Database Users

Thread closed

Install CM14 for OnePlus X (The Unofficial)
** How to Install TWRP for the 3.1.0 version you installed Oxygen.
B1: Starting Fastboot mode by turning off the power on. Then hold down + to the source.
Step 2: Install the driver and connect to the computer (HD drivers installed on the network to find it)
B3: Run cmd (run -> cmd) command fastboot boot attachments and enter this download Mod edit link removed
B4: boot into TWRP Self.
** The Stock 2.2.2 ROM you are using the network attempt to open up the OEM and then down Flashfy unbootloader install TWRP on CM ROMs directly or similar 13 and then into TWRP always offline.
** Note: Back up your data before doing us avoid errors arising restore offline.
** Download ROM CM 14: Mod edit link removed
** Link Download Grapps:Mod edit link removed
** Conducted into TWRP and wipe data, cache partitioning, Dalvik Cache. Flash ROM + Grapps and restart.
This is an experiment with me what errors arise not responsible. For those you love to dabble and discourage those you do not know and do not understand anything. People are already getting a bit bored Android does not dabble to dabble like new. : D
Path: Mod edit link removed
Vietnamses : Mod edit link removed

downloading, will report back soon.

Cam on
Thanks much

Post some screenshots.

failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too

Well, this is interesting.. The step-by-step guide is a bit confusing though. I will download and try the 'ol good method of flashing ROM, gapps and supersu. Hope it works!

namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app

be_are said:
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
here you go: https://drive.google.com/file/d/0B_Km0FbYnea1aDdIaTEydElhUkk/view?usp=sharing

twrp has not made it to 3 ox you have to use a downgrade to get a fresh start using unbrick method, (keep flashable backup via flashify) get twrp installed with the new (old) boot loader, flash cm14+ext. and you are done.
if you had cm13 or the likes, please confirm if you CAN upgrade to 14 before ox people start trying to install without knowing if it even has android 6 (last update i saw on the branch was from june 7 so idk)
teamwin does not have twrp for the ox 3 on oneplus x yet (on their releases anyway) so you have to follow some other process to downgrade to a twrp'able os (and a backup) before trying yo install this
if i see any info from people who have been able to update (and if it has android 7) i'll try to make a video on the process (in white, Texan english)

Please remove this page.

namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.

ksigit said:
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.
Click to expand...
Click to collapse
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

namquang93 said:
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
Click to expand...
Click to collapse
Looks like a successful install to me. Could you provide twrp logs?

With whose permission did you post this build here ? Don't you think there was a reason that even after a complete build of CM14 it was still not posted to the forums ?
I am asking you, as politely as possible, to remove the links and this fake procedure, when N is ready, it will be shared, you might find phony builds or legit but non working ones on the interweebz, that doesn't mean it gives you the right to share it just because you think its cool, because its not.
Take it down.
EDIT: Sure, if you build yourself and want to share it then you're more than welcome.

And then they will cry if things are broken !! Take it down folk !
Sent from my ONE E1003 using XDA-Developers mobile app

This Build was just a test build, what made u think that i will not post it here on xda if the rom booted? We, the team are working to make it work but yeah dont post the builds from afh here, will update u all for sure when its done. I think it was my mistake to not to make that build private. -_-

It flashes successfully but doesn't boot, goes back into recovery. Still, great work.

congrats for succesfull starter build
hats off !!!!! to you guys ([/B]developers off this rom) :good:

Flashed with/without gapps. Doesn't boot - goes back 2 recovery

foster095 said:
Flashed with/without gapps. Doesn't boot - goes back 2 recovery
Click to expand...
Click to collapse
Kindly refer to the developer's post, POST #16

Error 7

How can it be that all nightly and experimental downloads of the lineage Os side with me an error 7 error cause .... wars simply no operating system on the axon 7 .... open loader twrp 3.0.4-1

Error is often caused by the recovery. Just try an older version.
Sent with tapatalk from Axon 7

older?
was so happy that i have 1 useless wich version i have now 3.0.4-1. this is not working with flashing os from lineage hp? how can i downgrade that to an older?
is there any version wich works well?
or best a link maybe with an instruction?
i worked since 2 days at my phone and no os

I use TWRP 3.0.3-0 and this is the only one that works for me errorless. The xxx.img you can simply flash with TWRP. You will find it in axon xda forum.
Sent with tapatalk from Axon 7

marcus.linkenbach said:
I use TWRP 3.0.3-0 and this is the only one that works for me errorless. The xxx.img you can simply flash with TWRP. You will find it in axon xda forum.
Sent with tapatalk from Axon 7
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. You switch from zip to image
2. Select the TWRP image file and
3. Then select 'flash to recovery partition' and
swipe to confirm
4. Reboot to recovery and you go with the newly
flashed TWRP
Sent with tapatalk from Axon 7

error
Image flash started
image to flash:twrp.3.0.3-0
error opening/dev/block/sde14 (read only file sytem)
i didnt restart. got now the 3.0.3-0
i tryed to flash install zip lineage 14.1 21.2.2017 axon 7....
same error 7
assets failed , error installing zip Error 7
sry its my first phone maybe i don something wrong...

Ryper84 said:
Image flash started
image to flash:twrp.3.0.3-0
error opening/dev/block/sde14 (read only file sytem)
i didnt restart. got now the 3.0.3-0
i tryed to flash install zip lineage 14.1 21.2.2017 axon 7....
same error 7
assets failed , error installing zip Error 7
sry its my first phone maybe i don something wrong...
Click to expand...
Click to collapse
Are you on Nougat Bootstack? You get error 7 even when flashing experimental? You can try flashing the Unofficial LOS first.

nougat bootstack?
i did this link http://www.android-hilfe.de/thema/guide-a2017g-twrp-installieren-und-bootloader-entsperren.793464/
at the end of the instruction comes
You now have the Custom Recovery TWRP on your device and your boot loader is unlocked. Congratulation!
thats all i done. i installed supersu 2.79 too and now i am on the end with my knowlede :crying:
i loaded the experimental too. installed before 1 min error 7 too

Ryper84 said:
i did this link http://www.android-hilfe.de/thema/guide-a2017g-twrp-installieren-und-bootloader-entsperren.793464/
at the end of the instruction comes
You now have the Custom Recovery TWRP on your device and your boot loader is unlocked. Congratulation!
thats all i done. i installed supersu 2.79 too and now i am on the end with my knowlede :crying:
Click to expand...
Click to collapse
So you unlocked your bootloader when you were on A2017G stock Marshmellow right? You can go ahead and install LOS using instructions here:
https://forum.xda-developers.com/axon-7/development/unofficial-lineageos-14-1-zte-axon-7-t3545679
Start by installing the universal modem + bootloader zip in TWRP, then experimental, then if successful, latest nightly.

ashishv said:
So you unlocked your bootloader when you were on A2017G stock Marshmellow right? You can go ahead and install LOS using instructions here:
https://forum.xda-developers.com/axon-7/development/unofficial-lineageos-14-1-zte-axon-7-t3545679
Start by installing the universal modem + bootloader zip in TWRP, then experimental, then if successful, latest nightly.
Click to expand...
Click to collapse
A2017X_B15_Universal_Bootloader.zip this is download too for 2017g ?
now i am in 3.0.N1-1

Ryper84 said:
A2017X_B15_Universal_Bootloader.zip this is download too for 2017g ?
Click to expand...
Click to collapse
Yes, and A2017G modem too

!!
HERE WE GO. the german instruction was uncomplete for that installation i install...lokking what happen
u are my man ! line is running i download gapps at this moment many thx bro.
from my site this is closed
thread error 7 was problem that i didnt was in nougat loader

Ryper84 said:
HERE WE GO. the german instruction was uncomplete for that installation i install...lokking what happen
u are my man ! line is running i download gapps at this moment many thx bro.
from my site this is closed
thread error 7 was problem that i didnt was in nougat loader
Click to expand...
Click to collapse
Great

Hmm, I have the same problem. I flashed the N bootstack, and am unlocked, I am running twrp 3.0.4 and it keeps giving me the same error. Any other suggestions? Lol. I also tried unnofficial LOS builds

capeorigins said:
Hmm, I have the same problem. I flashed the N bootstack, and am unlocked, I am running twrp 3.0.4 and it keeps giving me the same error. Any other suggestions? Lol. I also tried unnofficial LOS builds
Click to expand...
Click to collapse
Did you ever figure this out?

Amer532 said:
Did you ever figure this out?
Click to expand...
Click to collapse
Go to Raysteff's download center for the G, get the TWRP 3.1.1-0 image and flash it through your old TWRP (Install --> install image) and you'll be good to go
It should work for the other versions since TWRP is the same for the 3 phones

Amer532 said:
Did you ever figure this out?
Click to expand...
Click to collapse
Choose an username... said:
Go to Raysteff's download center for the G, get the TWRP 3.1.1-0 image and flash it through your old TWRP (Install --> install image) and you'll be good to go
It should work for the other versions since TWRP is the same for the 3 phones
Click to expand...
Click to collapse
Like he said, the TWRP version changed everything. Hope it helps!

2017G, B04 soft bricked, I was smart and got TWRP without unlocking bootlocker (well, installation went wrong to be more specific). Hope 3.1.1 works...

ashishv said:
Great
Click to expand...
Click to collapse
I have same problem. I flashed the universal bootloader and nougat modem, but when i try flash lineageos i got error 7. I tried a lot of versions of twrp (3.0.0n.1, 3.0.2.2, 3.0.3.0, 3.2.1.0) and lineage zip (official 14.1, unofficial 14.1, unofficial 15) and combination of these but I did not succeed. Any idea?

TheXplodR said:
I have same problem. I flashed the universal bootloader and nougat modem, but when i try flash lineageos i got error 7. I tried a lot of versions of twrp (3.0.0n.1, 3.0.2.2, 3.0.3.0, 3.2.1.0) and lineage zip (official 14.1, unofficial 14.1, unofficial 15) and combination of these but I did not succeed. Any idea?
Click to expand...
Click to collapse
Use 3.2.1.0 and then what universal bootloader? Because if it is B32 it won't work. You need to install the bootstack on the lineage tthread.

[Recoveries]TWRP Recovery For Meizu M2 Mini

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM
Requirements
Root+Bootloader Unlocked
Flashing Instructions
After Unlocking Bootloader (If you dont know how to do it then go here)
[url]https://forum.xda-developers.com/meizu-m2-mini/how-to/guide-unlock-bootloaderinstall-twrp-t3390799[/URL]
Enter In fastboot.Then type.
"fastboot flash recovery recovery.img"
wait a minute turn off the phone. and enter recovery (Power + vol up until vibration)you'll Be in TWRP
Download Links
Old Recovery Version 2.8
[url]https://drive.google.com/open?id=0Bz6Fq2POoJTlMXd3YzJhTnUxeVU[/URL]
Mid Recovery 3.10 Latest
[url]https://drive.google.com/open?id=0Bz6Fq2POoJTlYnpCaXhSOUxjX0E[/URL]
New Recovery 3.1.1
[url]https://drive.google.com/file/d/0Bz6Fq2POoJTlRjh4ZkppWUJ4Qm8/view?usp=drivesdk[/URL]
Latest Recovery 3.2.1
[url]https://drive.google.com/file/d/1ftYtD2Tm0MdKBv_ZtVQHGJEcCuflb6Oe/view?usp=drivesdk[/URL]
Don't Forget To Press Thanks if you like it :good: :good:
Regards~
Murtaza Piplod

what's news bro?

ADIB27 said:
what's news bro?
Click to expand...
Click to collapse
updated with latest features of the latest recovery released by TWRP read changelogs at there TWRP site

heelo there,
my meizu m2 now keep rebooting and enter the twrp recovery.
even i hold the power button, it still cannot totally shutdown the phone.
any solution?
please help me.

maxisgsm said:
heelo there,
my meizu m2 now keep rebooting and enter the twrp recovery.
even i hold the power button, it still cannot totally shutdown the phone.
any solution?
please help me.
Click to expand...
Click to collapse
Try clear dalvik and cache.

adarshm4you said:
Try clear dalvik and cache.
Click to expand...
Click to collapse
the problem is after the phone reboot, it enter twrp menu, dan go to format menu then reboot again ......

maxisgsm said:
the problem is after the phone reboot, it enter twrp menu, dan go to format menu then reboot again ......
Click to expand...
Click to collapse
I think there will be some mess in installed os reflash it after taking a backup.

adarshm4you said:
I think there will be some mess in installed os reflash it after taking a backup.
Click to expand...
Click to collapse
my phone hang while i do a format storage.

maxisgsm said:
my phone hang while i do a format storage.
Click to expand...
Click to collapse
Go twrp recovery and do advance wipe and flash os then.Connect to pc and copy files to memory card and then.Flash it from there since your hang issue will not affect installing.It will solve all problems.Always keep backups before doing anything.

adarshm4you said:
Go twrp recovery and do advance wipe and flash os then.Connect to pc and copy files to memory card and then.Flash it from there since your hang issue will not affect installing.It will solve all problems.Always keep backups before doing anything.
Click to expand...
Click to collapse
every time the phone boot into twrp, it only go back to last state and keep fail then reboot...... it will cycle until battery die. i cannot go anywhere in twrp .....
now i at fastboot state, when i try to flash stock rom, it gave me the error
G:\adbFire>fastboot flash update update_8.zip
sending 'update' (1115283 KB)...
OKAY [ 88.153s]
writing 'update'...
FAILED (remote: partition table doesn't exist)
finished. total time: 88.237s

Your partition got messed by installing custom rom.This problem is uncommon.I cant find good solution for m2 in xda or any forums.Brother just bricked your phone.These cases occur when wrong kernal flash,flashing radio etc.I found this problem only in one plus.
Check these before doing anything in adb
Properly detects the device to avoid errors
Detect if bootloader is locked and temporary unlock it if that is the case.If it temporarly locked again,got to fastboot and unlock it as you know the process.
Try Perform this:
Flashing twrp recovery.img.If no error comes flashing custom or
Twrp is unable to create new partitions...Then
Fastboot boot recovery.img (of stock flyme)
fastboot flash recovery boot.img
Going to stock rom is only nice way i think so.
Boot.img can be found inside rom zip of flyme.Go for flyme first.
It isn't the best method to flash a different rom, but as the cmd implies its perfectly fine for flashing an update of the same rom.Since phone is prime important now.Go back custom then.
Some helpful links linkshttps://forum.xda-developers.com/meizu-m2-mini/how-to/install-stock-recovery-meizu-m2-mini-t3433916
Or wait for any heads to reply:silly:

adarshm4you said:
Your partition got messed by installing custom rom.This problem is uncommon.I cant find good solution for m2 in xda or any forums.Brother just bricked your phone.These cases occur when wrong kernal flash,flashing radio etc.I found this problem only in one plus.
Check these before doing anything in adb
Properly detects the device to avoid errors
Detect if bootloader is locked and temporary unlock it if that is the case.If it temporarly locked again,got to fastboot and unlock it as you know the process.
Try Perform this:
Flashing twrp recovery.img.If no error comes flashing custom or
Twrp is unable to create new partitions...Then
Fastboot boot recovery.img (of stock flyme)
fastboot flash recovery boot.img
Going to stock rom is only nice way i think so.
Boot.img can be found inside rom zip of flyme.Go for flyme first.
It isn't the best method to flash a different rom, but as the cmd implies its perfectly fine for flashing an update of the same rom.Since phone is prime important now.Go back custom then.
Some helpful links linkshttps://forum.xda-developers.com/meizu-m2-mini/how-to/install-stock-recovery-meizu-m2-mini-t3433916
Or wait for any heads to reply:silly:
Click to expand...
Click to collapse
adb cannot detect my devices ..... if i not mistake, last time i unlcock my OnePlus one without any problem, and adb can detect my phone,
now cannot detect ....

@murtaza1326
TWRP 3.2.1.0 is out!
Update the post

rushiranpise said:
@murtaza1326
TWRP 3.2.1.0 is out!
Update the post
Click to expand...
Click to collapse
post updated new latest 3.2.1 TWRP is added @Dinolek TWRP is alread there in his post so I don't think i should repost it here ??
Regards~

how to recovery install meizu m2 mini flyme 6.2.0.0g

thanks sir.. i wanna install this twrp

Pretty good!

[TOOL][OP5T] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the OnePlus 5T's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

Development starts, nice !

75markus said:
Development starts, nice !
Click to expand...
Click to collapse
Yes i have it ready from 2 days ago

is twrp available for the oneplus 5t

Hi, this tool compatible with OP5 or only for 5T? Thanks.

hypergamer1231 said:
is twrp available for the oneplus 5t
Click to expand...
Click to collapse
Yes there is available a beta twrp for op5t, i will update it when another better will come
neoalex13 said:
Hi, this tool compatible with OP5 or only for 5T? Thanks.
Click to expand...
Click to collapse
Both devices are supported

Where is Stock Recovery for OP5T?

I wanted to know to flash original firmware/update is it required to have original recovery or can it be done with twrp.
I can remember on the oneplus one twrp was sufficient for original firmware.

Normas Interruptor said:
Where is Stock Recovery for OP5T?
Click to expand...
Click to collapse
The stock recovery is not available at the moment, oneplus doesn't release it and noone have extracted it
adamo86 said:
I wanted to know to flash original firmware/update is it required to have original recovery or can it be done with twrp.
I can remember on the oneplus one twrp was sufficient for original firmware.
Click to expand...
Click to collapse
If you want you can manually flash stock oneplus rom with twrp or stock recovery, this tool flash stock rom through fastboot but the OnePlus 5T fastboot stock rom is not available for now

Can I just unlock bootloader and root and still update latest updates.
Also is anything broken when unlocking bootloader like certain features etc

adamo86 said:
Can I just unlock bootloader and root and still update latest updates.
Also is anything broken when unlocking bootloader like certain features etc
Click to expand...
Click to collapse
If you unlock the bootloader you will continue to get updates, but if you root the phone you will not get official update, you will flash full rom with twrp all times

Does the all-in-one tool kit work on a Mac?

redvw said:
Does the all-in-one tool kit work on a Mac?
Click to expand...
Click to collapse
No, it works only in windows

mauronofrio said:
If you unlock the bootloader you will continue to get updates, but if you root the phone you will not get official update, you will flash full rom with twrp all times
Click to expand...
Click to collapse
After unlocking bootloader the device would be erased. I wanted to know if the same applies if I flash twrp recovery. Thank you.
I'm planning to unlock bootloader load all my apps etc and then when stock recovery is available flash twrp.

adamo86 said:
After unlocking bootloader the device would be erased. I wanted to know if the same applies if I flash twrp recovery. Thank you.
I'm planning to unlock bootloader load all my apps etc and then when stock recovery is available flash twrp.
Click to expand...
Click to collapse
If you flash the twrp you should not re erase memory. If you want i can extract the stock recovery from your phone

mauronofrio said:
If you flash the twrp you should not re erase memory. If you want i can extract the stock recovery from your phone
Click to expand...
Click to collapse
I haven't received the device yet. How is it extracted?

adamo86 said:
I haven't received the device yet. How is it extracted?
Click to expand...
Click to collapse
Need an unlocked bootloader, then only boot (not flash) the twrp and extract the stock recovery image in the phone then upload it and it's all

mauronofrio said:
Need an unlocked bootloader, then only boot (not flash) the twrp and extract the stock recovery image in the phone then upload it and it's all
Click to expand...
Click to collapse
So I use twrp as boot to back up stock recovery is that correct.

adamo86 said:
So I use twrp as boot to back up stock recovery is that correct.
Click to expand...
Click to collapse
Is not a simple backup but a real copy, and yes something like that

mauronofrio said:
Is not a simple backup but a real copy, and yes something like that
Click to expand...
Click to collapse
Is there a step by step process which I can use.
Also I'm sure I saw stock firmware on another thread for 5t.
Can't the recovery be extracted from stock firmware.

[Red Wolf] Install TWRP and root your device without breaking incremental OTA's!

Red Wolf Recovery Project
Red Wolf Recovery is custom recovery based on the TWRP source code with it's own unique features. And one of these features is also support of the MIUI Incremental OTA's! However this thing is slightly more complicated then just downloading of the zip and flashing.. You have to first enable some things for this and flash some another ZIP file etc. So that's reason why i think that it would be nice to create a guide for this. Now let's look at it...
​
Pre-requisite
Redmi Note 3 - Snapdragon version!
Common sense
Steps
Download latest build of the recovery from here. And correctly follow the installation process.
After the correct installation reboot your device in to the recovery.
Now click on the "Advanced" and then on "Special Actions".
Here enable these checkboxes:
"Support MIUI Incremental OTA" and "Include System in OTA Survival".
Now clean/dirty flash some full MIUI ROM and flash whatever you want after that.
Now reboot your device in to the system.
When you get some update just download it using updater app and let it automatically reboot in to the RedWolf
Now everything is done! RedWolf will automatically install it and reboot back to the system!
After that you don't have to flash full ROM anymore.. Just always wait for the update from updater app and let it automatically reboot in to the RedWolf.
Now you can flash SuperSU or Magisk and incremental OTA's without any hustles. Use the built-in SuperSU/Magisk option for rooting your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Frequently Asked Questions
Q. I am getting Error 7 while flashing incremental OTA?
Ans: If you are really sure that you followed the installation process correctly then send us a log or screenshot and we will look at it.
Q. Can I install xposed, Viper, blah blah..?
Ans: Yes! You can install anything but make sure that you use this recovery for flashing the zip files.
Q.This recovery can be used in any ROM?
Ans: Yes! You can use this recovery in any ROM.

ATG Droid said:
Red Wolf Recovery Project
Red Wolf Recovery is custom recovery based on the TWRP source code with it's own unique features. And one of these features is also support of the MIUI Incremental OTA's! However this thing is slightly more complicated then just downloading of the zip and flashing.. You have to first enable some things for this and flash some another ZIP file etc. So that's reason why i think that it would be nice to create a guide for this. Now let's look at it...
​
Pre-requisite
Redmi Note 3 - Snapdragon version!
Common sense
Steps
Download latest build of the recovery from here. And correctly follow the installation process.
After the correct installation reboot your device in to the recovery.
Now click on the "Advanced" and then on "Special Actions".
Here enable these checkboxes:
"Support MIUI Incremental OTA" and "Include System in OTA Survival".
Now clean/dirty flash some full MIUI ROM and flash whatever you want after that.
Now reboot your device in to the system.
When you get some update just download it using updater app and let it automatically reboot in to the RedWolf
Now everything is done! RedWolf will automatically install it and reboot back to the system!
[SIZE="3! You can use this recovery in any ROM.
Click to expand...
Click to collapse
Its much better than ZCX since once zcx is replaced by official twrp then it requires full wipe so keep up the good job.

What is different from zcx twrp
Sent from my Redmi Note 3 using Tapatalk

Androbots said:
Its much better than ZCX since once zcx is replaced by official twrp then it requires full wipe so keep up the good job.
Click to expand...
Click to collapse
Can I flash this on 2gb ram variant?

lordsh said:
What is different from zcx twrp
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Look at the thread in the development section.. Here is the feature list. Anyway the main difference here is that RedWolf is based on the latest TWRP base and it also support AOSP 8.0.0 based ROMs
rohan_45 said:
Can I flash this on 2gb ram variant?
Click to expand...
Click to collapse
Yup

In ZCX the system img file (size more than 1 gb) is stored in sdcard. Do RedWolf also stores the system img file in sdcard ? (for incremental ota updates)

What if i edit build.prop...will i still be able to update incremental updates??

is that really ota update working on it??anyone tested??

umang0712 said:
What if i edit build.prop...will i still be able to update incremental updates??
Click to expand...
Click to collapse
Depends on what will you edit.

I can't save my custom settings, like reverse nav bar, system time etc. It is auto defaulted after every reboot. How can I save them?

Awesome recovery looks great, but I will downgrade to ZCX until the "bad app" checking is fixed.
Thanks.

M RN3 got bootloop . its not booting only mi logo showing what to do pls help fast as it is not my phone !! Its my fathers pls help guys. The device was running miui 8 marshmallow one. I did flashed correctly twrp also boot up but then I selected reboot to system from within twrp and it doesn't boot to system . What to do pls help. No offence to the twrp recovery developer but I need help pls ? Guys

kg hggggg tightly said:
M RN3 got bootloop . its not booting only mi logo showing what to do pls help fast as it is not my phone !! Its my fathers pls help guys. The device was running miui 8 marshmallow one. I did flashed correctly twrp also boot up but then I selected reboot to system from within twrp and it doesn't boot to system . What to do pls help. No offence to the twrp recovery developer but I need help pls ? Guys
Click to expand...
Click to collapse
Dude I got the same problem, download lazyflasher zip file ,flash it through twrp ,and reboot,it worked for me

dudemathai said:
Dude I got the same problem, download lazyflasher zip file ,flash it through twrp ,and reboot,it worked for me
Click to expand...
Click to collapse
Ya i understood so that means that if i want to flash custom rom will i need to flash lazyflasher whenever i flash a custom rom?

kg hggggg tightly said:
Ya i understood so that means that if i want to flash custom rom will i need to flash lazyflasher whenever i flash a custom rom?
Click to expand...
Click to collapse
I don't think you need to flash it when you change roms,what I know is that lazyflasher bypasses miui so that you won't be stuck in bootloop while you flash anything into miui

otyg said:
Awesome recovery looks great, but I will downgrade to ZCX until the "bad app" checking is fixed.
Thanks.
Click to expand...
Click to collapse
What problem are you facing? This recovery seems better and updated than ZCX.
Sent from my Redmi Note 3

can i use magisk with this?

rs168 said:
can i use magisk with this?
Click to expand...
Click to collapse
Yes

is this support with newest miui 9..?

xerocracker said:
is this support with newest miui 9..?
Click to expand...
Click to collapse
Yes
Sent from my Redmi Note 3 using XDA Labs