Related
Hi guys,
I know how rooting and flashing works but I've been using HTC devices since the nexus one so there are some differences I just want to make sure of. I got my 6P yesterday, I unlocked the bootloader and flashed TWRP. I wanted to gain root but Im not sure about flashing the modified boot img and the vendor thing.
My build was K but I got an OTA before unlocking the bootloader which updated to L. Anyway I don't know why I just formatted every thing in TWRP instead of the factory reset and I lost the OS X_X I tried to restore my nandroid with no luck. Anyway I got the factory img (MDB08L) from google dev and flashed used 'flash-all.bat' in the bootloader, the phone is running fine right now but I would like to update to the latest firmware 6.0.1+root since im not getting any OTA.
I would like to install CleanCore(6.0.1), the guide is
-> Flash Bootloader & Radio (as needed)
-> Flash CleanCore
-> Flash Modified Boot (named angler-xxxxxx-boot.zip)
-> Flash SuperSU or SuperSU Beta
-> Flash latest vendor.img (ROM & Vendor builds need to match!)
1. Should I use MMB29M factory img and flash 'flash-all.bat' like I did with the L build for the first step? then I flash new recovery?
-Flashing the rom through the recovery
2. so after I flash the rom I boot into the bootloader and flash the modified boot img with fastboot flash boot boot.img right?
3. then I go back to recovery and flash SU which I should download before.
4. vendor img is flashed in recovery too or fastboot?
Sorry for the hassle I just want to make sure.
One more thing, in this guide http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 at step 9, OP flashes the factroy img files separately (bootloader,radio,etc), is there a problem with using flashall.bat?
Thanks in advance and sorry for my noobish questions.
If you want to keep your data while doing this process, then yes, using the flash-all.bat is a problem. However, if you are fine with reverting back to stock(where you have to activate Android and reinstall all of your apps) then the flash-all.bat file is just fine.
That guide in the thread you linked walks you through how to update without losing data. After doing all of that, you'll just need to install TWRP and SuperSU again(do the latest systemless supersu though)
Enddo said:
If you want to keep your data while doing this process, then yes, using the flash-all.bat is a problem. However, if you are fine with reverting back to stock(where you have to activate Android and reinstall all of your apps) then the flash-all.bat file is just fine.
That guide in the thread you linked walks you through how to update without losing data. After doing all of that, you'll just need to install TWRP and SuperSU again(do the latest systemless supersu though)
Click to expand...
Click to collapse
Thanks for the help.
I have rooted my stock rom and gained root. I also installed exposed so i'll be fine without a custom rom for some time. There has been a report that some cameras aren't working on 6.0.1 with root so I'll wait for a while.
Thanks again
mr.dj26 said:
Thanks for the help.
I have rooted my stock rom and gained root. I also installed exposed so i'll be fine without a custom rom for some time. There has been a report that some cameras aren't working on 6.0.1 with root so I'll wait for a while.
Thanks again
Click to expand...
Click to collapse
I'm pretty sure those reports are because they used the SuperSU root method that didn't auto patch the boot image(which is the version(or two versions) behind the current version of SuperSU). This is happening because people are updating to 6.0.1, but the patched SuperSU boot image is for 6.0 and the 6.0 boot image conflicts with 6.0.1
As long as you use the latest version of SuperSU then you won't have any trouble with the camera
Enddo said:
I'm pretty sure those reports are because they used the SuperSU root method that didn't auto patch the boot image(which is the version(or two versions) behind the current version of SuperSU). This is happening because people are updating to 6.0.1, but the patched SuperSU boot image is for 6.0 and the 6.0 boot image conflicts with 6.0.1
As long as you use the latest version of SuperSU then you won't have any trouble with the camera
Click to expand...
Click to collapse
Thanks for the info
Guys today I came here with a simplified rooting method for titan running marshmallow 6.0 that doesn't need boot.img modification
Note -You need to have bootloader unlocked and custom recovery like twrp installed on your device before proceeding
Unlock bootloader here
Flash the custom recovery of your choice using auto flash script included in separate attachment
1) Download and rename recovery file as recovery.img and put into the folder of auto flash script.
2) Reboot your device into bootloader mode and connect to PC using USB cable [You shold have latest motorola device manager installed and your device should indicate usb connected on bootloader screen]
3) Now open 'auto flash recovery script' folder and run auto_flash_recovery.bat file
4) Now custom recovery is installed on your device
Steps for rooting-
1. Download BETA-SuperSU-v2.62-3-20151211162651.zip and place it in root of your internal sd card (other supersu version does not work on titan running official marshmallow)
2. flash BETA-SuperSU-v2.62-3-20151211162651.zip using twrp recovery
3. wipe delvick cache and cache (optional)
4. reboot device
5. If you want to use stable super su version i.e. UPDATE-SuperSU-v2.65-20151226141550.zip or any version like any supersu beta except BETA-SuperSU-v2.62-3. download and flash it over BETA-SuperSU-v2.62 after rooting.
6. If you have previously rooted your MM running device using SuperSu-v2.52 with modified boot.img, You need to flash stock boot.img first and reboot then follow this guide (step 1-5)
#BETA-SuperSU-v2.62 will do all required modification by its own script automatically.
Note- Dnt flash any other supersu version or SuperSU-v2.65 alone on unrooted device. you will get bootloop. Do a backup of your rom before any rooting operation.
In case if u stuck on bootloop flash this update UnSu script via twrp, wipe delvick and cache and reboot. this script will remove any supersu file installed in your device thus fully unrooting ur device that will recover you from bootloop
Thank you! It's working!
Perfect, It's working!
Working,great
Sent from my XT1068 using Tapatalk
Where can we get the stock boot.img for Marshmallow?
If u r running stock mm, then ur boot.img is also stock.
i think it's not necessary to root again if i already rooted with modified boot image does that make any difference
mandar91 said:
i think it's not necessary to root again if i already rooted with modified boot image does that make any difference
Click to expand...
Click to collapse
It is recommended to use stock boot.img
gauravrai said:
It is recommended to use stock boot.img
Click to expand...
Click to collapse
BUT currently i m on cm 13
Failed Root with XT1064 6.0
Everything ran smoothly installing the zip from TWRP, but on reboot: no SuperSU; no root. Now warnings or errors came up in the TWRP text during root.
MotoG 2014 XT1064
System: 24.41.34 titan_retuaws.retuaws.en.US retus
Kernel version 3.4.42-gef77327
TWRP-3.0.0-0-titan
Installed zip: BETA-SuperSU-v2.62-3-20151211162651.zip
Device is unlocked. Status Code 3
Update to 6.0 was with OTA after flashing the stock rom using XT1064_TITAN_RETUAWS_5.0.2_LXB22.99-24.12_cid9_CFC.xml.
The phone was previously 5.0.2 Rooted.
I did not lock the bootloader during the process.
The OTA to 6.0 went smoothly.
Followed the above instructions to the letter....
The only thing odd I did was uninstall the SuperSU App on the phone before flashing TWRP and starting this Root operation.
Has anyone gotten this to work on XT1064? Or any other root method on stock 6.0 and XT1064
fidorulz said:
Has anyone gotten this to work on XT1064? Or any other root method on stock 6.0 and XT1064
Click to expand...
Click to collapse
This will work on all Moto devices running stock marshmallow.
Root Moto G2 running on Official 6.0 Android Marshmallow Without (modified boot image)
https://youtu.be/9_9vkJvzWcU
Every time i remove system apps it boot loop any work around for this in marshmallow.. In lollipop removing system apps can normally booted up without any problem..
I successfully rooted my stock marshmallow on XT1068. I had softbricked it previously by using a newer version os SuperSu (I hadn't located this post yet, so I didn't recover from it with you script. I reflashed stock).
So, many many thanks.
In the end, my successful steps were
- flashboot flash recovery twrp-3.0.2-0-titan.img
- reboot into recovery
- install BETA-SuperSU-v2.62-3-20151211162651.zip from TWRP
- wipe dalvik & cache
- reboot device
wildingol said:
I successfully rooted my stock marshmallow on XT1068. I had softbricked it previously by using a newer version os SuperSu (I hadn't located this post yet, so I didn't recover from it with you script. I reflashed stock).
So, many many thanks.
In the end, my successful steps were
- flashboot flash recovery twrp-3.0.2-0-titan.img
- reboot into recovery
- install BETA-SuperSU-v2.62-3-20151211162651.zip from TWRP
- wipe dalvik & cache
- reboot device
Click to expand...
Click to collapse
Now over 2.62 supersu u can also flash any upgraded version like stable or any latest beta.
Sent from my XT1068 using XDA-Developers mobile app
Confirmed working on TWRP 3.0.0.1, stock Marshmallow 6.0 from OTA updates. Every other SuperSU got stuck on unlocked bootloader screen.
Thanks!
gauravrai said:
Guys today I came here with a simplified rooting method for titan running marshmallow 6.0 that doesn't need boot.img modification
Note -You need to have bootloader unlocked and custom recovery like twrp installed on your device before proceeding
Unlock bootloader here
Flash the custom recovery of your choice using auto flash script included in separate attachment
1) Download and rename recovery file as recovery.img and put into the folder of auto flash script.
2) Reboot your device into bootloader mode and connect to PC using USB cable [You shold have latest motorola device manager installed and your device should indicate usb connected on bootloader screen]
3) Now open 'auto flash recovery script' folder and run auto_flash_recovery.bat file
4) Now custom recovery is installed on your device
Steps for rooting-
1. Download BETA-SuperSU-v2.62-3-20151211162651.zip and place it in root of your internal sd card (other supersu version does not work on titan running official marshmallow)
2. flash BETA-SuperSU-v2.62-3-20151211162651.zip using twrp recovery
3. wipe delvick cache and cache (optional)
4. reboot device
5. If you want to use stable super su version i.e. UPDATE-SuperSU-v2.65-20151226141550.zip or any version like any supersu beta except BETA-SuperSU-v2.62-3. download and flash it over BETA-SuperSU-v2.62 after rooting.
6. If you have previously rooted your MM running device using SuperSu-v2.52 with modified boot.img, You need to flash stock boot.img first and reboot then follow this guide (step 1-5)
#BETA-SuperSU-v2.62 will do all required modification by its own script automatically.
Note- Dnt flash any other supersu version or SuperSU-v2.65 alone on unrooted device. you will get bootloop. Do a backup of your rom before any rooting operation.
In case if u stuck on bootloop flash this update UnSu script via twrp, wipe delvick and cache and reboot. this script will remove any supersu file installed in your device thus fully unrooting ur device that will recover you from bootloop
Click to expand...
Click to collapse
VIDEO TUTORIAL:-
https://www.youtube.com/watch?v=9_9vkJvzWcU
Work !
---------- Post added at 12:43 AM ---------- Previous post was at 12:42 AM ----------
Work thanks
i Tried this on Xt1072 Moto G 2nd Gen 2014 LTE and had to use the UnSu first as per the instructions and for the reasons described in red. I was also stuck in bootloader with that horrible message that says your bootloader is now unlocked! Now the issue is I seem to be stuck on the Motorola hand stitched by peter crawley boot screen? I saw someone aske dhow long this lasts? I had to use an OTG usb flash drive to get my files on to the damn phone for some strange reason phone and pc having massive communication issues, not playing very nicely with each other????? wtf? anyway I got okays and successful messages when in TWRP 2.8.5.0 I just dont understand why there seems to be such a huge problem with getting this f"£$%^&*g phone sorted.
Nexus 5 rooted and flashed with the beautiful elemental x kernel, why cant we get elementalx for moto g? its absolute genius! now someone tel me what the hell is going on here, when will I ever have success with this damn phone? I hate bloat and it only has 8GB plus the sd card which is configured as internal storage, could this be what the problem is?
Hi everyone,
After my A700YD upgrade to android 5.0.2, I cannot find a feasible solution to root my phone. I have tried the CF root or TWRP recovery of other A700 model but my phone stuck at samsung logo after reboot. Could anyone help me to root my A700YD? Many thanks.
dropbox.com/s/vfcms69qfn0vziq/BL_A700YDZSU1BOL4.tar.md5?dl=0
dropbox.com/s/phmabycaq9d5dm0/recovery.img?dl=0
Could anyone help? You can find the BL and recovery in the above links. New users cannot post link, sorry
Anyone can help?
Install twrp then use supersu v2.65
ashyx said:
Install twrp then use supersu v2.65
Click to expand...
Click to collapse
I have tried some twrp recovery. It can enter the recovery successfully but it cannot boot normally. It stuck at samsung logo.
ashyx said:
Install twrp then use supersu v2.65
Click to expand...
Click to collapse
I've tried to dig more in it, and what I get is
1. The only way I succeed is by using KingRoot, and the method it's using is by exploiting and keeping a daemon background and the su file for calling the daemon. So that means after reboot, root is lost.
3. Replacing KingRoot with SuperSU's su file will lead to a bootloop, same as goes to installing zip by twrp.
4. In the bootloop, logcat shows that it is repeating a particular normal boot process
5. In the bootloop, using adb shell and typing "su" will not get into root, despite su is located in xbin.
6. Busybox functions normally.
Any ideas?
ProtoAES256 said:
3. Replacing KingRoot with SuperSU's su file will lead to a bootloop, same as goes to installing zip by twrp.
Click to expand...
Click to collapse
Incorrect, installing supersu version 2.6x> with twrp will patch the boot image to prevent bootloop on samsung devices.
ashyx said:
Incorrect, installing supersu version 2.6x> with twrp will patch the boot image to prevent bootloop on samsung devices.
Click to expand...
Click to collapse
Whether or not the patch applies, it will still stuck in bootloop.
Same thing occured on current BETA supersu
ProtoAES256 said:
Whether or not the patch applies, it will still stuck in bootloop.
Same thing occured on current BETA supersu
Click to expand...
Click to collapse
Hi, I'm very interesting to this discussion, because yesterday my a700yd update to lollipop, then I root it with king root, but many app eg. leandroind not function with kingroot, so I use kingroot remove script but i'm occurred in bootloop, so I reflash original kitkat firmware but the phone does'nt work correctly, so I reflash lollipop firmware and all work perfectly. Now I would ask you if there is a functionally root method for a700yd?
Ps:when I do a wipe data in recovery mode, I have an error: E:can't mount /preload.
pianman said:
Hi, I'm very interesting to this discussion, because yesterday my a700yd update to lollipop, then I root it with king root, but many app eg. leandroind not function with kingroot, so I use kingroot remove script but i'm occurred in bootloop, so I reflash original kitkat firmware but the phone does'nt work correctly, so I reflash lollipop firmware and all work perfectly. Now I would ask you if there is a functionally root method for a700yd?
Ps:when I do a wipe data in recovery mode, I have an error: E:can't mount /preload.
Click to expand...
Click to collapse
From my current experience, no. The sad thing is I'm not skilled enough to do it myself, and seemly there is no reason that skilled devs are willing to have a head in to this not-quite-popular device.
Btw, you need to format /system partition before you flash the kitkat(well, maybe it works maybe it don't, it's just my experience.)
ProtoAES256 said:
Whether or not the patch applies, it will still stuck in bootloop.
Same thing occured on current BETA supersu
Click to expand...
Click to collapse
Nope, it will only do that if you attempt to replace Kingroot with supersu.
If you apply supersu to a clean stock boot and system partition it shouldn't boot loop.
---------- Post added at 10:16 AM ---------- Previous post was at 10:11 AM ----------
pianman said:
Hi, I'm very interesting to this discussion, because yesterday my a700yd update to lollipop, then I root it with king root, but many app eg. leandroind not function with kingroot, so I use kingroot remove script but i'm occurred in bootloop, so I reflash original kitkat firmware but the phone does'nt work correctly, so I reflash lollipop firmware and all work perfectly. Now I would ask you if there is a functionally root method for a700yd?
Ps:when I do a wipe data in recovery mode, I have an error: E:can't mount /preload.
Click to expand...
Click to collapse
If you have twrp installed I will upload a modified version of SuperSU which will allow systemless root on 5.0.2.
This will patch the boot image and should prevent a bootloop.
ashyx said:
Nope, it will only do that if you attempt to replace Kingroot with supersu.
If you apply supersu to a clean stock boot and system partition it shouldn't boot loop.
Click to expand...
Click to collapse
Weird, I did format my /system, /data and /cache before pushing in stock rom and supersu...
Isn't it sufficient to remove KingRoot?
Edit:
Or did I just messed up something?
ProtoAES256 said:
Weird, I did format my /system, /data and /cache before pushing in stock rom and supersu...
Isn't it sufficient to remove KingRoot?
Edit:
Or did I just messed up something?
Click to expand...
Click to collapse
If you flashed the stock rom that should remove the Kingroot and Super su binaries.
Are you using a stock kernel?
Usually only 5.1.1 and 6.0> need a patched boot.img as Samsung don't use root protection on 5.0.2 firmware.
However never say never and Samsung may may now be using root prevention in the later 5.0.2 kernels.
This means that a patched boot image is required to circumvent Samsung's root prevention.
If you have the boot.img I can patch it manually.
ashyx said:
If you flashed the stock rom that should remove the Kingroot and Super su binaries.
Are you using a stock kernel?
Usually only 5.1.1 and 6.0> need a patched boot.img as Samsung don't use root protection on 5.0.2 firmware.
However never say never and Samsung may may now be using root prevention in the later 5.0.2 kernels.
This means that a patched boot image is required to circumvent Samsung's root prevention.
If you have the boot.img I can patch it manually.
Click to expand...
Click to collapse
here you go, extracted from A700YDZSU1BOL4_A700YDZZT1BOL4_A700YDZSU1BOL4_HOME.tar
https://mega.nz/#!14IE3YoA!mRAhQSJCgZ53r5teACeJGWMwrftIY0g0GvZM0LMX9Kg
Hi everyone!
I found this two files, they are recovery.img and supersu 2.46. I still haven't tested them, because recovery is in img format and it has only the Chinese language. If anyone can help me translate the recovery and convert it in tar.md5 format. I found this 2 files on a700yd chinese forum. Thanks!
Same device platform. So should be compatible.
http://forum.xda-developers.com/samsung-a-series/general/recovery-twrp-galaxy-a7-t3153369
ashyx said:
Same device platform. So should be compatible.
http://forum.xda-developers.com/samsung-a-series/general/recovery-twrp-galaxy-a7-t3153369
Click to expand...
Click to collapse
I wiped my phone again and tried it
Here's my procedure
Wipe everything excluding external storage
reboot to bootloader and odin in stock rom
reboot to bootloader again and odin in twrp
reboot to recovery
twrp pops up patch notification(agrees and applied)
install SuperSU 2.65(stable) via sideload
reboot into system
Bootloop. ):
What does not cause bootloop
Stock ROM
TWRP installed only with stock ROM
What causes bootloop
installing SuperSU just after TWRP install (via zip or sideload)
Other problems
installing SuperSU from TWRP built-in will cause a recovery loop(unable to get past recovery screen)
=========
the recovery works good! (a good news at least)
ProtoAES256 said:
I wiped my phone again and tried it
Here's my procedure
Wipe everything excluding external storage
reboot to bootloader and odin in stock rom
reboot to bootloader again and odin in twrp
reboot to recovery
twrp pops up patch notification(agrees and applied)
install SuperSU 2.65(stable) via sideload
reboot into system
Bootloop. ):
What does not cause bootloop
Stock ROM
TWRP installed only with stock ROM
What causes bootloop
installing SuperSU just after TWRP install (via zip or sideload)
Other problems
installing SuperSU from TWRP built-in will cause a recovery loop(unable to get past recovery screen)
=========
the recovery works good! (a good news at least)
Click to expand...
Click to collapse
Try the supersu version above.
ashyx said:
Try the supersu version above.
Click to expand...
Click to collapse
i just update myphone to new firmware. i see something new eg : About device > "android security patch level"
i have same prolem (myphone boot stuck after flash superuser.zip v2.62-2.72 via twrp). And i try reflash one old boot.img via odin then myphone boot up normally with superuser.
i think the new boot.img make myphone stuck.
Can you please help me patch the new boot.img !?
ps: i'm so sorry for my bad english
https://drive.google.com/folderview?id=0B7uFmNBw-G1QalBCZERkeUpjd0U&usp=sharing
Hi Guys!
I ask you if someone used cf-auto root on this device and it was able to root the phone? Thanks.
hkopenh17071 said:
Hi everyone,
After my A700YD upgrade to android 5.0.2, I cannot find a feasible solution to root my phone. I have tried the CF root or TWRP recovery of other A700 model but my phone stuck at samsung logo after reboot. Could anyone help me to root my A700YD? Many thanks.
dropbox.com/s/vfcms69qfn0vziq/BL_A700YDZSU1BOL4.tar.md5?dl=0
dropbox.com/s/phmabycaq9d5dm0/recovery.img?dl=0
Could anyone help? You can find the BL and recovery in the above links. New users cannot post link, sorry
Click to expand...
Click to collapse
http://forum.xda-developers.com/samsung-a-series/development/galaxy-series-cf-auto-root-t3280406
Hello,
I tried to install the new Nougat rom for jiayu S3, but it was unsuccessful. Phone got soft bricked, but I recovered it with a twrp backup.
My OS is android 4.4.4, and TRWP is 2.8. After installing the new rom , an installation error appeared and phone did not work.
I wonder it it's due to twrp 2.8, but I can't install twrp 3 (S3_h560_TWRP_3.0.2-0). There was an installation error with flashify...
The question is: can I install 7.0 from 4.4? Is it an Android problem, a TWRP issue, or just my clumsiness?
Thank you!
achilipu05 said:
Hello,
I tried to install the new Nougat rom for jiayu S3, but it was unsuccessful. Phone got soft bricked, but I recovered it with a twrp backup.
My OS is android 4.4.4, and TRWP is 2.8. After installing the new rom , an installation error appeared and phone did not work.
I wonder it it's due to twrp 2.8, but I can't install twrp 3 (S3_h560_TWRP_3.0.2-0). There was an installation error with flashify...
The question is: can I install 7.0 from 4.4? Is it an Android problem, a TWRP issue, or just my clumsiness?
Thank you!
Click to expand...
Click to collapse
in short:
To go from 4.4.4 to Nougat you need to go via LP RC5 via flashify using firmware upgrade.
This is because the partition layout is different from KK to LP onwards.
Then you can flash Nougat using TWRP (which will be version 3)
Thank you very much for your answer.
Please forgive me for my ignorance but, which LP ROM should I download? Can I install it via flashify, via TWRP 2.8, o flash?
Thank you again!
You can not use Flashify, you have to do it using Flashtools (with a PC) to go from KK to LP. Download LP 5.1.1 RC 5 from MAD.
fusant said:
You can not use Flashify, you have to do it using Flashtools (with a PC) to go from KK to LP. Download LP 5.1.1 RC 5 from MAD.
Click to expand...
Click to collapse
thanks to correct me, I thought Flashtools was meant
Well, I'm in trouble now... I installed successfully 5.1 in my S3, but when updated twrp 2.8 to 3.0, it did not work, so I can't install Nougat...
Now I have no twrp, and no root. How can I root to install twrp? I can't install superSU neither....
I'm sorry if it has been already answered but I can't find it.
Thanks a lot
I re-installed LP with Flash tools and everything worked right. (In twrp , it says 2.8 version, instead of 3.0, though).
Now I installed Nougat, and everything is ok.
Thank you for your excellent job!
The problem is this:
I want to root my j500m with magisk via twrp but I would like to know if I can root with my version of android 5.1.1 if there is no problem, or I have to upgrade to 6.0.1 to do the process?
Another thing, that when I install the twrp on my device with android 5.1.1 loads everything well but at the time of powering it clears the operating system of the phone and does not turn on completely, it only stays in the samsung logo and I have to flash the rom of stock to solve it but the recovery returns to stock. The version of the recovery that was installed was 3.0.0-0. I would like to know if it is because I am doing it with android lollipop and I should do it in marshmallow or no matter what version of android you have. Thank you.
use this twrp.and first install Magik apk and flash lastest magisk. zip https://forum.xda-developers.com/galaxy-j5/development/recovery-recovery-pro-galaxy-j5-2015-t3728264
And there's no need to update to Android 6 for root
Thanks, but now I have another problem, I just wrote it in the last message of the forum, if you could help me.
Your twrp version is old 3.0.0.0
download this version 3.1.1.1 official
https://eu.dl.twrp.me/j5lte/twrp-3.1.1-1-j5lte.img.tar
and flash use odin.
Thanks friend, I have updated to marshmallow and I have installed the recovery 3.2.1-1 with aroma support, and I have rooted with magisk, now everything is fine.