My s7 edge got stuck at boot screen so i reflashed stock rom and rerooted then restored the backup i had, it said fail because of low memory while restoring the system and now when i try to reflash the stock rom on odin it says model dismatch fail.
If someone could help me fix this I'm willing to pay something decent, but not a whole lot lol
Re-download the stock rom and flash it
Meboyzram said:
Re-download the stock rom and flash it
Click to expand...
Click to collapse
i did that lol thats when it says "model dismatch fail"
Do you have custom recovery?
Do you have a custom recovery?
Do you have the right and the newest Odin Version?
Did you try it with another transfercable or USB-Port?
Do you have the newest samsung drivers?
Did you have any Odin problems like this before?
My suggestion:
Just do a full wipe on your phone. Downlad the newest Odin Version. Get your device into download mode (maybe try different transfercables or USB Ports and the newest samsung drivers) and see if it works now.
If yes, flash the right Bootloader and Modem for your device and then flash the rom you wanted to flash.
If this didnt work, (and you have a custom recovery) try to reinstall the rom without any backups via the recovery at first and check afterwards, if the device is now recognized by Odin.
Good luck
JustAnotherAndroid said:
My s7 edge got stuck at boot screen so i reflashed stock rom and rerooted then restored the backup i had, it said fail because of low memory while restoring the system and now when i try to reflash the stock rom on odin it says model dismatch fail.
If someone could help me fix this I'm willing to pay something decent, but not a whole lot lol
Click to expand...
Click to collapse
I guess you still have twrp installed.
1. Step: go to TWRP and wipe everything except your SD-Card
2. Step: enter download mode on your device and then plug your usb in (maybe try a different usb-port or even another computer, or another usb cable)
3. Step:Flash the newest bootloader & modem in one step.
4. Step: Enter TWRP again and flash the firmware.zip via the installation process
I dont have TWRP, but i got it fixed, somehow my roomate got it, thanks anyways guys
So all he got was my phone to turn on, im still having this model dismatch fail issue..
Maybe You're trying to flash wrong firmware? What model did You buy?(check box) and what firmware did You download?
If nothing works then download 7zip. And remove all files from that tar.md5 file and leave system.img only. And then try reflashing it.
This way no matter what device You connect it should force flash this image file. Although it might be dangerous (a tiny little bit) so first make sure that You have proper firmware for Your model.
ProtoDeVNan0 said:
Maybe You're trying to flash wrong firmware? What model did You buy?(check box) and what firmware did You download?
If nothing works then download 7zip. And remove all files from that tar.md5 file and leave system.img only. And then try reflashing it.
This way no matter what device You connect it should force flash this image file. Although it might be dangerous (a tiny little bit) so first make sure that You have proper firmware for Your model.
Click to expand...
Click to collapse
Yes, I've used these files multiple times before i did what i did, ill give that a try, if it works, i owe you.
If system.img by itself will flash successfully and Your phone won't boot then add slowly more files to that tar file (boot.img, recovery.img etc)
You could also try looking for a pit file for Your phone and then flash it with it. Pit file usually fixes most problems even broken partitions.
And make sure that You put that tar file in AP/PDA.
If nothing above works then send me screenshots of ODIN and the file that You're trying to flash. Maybe I'll notice something. But I hope You'll fix it
JustAnotherAndroid said:
Yes, I've used these files multiple times before i did what i did, ill give that a try, if it works, i owe you.
Click to expand...
Click to collapse
So I tried, and i get some invalid file error
These are the files that are in the AP one
https://gyazo.com/a72785631ad62d412a8c40eb464d3126
I found out my problem, i was still uing the modified version of odin that i used to root my phone
Related
Forgive my noobishness. I've actually lurked xda boards for years and used the EXCELLENT user made guides for all my phones. However, I'm at a complete loss and nothing I've searched, read, or tried has worked and it's consumed my entire day and left me with no phone at all. I cannot believe this phone can be dead unless there's some physical problem so I'm really hoping someone can walk me back to normal.
I bought a new S4 from T-Mobile on Labor Day (obviously I'm in the US). 2 days ago I rooted it successfully using Jimmy Mcgee's video and the various links including mattlgroff's and k0nane's threads. No problems whatsoever. After I did that I used Ti Backup and backed up the apps just in case, then I ran the moderate version of the Truly Clean script and did a factory reset. Everything was perfect. Then...
My wireless data stopped connecting. But that's not my current problem.
I decided to unroot and go back to factory to a) see if something I did was causing the data issue or b) take it back for an exchange at the store. I started with the K0nane and the Samersh72 guides, but frankly tried so many things and failed I don't know were I went wrong. First I tried M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5
Then I tried Samsung-Updates.com-KERNEL-SGH-M919-TMB-M919UVUAMDL-1366964131.tar
Then I tried the one I did to root it OUDHS-Recovery-jfltetmo-1.0.3.3.tar
Mostly I have gotten a NAND writing fail in Odin with everything I tried (yes I tried making sure Kies is off, the original usb cable, and another PC) which then locks me out of the recovery boot screen and gives me some yellow triangle between a phone and a pc with an error about the stock firmware and tells me to connect to Kies. I can fix that by flashing this PIT file CSB_signed_Fusion3_EUR_0325_V2.pit which allows me to go back to the OUDhs recovery screen.
Also Kies will no longer connect to this device and it says driver install failure when I connect it to the PC (except it stell charges, using the stock cable still).
Dear god someone help me, and I will buy you a beverage. I'm doing instant email notifications of replies. PLEASE.
I'm not sunk yet. I'm rereading the FAQs and guides and I'm going to start over to where I was able to get the rooted version to work. I know the CWM recovery is working so we'll see.
Pull out battery for a while, then go to download mode (vol down+home+power) and flash stock fw in odin.
Wysyłane z mojego GT-I9505 za pomocą Tapatalk 2
diodaq said:
Pull out battery for a while, then go to download mode (vol down+home+power) and flash stock fw in odin.
Wysyłane z mojego GT-I9505 za pomocą Tapatalk 2
Click to expand...
Click to collapse
Ok I will try that. Also I am now trying to flash Samsung-Updates.com-SGH-M919-TMB-M919UVUAMDL-1366964131\M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5
I am getting a little farther in the Odin process but it still says fail right after
aboot.mbn
Also I originally followed Jonny's video and only flashed the cwm custom recovery though odin. I flashed the rooted zip file from my phone's internal sd card like in the video. Now I can't get to the internal memory so I tried saving the zip file (the one I used to root it) on the ext sd card. I'm unable to flash that rooted zip from the ext sd card because the phone wants to reboot as soon as it starts doing so.
Is there a way to flash that rooted zip file (or a stock one) from an external sd card?
Is there a way to flash that rooted zip file through odin?
All you have to do is get into download mode and flash stock mdl tar with odin. After it's finished, it'll go into recovery by itself and wipe some small cache partition by itself, after it does that, hold onto the volume up button and get into recovery again and do a factory reset. This is so you don't go into a bootloop. Now get CF auto root and flash it so ur rooted. Next flash a custom recovery and ur all set. It's really easy to do.
norml said:
All you have to do is get into download mode and flash stock mdl tar with odin. After it's finished, it'll go into recovery by itself and wipe some small cache partition by itself, after it does that, hold onto the volume up button and get into recovery again and do a factory reset. This is so you don't go into a bootloop. Now get CF auto root and flash it so ur rooted. Next flash a custom recovery and ur all set. It's really easy to do.
Click to expand...
Click to collapse
So far I have been totally unable to get odin to flash a stock tar or any tar since I did the first one 2 days ago. Always, fail.
mattwood440 said:
So far I have been totally unable to get odin to flash a stock tar or any tar since I did the first one 2 days ago. Always, fail.
Click to expand...
Click to collapse
Are you loading the stock tar by clicking PDA?
norml said:
Are you loading the stock tar by clicking PDA?
Click to expand...
Click to collapse
Yes. Also when it fails, it locks me out of the recovery mode. Can you tell me what happens when you flash a new PIT file? Doing that alone does not get a FAIL message and it brings back the recovery screen. However, when I select the pit file it automatically selects the re-partition option which the k0nane says is a no-no (at least for flashing the pda, not sure about the pit which is why I'm asking).
mattwood440 said:
Yes. Also when it fails, it locks me out of the recovery mode. Can you tell me what happens when you flash a new PIT file? Doing that alone does not get a FAIL message and it brings back the recovery screen. However, when I select the pit file it automatically selects the re-partition option which the k0nane says is a no-no (at least for flashing the pda, not sure about the pit which is why I'm asking).
Click to expand...
Click to collapse
Pit file basically means repartitining the storage chip of your device. Yes odin will automatically check repartition when flashing pit files. Flashing pit file is serious business. I recommend following the unbrick/ unroot thtead in the general section. Its pretty precise and I think since you are getting repeated fails in odin you will have to flash pit file.
You will be fine if you follow the instructions there precisely.
Sent from my GT-I9500 using xda app-developers app
OMG it worked. K0nane's procedure worked on a different pc. Dowloaded a fresh Kies but didn't install any of the extra stuff with it. Downloaded, extracted, and ran odin as admin. Hooked it up. Downloaded and extracted the UVUAMDL tar. Put that in the pda box and hit start. Mine would immediately FAIL but this one kept working, and working, and working and reboote. Why why why? I've been at this for about 16 hours. That makes no sense. Thanks anyway. I'll try the other root method when I'm feeling brave again.
Hello all,
I have a S4 in my hands.
Now the history of the Phone is as follows:
Customer tried to take out the sim card by force. And broke the metal plate.
Yesterday I replaced the microsim/sim slot. Testing the full Phone and ready to go.
Today I go back to the end customer for the same device.
It keeps rebooting after the samsung galaxy S4 white screen. And keeps going.
This is what I tried:
Updating to newest rom - no luck
Plugigng in into pc by cable - keeps rebooting with only showing the battery icon.
Try to go in recovery mode - not possible
Going into download mode - works
The little smash trick of YouTube (smash to table gently with side of power button down) - don't work
Any suggestions?
So you are the employee that fixes phones and don't know what to do with a bootloop, but do know how to replace a simslot? I am somewhat confused..
A bootloop always has some cause.. check init.d script or so.
Code:
adb wait-for-device
adb shell chmod 000 /system/etc/init.d/*
at least get an adb connection and logcat,
Code:
adb wait-for-device
adb logcat -C
else you cannot say anything about the problem since you don't know the cause. (if debugging is disabled unpack boot.img and make changes in ram disk for enabling debugging/adb, then repack and reflash)
If download mode works just flash a custom recovery first, make a nandroid backup (make sure you secure the files whenever possible, since there is the nasty symlink "/data/media/" which is actually just /sdard. so if you wipe data manually it the nandroid backup will be gone), then try to do factory reset, if it doesn't work still, just reflash stock rom with odin + factory reset.
oh and for the record, the simslot being broken is not the cause of the bootloop, just that you know.
Hi,
When you say "updating to newest ROM" do you mean that you flashed stock ROM again via Odin? If not, then that's my suggestion for you, but first I'd try factory resetting it via stock recovery.
~Lord
Thank you for Your kind reply.
Yes indeed, I fix a lot, but I have and know my limits. . I've tried a lot to pass the boot loop.
But if it's not possible to fix it for me. Than its better to ask.
I will try a custom rom. And keep you informed. Thank you.
Installing a rom with odin din't help. I got na Green PASS but bootloop keeps running.
Installing CWM did not help allso, it give me a PASS, but I can't enter recovery.
So, how do I get acces to init.d ?
If recovery mode doesn't work and the device keeps rebooting, try to flash stock ROM with Odin and put the .PIT file after checking 'Re-Partition'
iJo09 said:
If recovery mode doesn't work and the device keeps rebooting, try to flash stock ROM with Odin and put the .PIT file after checking 'Re-Partition'
Click to expand...
Click to collapse
Thank you, I will try.
Can you give me a link to a stock rom with a pit file including?
The Chaser said:
Thank you, I will try.
Can you give me a link to a stock rom with a pit file including?
Click to expand...
Click to collapse
ROM and PIT file vary by model. What is the S4's one?
iJo09 said:
ROM and PIT file vary by model. What is the S4's one?
Click to expand...
Click to collapse
I have I9505
In this thread http://forum.xda-developers.com/showthread.php?t=2265477 you can find what you need. Flash the latest German XXUGNF1 firmware and use the .PIT file provided in the thread
iJo09 said:
In this thread http://forum.xda-developers.com/showthread.php?t=2265477 you can find what you need. Flash the latest German XXUGNF1 firmware and use the .PIT file provided in the thread
Click to expand...
Click to collapse
Just ready. got a green pass in odin. But still the same, and not able to go in recovery.
Maybe a hardware malfunction? Can I test that somewhere?
Retry with the same procedure a couple of times... if this doesn't solve problems, then it's an hardware fault
let me start by saying I've read almost all your threads only reason im actually bothering is because I'm really feeling like smashing my phone to bits .... that's how frustrating this has been. my phone was rooted and custom ROM till about 4 weeks ago, when Tmobile told me the IMEI on my phone was reported as stolen ... i grabbed my box as my phone i have since it was new and compared the IMEI ... to my surprise IMEI on box and on Phone chasis was not same as the one inside phone .... my phone was unblocked by a local unblocking service here in PR so i went to them and surely they took my phone and lent me another one while it was getting fixed ... "IMEI" was being changed again and it wasn't the one on the box either ... the gave me lame excuse about my IMEI .... they kept my note 3 for a week almost 2 after i got it back my note 3 said it was rooted but i couldn't use any apps for rooted phones as it would say i didn't have root access ... as i no longer trust these people i went on and tried fixing the issue myself ... and here's the thing i have tried absolutely everything cf auto root tar from download mode and even thru odin all versions of odin and using the sm-n900w8 cf auto root and the right roms "different one's to see if it was the rom's or the phone" i am about to give up i simply cannot root my phone so that i can install a modified rom ... thought of contacting you guys ... as my last resort ... i am so sorry to bother i know you guys are very busy ... but if you guys cant help i will have to settle for just a regular note 3 and that sucks... i have picture of absolutely everything i have tried and the outcome and the errors i have gotten and all in pics if needed...
Please pardon me for asking for a little help i really thought i could done this i guess i am not as savvy as i have thought...
Thanx in advanced Emilio Pinella
Does the IMEI on the box match the IMEI on the label attached to the battery compartment?
Have you tried using Odin to get back to a completely stock ROM, flash TWRP, and flash supersu from TWRP?
Ok here we go ...
Yes IMEI on box and phone chasis are same ... the different one is when you press *#06# ...
Secondly i have tried usin odin but absolutely all the files i downloaded are in .zip and odin does not recognize any of them i tried to convert from zip to .tar but it crashes odin thats why i have tried it from recovery mode ... even CF auto flash for sm-n900w8 doesnt work odin does recognize phone so it isnt a driver issue ... maybe if i had apropiate files in right format i could try flashing from odin ... but i dont and i cant find the files in .tar which is what odin recognizes ... as i said i have really tried almost everything ... i have been wondering can it be possible these people lock my phone in a way i could not do anything? ... will wait for your replay ... my phone sucks @The Moment i havent downloaded anything as i am factory resseting everytime i try a new method ... just fyi i do activate devops and usb debug after each wipe ...
Use 7zip or WinRAR to extract the zip from sammobile.com. Once unzipped, it should give you a tar. md5 file.
hello again...
well i was certain of my answer but before i started writing i had doubts so i went and open all the files i have for flashing with odin ... and yes none of my .zip files have any .tar files in them , i have no clue why they are zip files if they are intended for use with odin ... so i went to sammobile.com and yes i had downloaded the 3 files pertaining to my cel phone and tried flashing the stock rom but none of them worked ... some just werent recognized and some gave me whole file signature error or signature failed error ...
i have Tesla-hlte-5.1.1.High_Voltage.2.1-Release-20150824 and its a zip and has no .tar, inside also have cm-12.1-20150423-UNOFFICIAL-temasek-hlte-V10.4 and also no .tar inside and its in .zip format, also have X-Note_Build_15_ND5_Public and yes its a zip and no tar inside...
SM-N900W8-4.4.2-(KOT49H.N900W8UBUCNI1) is my original ROM and it does not have .tar inside ....
something they all do have in common is they have an img file inside that cannot be open ...
and i downloaded files for twrp but jajaja also in zip and no tar inside , just an image file wich is not recognized by odin and not recognized by recovery mode either as i have tried putting all these files in my sd card and have tried doing from recovery ending with results of .... whole file signature failed and signature failed error and also wrong footer error i have pic of all this ... would you want me to send them to you i wouldnt mind... btw thx for your time i really apreciate it.
If the files came from sammobile.com, they are defnintely tar. md5 files.
How many times are you unzipping the file from sammobile.com? The original file from sammobile.com should only be unzipped once.
Well after last replay i went and downloaded all 4 available files for my note 3 from the one dating at 2013 to the one with 5.0 lolli i will do this again tonight and will post the results ... i am certain they will be the same as last time but can you please remind me of steps to take using odin and which odin should i use as i have a few versions .
Once again thx for your time .
I like Odin 3.07 which is what I always use.
If you use Odin 3.07, put the phone into download mode, open Odin 3.07, place the tar.md5 file in the PDA box, uncheck everything except f.reset time, connect phone to computer, flash, when you see the word "RESET" in the status window, remove USB cable, remove battery, replace battery, use button to boot into recovery, perform a factory reset, wipe cache, reboot.
Ok
I will do this from home as soon as i get there and i will post results any specific one you would want me to start with?
Start with a rom that matches the bootloader currently on the phone.
Ok
Hmmm is bootloader the number after model example UBUCNC1?
Yeah just checked and bootloader would be for my current 4.4.2 N900W8UBUCNC1 .... Also says that latest firmware is one of the firmware i downloaded the one containing lolli 5.0
So you downloaded the cnc1 from sammobile.com and there is no tar.md5 file after unzipping?
Just got home
I got home im unzipping and i will let you know in about 2 minytes if there are tar.md5 inside what i downloaded ...
Ok so far so good
All have .tar.md5 in them so i will try flashing with same rom version i have 4.4.2 to see if then i can root and flash a cutom rom ... tell you in a few minutes how it went... wish me luck.
ok finished
i finally got to flaSH WITH odin and now my phone is 5.0 lolli ... can you guide me on how to flash root with odin as cf auto root does not work i took picture of what it did when i tried to auto root tell me where to send it .... or can you tell me where or who might have tesla 5.1.1 high voltage rom or X-note in .tar.md5 format ...
once again thanks for your time and understanding all i need now is to be able to root it so that i may install custom rom after i actually find them in .tar.md5 format.
Find twrp here
http://forum.xda-developers.com/showthread.php?t=2494245
Get the latest 2.8.7 or any 2.x.x 4.4 .tar.
Then get SuperSu flashable. You can google that.
Flash twrp with odin.
Flash SuperSU.zip with twrp.
It's rooted.
If you want to flash a custom rom just flash the rom of your choice in twrp. No need to root first.
Sent from my SM-G925F
Root is not required if you want to install a custom ROM, just install a custom recovery. I recommend flashing TWRP.
Find TWRP for your device from here (make sure you download the tar version of TWRP): http://teamw.in/Devices/
Supersu 2.46 is here: https://download.chainfire.eu/696/SuperSU Download and save Supersu to either the internal or external memory. If you put supersu on an external memory card, power off the phone and put the card into the phone.
Boot the phone into download mode.
Open Odin and uncheck everything except f.reset time.
Click on PDA/AP button and put TWRP into the box.
Connect the phone and flash TWRP in Odin.
When you see the word "RESET" in the status window, remove the USB cable, remove battery, replace battery, boot into recovery, flash Supersu, and reboot.
Ok will do now and tell you if anything ... but i read somewhere this version of android is unflashable ... but i will try what you are saying .
Which version of Android is not flashable?
Ok i gotta say if it wasnt for you i would still be stuck ... fortunetly i am riding 5.0 lolli and my phone is now officially rooted all i need to do is get tesla's 5.1.1 high voltage on it and i will be good ... so basically just need tesla in .tar.md5 to be good ... all thx to you .
Where can i download it or now that i have twrp as my recovery can you guide me thru on that? ... thx again.
Hi guys,
I had a rooted galaxy s4 I9505, which I tried to encript before selling. After 10 hours the encripting did not finish so I rebooted it and ended up with a bootloop, that I tried to foolishly solve by going to the TWRP menu and formatting the device, the OS was lost and since then I am unable to bring it back to life. I am trying to flash a new rom with jOdin because it keeps saying that the PIT file that my phone shows is corrupt, I tried different versions of jOdin and two different computers. Kies and the like are uninstalled. I tried downloading PIT files online with no luck.
Do you guys have any suggestions? I am really lost after wasting 2 days on this.
Many thanks...
Try downloading the official firmware from sammobile. And flash using odin. That should work
soyuz4u said:
Try downloading the official firmware from sammobile. And flash using odin. That should work
Click to expand...
Click to collapse
Thanks Soyuz4u, but Odin keeps saying that has found a corrupted file (either the PIT file or another) and does not even start flashing.
Has anyone had this problem before?
Can't you flash a rom via TWRP? I managed to soft brick my device last night with Mobile Odin. It wiped my recovery and OS. I just flashed TWRP back with normal Odin and restored my rom backup.
Have you googled to see if there is a pit file for the memory configuration of your phone?
Galaxy user said:
Thanks Soyuz4u, but Odin keeps saying that has found a corrupted file (either the PIT file or another) and does not even start flashing.
Has anyone had this problem before?
Click to expand...
Click to collapse
Try a different USB cable / port. That error is related to that a lot of the time.
Thanks for the replies guys. I couldn't flash a new ROM with TWRP because it kept saying that the .md5 file could not be found, no matter what I did. I downloaded some PIT files online but did not find something specific to my phone memory config.
I'll give it a go in a Windows platform with different USB ports to see if that helps.
Thanks again!
Galaxy user said:
Thanks for the replies guys. I couldn't flash a new ROM with TWRP because it kept saying that the .md5 file could not be found, no matter what I did. I downloaded some PIT files online but did not find something specific to my phone memory config.
I'll give it a go in a Windows platform with different USB ports to see if that helps.
Thanks again!
Click to expand...
Click to collapse
I don't think you have any clue what you are doing.
You say you have TWRP on your device. Then download a custom rom and flash it with TWRP.
- What do you mean with .md5 file cannot be found? You never ever use a .md5 file with TWRP. You only need to flash a .zip.
- Are you running Odin in a virtual machine? That will not work. Jodin is also outdated if i'm not mistaken.
SOLVED NOW! I installed the latest Odin on WIndows and flashed the Rom with no problem. I was unaware of Odin being outdated for Mac. Thanks all for your help again.
ok so let me start by saying im not the best tech savy person here but a few months i rooted my sm-g550t1 with twrp and everything was fine i do not know what happened but i erased something im thinking a parition or partition that when i went to reboot my phone it said their was no os on it i tried to fix it via odin and i cant remember exactly what happen but i got the emergency firmware blue that would allow me to do any but put it into download mode from the i flashed twrp back on to the phone now im trying to flash it back to stock firmare gain i really dont know what im doing in odin it say sboot.bin then fail when i go into twrp and try to flash custom rom it says so systlink not extracted or something like im all out of ideas i need some one to walk me thru step by step on how to get my phone back up and running
tjanon said:
ok so let me start by saying im not the best tech savy person here but a few months i rooted my sm-g550t1 with twrp and everything was fine i do not know what happened but i erased something im thinking a parition or partition that when i went to reboot my phone it said their was no os on it i tried to fix it via odin and i cant remember exactly what happen but i got the emergency firmware blue that would allow me to do any but put it into download mode from the i flashed twrp back on to the phone now im trying to flash it back to stock firmare gain i really dont know what im doing in odin it say sboot.bin then fail when i go into twrp and try to flash custom rom it says so systlink not extracted or something like im all out of ideas i need some one to walk me thru step by step on how to get my phone back up and running
Click to expand...
Click to collapse
Did you ever do a back up if your system in twrp that you can restore in twrp? If not, do you know what your stock operating system is? When you flag in Odin the phone needs to be in download mode and you should have 4 files that you place in the different sections that are shown in Odin (the BL file goes in the BL section, AP goes in AP section, and etc.) In Odin you flash .tar files, not .bin files. Google the correct build for your phone and model and download the 4 files. For twrp, you need a flashable .zip that will work for your model or a version that you would put in a twrp backup file and restore from twrp.
Just Download You'r Firmware from the link and flash it with odin.
Dont use any .pit file
Link: https://www.sammobile.com/firmwares/galaxy-on5/SM-G550T1/TMK/download/G550T1UVU2AQC4/206346/