Related
if you are like me you already realized that running odin again to install, CF-Auto-Root-herolte-heroltexx-smg930f.zip won't do anything.
1) put SuperSu zip file somewhere on your phone (https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip)
2) you will need to reinstall twrp-3.0.2-1-herolte.img.tar via odin AP but don't auto reboot (https://dl.twrp.me/herolte/twrp-3.0.2-1-herolte.img.tar.html)
3) manual reboot and IMMEDIATELY go into recovery by holding down the magically combination. if you missed it then you will have to do step 2 again.
4) once in recovery install supersu zip from step 1 and you will get root back
should work for s7 edge (935) too but you will need to use the correct files
hope that help
nice thread, but can i flash a recovery via recovery?, because my usb port wont work :\
nwm found it!
i tried, but still cannot get root back.
derbysig said:
i tried, but still cannot get root back.
Click to expand...
Click to collapse
OP has missed one step.
You have to flash boot.img from official samsung firmware through TWRP(if you have TWRP installed) or you can install through odin. Make sure that your build number matches with firmware file. You have to do this before you are going to reinstall TWRP. After flashing boot.img file you will stuck in bootloop don't get panic. Flash supersu along with encryption disabled file attached in link. Then boot into android. You would definitely see supersu along with superuser script installed. No you have root access. Cheers
http://cloud.tapatalk.com/s/5745e40dd9c07/no-verity-opt-encrypt.zip
Sent from my SM-G930F using Tapatalk
gnan10 said:
OP has missed one step.
You have to flash boot.img from official samsung firmware through TWRP(if you have TWRP installed) or you can install through odin. Make sure that your build number matches with firmware file. You have to do this before you are going to reinstall TWRP. After flashing boot.img file you will stuck in bootloop don't get panic. Flash supersu along with encryption disabled file attached in link. Then boot into android. You would definitely see supersu along with superuser script installed. No you have root access. Cheers
Where do i find the original samsung stock boot img?
Click to expand...
Click to collapse
ALH20 said:
gnan10 said:
OP has missed one step.
You have to flash boot.img from official samsung firmware through TWRP(if you have TWRP installed) or you can install through odin. Make sure that your build number matches with firmware file. You have to do this before you are going to reinstall TWRP. After flashing boot.img file you will stuck in bootloop don't get panic. Flash supersu along with encryption disabled file attached in link. Then boot into android. You would definitely see supersu along with superuser script installed. No you have root access. Cheers
Where do i find the original samsung stock boot img?
Click to expand...
Click to collapse
Get from sammobile.com
U can download any samsung firmware from there. You will have to just search your device name to show the relevant builds. Makes sure that your build number (on your phone settings-->About-->build number ) is same as the file you are going to install
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
I tried to install Xposed but something went wrong and my P9 lite now continues bootlooping
how can i restore it?
from eRecovery it doesn't work...
eRecovery?
You need TWRP to install Xposed so... I assume you do have TWRP?
Then just restore your backup. I do hope you have a backup!
If not, make a wipe and flash a stock firmware. You can find links here in the forum.
Always make a backup of your working system when you flash stuff.
A bootloop from installing Xposed is not normal! I assume you have flashed a wrong version.
Keep in mind that it takes a long time for the first boot after installing Xposed so it might not even be a bootloop.
Schlengge said:
eRecovery?
You need TWRP to install Xposed so... I assume you do have TWRP?
Then just restore your backup. I do hope you have a backup!
If not, make a wipe and flash a stock firmware. You can find links here in the forum.
Always make a backup of your working system when you flash stuff.
A bootloop from installing Xposed is not normal! I assume you have flashed a wrong version.
Keep in mind that it takes a long time for the first boot after installing Xposed so it might not even be a bootloop.
Click to expand...
Click to collapse
can you link me the stock recovery? for VNS-L31
how i have to flash it now?
You can find links to the newest firmwares here:
http://forum.xda-developers.com/huawei-p9lite/development/stock-firmware-links-t3468245
The links provide you with a flashable zip file that can be flashed through TWRP.
Schlengge said:
You can find links to the newest firmwares here:
http://forum.xda-developers.com/huawei-p9lite/development/stock-firmware-links-t3468245
The links provide you with a flashable zip file that can be flashed through TWRP.
Click to expand...
Click to collapse
i can't access to twrp mode... can i install it via erecovery?
diorenzo said:
i can't access to twrp mode... can i install it via erecovery?
Click to expand...
Click to collapse
No. You need to find a way to install TWRP first.
But how did you flash Xposed when you don't have TWRP?
Or how did you lose TWRP access? I can't really see how you do not have TWRP...
i have twrp but sometimes it access to it and sometimes no
diorenzo said:
i have twrp but sometimes it access to it and sometimes no
Click to expand...
Click to collapse
download xposed uninstall, boot to twrp with power off+volume up when the device is shut down... and then flash the xposed uninstaller...i got that bootloop too and fixed it in 2 min
snapdesign said:
download xposed uninstall, boot to twrp with power off+volume up when the device is shut down... and then flash the xposed uninstaller...i got that bootloop too and fixed it in 2 min
Click to expand...
Click to collapse
i can't access to twrp mode, befor I could, now i don't know what to do
is there a method using adb?
diorenzo said:
i can't access to twrp mode, befor I could, now i don't know what to do
is there a method using adb?
Click to expand...
Click to collapse
you can do it with fastboot... flash the twrp img
i haven't access to my twrp
i haven't access to my twrp anymore
when it's shut down i pressed power off + v up + v down and iy says installing update but at 5% it stops
Try to reinstall TWRP using fastboot.
There are guides in here how to do that. I'm on mobile right now so can't really search the links.
But you installed TWRP before so just try to do it again but do it in fastboot mode. You should be able to still access this.
If you want to return to stock download a full firmware and extract it using huawei firmware extractor or similar. Then you can use fastboot to flash boot.img, cust.img, system.img and both of the recoveries. This only applies if you have the boot loader unlocked.
If it stops at 5% the oeminfo may not match the firmware you are trying to flash (at least it was my problem). You can also flash the correct oeminfo partition through fastboot (oeminfo files are available just search).
Edit: And I agree with what Schlengge as posted. You should still be able to flash twrp trough the fastboot mode.
Hello.
I'm stuck on here since 2 PM of yesterday and I can't figure out the mess I made.
So today I tryed on removing brand Vodafone (italian), and i did make it but i ended up with C900 and couldn't log with google, i tried installing oeminfos but i got the one from P9 (not lite) and it bricked my phone and it was stuck at booting sayng my datas were unable to load and suggests me a factory reset (lowleve) which the system made from itself.
Now I flashed the userdata and it worked, now the phone boot but Model number says hi625 and serial lacks of L31.. i mean it is VNS-C432B130..
Someone knows hot to help me?
i think its the same of balong version in p8 lite.
Thanks Everybody.
fiumef said:
Hello.
I'm stuck on here since 2 PM of yesterday and I can't figure out the mess I made.
So today I tryed on removing brand Vodafone (italian), and i did make it but i ended up with C900 and couldn't log with google, i tried installing oeminfos but i got the one from P9 (not lite) and it bricked my phone and it was stuck at booting sayng my datas were unable to load and suggests me a factory reset (lowleve) which the system made from itself.
Now I flashed the userdata and it worked, now the phone boot but Model number says hi625 and serial lacks of L31.. i mean it is VNS-C432B130..
Someone knows hot to help me?
i think its the same of balong version in p8 lite.
Thanks Everybody.
Click to expand...
Click to collapse
If you have unlocked the bootloader I would suggest flashing all the important images manually using fastboot (cust + cache + system + boot + recovery + recovery2). Also before rebooting flash the oeminfo (the C432 p9 lite one, either dual or single sim) file using fastboot (do NOT flash a zip file trough fastboot).
After doing this try to flash using erecovery combo (+ and - button combo) and do a factory reset. In my case that fixed it.
Edit: Since you want to debrand I would suggest using the VNS-L31C432B151 firmware.
flash the twrp img with fastboot, then sideload the xposed uninstall zip
Hi. My phone status:
PLK-L01
PLK-L01C432B180
EMUI version 3.1
5.0.2
rooted with TWRP boot recovery.
I'm looking for steps to update to android version 6.0.1 without losing all of my data, and keeping phone rooted and same recovery.
Is this something which is possible?
The only steps I have found is to how to replace stock recovery to update OTA.
I expect I would then need to root phone again afterwards.
Is this the recommended way of updating, or can I manually perform the update safely, and are there tried and tested instructions for this?
Many Thanks in advance for any responses.
M.
unroot before updating and flash stock recovery
hoodoo_mc said:
Hi. My phone status:
PLK-L01
PLK-L01C432B180
EMUI version 3.1
5.0.2
rooted with TWRP boot recovery.
I'm looking for steps to update to android version 6.0.1 without losing all of my data, and keeping phone rooted and same recovery.
Is this something which is possible?
The only steps I have found is to how to replace stock recovery to update OTA.
I expect I would then need to root phone again afterwards.
Is this the recommended way of updating, or can I manually perform the update safely, and are there tried and tested instructions for this?
Many Thanks in advance for any responses.
M.
Click to expand...
Click to collapse
Completely unroot from settings menu in SuperSU app, Download latest firmware that is B380, use Huawei update extractor to extract stock recovery from update.app which you will get by extracting firmware, flash it in bootloader mode.
Copy update.app to dload folder in SD card, turn off your phone. Press and hold power, Vol up, vol down until a reboot. Let go of power after booting but keep other two pressed for five, six sec more.
muradulislam said:
Completely unroot from settings menu in SuperSU app, Download latest firmware that is B380, use Huawei update extractor to extract stock recovery from update.app which you will get by extracting firmware, flash it in bootloader mode.
Copy update.app to dload folder in SD card, turn off your phone. Press and hold power, Vol up, vol down until a reboot. Let go of power after booting but keep other two pressed for five, six sec more.
Click to expand...
Click to collapse
Hi. Many thanks for the prompt response.
That all seems straight forward, I just have one step I'd like you to confirm, if you would, and an additional question:
"flash it in bootloader mode"
So, after unrooting the phone, I will still have TWRP recovery available to use?
And, once I am at latest 6 firmware, do I need to use something like SRK Tools to reroot, or will SuperSU app still be installed and able to perform the re-root?
Thanks,
M.
hoodoo_mc said:
Hi. Many thanks for the prompt response.
That all seems straight forward, I just have one step I'd like you to confirm, if you would, and an additional question:
"flash it in bootloader mode"
So, after unrooting the phone, I will still have TWRP recovery available to use?
And, once I am at latest 6 firmware, do I need to use something like SRK Tools to reroot, or will SuperSU app still be installed and able to perform the re-root?
Thanks,
M.
Click to expand...
Click to collapse
After the unroot, the twrp recovery will still be there. You need to replace it with stock recovery by flashing it in bootloader mode, only then you can upgrade.
After upgrading to 6.0 you need to flash twrp again (in bootloader mode) and then flash SuperSU 2.62 (in twrp, for a root). Don't flash any other version.
muradulislam said:
After the unroot, the twrp recovery will still be there. You need to replace it with stock recovery by flashing it in bootloader mode, only then you can upgrade.
After upgrading to 6.0 you need to flash twrp again (in bootloader mode) and then flash SuperSU 2.62 (in twrp, for a root). Don't flash any other version.
Click to expand...
Click to collapse
Many Thanks.
I think I know what I'm doing now.
(famous last words)
hoodoo_mc said:
Many Thanks.
I think I know what I'm doing now.
(famous last words)
Click to expand...
Click to collapse
Don't worry mate, we will all be here
muradulislam said:
Don't worry mate, we will all be here
Click to expand...
Click to collapse
Thanks for the support.
OK, I'm going to leave it for today, and try again tomorrow.
Basically, I go through the steps to flash the stock recovery but can't complete this first step ;
By the way, there are 2 files in the update.app - recovery.img and recovery2.img. Does it matter which one I use?
And does the header file need to be in the same location, or can that be ignored for this step?
Anyhoo, after flashing via command line, and then do the final 'fastboot reboot' the phone just goes into a continuous boot loop until I interrupt by holding down all of the buttons.
Am I doing something wrong here?
I seem to remember I had this same issue when I first got the phone and was trying to get TWRP recovery installed using this method, and can't for the life of me remember how I got through it
@hoodoo_mc
you have to use recovery.img for the system recovery partition! >>> fastboot flash recovery recovery.img
recovery2.img is for the e-recovery partition only!
the header files could be ignored!
But you should flash the boot.img also! >>> fastboot flash boot boot.img >>> because SuperSU has made some changes to your boot partition!!!
to be absolutely save, you should flash the system.img to prevent other problems at last! >>> fastboot flash system system.img
If you use the B380 file to update, you will not loose your data! But it could be clever to backup your personal data and your files with the HUAWEI Backup app!
Good Luck!
non-toxic said:
@hoodoo_mc
you have to use recovery.img for the system recovery partition! >>> fastboot flash recovery recovery.img
recovery2.img is for the e-recovery partition only!
the header files could be ignored!
But you should flash the boot.img also! >>> fastboot flash boot boot.img >>> because SuperSU has made some changes to your boot partition!!!
to be absolutely save, you should flash the system.img to prevent other problems at last! >>> fastboot flash system.img system
If you use the B380 file to update, you will not loose your data! But it could be clever to backup your personal data and your files with the HUAWEI Backup app!
Good Luck!
Click to expand...
Click to collapse
Thank you so much guys @non-toxic and @Mansehra
Using your help I successfully upgraded to B380 and have my phone rooted again with TWRP recovery, and no data lost.
Cheers,
M.
hoodoo_mc said:
Thank you so much guys @non-toxic and @Mansehra
Using your help I successfully upgraded to B380 and have my phone rooted again with TWRP recovery, and no data lost.
Cheers,
M.
Click to expand...
Click to collapse
Enjoy your phone buddy... Don't forget to get greenify and titanium backup.
I love these two apps.
;
muradulislam said:
Don't forget to get greenify and titanium backup.
Click to expand...
Click to collapse
where is it for if you can use TWRP and HUAWEI Update together??
BTW: Had compared greenify with Lollipop and MM and for me greenify makes no sense!
Power consumption was the same as without! (on my device = 6%/24h! -GSM2 -no WLAN -no GPS -noBT -no DATA sync)
non-toxic said:
;
where is it for if you can use TWRP and HUAWEI Update together??
BTW: Had compared greenify with Lollipop and MM and for me greenify makes no sense!
Power consumption was the same as without! (6%/24h!)
Click to expand...
Click to collapse
For me it does make sense as I don't want Facebook and similar apps to run in the background nagging me with updates. I want them to run and update myself when I have time and tap on them. For battery, it does save some juice for me.
What's the comment about TWRP and Huawei update.
I am not sure what you mean by it.
ah, ok i see... it is neccesarry for YOU!
BtT. and thx bro:good:
Hello,
today i wanted to update my *rooted* WAS-LX1 to B182, so i downloaded the update.zip and tried to flash it with FlashFire.
Then my phone booted in Error Mode. So i tried to boot in Fastboot mode, and it worked. So i flashed TWRP and now i want to install Stock firmware again, but i don't know which file i should flash. I've got 3 files called update.zip, update_data_full_public.zip and update_full_WASL21A_hw_eu.zip.
I hope you can help me.
Zillinda
Zillinda said:
Hello,
today i wanted to update my *rooted* WAS-LX1 to B182, so i downloaded the update.zip and tried to flash it with FlashFire.
Then my phone booted in Error Mode. So i tried to boot in Fastboot mode, and it worked. So i flashed TWRP and now i want to install Stock firmware again, but i don't know which file i should flash. I've got 3 files called update.zip, update_data_full_public.zip and update_full_WASL21A_hw_eu.zip.
I hope you can help me.
Zillinda
Click to expand...
Click to collapse
To update my rooted phone to B182 I had to download the full package (2.3gb, including update.zip and update_full_WASL21A_hw_eu.zip). I was not successfull in updating via TWRP. I updated via the official system menu so I don't know how exactly it was applied. According to other guides (http://www.stechguide.com/tag/was-lx1c432b182/ for example) it should be update.zip first and update_full_WASL21A_hw_eu.zip second, without a reboot. Let us know how it worked out...
garris_bibop said:
To update my rooted phone to B182 I had to download the full package (2.3gb, including update.zip and update_full_WASL21A_hw_eu.zip). I was not successfull in updating via TWRP. I updated via the official system menu so I don't know how exactly it was applied. According to other guides (http://www.stechguide.com/tag/was-lx1c432b182/ for example) it should be update.zip first and update_full_WASL21A_hw_eu.zip second, without a reboot. Let us know how it worked out...
Click to expand...
Click to collapse
Unfortunately it didn't work. The only thing i can do is boot in the TWRP recovery. Is there a way to flash the stock rom with fastboot?
Zillinda said:
Unfortunately it didn't work. The only thing i can do is boot in the TWRP recovery. Is there a way to flash the stock rom with fastboot?
Click to expand...
Click to collapse
I only tried flashing the update via sideload and recovery and it didn't work (http://rootmygalaxy.net/flash-ota-firmware-updates-using-adb-fastboot-commands/). Maybe you are lucky. Problem is, I'm quite new to this stuff, hopefully someone else can help out.
Can someone please provide us with a link for the stock recovery?
kazzot17 said:
Can someone please provide us with a link for the stock recovery?
Click to expand...
Click to collapse
https://mega.nz/#!V3AwUI6K!mcqlNCwcyE71MroUZuP9w-bNDhgt3MGzz0svgHUY8Ow
By the way, i solved the problem. I downloaded HuaweiUpdateExtractor for extracting the .img files from the update.app and i flashed them with fastboot.
Nice, congrats
This is the same version as here. I just added more langage xml files so now has 17 languages.
unzip file and flash in bootloader mode
Code:
fastboot flash recovery recovery.img
You can rename .img file as you want.
or use SPFlashTool.
Works on MYA-L02_L03_L11_L13_L22_L23_L41 models
Note: twrp-3.2.1 now available here
Credits:
@teamwin
@SGS3_0 (for original link)
Hello, I only load up the twrp menu but the touch screen does not work, I have a Huawei mya-l03. I hope you can fix it. Thanks to the programmers for taking their time.
Juan Centi said:
Hello, I only load up the twrp menu but the touch screen does not work, I have a Huawei mya-l03. I hope you can fix it. Thanks to the programmers for taking their time.
Click to expand...
Click to collapse
I am not developer of this twrp, but the mya-l03 has same kernel as mya-l11 so*it should work!
Just try re-installing twrp to see if it rectifies the issue.
Will I get the official OTA security updates after the root?
nicoX said:
Will I get the official OTA security updates after the root?
Click to expand...
Click to collapse
You will be notified but they will not install with twrp installed, afaik!
I received one recently but was unable to install it without reverting to stock recovery temporarily!
shanman-2 said:
You will be notified but they will not install with twrp installed, afaik!
I received one recently but was unable to install it without reverting to stock recovery temporarily!
Click to expand...
Click to collapse
Where can I download the stock recovery for Y6 2017 (MYA-L11) please?
seanbirkhead said:
Where can I download the stock recovery for Y6 2017 (MYA-L11) please?
Click to expand...
Click to collapse
You can get the full firmware here, get the SPflashtool here
shanman-2 said:
You can get the full firmware here, get the SPflashtool here
Click to expand...
Click to collapse
That's great thanks and thanks for the fast reply. Is there a simple guide anywhere for using spflashtool to flash the stock recovery or can it be done from command line (with adb etc.) ?
seanbirkhead said:
That's great thanks and thanks for the fast reply. Is there a simple guide anywhere for using spflashtool to flash the stock recovery or can it be done from command line (with adb etc.) ?
Click to expand...
Click to collapse
SPfashtool is fairly straight forward to use, you can always flash the stock recovery image from fastboot,
Code:
fastboot flash recovery recovery.img
Note: You will re-lock your bootloader flashing stock recovery!
TWRP for Huawei Nova Young MYA-L11
Hello, I'd like to know if this twrp is compatible with the Huawei Nova Young MYA-L11 and if i don't risk bricking my phone. Thank you
xtremegamer87 said:
Hello, I'd like to know if this twrp is compatible with the Huawei Nova Young MYA-L11 and if i don't risk bricking my phone. Thank you
Click to expand...
Click to collapse
Check the op.
your link not working give me another
Please