Hello friends, i recently purchased VR box (first released) I'm pretty happy with it but i have little problem here, when i put my phone in vr box it starts pressing Volume down button again and again and my Volume bar is visible inside glasses which makes experience worst thing, is there anything i can do with it?, it's actually black thing i have to put phone in and then i have to put that thing in vr box but as i mentioned above it keeps pressing side Volume down button itself, any solution?
Related
i have two i9505 from vodafone, both white, both with a small problem. near the down volume button on the middle case the case is a little bumped like half a mm, u can notice it by looking at the volume buttons and see that the down vol button is a little more in the inside of the case that that up button, also u can notice that the display frame case is also not perfectly allined there.
do u guys have this problem or i am the only "poor" guy that has 2 with same flaw!?
I can only say mine doesn't have this issue.
This is my very first post, so I hope you can forgive me for any mistakes.
I buyed an secondhand ZUK Z1 from eBay. Everything was fine and dandy.
But after a week I encountered a problem. Firstly the Volume Down button did not respond properly then it utterly stopped working.
I buyed spare parts (side key) from the official ZUK-Store.
These are the contacts to connect with the "motherboard"(?)
I opened the the Z1 and even replaced the side key contacts myself.
After putting everything back together and powering on, the Volume Down Button still didn't work.
Volume Up button and Power-Button works perfectly but Volume Down does not...
I can press the Button normaly and hear the *click* noise.
I guess it's either a manufacturing error or some Software detecting error. Or something burned up inside. Well I don't know.
I can't access to recovery without the Volume Key. So yeah... i'm pretty frustated.
I'm typing this to find others with the same problem and would appreciate it when somebody knows more.
The device is not rooted
ROM: CyanogenOS 12.1-YOG4PAS60J
Phone struck
I too have the same volume down key problem. Because of that the phone enters boot menu and it becomes very difficult to come out of it till the phone shows some mercy on us. Once by chance if it works then the phone works absolutely normal. But it is a potential problem.
Hello Guys,
i just want to ask, if you have experienced the same problem as i. I don´t know if i´m only imagine it, but somehow the power button suddenly seems to be very easy to press, with no feedback when the Axon 7 is in my case (Spigen Rugged Armor). It feels like the button is light pressed in the case, so i just need to touch the power button on the case and the display gets on. Theres no "click" or a deep press anymore. Without the case everything seems to be normal. It happend today, i don´t know how or when, but suddenly when i grabbed the phone something felt wrong, and it was the power button.
Can someone share this experience?
I have the same case. Button (power + vol) feels the same between the 3 buttons. Of course it's going to feel different than without a case, but that's to be expected. There is definite resistance when pushing any button and a solid click when it's depressed.
Perhaps your case is defective? Exchange for another one.
Hello friends.
I have the following thing with my volume up button. If I run a finger along, it would flex and slightly click both on top and bottom portions of the button (no press action registered), like something is moving under it. No such thing with volume down button, it's solid. But both buttons work perfectly fine with adjusting volume.
I thought that was the problem, so I stopped at the T-Mobile store, where I bought my G6. Seller ended up opening two brand-new devices and they both had this issue, even worse than my original phone: when I was running my finger along volume buttons, they clicked like I was pressing them. But store display phones didn't have this problem.
I took my original phone back as of now. Do your phones buttons have similar clicking thing, if you run your finger along them? Is this an issue at all?
Otherwise, I like the phone, it's a good device. I can probably just put a case, that covers buttons, so that they don't flex.
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Luka keko said:
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Click to expand...
Click to collapse
Hello there, I'm from Brazil, as my english may not be the best lol... So I have same phone as you and similar problem... The problem is that volume down doesn't work. Other buttons work fine though. Also, the phone always enters in safe mode, so I assumed the volume down button is being pressed all the time. Except that, I realized that I could enter in download mode (I tested, if I don't press volume down in the combo 'power button + home + volume down' it won't get into download) and if I press volume down to cancel it will actually cancel and restart the phone. So the button is working... Here is the part where I think the problem is similar. There was a time I turned the phone off, through the system as we normally do, and then it wouldn't turn on again. I realized it was actually turning on, but the screen was black. I tried entering download mode and tested on odin and it actually had entered download mode, but the screen was black... Then after several attempts it finally got back on again... So I think there is something related with the button circuit with the lcd, I don't know. I would like to know if you got to any solution there. I guess that instead of bringing you any solution I'm bringing another problem lol. Well if I have any other information I will post it here. Best wishes.