Note 4 snapdragon Getting Hot - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi guys,
I have purchased Note 4 recently and it seems to be heating in minimal tasks also like surfing the internet. i have flashed KITKAT, LOLLIPOP(default) and MARSHMALLOW but in all these firmwares the problem seemed to be consistent. Earlier i used snapdragon phone which was clocked at 2.3 GHZ and used to heat @ heavy games like No Limits, with recording on but this one is heating in angry birds itself. Though no lags are observed. I have not tried the Marshmallow version latest yet but some body told that latest update fixed heating issue. The root problem i see is its Processor clocked @ 2.7 GHZ, i mean this much we see in PC. I dont understand why they have gone so far. Now Samsung kernel must be clocked such way that on demand it bumps the frequency to max. This max i want to limit to 2 GHZ but without knocking down KNOX warranty. If some one has latest updated Marshmallow release and can confirm that it is indeed not heating please comment or tell me the solution to this problem, i really like this phone but hate when it heats. I am ok with slight lagging due to underclocking. i am willing to flash kernels with lower max frequency via ODIN. No custom recovery intended. Also i dont want to loose on warranty.
Thanks and Regards,
Really looking forward to solution
Ankit

xdatechie said:
Hi guys,
I have purchased Note 4 recently and it seems to be heating in minimal tasks also like surfing the internet. i have flashed KITKAT, LOLLIPOP(default) and MARSHMALLOW but in all these firmwares the problem seemed to be consistent. Earlier i used snapdragon phone which was clocked at 2.3 GHZ and used to heat @ heavy games like No Limits, with recording on but this one is heating in angry birds itself. Though no lags are observed. I have not tried the Marshmallow version latest yet but some body told that latest update fixed heating issue. The root problem i see is its Processor clocked @ 2.7 GHZ, i mean this much we see in PC. I dont understand why they have gone so far. Now Samsung kernel must be clocked such way that on demand it bumps the frequency to max. This max i want to limit to 2 GHZ but without knocking down KNOX warranty. If some one has latest updated Marshmallow release and can confirm that it is indeed not heating please comment or tell me the solution to this problem, i really like this phone but hate when it heats. I am ok with slight lagging due to underclocking. i am willing to flash kernels with lower max frequency via ODIN. No custom recovery intended. Also i dont want to loose on warranty.
Thanks and Regards,
Really looking forward to solution
Ankit
Click to expand...
Click to collapse
well i had the same problem in LP but with MM the heating problem is gone. You might have a defective device.
Sent from my SM-N910G using Tapatalk

Amar.B said:
well i had the same problem in LP but with MM the heating problem is gone. You might have a defective device.
Sent from my SM-N910G using Tapatalk
Click to expand...
Click to collapse
Thanks , but i have got replacements and all of them heated in marshmallow, but i didnot try thr latest patch of marshmallow. So according to you in Marshmallow its not heating at all right?

xdatechie said:
Thanks , but i have got replacements and all of them heated in marshmallow, but i didnot try thr latest patch of marshmallow. So according to you in Marshmallow its not heating at all right?
Click to expand...
Click to collapse
Yeah don't worry, mine has been replaced too actually twice in one week
i asked around and i found out that the heating issue is normal. just flash the latest august security patch
Sent from my SM-N910G using Tapatalk

Related

Laggyish Galaxy S5 SM-G900F 16GB LTE

Hello! just got the S5 G900F with LTE i noticed a lot of lag and the device is not running smooth as my old Note 2 for example.. what could possibly be the problem? thanks in advance!
Never really had a lag problem but try debloating or flashing a debloated rom. There are methods that preserve knox warranty via odin if you're worried about that. Have a look around, I'm sure you will find what you're looking for. If you're on about games then thats that's due to crappy upscaling of the cpu, find a kernel with the ondemandplus gov or lower thenup thresholds on your preferred gov. Flashing a custom kernel WILL void knox! Good luck with lagwiz!!
Hi and thank you for answering
Currently using stock rom but my friend hasbthe octa version and never had any problems
It running smooth butter.
Iv disabled programs but the Ram usage is still too high which i belive can cuase laggish performance..
GUARDIANBD said:
Hi and thank you for answering
Currently using stock rom but my friend hasbthe octa version and never had any problems
It running smooth butter.
Iv disabled programs but the Ram usage is still too high which i belive can cuase laggish performance..
Click to expand...
Click to collapse
Its not the ram its bloat. Even debloated my usage is quite high, normal linux behavior
i know the behvior of linux os yeah its normal but does "laggish" is normal too??
i'v changed it to OPO today and im happy

Bad 3d performance on lolipop (Exynos)

Hello,
Short story: On 5.0.1 (bob4 or boc3) the 3d score in antutu is about 7k. On 4.4.4 I get over 15k. Even in 3dmark I get 20k on 4.4.4 and 11k on lolipop.
In some games (like asphalt 8) I see a struttering (But I can't see a difference between lolipop and kitkat performance).
I heard that is a gpu bug that lock the freq. to 350mhz, it's true?
would also like to know about this as i am planning to get the exynos version too
cap-shoot said:
Hello,
Short story: On 5.0.1 (bob4 or boc3) the 3d score in antutu is about 7k. On 4.4.4 I get over 15k. Even in 3dmark I get 20k on 4.4.4 and 11k on lolipop.
In some games (like asphalt 8) I see a struttering (But I can't see a difference between lolipop and kitkat performance).
I heard that is a gpu bug that lock the freq. to 350mhz, it's true?
Click to expand...
Click to collapse
It is a known bug in current lollipop build (bob4, boc3), for some reason phone is stuck in power saving mode. Use kitkat for better performance, lollipop for better visual experience.
Still I don't understand why this issue is random??? I asked a few users on another forum and they don't have this bug.
Had the same issues here:
1st lollipop antutu scores - 49k (overall), 16k (3d)
2nd and ahead lollipop antutu scores - 39-42k (overall), 7.5k (3d).
I have no idea why it changed.
I have the exynos variant.
I'm running the new boc5 lollipop and getting 51,432 on antutu
cap-shoot said:
Still I don't understand why this issue is random??? I asked a few users on another forum and they don't have this bug.
Click to expand...
Click to collapse
It's not really a bug, but a more conservative throttle-threshold. You can easily test this out by putting your phone somewhere cold for about 5 minutes and then running the benchmarks. The problem is though that in BOB4/BOC3 the throttle level was just way too conservative which caused games like asphalt 8 not to run at speeds greater than 350Mhz. This was solved in BOC5, so just update if you want KItKat level performance.
Toss3 said:
It's not really a bug, but a more conservative throttle-threshold. You can easily test this out by putting your phone somewhere cold for about 5 minutes and then running the benchmarks. The problem is though that in BOB4/BOC3 the throttle level was just way too conservative which caused games like asphalt 8 not to run at speeds greater than 350Mhz. This was solved in BOC5, so just update if you want KItKat level performance.
Click to expand...
Click to collapse
I have no boc5 for my country. Is this a custom rom or official update?
erlyneto said:
I have no boc5 for my country. Is this a custom rom or official update?
Click to expand...
Click to collapse
BOC5 is an official rom yes. You can usually find the official ROMs in the general section.
And you could give me a link to some as a good custom rom, or officially, because I tried one BOC5, but still had a problem with efficiency.

[Q] Note 4 lags after lollipop update.

My N910H lags in games after I updated it to stock 5.0.1.
I play Modern Combat 5 it was smooth in Kitkat now it's really laggy.
I got 50k in Antutu with Kitkat, now it's 38-42k.
Can someone help me? I'm a heavy gamer and I want the best performance in games. Or should I downgrade to Kitkat?
Thanks for your help!
Things I already tried:
- Factory reset (2x)
- Power saving mode is OFF.
- Turning off bluetooth, sync, location, and nfc.
- Reinstall Antutu.
- Reinstall MC5
My device is unrooted and Knox warranty status is 0x0.
Benchmarks don't really mean anything for Christ sake....if your games don't play smoothly then just downgrade to kitkat and wait for Samsung to hopefully updated our devices with a newer and better working version of Lollipop.
I had the g3 and boy did they screw the pooch on that one! The device got so slow and battery life was considerably worse! This was the 32/3gb version... Hopefully samsung won't mess this up big time.
All other scores looks fine.. Except for 3d graphics.
Man i have the same problem here it seems that the phone is always in power saving mode and the gpu is limited to 350 mhz instead of 700 mhz. Also the cpu runs at 1.3 ghz instead of 1.9 for the big cores thats why it has low score in antutu hope somebody figures out a solution and also this is a bug in this update
Sent from my SM-N910H using XDA Free mobile app
I have the same problem guys with my n910f. It starts after lollipop update. Did you try kitkat, it works now as it should?
TheW7U11 said:
I have the same problem guys with my n910f. It starts after lollipop update. Did you try kitkat, it works now as it should?
Click to expand...
Click to collapse
Try doing a factory reset if you have't done it already.
It didnt work.
i updated my N910H too and i confirm the lag too, perhaps i will downgrade, will give it more time.

Overheating SD810 -Software fix (28.0.A.7.24 SPG712)

Hello Community,
my german Z4 Tablet (SGP712) was on 28.0.A.6.2 and got really hot sometimes, especially when I was downloading some gigabyte from PlayStore. Extended Stamina-mode brought no cooler CPU.
I unlocked my bootloader for helping a dev to root our device.
After installing 28.0.A.7.24 the CPU is much cooler, no more hot. So I went back to 28.0.A.6.2 and it was "hot" again.
Back on 28.0.A.7.24, everything is fine.
Please note that 28.0.A.7.24 is not available in all countries, yet.
Do you think they have introduced some throttling?
I read very much about it and there is no 2nd revision of SD810. All changes are made by software.
Maybe it was a bug of the Sony Firmware? Why the hell should a device become hot of downloading from PlayStore... it was really hot. I downloaded all my apps at once. It takes more than 15 minutes. I suppose that all cores where working at the same time.
But on the other hand, Sony confirmed overheating issues of SD810 and promised a new firmware without overheating in a short time. New firmware is 28.0.A.7.24 and it has no overheating issues. As far as I know they let less cores working at the same time - do we need really 8 cores working at the same time for such things? Never...
But please keep in mind - UNLOCKING your BL deactivates some features like Screen Mirroring and some more...
GhostLeader said:
Hello Community,
my german Z4 Tablet (SGP712) was on 28.0.A.6.2 and got really hot sometimes, especially when I was downloading some gigabyte from PlayStore. Extended Stamina-mode brought no cooler CPU.
I unlocked my bootloader for helping a dev to root our device.
After installing 28.0.A.7.24 the CPU is much cooler, no more hot. So I went back to 28.0.A.6.2 and it was "hot" again.
Back on 28.0.A.7.24, everything is fine.
Please note that 28.0.A.7.24 is not available in all countries, yet.
Click to expand...
Click to collapse
What is your antutu score after the update?
GhostLeader said:
Hello Community,
my german Z4 Tablet (SGP712) was on 28.0.A.6.2 and got really hot sometimes, especially when I was downloading some gigabyte from PlayStore. Extended Stamina-mode brought no cooler CPU.
I unlocked my bootloader for helping a dev to root our device.
After installing 28.0.A.7.24 the CPU is much cooler, no more hot. So I went back to 28.0.A.6.2 and it was "hot" again.
Back on 28.0.A.7.24, everything is fine.
Please note that 28.0.A.7.24 is not available in all countries, yet.
Click to expand...
Click to collapse
Hello,
how did u unlock the bootloader
and
how did u root the device?
cheers
My antutu score is 57173 - 32 Bit version - no root available, yet... but soon.
I got my Z4 tablet from O2 on Thursday. It came with 28.0.A.7.27 installed. Used for 3 days so far with no heat issues.
Sent from my SGP771 using Tapatalk
Don't really understand antutu but I downloaded the app and ran it and it gave an overall score of 54963 on 64bit version
Sent from my SGP771 using Tapatalk
I have an German LTE version with 28.0.A.6.8 and no heat problem..
had installed 28.0.A.7.24 and when I run Antutu, midway the backside is heating too much.
is that everyone experiencing? I had installed CPU-Z and in idle condition it shows ~40 degrees average across - but during Antutu run midway it peaks to 80s and 90s and that when I see more hot on reverse.
are there any other aspects we need to check for heat issues?
GhostLeader said:
My antutu score is 57173 - 32 Bit version - no root available, yet... but soon.
Click to expand...
Click to collapse
u know something new about root?
btw
how did u unlock bootloader?
GhostLeader said:
I read very much about it and there is no 2nd revision of SD810. All changes are made by software.
Maybe it was a bug of the Sony Firmware? Why the hell should a device become hot of downloading from PlayStore... it was really hot. I downloaded all my apps at once. It takes more than 15 minutes. I suppose that all cores where working at the same time.
But on the other hand, Sony confirmed overheating issues of SD810 and promised a new firmware without overheating in a short time. New firmware is 28.0.A.7.24 and it has no overheating issues. As far as I know they let less cores working at the same time - do we need really 8 cores working at the same time for such things? Never...
But please keep in mind - UNLOCKING your BL deactivates some features like Screen Mirroring and some more...
Click to expand...
Click to collapse
Hi,
is there a list what will be deactivated by unlocking?
Thanks.
Guys, What is your usual screen-on-time when using this tablet? Can you achieve 7 hours?
martin1987 said:
Guys, What is your usual screen-on-time when using this tablet? Can you achieve 7 hours?
Click to expand...
Click to collapse
Would it really have been so hard to browse the other five non-sticky threads in this forum to see the thread entitled "Z4 Tablet battery life demolishes the competition!" before posting your question in multiple, completely non-related threads?
Here, I'll make it easy for you:
http://forum.xda-developers.com/z4-tablet/general/z4-tablet-battery-life-demolishes-t3119807
No, I won't post the answer here. Click the link where you will find the answer in the second sentence of the very FIRST POST.

Regarding heating

Hi,
My Xperia z3+ is in stock rom and it will updated to latest firmware and its getting heated upto 70 Celsius can u help me to resolve the issue
xpvijay said:
Hi,
My Xperia z3+ is in stock rom and it will updated to latest firmware and its getting heated upto 70 Celsius can u help me to resolve the issue
Click to expand...
Click to collapse
you cannot, downside of owning a snapdragon 810
unless you downclock all cores :fingers-crossed:
zemetal said:
you cannot, downside of owning a snapdragon 810
unless you downclock all cores :fingers-crossed:
Click to expand...
Click to collapse
Install Zack's kernel. Set CPU to darkness, under-clock big cores to 1.7, gpu 510 or 450. Sorry meant to quote OP.
30 minutes of continuous use on xda, YouTube, chrome etc
LMcR92 said:
30 minutes of continuous use on xda, YouTube, chrome etc
Click to expand...
Click to collapse
r u in stock rom or custom rom
did u check that aluminium foil fix ??
will it work or will it cause any damage to device??
xpvijay said:
r u in stock rom or custom rom
did u check that aluminium foil fix ??
will it work or will it cause any damage to device??
Click to expand...
Click to collapse
Stock 305. Custom kernel. I never attempted the foil fix, might end up with reception problems etc.

Categories

Resources