I just flashed unofficial lollipop (explay fresh) to my micromax a120. Everything seems to work fine but i am not able to boot into recovery mode. Whenever i try to do so, the phone restarts or just get stucked at boot logo of explay fresh. I have tried number of recoveries (ctr, cwm, twrp, phillz) but none of them seems to work. Even stock recovery is not opening with this rom. But with other roms (stock kitkat, cm12.1, cm13) every recovery is working. I tried searching on google but was not able to find a solution. If someone out there knows a fix, the help would be appreciated.
Phone info:
Model : Micromax A120 (4gb)
Rom info:
ROM OS Version: 5.1.x Lollipop by Ariafan
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Wiko Rainbow or clone
Based On: AOSP
Version: Stable
I would also like to know how to root this rom as i have tried kingroot but it doesnt seems to work and i cant flash root.zip as i am not able to boot in recovery. Any kind of help will be appreciated. Thank you
First of all, i installed this rom in past, i'm not faced any issue...
If are are Troubling: Try this:
First:
Install Stock ROM with spft.(use Format All + Download mode)
after then install Ariafan's ROM again with proper steps:
ROM:
fresh_l1_stable.rar Download.
Custom Recovery:
fresh_l1-kenzukie-twrp-5.1.img Download.
Flash Instructions:
Backup.
Download fresh_l1_stable.rar.
Unpack fresh_l1_stable.rar.
Flash ROM with SP Flash Tool(use Firmware Upgrade mode).
WARNING! ROM doesn't contain SuperSU or custom recovery. You need your own.
Enjoy
.
Original Thread:[ROM][S5501]Lollipop[Wiko Rainbow][UNOFFICIAL]
Note:
Thread closed on OP Request.
i am using the same rom with fresh_l1-kenzukie-twrp-5.1.img.
only this recovery work for me on arianfan or kenzuckie loolipop roms.
first flash rom, then power on ....run android.
then power off
flash only recovery with sp flash tool in download mode , then power on in recovery mode is ok
sometime recovery disapear, so just flash it again
goludr said:
First of all, i installed this rom in past, i'm not faced any issue...
If are are Troubling: Try this:
First:
Install Stock ROM with spft.(use Format All + Download mode)
after then install Ariafan's ROM again with proper steps:
ROM:
fresh_l1_stable.rar Download.
Custom Recovery:
fresh_l1-kenzukie-twrp-5.1.img Download.
Flash Instructions:
Backup.
Download fresh_l1_stable.rar.
Unpack fresh_l1_stable.rar.
Flash ROM with SP Flash Tool(use Firmware Upgrade mode).
WARNING! ROM doesn't contain SuperSU or custom recovery. You need your own.
Enjoy
.
Original Thread:[ROM][S5501]Lollipop[Wiko Rainbow][UNOFFICIAL]
Note:
Thread closed on OP Request.
Click to expand...
Click to collapse
First of all, many many thanks :laugh: flashing this recovery solved my problem. Can you help me with rooting this rom?
Update : thanks, i have rooted it.
vipin307 said:
First of all, many many thanks :laugh: flashing this recovery solved my problem. Can you help me with rooting this rom?
Update : thanks, i have rooted it.
Click to expand...
Click to collapse
Always Welcome
Related
Device : SM-910G
Recovery : TWRP
Previous ROM : CM 12.1 : cm-12.1-20150828-NIGHTLY-trltexx
My Phone is stuck in a bootloop after flashing Emotion_Revolution_R8_final.
BTW. I had Wiped Data,Cache,Dalvik Cache,System prior to installing Emotion_Revolution_R8_final.zip.
Not sure if I Need to Flash a kernel or something.
Its my first post on xda developers, Any help would be much appreciated.
I followed this post for understanding the flash procedure. http://forum.xda-developers.com/note-4/snapdragon-dev/twrom-emotion-revolution-note-iv-t2976107
You should flash only ROMs supported by your device (N910G).
Anyway, how you can read here after boe1 samsung firmware ROMs for N910F can be flashed to N910G if you have the right modem and bootloader.. If you want to use that ROM try flashing via ODIN this modem and bootloader for N910G and maybe you'll be able to use Emotion Revolution ROM
I'll Try and let you know. Thanks
you must check your Baseband
im prety sure you're still on BOB4 if you previously used CM 12.1, you must downgrade to BOB3 to install the ROM, flash the 5.0.1 " STOCK " Boot Loader and BOC3 Modem Via Odin and then flash the rom careful with this operation you must know exactly every step !!!
I am pretty new to android and I need help, Thanks.
I have unrooted note 3 exynos[N900] running on stock rom 5.0 lollipop but I want to flash a custom rom for which I need a CWM recovery but all the CWM recoveries for my device are available for Kitkat[4.4] and I am not sure will flashing the same recovery on my stock 5.0 is gonna work or not (and I don't wanna brick my device ). It will be of great help if someone helps me out finding a suitable CWM recovery. Thanks again
The recovery that needs to be installed on a phone needs to support the ROM that needs to be flashed.
That being said, an incompatible recovery will result in an error when flashing an incompatible ROM. Most note3 users are using TWRP to flash a custom ROM and make nandroid backups.
I recommend looking at the TWRP website (https://twrp.me/Devices/) and flash the latest release for the phone.
audit13 said:
The recovery that needs to be installed on a phone needs to support the ROM that needs to be flashed.
That being said, an incompatible recovery will result in an error when flashing an incompatible ROM. Most note3 users are using TWRP to flash a custom ROM and make nandroid backups.
I recommend looking at the TWRP website (https://twrp.me/Devices/) and flash the latest release for the phone.
Click to expand...
Click to collapse
Sir, all the TWRP recoveries are originally for kk .. will flashing the same on stock 5.0 work ??
The recovery is flashed according to the device, not the installed rom. The latest twrp should be fine with 5.0.
Thanks (Y)
audit13 said:
The recovery is flashed according to the device, not the installed rom. The latest twrp should be fine with 5.0.
Click to expand...
Click to collapse
Okay Thanks :good:
audit13 said:
The recovery that needs to be installed on a phone needs to support the ROM that needs to be flashed.
That being said, an incompatible recovery will result in an error when flashing an incompatible ROM. Most note3 users are using TWRP to flash a custom ROM and make nandroid backups.
I recommend looking at the TWRP website (https://twrp.me/Devices/) and flash the latest release for the phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2454079 can you please say if it's okay to flash this cwm recovery... I am a bit doubtful since the recovery filename has "kk" as a substring (kitkat) in it.
I believe 6.0.4.7 is the last version of cwm released for the device. If you want to get the latest for your device, check out https://www.clockworkmod.com/rommanager
I rooted my SM-G7102 using KingoRoot App for Windows.
Later I installed Twrp recovery using Odin 3.10.7 :http://forum.xda-developers.com/galaxy-grand-2/orig-development/twrp-unofficial-twrp-recovery-t2798433
Booted into recovery, did a factory reset and tried installing Resurrection Remix: http://forum.xda-developers.com/galaxy-grand-2/orig-development/rom-resurrection-remix-m-v5-6-7-t3360391
It installed successfully I latter install 6.0 micro gapps as advised on the ROM's Page and rebooted however it just showed me Sammy BootLogo and then a blue screen and then restarted again
I later did a complete format including /data and also tried installing CM13 unofficial: http://forum.xda-developers.com/galaxy-grand-2/orig-development/cm-13-0-ms013g-cyanogenmod-13-grand-2-t3299635
however same results.
Another alter I tried was installing both ROMs mentioned above without GAPPS however it didn't work too!
Would love to recieve some help, Thanks.
[EDIT]
p.s: I was using Samsung's Stock Andorid v4.3 firmware before flashing.
Also here is my recovery log: https://gist.githubusercontent.com/ArchKudo/ab4738a2482121fde280643fc86b5ab6/raw/0cae8a800552fc331d841bd1a6798c9a41e524ec/recovery.log
[EDIT 2]
It worked! Installed 4.4.2 and re-flashed
Flash 4.4.2 firmware
Then flash custom roms
Igor2906 said:
Flash 4.4.2 firmware
Then flash custom roms
Click to expand...
Click to collapse
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
noobno.NaN said:
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
Click to expand...
Click to collapse
Yeah use TWRP
me2 facing same problrm but i have first install from official 4.4.2 firmeware plz help
So I rooted my Samsung Galaxy J5 (SM-J500FN) by flashing CF-Autoroot with ODIN, and then I wanted to flash TRWP so I could install XPosed Framework.
After flashing TRWP with no errors on ODIN, if I try to reboot normally or in recovery the screen slowly turns green?
I managed to get into Download mode and connected to ODIN, but I cannot flash a new ROM as you cannot flash .zip files. (I have a LineageOS rom and my Stock ROM with build number J500FNXXU1BQA4)
up2 said:
So I rooted my Samsung Galaxy J5 (SM-J500FN) by flashing CF-Autoroot with ODIN, and then I wanted to flash TRWP so I could install XPosed Framework.
After flashing TRWP with no errors on ODIN, if I try to reboot normally or in recovery the screen slowly turns green?
I managed to get into Download mode and connected to ODIN, but I cannot flash a new ROM as you cannot flash .zip files. (I have a LineageOS rom and my Stock ROM with build number J500FNXXU1BQA4)
Click to expand...
Click to collapse
The screen turns green when you flash the wrong TWRP (not corresponding to your Android version) or when you flash Lollipop roms over Marshmallow and vice versa (except MM/N cm/aosp roms which must be flashed on LP).
You can flash only stock rom (.tar format file) with Odin.
TWRP for lollipop 5.1.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 .
TWRP for Marshmallow 6.0.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 .
Flash the correct TWRP according to your Android version. I believe you must reflash stock rom with Odin first since you're screen is turning on, but try to flash the correct TWRP first and see if you get rid of your problem. If not, then reflash stock rom and then flash TWRP again.
#Henkate said:
The screen turns green when you flash the wrong TWRP (not corresponding to your Android version) or when you flash Lollipop roms over Marshmallow and vice versa (except MM/N cm/aosp roms which must be flashed on LP).
You can flash only stock rom (.tar format file) with Odin.
TWRP for lollipop 5.1.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 .
TWRP for Marshmallow 6.0.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 .
Flash the correct TWRP according to your Android version. I believe you must reflash stock rom with Odin first since you're screen is turning on, but try to flash the correct TWRP first and see if you get rid of your problem. If not, then reflash stock rom and then flash TWRP again.
Click to expand...
Click to collapse
Wow, thanks a lot.
The thread where I got the TWRP from didn't show that it was for 5.1.1, I flashed TRWP for 6.0.1 and my phone worked again and the TWRP works!
Thanks!!
I have a yu yureka running on cm11 kitkat stock rom on which i tired to flash twrp. I flashed the right files but now the phone is stuck in bootloop. How do i fix this? I tried searching a lot but the only solution i found was to flash the stock firmware. All the links to download files are broken. Can anyone help me? Im a newbie at this stuff.
Groverkss said:
I have a yu yureka running on cm11 kitkat stock rom on which i tired to flash twrp. I flashed the right files but now the phone is stuck in bootloop. How do i fix this? I tried searching a lot but the only solution i found was to flash the stock firmware. All the links to download files are broken. Can anyone help me? Im a newbie at this stuff.
Click to expand...
Click to collapse
Remove battery
Hold volume up
Insert battery
Connect usb cable
Enter fastboot command
Unlock bootloader
Flash twrp
Format data and cache
Flash custom ROM
Your method will not work
method will not work. I fixed it after a lot of trying.
Solution: Flash an old version of TWRP(like 2.8). Kitkat doesn't support the newer versions of TWRP. This is why flashing new TWRP doesn't work. Now install the stock ROM of KitKat cm11 and install Stock recovery. UPDATE cm 11 to cm12 using official updates using stock recovery. Now flash new TWRP and it will work. I don't use this site a lot but if you ever see someone askung this then this method will work.