Related
hey guys,
i think i made something really stupid.
-unlocked bootloader
-installed TWRP
-rooted
everthing was fine B161.
installed apps2sd and did something there so my phone was stuck in bootloop.
now the stupid part:
i wiped everything in TWRP... system, internal storage everything... i am such a douchebag!
I tried to recover with eRecovery and install stock firmware B161. Update process was successful and i can start my phone again.
but everytime i start the setup wizard i am stuck after wi-fi+ service (enhanced internet expierence) the screen shows "checking data.." for 1 second and switched back to wi-fi+ service.
is there anything i can do? guys help me please i am starting to freak out.
is my guarantee voided after i unlocked my phone?
fastboot shows
-phone locked
-frp locked
THANKS FOR ANY HELP!
khajiit said:
hey guys,
i think i made something really stupid.
-unlocked bootloader
-installed TWRP
-rooted
everthing was fine B161.
installed apps2sd and did something there so my phone was stuck in bootloop.
now the stupid part:
i wiped everything in TWRP... system, internal storage everything... i am such a douchebag!
I tried to recover with eRecovery and install stock firmware B161. Update process was successful and i can start my phone again.
but everytime i start the setup wizard i am stuck after wi-fi+ service (enhanced internet expierence) the screen shows "checking data.." for 1 second and switched back to wi-fi+ service.
is there anything i can do? guys help me please i am starting to freak out.
is my guarantee voided after i unlocked my phone?
fastboot shows
-phone locked
-frp locked
THANKS FOR ANY HELP!
Click to expand...
Click to collapse
did you do factory reset? I had some weird stuff going on after recovery, so I booted back to factory reset (vol + and power), after that it worked OK.
Once you requested the bootloader unlock key, your warranty might be void from that point (depends on country). The bootloader gets locked after flashing official firmware via eRecovery though.
yes i did a factory reset, still can't proceed after wi-fi+ configuration.
is there anything else i can do?
I have one question: is it possible with
-frp locked
and
-phone locked
to downgrade via eRecovery? (to b130 or something..)
I have the exact same problem.
I bought it 3 days ago, and suddenly yesterday downloaded Apps (from the Play Store) stopped working. So someone told me to hard reset it. I got into EMUI and did it. Then I rebooted it and now it stuck there. Can't complete the setup wizard.
I found no solution to my problem after reading google & xda-forum for 3 days. Tried everything... nothing worked. Sent it back and (luckily) got a new one. Now i'm more careful for sure.
The store I bought it from claimed that they had numerous similar complaints about the 3gb version. Which is the one I have. They told me I should take it back and that they will give me a new 2gb version along with any difference in money. We will see.
Exact same thing with me stuck at setup wizard so had to send it off for warranty and got a brand new phone yesterday
Sent from my HUAWEI VNS-L31 using XDA-Developers mobile app
Help please my Huawei P9 cannot proceed afta WiFi setting it is stuck on "Checking info "and Reply saying "Couldn't sign in"
The problem is Android System Webview, it's not a system app in this rom and when you reset your phone it deletes it, happened the same to me, I had to go to a huawei center, they menaged to skip the initial setup and I've installed the apk from apk mirror. Without this app the phone can't login in your google account, so if you don't install it your gapps won't work
Maxai94 said:
The problem is Android System Webview, it's not a system app in this rom and when you reset your phone it deletes it, happened the same to me, I had to go to a huawei center, they menaged to skip the initial setup and I've installed the apk from apk mirror. Without this app the phone can't login in your google account, so if you don't install it your gapps won't work
Click to expand...
Click to collapse
Hello,
does ist really work? Is it just installing the androidsystemview.apk and the phone works fine again?
huawei p9 lite bricked ...please i need a help
my phone stoped in fastboot...
phone locked
frp lock
i can´t enter on recovery mode and he not pass the huawei icon ...
please i need help
i do not connect phone to pc ....
contact me to solve the problem
I'm having exact problem with my mate 8 NXT-L09, after i had to factory reset when update from firmware finder failed. Anyway to bypass this problem? Do you have a way of add Android System View into the mate 8 during the bootup process. I love this mate 8 phone and 5 days now i has been torture.
logjam said:
I'm having exact problem with my mate 8 NXT-L09, after i had to factory reset when update from firmware finder failed. Anyway to bypass this problem? Do you have a way of add Android System View into the mate 8 during the bootup process. I love this mate 8 phone and 5 days now i has been torture.
Click to expand...
Click to collapse
Reflash the rom you were on using the "dload" method
dariomrk said:
Reflash the rom you were on using the "dload" method
Click to expand...
Click to collapse
Sorry, dont have the previous ROM, I boiught it off someone and they probably did the first update. The factory reset should reset to huawei original but i think this is where my problem sits.
HARDWARE VERSION=NEXT_L09_VN2
BOOTLOADER VERSION=NXT-C900B120_FASTBOOT
KERNEL VERSION=NXT-C900BB140_BOOT
AP VERSION=NXT-C900B140_SYSTEM
CP VERSION=21.750.08.00.010(balong)
Parameter Version:
P-00.00.000 G-17.V271.371 E-40.01.000
does anyone have an international rom for this or any version that can work.
The way i was able to factory reset was
1. going to huawei site. "consumerDOThuaweiDOTcomSLASHjmSLASHsupportSLASHdownloadsSLASHindexDOThtm"
change slash to / and dots to .
2. Select options for your phone, mine was NXT-L09. Will show "HUAWEI Mate 8 Firmware(NXT-L09, Android 6.0, EMUI 4.0, C605B100, Latin America, Channel-Others)"
3. Download, extract onto sdcard in dload folder, restart phone using vol up & vol down & power.
4. phone will complete boot restart but will then loop the boot process.
5. Do factory reset again
6. After huawei logo, different options show and you are then ok to proceed to login to your google account and setup refreshed phone.
Now on NXT-L09C900B100 build, if anyone has nougat rom for this, please share.
For future reference, if anyone gets stuck with this on P9 lite, indeed the instructions provided by Huawei point to VNS-L11C432B161, which doesn't include Android webview and therefore initial setup cannot proceed. The solution is to flash B210 on top of B161:
update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v80562/f1/full/update.zip
which allows you to pass setup as the bug has been fixed. No root/unlock/twrp required.
appreciate if anyone could suggest something.
my device is VNS-L52 and tried to unlock the bootloader(succeeded), tried to install TWRP(failed, no proper version). now i have a system update notification and did that update. but it failed to do update when the device got reboot as set, it went to the black screen as same as what i tried to TWRP. fortunately, i can still go to erecovery, when i tried to recovery, it said it couldnt get version info. does it mean i lost oeminfo? if so, could anyone share the model oeminfo for me? i searched offical rom a lot, but there is no any download for VNS-L52C719B120 or new version VNS-L52C719B160.
if my guess is wrong, could any one share your idea?
First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.
nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.
kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.
Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.
Hello,
I just applied the latest update C432B185 on a 8 pro honor; it remains blocked at restart. Another user reports an identical problem on the FRANDROID site.
Do not apply this update because the problem is blocking; you will no longer be able to use your honor 8 pro.
Solution on hold.
Thank you
I have the exact same problem. I started the update, and put it back in my pocket. I grabbed my phone after a few minutes and blindly touched the fingerprint sensor and pressed where normally the home button is. Instead, I catched a glimpse of a black screen, a triangle and a button. The button was at almost the same spot as where the home button normally is, so I clicked it and my phone restarted. After that, the only thing my phone does right now is show the white Honor logo with a lightblue blackground.
I already tried everything that can be done, I think.
Restarted the phone 20 times, did a 'user reset', cleared the cache 20 times and did a lot of factory resets (sometimes stuck at 99%).
Nothing made my phone work again. I also tried to use eRecovery to 'Download latest version and recovery' but that only resulted in 'Getting package info failed'.
If someone has any clue to what can be done to revive the Honor 8 Pro again (or to see some kind of logs to view what's going on), please... help! :crying:
The topic on Frandroid that Pascal was talking about: forum.frandroid.com/topic/261525-mise-%C3%A0-jour-qui-plante-le-smartphone
Hello,
I have exactly the same problem with my honor 8 pro.
I can't use it anymore, the user reset is staying 99%
If someone has a solution...
Also had the update, tried everything, wanted to flash other rom but i haven't got my product ID to unlock the bootloader.
Worst part of all, there is no care centre in The Netherlands...
so what im suppose to do? not sure at all, eRecovery fails,
using the dload method fails.
nothing seem to work atm...
Thank you for sharing this. It's not released in India yet seems but disabled the auto download update over wifi feature just in case.
Also, I can't connect to the phone with ADB or fastboot. /adb reboot recovery returns error: device unauthorized. This adb server's $ADB_VENDOR_KEYS is not set and ./fastboot getvar all returns FAILED (remote: Command not allowed). HiSuite (never tried before) can't find my phone on OSX and crashes after 5 minutes.
No root, no unlocked bootloader. Also shows FRP is locked.
Same here (france) Factory reset doesn't work, dload method doesn't either and the WIFI update doesn't find anything so I'm stuck with no phone for the moment :'(
Same here (Poland). Phone is bricked, second visit in service within 2 months :/
Oh ,god, i was about to let people know that a new update b185 had just come up until i see this post...I immediatly stopped the downloading process of this Update, so bad news for the ones who already applied the update and who got stuck now...
There might be an ultimate solution for bricked phone by using the DC Phoenix unlock software method...
Same Problem with the Honor 8Pro update
Hi,
Same problem in the Netherlands, Brabant.
Just downloaded the update for the Honor 8Pro.
Tried everything, also the eRecovery, Same problem with the package Failure.
Also E-mailed to HiHonor for an sollution, nothing so far.
Somebody got any tip? Can miss my phone for work..
Greeting from Oss, The Netherlands.
Same problem
Same problem here in The Netherlands. Literally nothing works. Never even rooted this device or anything like that. Also, what is this "download and recovery" in eRecovery even for if nothing downloads? I am very disappointed in this. Have no idea what I should be doing while normally I find a way to work around such problems.
TheVeeeMan said:
Same problem here in The Netherlands. Literally nothing works. Never even rooted this device or anything like that. Also, what is this "download and recovery" in eRecovery even for if nothing downloads? I am very disappointed in this. Have no idea what I should be doing while normally I find a way to work around such problems.
Click to expand...
Click to collapse
Zelfde probleem hier en nu een onbruikbare telefoon...
Nog geen half jaar oud!
Ik heb net Honor gemaild .. even afwachten tot morgen..
Sterkte alvast!
Thank you for the warning!
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
OldDroid said:
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
Click to expand...
Click to collapse
I have explicitly chosen to not root or otherwise mod my phone just yet. Does this void your warranty? Right now, I can send it back to the supplier and they will fix it. Of course if something else is faster (supplier says max. 3 weeks) then I am happy to try, if it does not void my warranty.
EDIT: and also, how can I see which version I need? I don't know how for sure which version I have, and of course I can't get into the UI anymore. As I posted before, ADB and Fastboot don't give me any info.
OldDroid said:
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
Click to expand...
Click to collapse
Hello,
that didn't work.
:crying:
Krystal666 said:
Oh ,god, i was about to let people know that a new update b185 had just come up until i see this post...I immediatly stopped the downloading process of this Update, so bad news for the ones who already applied the update and who got stuck now...
There might be an ultimate solution for bricked phone by using the DC Phoenix unlock software method...
Click to expand...
Click to collapse
Thank you.
I have made use of many Huawei phones in recent years (Mate 7, Mate 9, P8 Lite, P9 Lite) and Honor 8 Pro. I quickly realized that this update was blocking; it was common sense to inform users of the Honor 8 Pro in order to limit the number of service returns, unnecessary time wastage, etc.
This is our precious ...
Welcome
Here in Holland this morning the same problem.
Thanks for the Info. No update notice for my phone (in Germany). Hopefully Huawei/Honor will have stopped the update rolling out. Jeez, don't these updates get tested before they're released?
You can use Firmware Finder for PC to send an update for installation via erecovery with changing your routers DNS.
Erecovery is used in customer services to install manually sent updates only. That's why it can't find anything without sending an update to your device.
Hi to all
My name is Yarli and this is my first post on XDA-Dev.
I have a Huawei P9 Lite and I have a problem.
I did root on it following one of the 1.000 manuals on XDA. I unlock it contacting Huawei, and I downloaded like 4 or 5 different roms to test.
No one worked. Never. So even having a rooted cellphone I never could use it. I did the same with a Nexus 5 before, and I'm still doing it, actually. I like testing roms. But with this P9 Lite, no ways.
This was a second cell phone to play with so once I saw was impossible to put a damn Rom on it, I surrender. And kept it on a draw.
A few months ago I read Huawei was blocking the root access on its cell phones so I did the rollback and I installed a version of emui restored and downloaded from Huawei. Everything looks like working so I kept the cellphone clean: no google account, no apps, nothing. It looked ok. Youtube working fine, camera too, everything fine.
Last week. My girlfriend broke her cellphone. "Don't worry, I have one for you". So... I didn't. As soon as you try to set your google account the Play Store freezes and went back to the "insert account" screen.
I have a Huawei Attention Center close to my place. I took my cellphone there to check it like "Sorry, I put your software, officially downloaded from your website and my phone is no working right". And they say "You have to change the mother-****ing-board. 159€". For this price ¡I would buy another brand new cellphone!
So, the question:
What can I do?
Thanks for your collaboration.
Some info
Emui 4.1.1
VNS-L31C900B170
ANDROID 6.0
I dont know if this will help but, when I enter pressing the three buttons, on the emui recovery it says "Downloading package", bla bla bla,... and then "Software install failed" The update package does not exist, please dowload the package again" and I only can Reboot system now.
What the hell to do?
Thanks
yarlirut said:
I dont know if this will help but, when I enter pressing the three buttons, on the emui recovery it says "Downloading package", bla bla bla,... and then "Software install failed" The update package does not exist, please dowload the package again" and I only can Reboot system now.
What the hell to do?
Thanks
Click to expand...
Click to collapse
Hi Yarli,
i was wandering why you rollbacked, you could have chosen to do only unroot and
flash the stock recovery to keep having updates.
Maybe you misunderstood what happened on Huawei world.
They do not closed access to root, they closed access to website used
to request bootloader code.
During the rollback something is gone wrong and you have that firmware ( C900 ).
Maybe with a correct firmware you could solve that stucked situation.
Three buttons AKA dload is used to perform a forced update,
so you have to put a DLOAD folder in SD card with inside update.app
file extracted from FullOTA firmware.
Yep this could solve, i said could.
So if you choose to do what i'm posting here you assume all responsability
about you are doing with your device... it may simply not work or make things worse.
If you don't agree just ignore this post, if you want to try then answer my questions:
Have you already tried a factory reset ?
Wich region do you live ?
First of all: Thank you so much for your answer.
It seems I didn't get it right. At the end I wasn't using this p9 so much so I wasn't so deep on it. Now I see.
Let's see:
I have already try the factory reset, and the result is the same. The phone works, even if I put the sim card I can call and receive calls. But when I try to add my gmail account I can't. The systems gets out all the time. So no calendar, no mail, no fotos, no nothing related to my google account.
My region is Spain.
Again, thanks for your help
Dadditz said:
Hi Yarli,
i was wandering why you rollbacked, you could have chosen to do only unroot and
flash the stock recovery to keep having updates.
Maybe you misunderstood what happened on Huawei world.
They do not closed access to root, they closed access to website used
to request bootloader code.
During the rollback something is gone wrong and you have that firmware ( C900 ).
Maybe with a correct firmware you could solve that stucked situation.
Three buttons AKA dload is used to perform a forced update,
so you have to put a DLOAD folder in SD card with inside update.app
file extracted from FullOTA firmware.
Yep this could solve, i said could.
So if you choose to do what i'm posting here you assume all responsability
about you are doing with your device... it may simply not work or make things worse.
If you don't agree just ignore this post, if you want to try then answer my questions:
Have you already tried a factory reset ?
Wich region do you live ?
Click to expand...
Click to collapse
yarlirut said:
First of all: Thank you so much for your answer.
It seems I didn't get it right. At the end I wasn't using this p9 so much so I wasn't so deep on it. Now I see.
Let's see:
I have already try the factory reset, and the result is the same. The phone works, even if I put the sim card I can call and receive calls. But when I try to add my gmail account I can't. The systems gets out all the time. So no calendar, no mail, no fotos, no nothing related to my google account.
My region is Spain.
Again, thanks for your help
Click to expand...
Click to collapse
Hey, based on your firmware (B170) was expecting ASIA,
now i'm little confused because i can't find it for european versions.
Was your phone branded / unbranded one ? Do you remenber your last fully working firmware ?
VNS-L31CxxxBxxx ?