correct drivers installed.
Click to expand...
Click to collapse
what does it say on the phone?
sd_shadow said:
what does it say on the phone?
Click to expand...
Click to collapse
Let me look tonight after school.
Hi.
First of all: yes, I'm stupid . Now let's get on with it and solve the problem. If you give me the solution I'll buy you dinner (PayPal). You should also be aware that I'm quite UNfamiliar with expressions and procedures such as flashing, adb, frp, fastboot, etc. Yes, I repeat, I'm stupid . Here is my story:
1. Bought a Huawei Nova in Germany and brought it to Brazil.
2. A few days ago tried a manual upgrade creating a dload folder on the phone and copying a update.app file into it (got it somewhere in this forum).
3. Power + vol up + vol down starts installation that stops at 52%.
4. Power + vol up shows a screen with factory reset and cache clearing options. It only shows very fast, and I'm unable to choose any of them. If by chance the reset option is chosen it does not seem to work. The phone just boots into recovery mode.
5. Power + vol down with the phone NOT connected to a PC leads do recovery mode. It does not recovers anything. It connects to wifi, but also with error msgs at the end.
6. Power + vol down with the phone conncted to a PC leads to Fastboot&Rescue Mode. Below the android image it reads: PHONE Locked, FRP Lock
7. When connected to a PC HiSuite opens, but that's about it.
Guess that's it. Waiting for help.
Correct me if im wrong but,first step you put update app in dload the 3 button flash.....
After flash is done you remove the content of dload then you put the rest of the zip in the dload then re do the 3 button flash for the rest of the update
AGAIN,IM NOT 100% SURE but...
---------- Post added at 06:56 PM ---------- Previous post was at 06:54 PM ----------
look here... and at METHOD 2
http://ministryofsolutions.com/2017...ougat-b300-firmware-update-canada-rogers.html
Partially right
virusdunil said:
Correct me if im wrong but,first step you put update app in dload the 3 button flash.....
After flash is done you remove the content of dload then you put the rest of the zip in the dload then re do the 3 button flash for the rest of the update
AGAIN,IM NOT 100% SURE but...
---------- Post added at 06:56 PM ---------- Previous post was at 06:54 PM ----------
look here... and at METHOD 2
Url removed
Click to expand...
Click to collapse
Your first paragraph is correct. Only the first (sadly). After pressing the 3 buttons....bang....the trouble starts. The process never comes to an end and notning else seems to work.
i can fix it 100% guaranteed , just contact me through personal message
mutahharbashir said:
i can fix it 100% guaranteed , just contact me through personal message
Click to expand...
Click to collapse
Why not sharing the solution here so everyone who would have the same problem could benefit?
#Henkate said:
Why not sharing the solution here so everyone who would have the same problem could benefit?
Click to expand...
Click to collapse
I think everyone knows about dc-phoenix
Sent from my HUAWEI MT7-TL10 using XDA-Developers Legacy app
Not sure they have any functionality for the Nova besides unlocking at this point.
My link got deleted bu...search for ministry of solution on google and youll find what you need
I have successfully unbricked this phone using dc-phoenix,
But lost imei, that i am gonna fix soon
Sent from my HUAWEI MT7-TL10 using XDA-Developers Legacy app
VKY-AL00C00 P10, Unable to boot after a magisk 14 update, any long button press combination result in a red led flash and any long power button press result in a vibration and red led flash. Cannot boot into anything!!! Plz help!!!!!!
I have tried the HWOTA method but fastboot is impossible to access, the dload method doesnt seem to work either since there is no reaction from the vol up +down +power combo.
jalk44 said:
VKY-AL00C00 P10, Unable to boot after a magisk 14 update, any long button press combination result in a red led flash and any long power button press result in a vibration and red led flash. Cannot boot into anything!!! Plz help!!!!!!
Click to expand...
Click to collapse
Have you tried booting into erecovery and doing a system restore from there?
_Lithium_ said:
Have you tried booting into erecovery and doing a system restore from there?
Click to expand...
Click to collapse
Yes, but like what i have mentioned , none of the key stroke work at all. All i get are some red led flashes and a vibration with no image showing up at all.
Are you sure that you phone has not just ran outta battery?
_Lithium_ said:
Are you sure that you phone has not just ran outta battery?
Click to expand...
Click to collapse
It was on 70 percent when i charged it first before the magisk update and i have been trying to charge the phone for a while now so i dont think so, but i am not certain as flashing tend to use a lot of battery.
I also flashed several imgs extracted from the official huawei update package beforehand and installed the magisk update in TWRP.
jalk44 said:
I also flashed several imgs extracted from the official huawei update package beforehand and installed the magisk update in TWRP.
Click to expand...
Click to collapse
did you solve it? I have same problem.
some solution
:crying:some solution my huawei p10 plus is dead
Here's my final solution... because the partitioning was destroyed.. i took it back to huawei customer service and because my phone was under warranty, and the fact that they could not verify if the bootloader was unlocked 'since the bootloader software no longer exist on the device' they repaired it under warranty with a free motherboard replacement...
Try the dload method if the keystroke (power button plus volume + and -)works
Geris said:
:crying:some solution my huawei p10 plus is dead
Click to expand...
Click to collapse
ohhh you are not expert i have same last 4 months my huawei p10 plus is dead wait battery drain 0% hold power 1 min then hold vol down + plug USB enter fastboot then if you have BOOT.img RECOVERY.img SYSTEM.img
type fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
this is worked for me 100%
Gamkutopolowk said:
ohhh you are not expert i have same last 4 months my huawei p10 plus is dead wait battery drain 0% hold power 1 min then hold vol down + plug USB enter fastboot then if you have BOOT.img RECOVERY.img SYSTEM.img
type fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
this is worked for me 100%
Click to expand...
Click to collapse
Okay, thank you very match, but how will it drain the battery if it does not start?
Geris said:
Okay, thank you very match, but how will it drain the battery if it does not start?
Click to expand...
Click to collapse
if you have battery 0% or if you have not start? try hold vol down + plug USB if work or not ?
Gamkutopolowk said:
if you have battery 0% or if you have not start? try hold vol down + plug USB if work or not ?
Click to expand...
Click to collapse
My English is very poor, please, type a detailed tutorial, this way you can really help man!
When my phone die, battery was on 70%, and I can't do anything, my phone it's completely dead!
---------- Post added at 01:33 AM ---------- Previous post was at 01:29 AM ----------
Geris said:
My English is very poor, please, type a detailed tutorial, this way you can really help man!
When my phone die, battery was on 70%, and I can't do anything, my phone it's completely dead!
Click to expand...
Click to collapse
he flashes a screen quickly, the computer does not show that he connected, he was 70% battery when he died
---------- Post added at 01:50 AM ---------- Previous post was at 01:33 AM ----------
https://youtu.be/AMPtLlMMogM
---------- Post added at 02:01 AM ---------- Previous post was at 01:50 AM ----------
https://www.youtube.com/watch?v=82vH9n604QA
ah your battery 70% because boot or fastboot is freezed still wait battery 0% then try against
Geris said:
My English is very poor, please, type a detailed tutorial, this way you can really help man!
When my phone die, battery was on 70%, and I can't do anything, my phone it's completely dead!
---------- Post added at 01:33 AM ---------- Previous post was at 01:29 AM ----------
he flashes a screen quickly, the computer does not show that he connected, he was 70% battery when he died
---------- Post added at 01:50 AM ---------- Previous post was at 01:33 AM ----------
https://youtu.be/AMPtLlMMogM
---------- Post added at 02:01 AM ---------- Previous post was at 01:50 AM ----------
https://www.youtube.com/watch?v=82vH9n604QA
Click to expand...
Click to collapse
I have same problem,do u resolve this?
Nelix said:
I have same problem,do u resolve this?
Click to expand...
Click to collapse
I could not solve
Just to be clear, none of you actually have the same problem as I did....
So in trying to fix magisk I accidentally flashed a corrupted boot.img and messed up erecovery, which will make it impossible to interact with the phone in any way except to open it up physically. As Partitioning is broken, therefore I took it to huawei repair in China, who did a motherboard for free before asking what roms I used (seriously).
If I was in one of your situations where erecovery is not broken (the thing that's tells u to download and recovery when volume up and power is pressed) in the recovery2 partition on nougat. It would be a matter of simply pressing download and fixing the problem automatically.
Also to be clear my p10 plus has been through hell as I flashed it 20 times that week due to safety net problems so it could have also been that (according to the technician) I simply fried the motherboard.
If this is not what you did or encounter then I repeat YOU ARE NOT HARD BRICKED! and there is a factory provided method for fixing your problems without resorting to flashing.
First: if your bootloader is unlocked, there will be a bootscreen telling you to press vol up to enter erecovery. If you can do that then problem solved, use the download function to repair your phone (it will lock your bootloader showing that I was never unlocked, as well as format data and all other partitions, so your will lose twrp or any custom recovery)
Btw: in oreo the recovery for huawei is located at ramdisk_recovey partition, and the erecovery partition can no longer be written to which in essence makes the china edition of these phones unbrickble as long as u didnt fry anything.
If erecovery doesn't work for you, try routing your wifi through a vpn that changes your ip to China, that will guarantee it to works as well as faster download(hicloud servers are in China).
Idk about the European and international variants but I have done this more the 40 times on my mate 9 pro and p10 plus, the only time I corrupted anything was by flashing images, SO ONLY DO FLASHING AS A LAST Resort.
My phone is bricked and I was thinking about flashing it via adb fastboot, but I cant since my bootloader is locked, I tried to get the code but it is asking me for info which I can only get with phone turned on, is there anything I can do?
I got IMEI only, but I also need Product Model, Product Serial number, Product ID. (I can access those only in settings and in dial pad if I am not wrong).
See the back of phone, what type of model is? VNS-???
SPLT said:
See the back of phone, what type of model is? VNS-???
Click to expand...
Click to collapse
VNS-L21 (single sim)
1mbb23 said:
VNS-L21 (single sim)
Click to expand...
Click to collapse
Ok, do you have installed the driver or Hisuite?
1mbb23 said:
My phone is bricked and I was thinking about flashing it via adb fastboot, but I cant since my bootloader is locked, I tried to get the code but it is asking me for info which I can only get with phone turned on, is there anything I can do?
I got IMEI only, but I also need Product Model, Product Serial number, Product ID. (I can access those only in settings and in dial pad if I am not wrong).
Click to expand...
Click to collapse
Reflash stock rom using dload method. It doesn't require an unlocked bootloader.
Here's how to do it: CLICK HERE . Read carefully
I've the same problem now, but I cannot enter ind load mode. my p9 lite not shutdown. if I hold power button it reboot but non load or recovery mode. only fastboot mode. but I haven't enabled developer option so I can't unlock bootloader. how can I do?
---------- Post added at 03:35 PM ---------- Previous post was at 03:34 PM ----------
dariomrk said:
Reflash stock rom using dload method. It doesn't require an unlocked bootloader.
Here's how to do it: CLICK HERE . Read carefully
Click to expand...
Click to collapse
but I hav unlock code for boot loader
croccio said:
i've the same problem now, but i cannot enter ind load mode. My p9 lite not shutdown. If i hold power button it reboot but non load or recovery mode. Only fastboot mode. But i haven't enabled developer option so i can't unlock bootloader. How can i do?
---------- post added at 03:35 pm ---------- previous post was at 03:34 pm ----------
but i hav unlock code for boot loader
Click to expand...
Click to collapse
DID YOU READ THE THREAD I POSTED IN THE LINK ABOVE?!?!?
•No?
•Okay, then read it carefully, BECAUSE I'M NOT HELPING THROUGH PERSONAL MESSAGES!
it cannot enter in dload mode
edit:
if press power off button for 10 sec it restart.
is there any way to turn off it?
---------- Post added at 03:51 PM ---------- Previous post was at 03:49 PM ----------
dariomrk said:
DID YOU READ THE THREAD I POSTED IN THE LINK ABOVE?!?!?
•No?
•Okay, then read it carefully, BECAUSE I'M NOT HELPING THROUGH PERSONAL MESSAGES!
Click to expand...
Click to collapse
yes I've read it, but cannot enter in dload mode with vol - and power. it restart infinite
croccio said:
it cannot enter in dload mode
edit:
if press power off button for 10 sec it restart.
is there any way to turn off it?
Click to expand...
Click to collapse
When your phone restarts press volume + and volume - only!
dariomrk said:
When your phone restarts press volume + and volume - only!
Click to expand...
Click to collapse
I've tried so:
how power off
when screen is black press vol - and vol + and power
boot logo appear and vibrate
than after few sec logo disappear than vibrate and appear logo.
if press only vol+ and vol- it vibrates two times
it stuck with logo
•Hold power button until you feel a vibration
•Immediately press and hold volume +&- untill your phone doesn't start updating from the dload folder on your sdcard
dariomrk said:
When your phone restarts press volume + and volume - only!
Click to expand...
Click to collapse
dariomrk said:
•Hold power button until you feel a vibration
•Immediately press and hold volume +&- untill your phone doesn't start updating from the dload folder on your sdcard
Click to expand...
Click to collapse
it vibrates two times but nothing dload
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
if you want I can make video, maybe I wrong something
croccio said:
it vibrates two times but nothing dload
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
if you want I can make video, maybe I wrong something
Click to expand...
Click to collapse
I can't. Wait for help from someone elsw
dariomrk said:
•Hold power button until you feel a vibration
•Immediately press and hold volume +&- untill your phone doesn't start updating from the dload folder on your sdcard
Click to expand...
Click to collapse
please help me my phone doesn't start at all ... what can i do i have faild flashing it ... is there any hope for me ??
:crying::crying:
Try this: conect the phone to charger or USB, hold power + vol Up and there you will join to erecovery and choose shutdown, if this not appear try without charger.
i have mate 10 lite same problem,bootloader is locked so can i use dload method,and where to get the stock firmware
I have executed these commands and after from this moment, the screen of my device is black and which key or combinations of keys I press nothing works..
Code:
fastboot flash preloader preloader_begonia.bin
fastboot flash lk lk.img
fastboot flash lk2 lk.img
Disconnected the cable, connected the cable, holding the keys for a longer period, holding them for a short period. Only power key, only volume up/down, combining power with volume. Nothing works. When connecting it to the computer, I do see device manager constantly refreshing. But both fastboot and adb are not finding any devices.
When holding the power button for more then 10 seconds, I do feel a small vibe but thats all. Nothing further happens, also not when connecting it to the PC or disconnecting it from the PC.
Anyone any idea what I could to to fix this?
Josjr said:
I have executed these commands and after from this moment, the screen of my device is black and which key or combinations of keys I press nothing works..
Code:
fastboot flash preloader preloader_begonia.bin
fastboot flash lk lk.img
fastboot flash lk2 lk.img
Disconnected the cable, connected the cable, holding the keys for a longer period, holding them for a short period. Only power key, only volume up/down, combining power with volume. Nothing works. When connecting it to the computer, I do see device manager constantly refreshing. But both fastboot and adb are not finding any devices.
When holding the power button for more then 10 seconds, I do feel a small vibe but thats all. Nothing further happens, also not when connecting it to the PC or disconnecting it from the PC.
Anyone any idea what I could to to fix this?
Click to expand...
Click to collapse
Wrong section bro...
-Alf- said:
Wrong section bro...
Click to expand...
Click to collapse
Oh sorry, where should I post this then?
Josjr said:
Oh sorry, where should I post this then?
Click to expand...
Click to collapse
Xiaomi Redmi Note 8 Pro