Related
I was sleepily clicking around last night and came across cuzz1369's AFH dump, containing Cyanogenmod13 builds for our G3 variants. Im psyched things are actively being worked on.
Heres the link..
because everyone will want to ask; flashing this, I cant boot past the optimizing dalvik screen (tried on another phone), maybe its the gapps, Im not sure. Flashing back 12 any 5.1 rom (or nandroid backup) went without a hitch.
I am not really a hardcore developer, and I hope I am not breaking any rules by sharing this information. If This post doesnt belong here please let me know, or MOD take care of it then let me know. Im just a long time lurker, getting excited, I hope this is the right place for discussion
cuzz1369 thank-you
:highfive:
I't works decent, sound wifi, data worked. But i couldn't use facebook, so a whole lot of FC.
Here is a build from the official cyanogenmod maintainer for the LG G3 (d855). He says the most is working but the camera and the gaaps at this time does not work. So it is an experimental Version.
Trendlink (german):
http://www.android-hilfe.de/index.php?posts/9323705
Downloadlink:
http://d855.finnq.de/CyanogenMod/
There are already newer builds with working camera.
So far I think I tried most things in the last two hours, and all is working
Oh this is a great news. :good::good::good::good::good:
S.AMU said:
There are already newer builds with working camera.
So far I think I tried most things in the last two hours, and all is working
Click to expand...
Click to collapse
Can you get facebook to work?
I don't know. I don't use Facebook )
But for now I reverted back to android 5, because in cm13 there are still some fc of system ui and other graphical problems and I need an reliable phone for work.
But I think I will put it again in an month or so
Hi Guys,
How to active Doze feature?
Tks
dungquoc said:
Hi Guys,
How to active Doze feature?
Tks
Click to expand...
Click to collapse
Doze activate itself automatically. You don't and can't do anything about it.
Sent from my LG-D855 using Tapatalk
ceza1380 said:
Doze activate itself automatically. You don't and can't do anything about it.
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Really?
And one question: Now on tab don't work on this unofficial CM ROM?
Tks
dungquoc said:
Really?
And one question: Now on tab don't work on this unofficial CM ROM?
Tks
Click to expand...
Click to collapse
Yes.
Most everything works on VS985 on the cuzz 11/9 build. Baseband is unknown, and you can't change the network type off of global, but data works fine. Messaging works but I didn't try to make a call to see if everything is good on that end. It's pretty good for a "test" build.
None of the varients are confirmed working for d851. Even his versions
Few devs commented on if on a thread I made
New batch of cm13 d851 boots!!!! no ls990 yet...
Did someone test this latest version already? I'm really curious...
Does the D851 even have a CM maintainer anymore? CM12 or 13?
Or do we just tag on to the D855?
Cuzz1369 said:
New batch of cm13 d851 boots!!!! no ls990 yet...
Click to expand...
Click to collapse
any changelogs with em sir? :angel:
There is a new LS990 build posted, downloading it now. Gonna give her a spin and see how it goes.
I got stuck at the Android is updating screen. It took about 5 minutes to get past the boot animation. I wiped Dalvic, cache, system and data. Then tried flashing the ROM only then 2 different sets of Gapps and still got stuck. Maybe I'll try again later when I have some more time.
Oh This CM13 build is work great with my D855.
Version of Android - 7.0
Kernel Version - 3.10.54
Firmware based on AOSP (real nougat)
bugs: No root
It does not work the mobile Internet
No radio
Does not work the video recording.
Video Decoding
Attention
1) After the first turn do not enter into your Google account to complete the configuration without it.
2) Go to "Settings> Applications> Google play services", set all the permissions.
3) Do the same thing-with the Play market application.
4) Open the market and go under your account, everything should work.
link - https://yadi.sk/d/cHeC3dG4w3jWp
ported from here: http://4pda.ru/forum/index.php?s=&showtopic=606941&view=findpost&p=53669133
thanks:
Qwanor
max127328
Chaiko Dima
Zormax
fx-mod
hvrj said:
Version of Android - 7.0
Kernel Version - 3.10.54
Firmware based on AOSP (real nougat)
bugs: No root
It does not work the mobile Internet
No radio
Does not work the video recording.
Video Decoding
Attention
1) After the first turn do not enter into your Google account to complete the configuration without it.
2) Go to "Settings> Applications> Google play services", set all the permissions.
3) Do the same thing-with the Play market application.
4) Open the market and go under your account, everything should work.
link - https://yadi.sk/d/cHeC3dG4w3jWp
ported from here: http://4pda.ru/forum/index.php?s=&showtopic=606941&view=findpost&p=53669133
thanks:
Qwanor
max127328
Chaiko Dima
Zormax
fx-mod
Click to expand...
Click to collapse
What you mean by phone Internet doesn't work. Is it WiFi or data that doesn't work.
Any news bout this rom
ilmentor said:
Any news bout this rom
Click to expand...
Click to collapse
There's a new update on 11/30 if you're still interested:
https://yadi.sk/d/KIy4x9-dzp3sY
What's new:
(translated)
*** 30.11.2016 [UpdatePatch v1.0] ***
Fixed video playback.
Accelerated connection to satellites.
Deleted radio, because it only caused problems), how to fix, Replace))
Added the browser.
Removed Launcher3.
Added Pixel launcher and Google wallpaper.
Click to expand...
Click to collapse
Source
Thanks will test it.
ilmentor said:
Thanks will test it.
Click to expand...
Click to collapse
Any stable android 7.0 rom u have tried ?
ffun735 said:
Any stable android 7.0 rom u have tried ?
Click to expand...
Click to collapse
I'm only aware of this one and a cm14 but both are far from stable. The most problem on both is data, it ain't working.
ilmentor said:
I'm only aware of this one and a cm14 but both are far from stable. The most problem on both is data, it ain't working.
Click to expand...
Click to collapse
I want to use it for few days to experience android 7. Should i go for it or wait for a stable build ? Also , i am on wiko , android 5 stock rom . My device is unrooted and without any twrp , so what to flash and any guide for that ??
ffun735 said:
I want to use it for few days to experience android 7. Should i go for it or wait for a stable build ? Also , i am on wiko , android 5 stock rom . My device is unrooted and without any twrp , so what to flash and any guide for that ??
Click to expand...
Click to collapse
I would advice you to wait a more stable build. You can't even make a call with this build. But if you still wanna test it give us more info bout your device. What wiko model.
ilmentor said:
I would advice you to wait a more stable build. You can't even make a call with this build. But if you still wanna test it give us more info bout your device. What wiko model.
Click to expand...
Click to collapse
Oh , then i would wait for a few days for the rom to become more stable . And i have Micromax Canvas a120 but i flashed the wiko rainbow official lp update using this app / rom -- http://forum.xda-developers.com/mic...cromax-a120-official-lollipop-update-t3245549
ffun735 said:
Oh , then i would wait for a few days for the rom to become more stable . And i have Canvas a120 but i flashed the wiko rainbow official lp update using this app / rom -- http://forum.xda-developers.com/mic...cromax-a120-official-lollipop-update-t3245549
Click to expand...
Click to collapse
Yeah you should wait but it's gonna take some time.
For the root and recovery of your phone they are explained in the topic you linked. Just use kingroot to root it and there is a recovery in the topic you linked.
I have try to root this rom wide kingoroot, root genius, unlock root and UPDATE-SuperSU-v2.76, but every time i try, the smartphone reboot and stay at boot loop, any sugestion? I have a wiko rainbow 4gb.
leandro-brandao96 said:
I have try to root this rom wide kingoroot, root genius, unlock root and UPDATE-SuperSU-v2.76, but every time i try, the smartphone reboot and stay at boot loop, any sugestion? I have a wiko rainbow 4gb.
Click to expand...
Click to collapse
There is no root for this rom yet. It is stated in the original thread.
Btw did mobile data work for you?
ilmentor said:
There is no root for this rom yet. It is stated in the original thread.
Btw did mobile data work for you?
Click to expand...
Click to collapse
Unfortunately no, but alredy have a fix for that?
And also, i can`t remove virtual keys, any sugestion?
leandro-brandao96 said:
Unfortunately no, but alredy have a fix for that?
And also, i can`t remove virtual keys, any sugestion?
Click to expand...
Click to collapse
Sorry have no idea. And if you have a fix for the mobile data plz share.
There is a cm14 for explay fresh too if you wanna try it.
ilmentor said:
Sorry have no idea. And if you have a fix for the mobile data plz share.
There is a cm14 for explay fresh too if you wanna try it.
Click to expand...
Click to collapse
Please, can you share the link? I`m more used to work wide cyanogen, and maybe i can fix some bugs of cm.
About the mobile data, i have try, but no fix yet.
leandro-brandao96 said:
Please, can you share the link? I`m more used to work wide cyanogen, and maybe i can fix some bugs of cm.
About the mobile data, i have try, but no fix yet.
Click to expand...
Click to collapse
http://forum.xda-developers.com/mic...ogenmod-14-nougat-alpha-explay-t3463738/page2
If you fix some bugs plz share. Specially the mobile data.
ilmentor said:
http://forum.xda-developers.com/mic...ogenmod-14-nougat-alpha-explay-t3463738/page2
If you fix some bugs plz share. Specially the mobile data.
Click to expand...
Click to collapse
Thanks man
CM14.1 nightly is available now for htc one m8 on CM official website
https://download.cyanogenmod.org/?device=m8
Does it mean that they are no longer working on CM13??
Which mean there is no snapshot version ??
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
i hope so ^^
Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
have you tried this cm14.1 nightly is it stable ?
Xhemal1325 said:
have you tried this cm14.1 nightly is it stable ?
Click to expand...
Click to collapse
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Saleen28 said:
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Click to expand...
Click to collapse
Is the same as unofficial, to be perfectly honest.
fizbanrapper said:
Is the same as unofficial, to be perfectly honest.
Click to expand...
Click to collapse
Nuh uh!!!
Its named OFFICIAL!
Previously it was written what doesn't work on the page.
Now nothing is enlisted.
So maybe it's stable.
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
skippydvd said:
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
Click to expand...
Click to collapse
Grab a log. It might help devs to fix this
Waza_Be said:
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Click to expand...
Click to collapse
Are you on GPE firmware? You can use terminal emulator and type:
Code:
su
df
This will tell you sizes of all partitions.
Ok, this was just an issue of CM recovery.
I installed TWRP and everything is fine
problems in cm14.1 htc m8
Hi guys I m having some problems
I have updated to cm 14.1 and it went to an bootloop. So i let battery drains completely then I after charging I wiped everything and then reboot. The phone rebooted and first thing I noticed is that there is no Google app. So i flashed gaps for 7.1 nano package which fixed this.
Now phone is working good though it's having some performance issues like slow keyboard (third party keyboards also), sometimes it heats and sometime it reboot by itself.
There is a major bug u have found
That I can't download messenger from play store it just keeps showing downloading but every other app is down loading fine. Then I went to browser to download some apks but I found that every downloading is failing due to unknown issues.
Then I installed Firefox chrome tried everything but no luck, but uc browser is showing that there is something wrong with SD card but there is no SD card, I have tried with SD card reboot reset everything still no luck. Then I connected it to my pc just to know that it's not even accepting anything from pc also.
It just keep showing copying moving but there is no progress. AND IT also not receiving anything from share it also. I can't even see my whatsapp contacts profiles pics they all are blank I can't download Nothing..
It's like my phone will download only through play Store and it will not accept anything from any other source like pc browser whatsapp hike messenger Facebook share it etc.
Theme store is also Missing.
But I am still able to use my phone as daily driver as it have no issues with sim card radio wifi Camera or anything else other than mentioned Above
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Xtenchen said:
.... comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Xtenchen said:
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
Here too! Omg you are the best ?
ckpv5 said:
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Click to expand...
Click to collapse
Can I ask you where did you go ? You was one of the best devs here. HTC 10 developing or ?
Moderator Information,
Thread has been closed as an official thread by an official maintainer has now been released.
edit: latest 14.1 base out with fixed camera and booting
edit: alpha6 is out, sensors fixed, but camera is completely broken
So I finally have a decent enough port of SFOS on bullhead
https://www.youtube.com/watch?v=OKWHeTUiU34
Thats an old video but a quick demo.
http://images.devaamo.fi/sfe/bullhead/
images can be retrieved from the above
Flash the latest stock image for your base and boot into it. for android 7 thats 7.1.2 (N2G48C, Aug 2017) and android 6 thats 6.0.1 (MTC20K)
Reboot to twrp
Format data
Reboot to twrp again
copy over the zips
flash cm or lineage from prefered base, but 14.1 is better.
Flash sfos zip
Working
Audio
Calls
Texts
Data
Wifi
Camera
Sensors
Not Working :~( :
Fingerprint scanner
Bluetooth
Click to expand...
Click to collapse
Issue with install apps from the app store or warehouse?
need to setup password in developer options
devel-su pkcon refresh
Click to expand...
Click to collapse
also since store is sometimes a bit meh, you can use
https://openrepos.net/content/basil/warehouse-sailfishos
best way to copy files onto device is through ssh, setup password in developer options
store is sometimes broken, you need to do devel-su pkcon refresh in terminal, need to set password up in developer options.
OTA - Over the Air update
Best way to update SailfishOS is by using an ssh connection to the phone.
Disable all patches and Openrepos repositories before updating.
Before updating use
Set desired release version, for example 2.2.0.29:
ssu release 2.2.0.29
Click to expand...
Click to collapse
Refresh the package cache:
devel-su pkcon refresh
Click to expand...
Click to collapse
Upgrade SailfishOS:
version --dup
Click to expand...
Click to collapse
Reboot the phone and enjoy the new release.
this wouldnt of been possible from the immense amount of help from the guys @freenode#sailfishos-porters
Really nice job! hope we can get all working in near future
Awesome cant wait to see stable build!
Sent from my Nexus 5X using Tapatalk
Can this be installed with multirom as secondary rom?
m4r0v3r said:
So I finally have a decent enough port of SFOS on bullhead
https://www.youtube.com/watch?v=OKWHeTUiU34
Thats an old video but a quick demo.
http://images.devaamo.fi/sfe/bullhead/
images can be retrieved from the above
Click to expand...
Click to collapse
Nice job, fingers crossed for getting other features to work!
btw. which vendor to use with it?
latest 6.0.1
fnldstntn said:
Can this be installed with multirom as secondary rom?
Click to expand...
Click to collapse
never tried it, didnt know we had a multirom stable.
on hammerhead it works fine as 2nd rom.
Holy crap this is awesome! I was waiting for a sailfish os port since I switched from my nexus 4. Is there a way for me (as an non-coder) to help you out somehow?
Oh and do you think it is possible that camera will work in the future or is this a missing driver code thing?
m4r0v3r said:
never tried it, didnt know we had a multirom stable.
on hammerhead it works fine as 2nd rom.
Click to expand...
Click to collapse
Yes there is a stable multurom on jolla kernel tread but in that case probably i will need to use the cm13 as primery rom to becouse of the vendor.
OMG a New Rom i don't know sailfish Os wow i go to try it
Thank you very much for your work
Really nice, sadly i need the camera for my work so i cant use as DD
Renaf2 said:
OMG a New Rom i don't know sailfish Os wow i go to try it
Thank you very much for your work
Click to expand...
Click to collapse
Not a rom, it is a completely different operating system so no android apps.
giantflash said:
Holy crap this is awesome! I was waiting for a sailfish os port since I switched from my nexus 4. Is there a way for me (as an non-coder) to help you out somehow?
Oh and do you think it is possible that camera will work in the future or is this a missing driver code thing?
Click to expand...
Click to collapse
the camera thing is a 32bit/64bit issue atm so i'll see were I get with it, am also messing around trying to get sfos working on a Huawei P9
No android apps at all, we have sfdroid, but its not working on cm13 as far as I know.
Very cool indeed, def hope this goes further. Remember it on N5 and was awesome
It's a nice ROM. But on my N5X the WiFi and Data isn't working.So sad.
justf0127 said:
It's a nice ROM. But on my N5X the WiFi and Data isn't working.So sad.
Click to expand...
Click to collapse
That was my fault, issue with PARANOID_ANDROID. New image thats been upped should fix the issue
Ah... So it seems that its source is based on cm13 built in 161222, then should I use December mm vendor or January mm vendor?
(Sorry for my bad English...)
Riskypedia said:
Ah... So it seems that its source is based on cm13 built in 161222, then should I use December mm vendor or January mm vendor?
(Sorry for my bad English...)
Click to expand...
Click to collapse
December probably.
And I know I'm bothering, but another question...
Is this rom doesn't contain boot animation? Cuz I saw cm13 booted well, but after flashing this over cm13 I can't see anything except google logo. Should I set my bootloader to the latest one?
6.0.1 (MTC20L) is what am using
hi, hope you are fine,
first thanks Astrako and all 7870 contributor for giving the best device tree for exynos7870 family also thanks for me because i build and adapte device tree vendor tree kernel source for M10 so first lets talk about the rom:
rom is tested it works fine:
+unchecked:
others..
+error/broken:
camera
mtp
adaptive brightness
(you tell me)
+common question:
-safety net works: (flash universal fix and use magisk 24.3)
-storage is decrypted so you can mount /data over custom roms
-64bit is supported
-cpu/gpu are now overclocked
-so smooth
this rom works with:
samsung galaxy M10 (SM-M105G/SM-M105F)
other you tell me
**note: update your bootloader/modem to android 9 or above (update to android 9 or above)
rom link: https://github.com/youssefnone/my_tools/releases/download/4078721333/crdroid-10-m10lte-01.zip
device tree: https://github.com/youssefnone/android_device_samsung_m10lte
vendor tree: https://github.com/youssefnone/android_vendor_samsung_m10lte
kernel source: https://github.com/youssefnone/android_kernel_samsung_exynos7870/tree/aosp
thanks
so i tested a lil bit and i found these(i will update):
-cant get contacts from sim card
-kill camera app needs root access but system doesnt have it(or im a dumbass)
-couldnt use "torch" or flashlight
-isnt as smooth as original, cant even use a stable web browser
-battery runs out fast but in extreme psm it returns to normal
-screen corners are somewhat bugged
-random stutters after some time(checked temp and its low)
-cant use sim app
-generally wrost performance
it is really great seeing something like this is being madde, please dont think that i didnt like it, these ara errors i encountered.
great work *thumbs up*
poorM10user said:
so i tested a lil bit and i found these(i will update):
-cant get contacts from sim card
-kill camera app needs root access but system doesnt have it(or im a dumbass)
-couldnt use "torch" or flashlight
-isnt as smooth as original, cant even use a stable web browser
-battery runs out fast but in extreme psm it returns to normal
-screen corners are somewhat bugged
-random stutters after some time(checked temp and its low)
-cant use sim app
-generally wrost performance
it is really great seeing something like this is being madde, please dont think that i didnt like it, these ara errors i encountered.
great work *thumbs up*
Click to expand...
Click to collapse
ok i will try to fix them but i need logs for web browser i suggest opera gx
youssef_none said:
ok i will try to fix them but i need logs for web browser i suggest opera gx
Click to expand...
Click to collapse
i first tried to use opera but it couldnt get pass the accepting ad settings, then i switched to firefox. and about log files sorry i uninstalled the rom without keeping anything.
poorM10user said:
so i tested a lil bit and i found these(i will update):
-cant get contacts from sim card
-kill camera app needs root access but system doesnt have it(or im a dumbass)
-couldnt use "torch" or flashlight
-isnt as smooth as original, cant even use a stable web browser
-battery runs out fast but in extreme psm it returns to normal
-screen corners are somewhat bugged
-random stutters after some time(checked temp and its low)
-cant use sim app
-generally wrost performance
it is really great seeing something like this is being madde, please dont think that i didnt like it, these ara errors i encountered.
great work *thumbs up*
Click to expand...
Click to collapse
can you pm in telegram
poorM10user said:
i first tried to use opera but it couldnt get pass the accepting ad settings, then i switched to firefox. and about log files sorry i uninstalled the rom without keeping anything.
Click to expand...
Click to collapse
ok no problem
poorM10user said:
i first tried to use opera but it couldnt get pass the accepting ad settings, then i switched to firefox. and about log files sorry i uninstalled the rom without keeping anything.
Click to expand...
Click to collapse
can you try this rom for m10, its carbon rom and tell me what happen thanks
https://sourceforge.net/projects/projectnone/files/CARBON-CR-8.0-PAX-UNOFFICIAL-m10lte-20230217-0921.zip/download
youssef_none said:
can you try this rom for m10, its carbon rom and tell me what happen thanks
https://sourceforge.net/projects/projectnone/files/CARBON-CR-8.0-PAX-UNOFFICIAL-m10lte-20230217-0921.zip/download
Click to expand...
Click to collapse
will try as soon as i can and give feedback
poorM10user said:
will try as soon as i can and give feedback
Click to expand...
Click to collapse
İt gives error 7 and also i decided to test crdroid with open gapps pico arm64 and its much smoother(last time used microg) but still has the same bugs
poorM10user said:
İt gives error 7 and also i decided to test crdroid with open gapps pico arm64 and its much smoother(last time used microg) but still has the same bugs
Click to expand...
Click to collapse
okay im going to build carbon android 11 if you want to test it (its now 99%)
poorM10user said:
İt gives error 7 and also i decided to test crdroid with open gapps pico arm64 and its much smoother(last time used microg) but still has the same bugs
Click to expand...
Click to collapse
this is carbon rom android 11
https://downloads.sourceforge.net/project/projectnone/CARBON-CR-9.0-R-UNOFFICIAL-m10lte-20230218-2203.zip?ts=gAAAAABj8VIb8rWzV8lQMz7g80ncskjecq_hVTbsuOj4z8XpZpj8khUTa3YvYzBZwqiRYdY8G2kNsara2QUmt5YAutj3Phh9VA%3D%3D&use_mirror=master&r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fprojectnone%2F
you test it and tell me what happen
youssef_none said:
this is carbon rom android 11
https://downloads.sourceforge.net/project/projectnone/CARBON-CR-9.0-R-UNOFFICIAL-m10lte-20230218-2203.zip?ts=gAAAAABj8VIb8rWzV8lQMz7g80ncskjecq_hVTbsuOj4z8XpZpj8khUTa3YvYzBZwqiRYdY8G2kNsara2QUmt5YAutj3Phh9VA%3D%3D&use_mirror=master&r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fprojectnone%2F
you test it and tell me what happen
Click to expand...
Click to collapse
gives error 1
poorM10user said:
gives error 1
Click to expand...
Click to collapse
which M10 product you have you have ?
poorM10user said:
gives error 1
Click to expand...
Click to collapse
these are supported: m10lte,m10ltedx,m10ltedd,m10ltexx
if you have on of these then check if zip is corrupted (notdownloaded correctly) and/or heck if ou wipe data/dalvik system vendor data (without internal storage)
youssef_none said:
these are supported: m10lte,m10ltedx,m10ltedd,m10ltexx
if you have on of these then check if zip is corrupted (notdownloaded correctly) and/or heck if ou wipe data/dalvik system vendor data (without internal storage)
Click to expand...
Click to collapse
i have m10lte m105f s4ctl2(android 10) and i wiped right ill check if it was corrupted
poorM10user said:
i have m10lte m105f s4ctl2(android 10) and i wiped right ill check if it was corrupted
Click to expand...
Click to collapse
ok
youssef_none said:
ok
Click to expand...
Click to collapse
nah i did every check and it still gives error 1
poorM10user said:
nah i did every check and it still gives error 1
Click to expand...
Click to collapse
yes its not uploaded correctly, its fixed in this update i think
https://downloads.sourceforge.net/project/projectnone/CARBON-CR-8.0-PAX-UNOFFICIAL-m10lte-20230219-0756.zip?ts=gAAAAABj8f05C7Bcvj4auMA6l7mrsIW2gdRF-toHBtzCXM33rSind3sGP84GD6V2rDcAc18K5qKnvz22oLaahBlV6QBQ3A88ew%3D%3D&use_mirror=master&r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fprojectnone%2F
youssef_none said:
yes its not uploaded correctly, its fixed in this update i think
https://downloads.sourceforge.net/project/projectnone/CARBON-CR-8.0-PAX-UNOFFICIAL-m10lte-20230219-0756.zip?ts=gAAAAABj8f05C7Bcvj4auMA6l7mrsIW2gdRF-toHBtzCXM33rSind3sGP84GD6V2rDcAc18K5qKnvz22oLaahBlV6QBQ3A88ew%3D%3D&use_mirror=master&r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fprojectnone%2F
Click to expand...
Click to collapse
still error 7
poorM10user said:
still error 7
Click to expand...
Click to collapse
which twrp version you use ?
youssef_none said:
which twrp version you use ?
Click to expand...
Click to collapse
twrp unofficial 3.6.2_9-0. i can use 3.3.0 but with 3.6.2 it does some operations flawlessly so i prefer it