Database Users

Stuck on installing TWRP

Hello and thanks in advance to everyone,
I am trying to root my moto g4 but I am stuck on installing a recovery. I did unlock the bootloader and when I turn on the phone i am greeted with"this device is unlocked and can't be trusted"
Yet when i try to flash the recovery it states that it failed to install since the package is unsigned:
C:\Users\Jelle\Desktop\Nieuwe map>mfastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (12496 KB)...
OKAY [ 0.405s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.344s]
finished. total time: 0.748s
Re-entering my unlock code also does not work as it gives me this message:
C:\Users\Jelle\Desktop\Nieuwe map>fastboot oem unlock NYRTWS*************
...
(bootloader) invalid boot state
OKAY [ -0.000s]
finished. total time: -0.000s
Does someone have any idea on what the issue is, am I missing something?
Thank you in advance!

Twrp is for motog4 plus aka athene. Make sure your device is the same.
Just reboot to recovery after you flash twrp using fast boot. Do not reboot your device to your home screen as your recovery partition will be rewritten with the stock recovery.
Do not worry about the message. It doesn't say that flashing failed. It only gives you a warning that it's not signed. That message is displayed even if you flash the stock recovery using fast boot.
Sent from my Moto G (4) using Tapatalk

Silesh.Nair said:
Twrp is for motog4 plus aka athene. Make sure your device is the same.
Just reboot to recovery after you flash twrp using fast boot. Do not reboot your device to your home screen as your recovery partition will be rewritten with the stock recovery.
Do not worry about the message. It doesn't say that flashing failed. It only gives you a warning that it's not signed. That message is displayed even if you flash the stock recovery using fast boot.
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
that totally worked! thank you very much

same problem mentioned above but after recovery mode my devicxe says no command.
help mw plzzz

sauravchandela95 said:
same problem mentioned above but after recovery mode my devicxe says no command.
help mw plzzz
Click to expand...
Click to collapse
If you're getting a screen with 'no command', that's the stock recovery on your device.
Are you rebooting to the recovery straight after flashing TWRP? Do you have an unlocked bootloader and what version of TWRP are you flashing? What commands are you using to flash?
You may wish to try booting with TWRP first:
1)On a device with an unlocked bootloader, boot to the bootloader screen.
2)Connect your device to your computer via a high quality USB data cable or the original USB cable.
3)Ensure your TWRP image is copied to your ADB folder.
4)Open an ADB terminal. Verify your device is communicating with your computer by typing 'fastboot devices' without quotes. Press Enter. You should get a serial number response.
5)If so, then type 'fastboot boot twrp.img' without quotes. Replace twrp.img with the actual full file name of your TWRP image in your ADB folder including the file extension. For example, if your TWRP image file name is shreps_twrp_3_1_1.img, the full command would be fastboot boot shreps_twrp_3_1_1.img You can type the first few letters of the file name and press Tab on your keyboard to automatically complete the file name if you so wish.
6)Press Enter, and your device should download TWRP and boot to TWRP.

Amazon Moto G4 bootloaders can't be unlocked?

I've followed a couple tutorials of that explain how to unlock Motorola's Moto G4 bootloader. This seems to be the "official" one from Motorola:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b
I copied part of it up to where I get stuck. Here it is:
Put your device in fastboot mode (power off, then press the power and volume down buttons simultaneously).
On your desktop, open a command prompt or terminal, and go to the directory where you installed the Android SDK tools (or make sure fastboot is in your $PATH)
At the prompt, type $ fastboot oem get_unlock_data
The returned string will be used to retrieve your unlock key.
Example: On a Windows Desktop, the returned string format would be $ fastboot oem get_unlock_data
(bootloader) 0A40040192024205#4C4D3556313230
(bootloader) 30373731363031303332323239#BD00
(bootloader) 8A672BA4746C2CE02328A2AC0C39F95
(bootloader) 1A3E5#1F53280002000000000000000
(bootloader) 0000000
****************************************
OK, so I just bought a Moto G4 for $125 on Amazon's prime day. This means that it has ads on the lock screen. I'm OK with that. But I think they also made the locked bootloader unlocakble as 3 times I've gotten this from a Windows machine in ADB mode:
(bootloader) Unlock data:
(bootloader) 3A45210407248602#
(bootloader) 5A59323233433246534C004D6F746F2047200000#
(bootloader) 1095EFAB6000EDC14660539C503A04F7900B9A01#
(bootloader) 9F93C800000000000000000000000000
There should be numbers in that first Bootloader line and then Motorola says:
You're device does not qualify for bootloader unlocking.
Has anybody else had this happen? This is my second time doing this to a Motorola phone and the Moto g2 was a snap! I was hoping to install a custom recovery like TWRP so I could get a nandroid backup while everything is new
Marty

LinuxHippy said:
You're device does not qualify for bootloader unlocking.
Has anybody else had this happen? This is my second time doing this to a Motorola phone and the Moto g2 was a snap! I was hoping to install a custom recovery like TWRP so I could get a nandroid backup while everything is new
Marty
Click to expand...
Click to collapse
A Lot of us have already unlocked our bootloader

Rempala said:
A Lot of us have already unlocked our bootloader
Click to expand...
Click to collapse
Do u have the Amazon moto g4?

I do and I unlocked my bootloader and rooted the phone already.

Yes I have the Amazon G4

Well, these posts gave me hope that I was repeating the same mistake and I was. Forth time worked to unlock the BL. I was deleting the # signs at the end of each line. That was the mistake. It should be this from 4 lines:
3A45210407248602#5A59323233433246534C004D6F746F2047200000#1095EFAB6000EDC14660539C503A04F7900B9A01#9F93C800000000000000000000000000
Now I'm trying to boot into the TWRP image I flashed with fastboot and fastboot gave me errors about it not being signed so I'm not sure it worked. Where are people here getting the Moto g4 TWRP images? I went here:
https://www.androidfilehost.com/?w=...23bf15e9165ccc3b437c48af2047195d3fae863dca817

This is what I get when I try to flash TWRP now and then reboot into it with adb:
C:\Users\Huntz\Downloads>fastboot devices
ZY223C2FSL fastboot
C:\Users\Huntz\Downloads>fastboot flash recovery twrp_athene_20160526.img
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (12498 KB)...
OKAY [ 0.398s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.344s]
finished. total time: 0.746s
C:\Users\Huntz\Downloads>adb reboot recovery
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: no devices/emulators found

Just FYI, Motorola's bootloader unlock website has a webtool that you can use to clean the output of get_unlock_data, so you'll only get the relevant info. Copy-paste the raw code into the tool, hit clean, copy paste the output into the unlock code line on the website, submit.
Regarding TWRP, yes I think everyone gets that "Image not signed or corrupt" message. Also, you can't "adb reboot recovery" from fastboot. Just flash it via fastboot, reboot into fastboot, then go into recovery.

Maybe it did install twrp OK since it still boots into the original stock ROM OK. How do u get into twrp with the buttons on the phone?

LinuxHippy said:
Maybe it did install twrp OK since it still boots into the original stock ROM OK. How do u get into twrp with the buttons on the phone?
Click to expand...
Click to collapse
Boot into fastboot (press and hold power + volume down, let go when the bootloader screen shows up), press down on the volume rocker twice, and it'll say "recovery mode" on the screen. Press power once and it'll boot into TWRP.

Something's wrong then. I get to the fastboot screen OK but when I go into recovery it says your device has been unlocked and can't be trusted. It will reboot in 5 sec and then I see a dead robot.
EDIT
it does boot OK into the stock ROM from there if u do nothing for a minute or two or if u just hold in power button for 15 secs to get a black screen and then release the button and hold it 4 secs to get a normal boot

Sounds like TWRP didn't flash correctly, or maybe was a bad download (can download directly from TWRP's website here: https://dl.twrp.me/athene/). Reboot back into fastboot and try flashing TWRP again (you might also want to try renaming it to recovery.img, so the flashing command would be "fastboot flash recovery recovery.img").

I'll try again later today-hopefully it works and thanks for the link
I'm gonna try doing adb in Linux too.

xtermmin said:
Sounds like TWRP didn't flash correctly, or maybe was a bad download (can download directly from TWRP's website here: https://dl.twrp.me/athene/). Reboot back into fastboot and try flashing TWRP again (you might also want to try renaming it to recovery.img, so the flashing command would be "fastboot flash recovery recovery.img").
Click to expand...
Click to collapse
When u reboot now, do u get a 5 second delay screen that says your device has been unlocked and can't be trusted?
Marty

LinuxHippy said:
When u reboot now, do u get a 5 second delay screen that says your device has been unlocked and can't be trusted?
Marty
Click to expand...
Click to collapse
Yes, that is normal for devices with unlocked bootloaders. You can get rid of it by rebooting into fastboot and following this guide: http://forum.xda-developers.com/showpost.php?p=67031810&postcount=5
(if you don't have mfastboot, you can use plain-old fastboot as well)

I'm puzzled-the md5 on twrp was right and I unlocked the BL OK. I'll try it in Linux later and see if it takes.

Might be worth trying another USB port or even another cable. Some people have issues when trying to flash things on a USB 2.0 phone plugged into a USB 3.0 port.

About how much time should it take to flash twrp? I don't think it even flashed anything yesterday because it was too quick.

LinuxHippy said:
About how much time should it take to flash twrp? I don't think it even flashed anything yesterday because it was too quick.
Click to expand...
Click to collapse
It is almost instantaneous. As for the booting into recovery and seeing the dead robot, that is probably due to the fact that the phone tries to re-write the recovery when you reboot automatically. Just flash the twrp.img, and then go to recovery from the bootloader without rebooting and you will be fine; just make sure you have whatever you want to flash (e.g. supersu) on your device storage when you get there.

Sounds like a plan! What's the md5 on the supersu file?

Moto g4 XT1625 install TWRP 3.0.2 fail, Image not signed or corrupt.

Moto g4 XT1625 install TWRP 3.0.2 fail, Image not signed or corrupt.
unlock boot loader ok,
Install TWRP 3.0.2 from official (twrp-3.0.2-0-athene.img 12.2M 2016-06-08 17:50:53 EDT) fail with these message:
(bootloader) Image not signed or corrupt
I tried again, not work. After that, reboot, try to enter recovery mode, only get "no command" message with a dead Android robot on the screen.
I wanna root this device, but can't install TWRP at all.
Please give some help.

1) Did you type in the right command?
fastboot flash recovery twrp.img
2) Did you download twrp from the official page? Did you try re-downloading the twrp file to make sure its not corrupted? Below is the link for twrp 3.0.2, directly from the official page of twrp.
https://dl.twrp.me/athene/
Please update me how it goes.

I had the same issue. Always got that message, but I reflashed it a few times until it eventually worked.

xtermmin said:
I had the same issue. Always got that message, but I reflashed it a few times until it eventually worked.
Click to expand...
Click to collapse
Glad to hear it worked

First of all, thanks for all the reply.
I will leave more detail and keep trying.
turn on usb debugging. --> ok
adb reboot bootloader --> ok
fastboot devices --> ok show devices
fastboot flash recovery recovery.img --> enter everything right but only got fail & pain T_T
// The message:
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (12496 KB)...
OKAY
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY
// end
Here, it said sending 'recovery' (12496 KB)...
which means, I guess it get that img file, but still fail.
By the way, some other user got the same problem and message.
I tried on XT1625 Moto g4, again and again, fail. close unnecessary program.
If I can unlock bootloader, hardly believe things could go south like this.
Maybe the key problem is
1 (bootloader) has-slot:recovery: not found
something must wrong, but where?
2 (bootloader) Image not signed or corrupt
XT1625 Moto g4, Moto g4 plus need different TWRP? But there's only one from TWRP official website.
I tried everything I can do, download again compare with md5 before I post.
I can't find way out.
Anyway, thanks alot.

updated, I'm not sure, but as you said, I tried again, suddenly, I could enter TWRP, I will try whether it work or not.
Another question is, after unlock bootloader, install TWRP, root. Can I update system or patch with OTA?
Thank you for reply and help.

funplay said:
updated, I'm not sure, but as you said, I tried again, suddenly, I could enter TWRP, I will try whether it work or not.
Another question is, after unlock bootloader, install TWRP, root. Can I update system or patch with OTA?
Thank you for reply and help.
Click to expand...
Click to collapse
Custom recovery and root break OTA. You might still get the notification that an OTA is available, but it won't be able to apply.

it never worked for me.
But the next command works:
fastboot boot twrp.img
funplay said:
updated, I'm not sure, but as you said, I tried again, suddenly, I could enter TWRP, I will try whether it work or not.
Another question is, after unlock bootloader, install TWRP, root. Can I update system or patch with OTA?
Thank you for reply and help.
Click to expand...
Click to collapse

I was having the same problem. I tried the RootJunkyremove amazon bloat script, and I was having all sorts of problems, Even getting into a boot loop for a while.
I was running without a recovery until I ran Rootjunky's root script, which seems to have fixed most things.

Unable to flash TWRP on Moto G4 Plus

I had previously rooted my Moto G4 Plus and used multiple custom ROMs before switching back to Stock firmware.
Now, I'm unable to flash TWRP on my device. Any attempts to flash TWRP ends up with the following error:
Code:
reboot bootloader
mfastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (12530 KB)...
OKAY [ 0.406s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.203s]
finished. total time: 0.608s
Any further tries to reboot via adb commands results in the following:
Code:
adb reboot recovery
error: device not found
adb reboot
error: device not found
adb reboot bootloader
error: device not found
The device says the bootloader is unlocked while rebooting. the ID field shows 'bad key'(I feel this is weird).
Can someone please help me with this?
Thanks

unknown_geek said:
I had previously rooted my Moto G4 Plus and used multiple custom ROMs before switching back to Stock firmware.
Now, I'm unable to flash TWRP on my device. Any attempts to flash TWRP ends up with the following error:
Code:
reboot bootloader
mfastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (12530 KB)...
OKAY [ 0.406s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.203s]
finished. total time: 0.608s
Any further tries to reboot via adb commands results in the following:
Code:
adb reboot recovery
error: device not found
adb reboot
error: device not found
adb reboot bootloader
error: device not found
The device says the bootloader is unlocked while rebooting. the ID field shows 'bad key'(I feel this is weird).
Can someone please help me with this?
Thanks
Click to expand...
Click to collapse
It has got flashed correctly as you got "OKAY" at end of command. Try to boot into recovery and tell us what happens.

1) That TWRP message of 'Image not signed or corrupt' is normal, since the TWRP custom recovery is not signed. After you see the [OKAY], reboot to recovery directly to fix the TWRP, else the stock recovery will overwrite it. Afterwards, you can boot as normal.
2)If you're still in the bootloader on your device, adb commands do not work - you need to use fastboot commands, or use your device volume keys to select 'Start' (to boot to system) or 'Recovery mode' (to boot to recovery) and press the power key to select. Of course, in this case, after flashing TWRP, you'll want to select 'Recovery Mode' in your bootloader and press the power key. This should then boot into TWRP.
If you find yourself in the bootloader in the future, then 'fastboot reboot' or 'fastboot continue' (both commands to be used without quotes, in the ADB terminal) may get your device rebooting to system.
3)ID Bad key is normal with an unlocked bootloader, on subsequent boots this may change to ID:N/A

echo92 said:
1) That TWRP message of 'Image not signed or corrupt' is normal, since the TWRP custom recovery is not signed. After you see the [OKAY], reboot to recovery directly to fix the TWRP, else the stock recovery will overwrite it. Afterwards, you can boot as normal.
2)If you're still in the bootloader on your device, adb commands do not work - you need to use fastboot commands, or use your device volume keys to select 'Start' (to boot to system) or 'Recovery mode' (to boot to recovery) and press the power key to select. Of course, in this case, after flashing TWRP, you'll want to select 'Recovery Mode' in your bootloader and press the power key. This should then boot into TWRP.
If you find yourself in the bootloader in the future, then 'fastboot reboot' or 'fastboot continue' (both commands to be used without quotes, in the ADB terminal) may get your device rebooting to system.
3)ID Bad key is normal with an unlocked bootloader, on subsequent boots this may change to ID:N/A
Click to expand...
Click to collapse
Hi @echo92,
Thanks for pointing out what I was doing wrong. I now realize that the TWRP recovery was being overwritten by stock recovery and I didn't know adb commands don't work while still in bootloader mode.
I did boot into recovery mode from the bootloader (using the volume buttons from the phone) and it worked.
And the ID: bad key is also gone and now it shows ID: N/A.
Thanks again for your help!
Regards

____Mdd said:
It has got flashed correctly as you got "OKAY" at end of command. Try to boot into recovery and tell us what happens.
Click to expand...
Click to collapse
Hi @____Mdd,
I rebooted into recovery right after flashing TWRP and it worked fine. Now, I'm able to boot into TWRP recovery.
Thanks for your response.
Regards.

Im Facing this issue while flashing TWRP
C:\adb>fastboot flash recovery twrp.img
(bootloader) has-slot:recovery: not found
(bootloader) is-logical:recovery: not found
Sending 'recovery' (12644 KB) OKAY [ 0.422s]
Writing 'recovery' (bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote: '')
fastboot: error: Command failed
Click to expand...
Click to collapse

vaibhavhr2010 said:
Im Facing this issue while flashing TWRP
Click to expand...
Click to collapse
Pre flash validation errors suggest that your bootloader is locked (i.e. you have not unlocked your bootloader, or it has been re locked). Can you confirm your bootloader is unlocked, e.g. if there is a warning screen on boot saying your device is unlocked?

echo92 said:
Pre flash validation errors suggest that your bootloader is locked (i.e. you have not unlocked your bootloader, or it has been re locked). Can you confirm your bootloader is unlocked, e.g. if there is a warning screen on boot saying your device is unlocked?
Click to expand...
Click to collapse
Thank You for the Reply!
Yes I have already unlocked the Bootloader.
The device status in Bootloader shows Device is Unlocked, Status Code: 3

vaibhavhr2010 said:
Thank You for the Reply!
Yes I have already unlocked the Bootloader.
The device status in Bootloader shows Device is Unlocked, Status Code: 3
Click to expand...
Click to collapse
Thanks, what device are you trying to flash TWRP to and which TWRP image are you using?

echo92 said:
Thanks, what device are you trying to flash TWRP to and which TWRP image are you using?
Click to expand...
Click to collapse
I'm Flashing my Moto G4 using the twrp-3.0.2-3-titan.

vaibhavhr2010 said:
I'm Flashing my Moto G4 using the twrp-3.0.2-3-titan.
Click to expand...
Click to collapse
That TWRP won't work, if it's for Titan. The codename for Moto G4/plus is athene, only TWRP images specifying athene in their name will work.
https://forum.xda-developers.com/mo...recovery-twrp-3-2-1-unofficial-touch-t3722206 or https://eu.dl.twrp.me/athene/ give these a try instead

messed up unlock.

Followed a tutorial on how to install lineage-14.1-20180817-UNOFFICIAL-cedric, but somehow missed a step or messed up.
I unlocked the bootloader, not exactly but in general: flashed the boot.img and rebooted, phone started and was able to use android.
But some strange problems occurred, like somehow my PIN was not recognized and device failed to factory reset.
Locked the bootloader again because of the warning (here's my mistake I guess) and now am unable to flash or revert to stock.
I am able to boot into android, did enable USB debug and bootloader unlock.
But everytime I boot I get the warning a different kernel has been installed (instead of wrong key before) and permission is always denied remotely.
C:\ad>fastboot flash logo logo.bin
Sending 'logo' (2186 KB) OKAY [ 0.068s]
Writing 'logo' (bootloader) flash permission denied
FAILED (remote: '')
Finished. Total time: 0.077s
This happens with everything, permission denied.
If I try to unlock it again via fastboot commandline (Windows) I get:
"(bootloader) invalid boot state"
Starting the phone in fastboot, the status is "flashing_locked".
What can I do now?
I am a noob, therefor the tutorial...
Thanks

thugscorpion said:
Followed a tutorial on how to install lineage-14.1-20180817-UNOFFICIAL-cedric, but somehow missed a step or messed up.
I unlocked the bootloader, not exactly but in general: flashed the boot.img and rebooted, phone started and was able to use android.
But some strange problems occurred, like somehow my PIN was not recognized and device failed to factory reset.
Locked the bootloader again because of the warning (here's my mistake I guess) and now am unable to flash or revert to stock.
I am able to boot into android, did enable USB debug and bootloader unlock.
But everytime I boot I get the warning a different kernel has been installed (instead of wrong key before) and permission is always denied remotely.
C:\ad>fastboot flash logo logo.bin
Sending 'logo' (2186 KB) OKAY [ 0.068s]
Writing 'logo' (bootloader) flash permission denied
FAILED (remote: '')
Finished. Total time: 0.077s
This happens with everything, permission denied.
If I try to unlock it again via fastboot commandline (Windows) I get:
"(bootloader) invalid boot state"
Starting the phone in fastboot, the status is "flashing_locked".
What can I do now?
I am a noob, therefor the tutorial...
Thanks
Click to expand...
Click to collapse
First, this thread is for g5 plus not for g5, so post in that thread.
Solution:- which firmware you are trying is it for g5 or g5+, if you flash wrong firmware then this happen, try downloading your firmware and then flash it.now you are on stock. If you don't know how to Flash, you can prefer XDA threads or use Lenovo Moto smart assistant app (pc) that will flash the firmware for you.
If you want to go on custom ROM then, first go to stock rom as it will restore your boot.img and custom ROM can work. If you directly want to go to custom rom (skiping above procedure) then flash boot.img from ADB or twrp and install custom ROM.
Here is the thread to Flash stock ROM:-
https://forum.xda-developers.com/g5...-flash-stock-romfactory-t3691396/post74221633
Link for Lenovo Moto smart assistant app:-
https://support.lenovo.com/in/en/downloads/ds101291
And if you are using XDA threads it has old firmware which can brick you Device you can get your firmware from here and chose which firmware channel you belong:-
https://mirrors.lolinet.com/firmware/moto/potter/official/
At last to not take risk remove bootloader and gpt commands from ADB.

It is a G5 Plus and I get permission denied with adb or fastboot.
In android I van go go developers option and OEM unlock is ON, if I go fastboot, flashing is locked.

thugscorpion said:
It is a G5 Plus
Click to expand...
Click to collapse
Well LOS14....-cedric is the G5 variant. You didn't flash the wrong firmware did you?

Apperently I did...
Is there a way to fix it?
the Lenovo recovery tool mentioned above doesn't do anything with the "flash" option.
Put the phone in fastboot mode and it is not recognized by the Lenovo application.
Can still manual send fastboot and adb via the Windows command line but still "locked" and "pemrission denied".

the command fastboot flashing unlock did the trick for now.
But, I want to revert to stock, what is the correct way?
Can someone point me to a good how to or tutorial with recent files?
EDIT: I see LineageOS officially is not supporting the G5 plus, but there is a unofficial version in the G5 plus forums.
I'm still thinking of customizing because of all the bloatware and sluggish performance.

reïnstalled TWRP, put Pixel Experience on an SD card, booted TWRP recovery, did several attempts to clean all data / cache etc. but got several errors, retried, rebooted, chose all options and installed Pixel.
First try phone did not boot, froze on Pixel boot, again wiped everything, again installed Pixel and now it boots.
good lesson.
Phone is not entirely recognized the correct way, google security speaks of a Moto X (4) and the phone itself mentions the exact model number instead of Moto G5 Plus.

thugscorpion said:
reïnstalled TWRP, put Pixel Experience on an SD card, booted TWRP recovery, did several attempts to clean all data / cache etc. but got several errors, retried, rebooted, chose all options and installed Pixel.
First try phone did not boot, froze on Pixel boot, again wiped everything, again installed Pixel and now it boots.
good lesson.
Phone is not entirely recognized the correct way, google security speaks of a Moto X (4) and the phone itself mentions the exact model number instead of Moto G5 Plus.
Click to expand...
Click to collapse
Yeah security does show as Moto X4. That's normal.

One final question: On reboot I always end up in the fastboot menu without holding power and volume down, I also always get the unlock warning.
Is this a sign the bootloader is still not okay?
And is there an easy way to fix it?