Info :
Greetings and Welcome. Here's the latest firmware update for Sony Z2(D6503) Build23.5.A.1.291_R4D with (Recovery + Root)
Enjoy!
How To Flash :
Method 1 Clean Flash :
1. Download Prerooted Rom + Bootloop Fix and place them on ur device storage,
2. Reboot to Recovery,
3. Do A Full Wipe Except the storage partition where u put Prerooted Rom + Bootloop Fix,
4. Flash Prerooted Rom and then Bootloop Fix
5. Reboot.
Method 2 Dirty Flash Over Previous Build Of Android MM :
1. Download Prerooted Rom + Bootloop Fix and place them on ur device storage,
2. Reboot to Recovery,
3. Flash Prerooted Rom and then Bootloop Fix,
4. Wipe Cache And Dalvik/Art
5. Reboot.
6. After Finishing booting process wait a few mins,
7. Now go to app drawer and check if supersu is there or not, If not then simply download it from google play store and install it and open it and select SU Binary install normal & Click Reboot,
8. Enjoy!
Stuff Used to Create This Pre-rooted Room :
D6503_Customized AU_1281-9715_23.5.A.1.291_R4D
PRFCreator_v1.3
UPDATE-SuperSU-v2.76-SYSTEMMODE
RecRootV4_combined
My Dell Laptop,
A Keyboard + Mouse,
My Experiences With This Build Of Android MM :
Now We can transfer apps to "EXTSDCARD" using "Transfer data to SD card"
STAMINA mode is back
Multi Tasking Is better than Previous Build Of Course XD
Significantly faster & smoother than previous build (23.5.A.0.575)
Screen Recording Error still exist
Anything Else? :good:
Download Links :
Rom : Click On ME
Bootloop Fix : Click On ME
Screenshots :
http://imgur.com/a/i7icA
Instead of Typing Thanks, You can simply press on it :good:, Try not to spam this thread, If u have any Question regarding my upload Ask here.
First Comment
Keep Up Bro (Y)
Thank you. ?
Thanks!
I'll try to build the same file but for Customized FR (my country) !
Why bootloop fix from 570 build need to flashed too ?
Sent from my D6503 using Tapatalk
itsnie said:
Why bootloop fix from 570 build need to flashed too ?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Because that's a life saver for Z2 with Prerooted rom. That's the only bootloop fix exist here on xda for now. Can you try flashing without it at see if it boots? And report back here! Unless u wanna waste some times on re-flashing LP rom and rooting it again to get back on a rooted mm rom
Will previous D6502 patches work?
RICdefeat & byeselinux
Have you used byeselinux & RICdefeat in the firm compilation??
Or only the bootloopfix?
Thank you
supercfc said:
Will previous D6502 patches work?
Click to expand...
Click to collapse
Can't say since I don't have a D6502 Model. Try and let me know if it works
LunaFree said:
Have you used byeselinux & RICdefeat in the firm compilation??
Or only the bootloopfix?
Thank you
Click to expand...
Click to collapse
"RecRootV4_combined" Include all of those stuff as well as recovery
@op
Will dummy_flashable.zip works as well making the ZIP? im on .575 with root and recovery. i have already downloaded the ftf before seeing this post
Thank you so much!!!!
So I finally made the same thing for the french firmware !
https://www.wetransfer.com/downloads/9d69b9f8a30da16970abc3f5655fa01720160804144653/d99f41
Dilesh Perera said:
@op
Will dummy_flashable.zip works as well making the ZIP? im on .575 with root and recovery. i have already downloaded the ftf before seeing this post
Click to expand...
Click to collapse
As I already said "RecRootV4_combined" Includes Root + Recovery. So u don't need anything else. Except Bootloop Fix
rakeshbro said:
"RecRootV4_combined" Include all of those stuff as well as recovery
Click to expand...
Click to collapse
I've do my compilation with 23.5.A.1.291 firmware using the ITALIAN customized and SUPERSU with PRF creator.
I've install busybox from appstore and DUAL recovery with the install.bat from pc and then in RECOVERY MODE i´ve flashed byeselinux+RICdefeat without bootloopfix, and works too!!
Thank you Rakeshbro!! :good::good:
LunaFree said:
I've do my compilation with 23.5.A.1.291 firmware using the ITALIAN customized and SUPERSU with PRF creator.
I've install busybox from appstore and DUAL recovery with the install.bat from pc and then in RECOVERY MODE i´ve flashed byeselinux+RICdefeat without bootloopfix, and works too!!
Thank you Rakeshbro!! :good::good:
Click to expand...
Click to collapse
Yeah I saw some feedback on "23.5.A.0.575" build as well that some ppl didn't flashed bootloop fix and they got it boot.
But for me I'd to flash bootloop fix to get into os. I remember Last time when I was on MM build "23.5.A.0.570_R4D" I've like 350+ apps installed on my z2 and after a few weeks later Build "23.5.A.0.575" came out. And guess what I've flashed it without the bootloops fix and that's it, I got stucked on lockscreen and whenever I unlock my device it just reboot again & again, And I can't even boot to recovery. With a broken heart I've to flash LP rom again and root it and then flash the latest MM build. I just did't want to take that risk again this time, since I've now more than 360+ apps installed on my Z2. So It's upto All of u guys. U want to flash the old bootloop fix or not. Try and let us know Good Luck!
Yeah you need bootloop fix. The same thing happened to me but I just pressed volume button during the bootloop, I entered TWRP, connected to USB, copied bootloop fix and flashed it without reinstalling everything
rakeshbro said:
Yeah I saw some feedback on "23.5.A.0.575" build as well that some ppl didn't flashed bootloop fix and they got it boot.
But for me I'd to flash bootloop fix to get into os. I remember Last time when I was on MM build "23.5.A.0.570_R4D" I've like 350+ apps installed on my z2 and after a few weeks later Build "23.5.A.0.575" came out. And guess what I've flashed it without the bootloops fix and that's it, I got stucked on lockscreen and whenever I unlock my device it just reboot again & again, And I can't even boot to recovery. With a broken heart I've to flash LP rom again and root it and then flash the latest MM build. I just did't want to take that risk again this time, since I've now more than 360+ apps installed on my Z2. So It's upto All of u guys. U want to flash the old bootloop fix or not. Try and let us know Good Luck!
Click to expand...
Click to collapse
I think we have do the same, but i dont use the bootloop fix...
I will flash recroot v4 next time without bootloop fix and i tell you. Thank you!!
Thanks for your work
flashing without a probleme
Related
Hi
Here are flashable zip file wich installs latest Sony stock 6.0.1 Marshmallow ROM 23.5.A.1.291_R3D (VMo AU-NZ), SuperSu v2.76 and latest TWRP 3.0.20 with read and write acces to system. Because device is Wi-Fi only region doesn´t matter. Only difference is bloatware. Since Sony hasn´t push update to SGP511 I use SGP512 firmware which is working fine on my device. If you want you can edit build.prop file in /system -folder to correct model number as shown in screenshot.
Here is the link for new 6.0.1 firmware:
https://mega.nz/#!VcxGyRZK!U4NqLOSeg1X_3KNC1_xXm2WnH4_i2OoZ6NwuyaIR6Hw
MD5 is: D3B78445485765AB7BD3A163F2A6C4BD
Make nandroid backup before flashing.
Install it by flashing whole zip file via custom recovery. TWRP recommend. If coming from .570 or .575 firmware dirty flash with art/dalvik cache wipe is okay.
If coming from older firmware factory reset is most likely necessary with cache and dalvik/art cache wipes but anyhow recommend. If you want you can restore your data with TWRP after installation and reboot. This install compatible busybox. If you install incompatible busybox you may loose acces to TWRP.
After flashing .zip file if you are getting bootloop you have atleast two choises.
- With pc and Flashtool use your firmware original ftf -file and flash it by excluding "FOTAKernel", "Partition" and "System". In other words in "exclude section" tick these and don´t wipe anything. (Credits @AlanDS)
- Or download "bootloop fix" from here: https://mega.nz/#!BUxFxSAR!bPVEEDnsPz962JQ1uA2PKJv9tYLKA47N0fhA80ltEvw
(Credits @niaboc79 and @machao44) and flash it with TWRP
Here is the old 23.1.A.1.28 (Customized NCB) FTF -file link:
For SGP511: https://mega.nz/#!sVIn1IJI!Ywqoksuej83vNkc__nNrBy-im6tfLjWr_mbonMd6PPk
MD5 is: aab7e5728dccb59d44d5ebe38c34c8da
This version of firmware should be rootable. For instructions and download go here: http://forum.xda-developers.com/crossdevice-dev/sony/root-how-to-root-5-0-lollipop-t3212108
Credits: @Androxyde @Chainfire @[NUT] @IaguCool @zxz0O0 @Wolfbreak @shoey63 @serajr @championswimmer @russel5
Any news on sgp512? or I can use this one? thanks in advance
Cocolopes said:
Any news on sgp512? or I can use this one? thanks in advance
Click to expand...
Click to collapse
At the moment latest for SGP512 is .726 firmware but you can use this one.
kulvertti said:
At the moment latest for SGP512 is .726 firmware but you can use this one.
Click to expand...
Click to collapse
good...I miss something if I use this? I think the only difference its the internal memory...
Cocolopes said:
good...I miss something if I use this? I think the only difference its the internal memory...
Click to expand...
Click to collapse
Nope. Only difference between devices is memory size and your device regognize correct size even if you use this. Only thing is your device shows as SGP511 but you can chance that in build.prop file if you like.
Er... on my Z2 Tablet with .726 firmware there is no "Ultra Stamina" mode... or am I missing something?
Or is "Ultra Stamina" introduced only with this new firmware version??
Thanks, I just noticed this version was offered as a 21 MB system update on my current ROM (23.1.A.0.690 NCB). But this is much better :good:
hasenbein1966 said:
Er... on my Z2 Tablet with .726 firmware there is no "Ultra Stamina" mode... or am I missing something?
Or is "Ultra Stamina" introduced only with this new firmware version??
Click to expand...
Click to collapse
You are right. Chancelog is copy/pasted from universal source so there is device specific differencies and because this device is wifi only there is no ultra stamina mode.
kulvertti said:
You are right. Chancelog is copy/pasted from universal source so there is device specific differencies and because this device is wifi only there is no ultra stamina mode.
Click to expand...
Click to collapse
hey man...if I flash this I will losse all my internal sd data? or I only need to backup my apps and nothing more? (sorry if I ask to much things)
Cocolopes said:
hey man...if I flash this I will losse all my internal sd data? or I only need to backup my apps and nothing more? (sorry if I ask to much things)
Click to expand...
Click to collapse
For to be safe I recommend to make nandroid backup including kernel, system and data. However if something go wrong system backup with kernel might be enough to bring your device back.
This ain't wipe your internal sd on it's own so it is your choice.
Thanks man, you're always so fast! We should be getting 5.1 next month I read somewhere
Tap to awake isnt working, is ghis a known bug?
BLiapis said:
Tap to awake isnt working, is ghis a known bug?
Click to expand...
Click to collapse
Nope. Double tap to wake work fine here.
Factory reset coming from KK, everything working perfectly, including root/SU and double tap to wake.
In case anyone has similar issues, I couldn't download from Mega directly to device (it kept disconnecting at around 10%), had to download using PC and transfer using SD card.
Thanks Kulvertti for all the work you do for our device, it is much appreciated! :good:
Hello !
I am already on Lollipop & rooted, does updating thanks to the Sony update center will keep my root or does this flashable zip is mandatory to keep root ?
Thanks
Angeal Hewley said:
Hello !
I am already on Lollipop & rooted, does updating thanks to the Sony update center will keep my root or does this flashable zip is mandatory to keep root ?
Thanks
Click to expand...
Click to collapse
This will keep your root. About OTA, maybe with small updates but haven't tested it with latest update.
kulvertti said:
This will keep your root. About OTA, maybe with small updates but haven't tested it with latest update.
Click to expand...
Click to collapse
Thanks for the reply!
I flashed your zip to be 100% sure to keep root
issue
hey man,
I just spent like 2 hours trying to get CWM installed for castor windy. finally ended up using a combo of ADB "fastboot reboot-bootloader" reboot-boot <lightning-bolt-symbol/fastboot mode/select kernal to flash> and put in an extracted boot.img for CWM (nightly build). i then did "fastboot reboot" and rapidly pressed the volume up button. it worked and im now in CWM. I put your zip on my sd card before, and I navigated to that <apply update/choose from sdcard1/flashablesomeupdatedetailsidontwanttocopy.zip> (strangly I noticed that there were 2 identical "choose from sdcard1" options)
cwm paused for a second, then outputted
Install failedFinding update package...
Opening update package...
E:footer is wrong
E:signature verification failed
Installation aborted
sorry about my formatting of what I did, Im new to xda devs
thanks in advance for the help, and thank you for supporting a tablet that very few people seem to use
joeyishar said:
hey man,
I just spent like 2 hours trying to get CWM installed for castor windy. finally ended up using a combo of ADB "fastboot reboot-bootloader" reboot-boot <lightning-bolt-symbol/fastboot mode/select kernal to flash> and put in an extracted boot.img for CWM (nightly build). i then did "fastboot reboot" and rapidly pressed the volume up button. it worked and im now in CWM. I put your zip on my sd card before, and I navigated to that <apply update/choose from sdcard1/flashablesomeupdatedetailsidontwanttocopy.zip> (strangly I noticed that there were 2 identical "choose from sdcard1" options)
cwm paused for a second, then outputted
Install failedFinding update package...
Opening update package...
E:footer is wrong
E:signature verification failed
Installation aborted
sorry about my formatting of what I did, Im new to xda devs
thanks in advance for the help, and thank you for supporting a tablet that very few people seem to use
Click to expand...
Click to collapse
Install Dualrecovery from here: http://forum.xda-developers.com/showthread.php?p=53661356 and use TWRP to flash .zip file.
kulvertti said:
Install Dualrecovery from here: http://forum.xda-developers.com/showthread.php?p=53661356 and use TWRP to flash .zip file.
Click to expand...
Click to collapse
First: Thanks to Kulvertti for all his work.
I am still confused. Do I need to root my device on forehand?
What I have understood so far:
You don't have to have root to flash NUT's [TABZ2][TWRP][PhilZ Touch][CWM] XZDualRecovery (It won't bring you root either).
So you can flash this recovery as long as you are on unrooted but rootable stock firmware (e.g. 17.1.2.A.0.314).
Then can flash this pre-rooted stock Lollipop ROM 23.1.A.1.28 and you will have root.
So only 3 steps to go from unrooted stock Lollipop to to this pre-rooted Lollipop?
1) flash rootable firmware (from PC, using flashtool).
2) flash "NUT's" recovery (from PC, using NUT's installer).
3) flash this pre-rooted stock Lollipop ROM (from sdcard1, using TWRP recovery)
Is this correct??
Hi Guys,
I have uploaded the latest Xperia Z1 firmwire (14.6.A.1.216). This is Customized India version of the firmware. Happy Flashing.
FTF: Stock Firmwire from Xperifirm
Google Drive:https://drive.google.com/file/d/0By3wU4_J-OtSc1AzX1VGVHBGaWM/view?usp=sharing
Mega Link:https://mega.nz/#!Zl5G2L7a!ApEVE_cnByb8d6mGrdkfHShuJG8fw-fJ0O_NCJQaLTc
PRE-Rooted Firmwire: Added, with Dual recovery and SuperSU V2.48. The Zip is signed
Google Drive:https://drive.google.com/file/d/0By3wU4_J-OtSTzZFNlBPanhBdTQ/view?usp=sharing
Mega Link:https://mega.nz/#!ZoI3kSZT!Ka2yNisE_vN2bcsTTNHxvkR5NzWQ--uuhTJcfnoA10M
credits:
Sony- obviously!!, for the awesome Xperia Z1 and this update
IaguCool -for Xperifirm
Androxyde & DoomLord-for Flashtool
zxz0O0-for PRF creator
Pre-Rooted Firmwire added!!
Google Drive links soon...
Procedure:
Full wipes
Flash preroot
Flash supersu
Flash xzdualrecovery
Or
Only wipes and flash prerooted zip
Enviado desde mi C6902 usando Tapatalk 2
@ismaelghr Only wipe and flash Pre-Rooted Firmwire
Is for c6903 to? Or is only to c6902?
Enviado do meu C6903 através de Tapatalk
@Botandroid Only C6902..
Good.
Needed help on flashing
hi. i am new to this flashing stuffs. i currently run on generic 4.4.2 rooted on my Z1. i am looking for Pre-rooted stock 14.6.A.1.216. can someone help me how to flash my mobile step-by-step?
Siddharth Mahendran said:
hi. i am new to this flashing stuffs. i currently run on generic 4.4.2 rooted on my Z1. i am looking for Pre-rooted stock 14.6.A.1.216. can someone help me how to flash my mobile step-by-step?
Click to expand...
Click to collapse
@Siddharth Mahendran You should have a Recovery installed on your phone before flashing a Pre-Rooted firmware...
Use Xperia [Nut]'s Dual recovery installer for Xperia Z1: http://nut.xperia-files.com/?ql=162303ad4b67ec4f7c00159b1de0e18807279c4a
If the Procedure hasn't changed(Becoz its been long since I used it), It should have .bat file or some kind of command line script. Have USB debugging and unknown sources enabled on your device. Connect your phone to ur PC and execute the bat file. It should search for the device and it will install the Dual Recovery.
Then, Copy the pre-rooted firmware that you downloaded from here into your phone. Reboot your phone, while booting the notification LED will light up, and then press Volume Down/Up button, based on the recovery you want. Then, wipe system, data, cache and dalvik cache using the option like wipe/format based on the recovery you are using. Then, Choose install->search for the Pre-rooted Firmware you copied,select it and Confirm installation. Once Completed, Reboot device.
Remember That, First boot will take a long time, be patient...
Backup all data before, trying anything on XDA!!!!
I am not responsible, if you do anything wrong or something went wrong in the Procedure!!!
Gladwin_Prince said:
@Siddharth Mahendran You should have a Recovery installed on your phone before flashing a Pre-Rooted firmware...
Use Xperia [Nut]'s Dual recovery installer for Xperia Z1: http://nut.xperia-files.com/?ql=162303ad4b67ec4f7c00159b1de0e18807279c4a
If the Procedure hasn't changed(Becoz its been long since I used it), It should have .bat file or some kind of command line script. Have USB debugging and unknown sources enabled on your device. Connect your phone to ur PC and execute the bat file. It should search for the device and it will install the Dual Recovery.
Then, Copy the pre-rooted firmware that you downloaded from here into your phone. Reboot your phone, while booting the notification LED will light up, and then press Volume Down/Up button, based on the recovery you want. Then, wipe system, data, cache and dalvik cache using the option like wipe/format based on the recovery you are using. Then, Choose install->search for the Pre-rooted Firmware you copied,select it and Confirm installation. Once Completed, Reboot device.
Remember That, First boot will take a long time, be patient...
Backup all data before, trying anything on XDA!!!!
I am not responsible, if you do anything wrong or something went wrong in the Procedure!!!
Click to expand...
Click to collapse
thanks. I will try this once the .zip file got downloaded
Gladwin_Prince said:
@Siddharth Mahendran You should have a Recovery installed on your phone before flashing a Pre-Rooted firmware...
Use Xperia [Nut]'s Dual recovery installer for Xperia Z1: http://nut.xperia-files.com/?ql=162303ad4b67ec4f7c00159b1de0e18807279c4a
If the Procedure hasn't changed(Becoz its been long since I used it), It should have .bat file or some kind of command line script. Have USB debugging and unknown sources enabled on your device. Connect your phone to ur PC and execute the bat file. It should search for the device and it will install the Dual Recovery.
Then, Copy the pre-rooted firmware that you downloaded from here into your phone. Reboot your phone, while booting the notification LED will light up, and then press Volume Down/Up button, based on the recovery you want. Then, wipe system, data, cache and dalvik cache using the option like wipe/format based on the recovery you are using. Then, Choose install->search for the Pre-rooted Firmware you copied,select it and Confirm installation. Once Completed, Reboot device.
Remember That, First boot will take a long time, be patient...
Backup all data before, trying anything on XDA!!!!
I am not responsible, if you do anything wrong or something went wrong in the Procedure!!!
Click to expand...
Click to collapse
@Gladwin_Prince Thanks bro. Changed to Android 5.1.1. I see no amazing features in lollipop.thats disappointing
gonna port needed apps
lol i softbrick my device!
I tried to flash stock ftf using flashtool but still no use!
restarts on booting! what to do now?
I mean which files i do include or exclude? and what to do when it ask to use fsc script found?
Nagesh_Noddy said:
lol i softbrick my device!
I tried to flash stock ftf using flashtool but still no use!
restarts on booting! what to do now?
I mean which files i do include or exclude? and what to do when it ask to use fsc script found?
Click to expand...
Click to collapse
Just use the latest Flashtool, it should solve all the problems with the fsc script... To recover your device from softbrick, don't exclude anything, make sure all wipes are checked and you are good to go. hope that helps.
Gladwin_Prince said:
Just use the latest Flashtool, it should solve all the problems with the fsc script... To recover your device from softbrick, don't exclude anything, make sure all wipes are checked and you are good to go. hope that helps.
Click to expand...
Click to collapse
I flashed .108 by flashtool with user-data.sin and exclude some items! rooted by rootkit! install nut recovery now again ready to flash pre-rooted .216!
tysm for firmware
Installed this and deodexed as well, xposed doesnt work. Any solutions?
Thanks.
timvonlee said:
Installed this and deodexed as well, xposed doesnt work. Any solutions?
Thanks.
Click to expand...
Click to collapse
Xposed works with .216 firmware. Running it myself.
Have you downloaded the correct 2 files for running xposed on lollipop?
motorazrv3 said:
Xposed works with .216 firmware. Running it myself.
Have you downloaded the correct 2 files for running xposed on lollipop?
Click to expand...
Click to collapse
Can you Give the link for correct xposed? i reverted back to 4.4.2 since xposed didnt work fo me
Siddharth Mahendran said:
Can you Give the link for correct xposed? i reverted back to 4.4.2 since xposed didnt work fo me
Click to expand...
Click to collapse
I think the system isn't getting mounted as rw, and since xposed installer writes to system, it is failing to install. Kindly tell me how to mount system as rw since even after deodexing it isn't getting mounted.
timvonlee said:
I think the system isn't getting mounted as rw, and since xposed installer writes to system, it is failing to install. Kindly tell me how to mount system as rw since even after deodexing it isn't getting mounted.
Click to expand...
Click to collapse
Sorry. idk about that.maybe senior members would help
Hi! can you update this with the the latest release 236?
Okay guys first let me tell you why I have created a new thread just for updating the BL and Firmware ,
I know we already have methods of updating like:
1. flashing the full OOS3 zip through stock recovery ,this method is quite simple for the ones who are on stock recovery and just want to update their OOS version.If you fall in this category then you have no purpose here,you may leave.
2. Is method provided by our fav helping hand @Joshwin Aranha ,that method is sure for the rest of us who dont fall in the above category,but is way too long,although simple and effective still "long".
I created this thread to help the CM13(Official or Sultan's)//any custom rom using new BL,users who want to update their BL without flashing the OOS through the tedious way just to update BL and users who are stuck on bootlogo due to old BL with roms using new BL.
Here I will guide you through the required steps to update our bootloader "In easiest and fastest way without wiping and restoring anything".
So what are we waiting for ,lets start .
Prerequisites
you will need two files for this process,nothing else.
1 . First one is BLUpdater zip --->Here.
2. Second is TWRP compiled from latest sources use either This or the one from Here<--use v41 or use Sultan's from Here OR if you are Martin's fan like me and want to use his MutiRom TWRP goHere.
PS:I am assuming you have Unlocked Bootloader and have either
official/blu_spark/sultan's/ Multirom TWRP installed,in a working condition on OOS2.x BL(if not what are you doing here).
Note: make sure oem unlocking is checked in developer options in your current rom,else updating the BL may cause it to get locked ,and you will have to unlock it again and flash the recovery manually through fastboot itself.
Now the steps
1.First copy both of the above files in your sdcard or otg or ext-sdcard,any place accessible in recovery.
2. Now boot into recovery Choose Install and choose the "OPXBLUpdateOOS3.1" zip and flash it.
3. Don't reboot now ,go to Install again ,this time use "Install Image" button in lower right corner,navigate to folder where you copied the new TWRP,you should be able to see the file,select it ,choose recovery in the next menu and flash.
NOTE:If you chose to use Sultan's recovery.zip then just flash it normally.
4. Don't reboot come back to TWRP home ,goto reboot and recovery ,if TWRP says no OS installed ignore it.
Now voila you should have updated your firmware/BL.Congrats.
You can now install any rom that supports the new BL.Older roms won't boot on the new MM BL.So check the rom thread before installing the rom and later on quacking here about your device being stuck at bootlogo.
Notes
i)Neither I nor XDA will be responsible if your OPX bricks or explodes or ditches you and flies to space.
ii)We are not touching system partition so last installed ROM will be intact.
iii)This guide will leave you into bootable rom only if you have a rom installed that works on latest firmware.
iv)This can also be used to restore all your OPX partitions back to OOS3.x partition state,if you messed any.
v)In case you are using latest nightly (cm13) and face bootloop - go Here
psst:If you are not diggin the new BL,and wanna downgrade again ,back to old BL,check this post.
PS: (second one,I know) This guide was made by taking inspiration from Joshwin's post and devtry method.
Also click Thanks if I helped you
matwaking said:
Okay guys first let me tell you why I have created a new thread just for updating the BL and Firmware ,
I know we already have methods of updating like:
1. flashing the full OOS3 zip through stock recovery ,this method is quite simple for the ons who are on stock recovery and just want to their OOS version.If you fall in this category then you have no purpose here,you may leave.
2. Is method provided by our fav helping hand @Joshwin Aranha ,that method is sure for the rest of us who dont fall in the above category,but is way too long,although simple and effective still "long".
So I created this thread just to shorten the process provided by Joshwin.I also created this thread to help the official CM13 users who have problem with latest nightlies due to new bootloader or are stuck in bootlogo.
...
PS: (second one,I know) This guide was made by taking inspiration from Joshwin's post and devtry method.
Also click Thanks if I helped you
Click to expand...
Click to collapse
Booomshkalaka!!!
Great guide, can't test (already have new bootloader and too lazy to switch back but look very good.
Thx to all
Kurt
Kurt Krummbein said:
Booomshkalaka!!!
Click to expand...
Click to collapse
Lol .
Thanks mate.
Will this work if I'm in bluspark twrp but the previous version..? Or do I have to change to official twrp?
jonrodz said:
Will this work if I'm in bluspark twrp but the previous version..? Or do I have to change to official twrp?
Click to expand...
Click to collapse
Will work with any twrp,no requirement of official one.
Thanks, bro. One more doubt. I'm currently on DU rom with custom kernel... Do you think rom will boot after this..?
jonrodz said:
Thanks, bro. One more doubt. I'm currently on DU rom with custom kernel... Do you think rom will boot after this..?
Click to expand...
Click to collapse
No it wont,right now almost all the custom roms need to update to support new firmware.Only latest cm13 nightlies are booting now,also aosp compiled by olddroid for new BL(shh its only for testers right now)
also maybe the MIUI8 port ,just posted in the forums.
I'm a litte bit confused.
Currently I'm on nighty October 1st. (cm-13.0-20161001-NIGHTLY-onyx.zip)
Can i update the Bootloader with your method and after that booting up my current nightly version?
Or do I have to update after the bootloader update to nightly version 12 (the currently latest)?
jerikooo said:
I'm a litte bit confused.
Currently I'm on nighty October 1st. (cm-13.0-20161001-NIGHTLY-onyx.zip)
Can i update the Bootloader with your method and after that booting up my current nightly version?
Or do I have to update after the bootloader update to nightly version 12 (the currently latest)?
Click to expand...
Click to collapse
no update the BL using the steps above ,then flash the latest nightly.That way it would be good.
Or you can flash nightly first then update BL.Choice is yours.I recommend updating the BL first.
I followed your guide with a locked bootloader, and now I'm in bootloops . Just suggest you put a big red "make sure your bootloader is unlocked" in the steps, not in the footnote.
Duplicate post.Deleted
ccaappton said:
I followed your guide with a locked bootloader, and now I'm in bootloops . Just suggest you put a big red "make sure your bootloader is unlocked" in the steps, not in the footnote.
Click to expand...
Click to collapse
Reboot into fastboot mode and
Code:
fastboot oem unlock
And using a custom recovery and custom rom makes me assume one have unlocked bootloader
matwaking said:
Reboot into fastboot mode and
Code:
fastboot oem unlock
And using a custom recovery and custom rom makes me assume one have unlocked bootloader
Click to expand...
Click to collapse
Thanks! I actually relocked my bootloader not long after installed cm13, and disabled "unlock oem" in "developer settings"(I don't know why I did this). So both system and rec is inaccessible, and fastboot is useless in this case. Fortunately I followed the unbrick guide: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 and get the old bootloader back. Now I could enter CM13-09-28 with all my data intact.
Just hope to let people know the hard lesson I learned, and how to deal the bootloops.
And guys, NEVER RELOCK BOOTLOADER AGAIN!
ccaappton said:
Thanks! I actually relocked my bootloader not long after installed cm13, and disabled "unlock oem" in "developer settings"(I don't know why I did this). So both system and rec is inaccessible, and fastboot is useless in this case. Fortunately I followed the unbrick guide: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 and get the old bootloader back. Now I could enter CM13-09-28 with all my data intact.
Just hope to let people know the hard lesson I learned, and how to deal the bootloops.
And guys, NEVER RELOCK BOOTLOADER AGAIN!
Click to expand...
Click to collapse
Well no fix without any problems hehehe,.Haapy 4 u.
Click that button if you think my posts are useful
Is this enough to install CM14 or do i have to install the whole room and them flash CM14?
Manelit said:
Is this enough to install CM14 or do i have to install the whole room and them flash CM14?
Click to expand...
Click to collapse
taking you wanna flash ashwins cm14 right. You just wanna follow the instructions in first post and then flash the cm14.No need to install the whole Oos zip.
This way you should have updated BL and working cm14.
Just flash the cm14 after booting into new TWRP
I've just followed the procedure from OP and all went smooth as butter. Thanks
Directly after that (without reboot) I've installed the latest CM13 (with GApps) and Arsenic R24. Working as a charm
slaav said:
I've just followed the procedure from OP and all went smooth as butter. Thanks
Directly after that (without reboot) I've installed the latest CM13 (with GApps) and Arsenic R24. Working as a charm
Click to expand...
Click to collapse
Press that sweet sweet button mate
1.First copy both of the above files in your sdcard or otg or ext-sdcard,any place accessible in recovery.
2. Now boot into recovery Choose Install and choose the "OPXBLUpdateOOS3.1" zip and flash it.
3. Don't reboot now ,go to Install again ,this time use "Install Image" button in lower right corner,navigate to folder where you copied the new TWRP,you should be able to see the file,select it ,choose recovery in the next menu and flash.
4. Don't reboot come back to TWRP home ,goto reboot and recovery ,if TWRP says no OS installed ignore it.
Click to expand...
Click to collapse
Hi, everyone
I'm accidentally reboot device after second step. Now device freezing on "+1 powered by android". Can I remove this zip, or... what can I do next?)
walsash said:
Hi, everyone
I'm accidentally reboot device after second step. Now device freezing on "+1 powered by android". Can I remove this zip, or... what can I do next?)
Click to expand...
Click to collapse
u can flash bluespark twrp via fasboot
Sent from my ONE E1003 using XDA-Developers mobile app
Hi guys. This is my first post on XDA.
Now I've got C9 Pro, and hours ago I just got it flashed with the latest Android 8.0.0 ROM, version: C9000ZHU1CRG9.
Also I managed to flash TWRP. Then I started doing the Root things with TWRP, as I had done on Android 7.1.1.
However, I did get issue while doing the Root on Android 8.0 --
Actually the SuperSU was flashed successfully, but after this, the phone kept restarting, failing to enter the OS.
I am definitely sure I did the Root with the right steps.
Also I tried different versions of SuperSU, still the issue existed.
Then I flashed Magisk instead, no use.
I even used other versions of TWRP, still no use!
......
Finally, I quitted, flashing the former Android 7.1.1 ROM.
I can't use a phone without Root, but I really want to experience Android 8.0.0.
Can someone offer me any solution?
Thanks a lot in advance!
there is a new twrp for oreo try it . it may fix your problem
---------- Post added at 12:58 AM ---------- Previous post was at 12:56 AM ----------
Thanks to @travis82
Try this
https://forum.xda-developers.com/showpost.php?p=77344461&postcount=131
aboyazan78 said:
there is a new twrp for oreo try it . it may fix your problem
---------- Post added at 12:58 AM ---------- Previous post was at 12:56 AM ----------
Thanks to @travis82
Try this
https://forum.xda-developers.com/showpost.php?p=77344461&postcount=131
Click to expand...
Click to collapse
I already tried the TWRP you introduced, no use, the issue still exists.
try the latest 3.2.3 and tell if it worked
I suggest to flash a clean oreo via odin then flash the latest twrp from @travis82 then do format data and wipe cache and data from twrp recovery
then install the latest magisk
hope u the best @jasonc417
keep updated
hatib237 said:
try the latest 3.2.3 and tell if it worked
Click to expand...
Click to collapse
You know what, I already tried TWRP 3.2.3, but failed!:crying:
I have tried almost every combination ended up getting bootloop always except when I tried these;
1. Install stock firmware and csc (not home csc this will fully wipe the phone)
2. After finishing it enters to recovery and updates the system. Keep hold of pressing the volume down+home key to enter to download mode as soon as it finishes installing system update.
3. install twrp from here https://www.androidfilehost.com/?fid=1322778262903985796 (original thread https://forum.xda-developers.com/c9-pro/development/twrp-c9ltechn-t3646970 sometimes links can be dead. In that case you can find new link from that thread).
4. Keep holding of pressing Volume Up+Home key while installing twrp to boot into recovery as soon as the phone reboots.
5. While in recovery flash this SuperSU https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012 (Located in this thread https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012 as "*** Xperia users, and others experiencing bootloops ***
Please use this version instead: "
Your phone should boot normally to setup screen.
After You finish setup you should see supersu icon and your phone should be rooted.
I haven't tested but if your phone is in working condition right now you can try from step 3 to not lose your data.
Good Luck -
Thanks for your method. I think I made it finally!
[email protected] said:
I have tried almost every combination ended up getting bootloop always except when I tried these;
1. Install stock firmware and csc (not home csc this will fully wipe the phone)
2. After finishing it enters to recovery and updates the system. Keep hold of pressing the volume down+home key to enter to download mode as soon as it finishes installing system update.
3. install twrp from here https://www.androidfilehost.com/?fid=1322778262903985796 (original thread https://forum.xda-developers.com/c9-pro/development/twrp-c9ltechn-t3646970 sometimes links can be dead. In that case you can find new link from that thread).
4. Keep holding of pressing Volume Up+Home key while installing twrp to boot into recovery as soon as the phone reboots.
5. While in recovery flash this SuperSU https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012 (Located in this thread https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012 as "*** Xperia users, and others experiencing bootloops ***
Please use this version instead: "
Your phone should boot normally to setup screen.
After You finish setup you should see supersu icon and your phone should be rooted.
I haven't tested but if your phone is in working condition right now you can try from step 3 to not lose your data.
Good Luck -
Click to expand...
Click to collapse
There is, however, one problem with the given TWRP:
Before flashing SuperSU, I did format, or exactly, mount /data.
But when the phone was rebooted again, /data resumed unmounted, resulting in failure in flashing other ZIPs (It said "unable to mount /system").
Then I got the phone rebooted, the terrible bootloop occurred again!
That is to say, we have to flash all ZIPs in one time after mounting /data without rebooting the phone, but sometimes this is not possible.
Now my phone has gone back again to Android 7.1.1, and I think I have to wait for an official TWRP that supports Android 8.0 thoroughly on C9 Pro!
[email protected] said:
I have tried almost every combination ended up getting bootloop always except when I tried these;
1. Install stock firmware and csc (not home csc this will fully wipe the phone)
2. After finishing it enters to recovery and updates the system. Keep hold of pressing the volume down+home key to enter to download mode as soon as it finishes installing system update.
3. install twrp from here https://www.androidfilehost.com/?fid=1322778262903985796 (original thread https://forum.xda-developers.com/c9-pro/development/twrp-c9ltechn-t3646970 sometimes links can be dead. In that case you can find new link from that thread).
4. Keep holding of pressing Volume Up+Home key while installing twrp to boot into recovery as soon as the phone reboots.
5. While in recovery flash this SuperSU https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012 (Located in this thread https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012 as "*** Xperia users, and others experiencing bootloops ***
Please use this version instead: "
Your phone should boot normally to setup screen.
After You finish setup you should see supersu icon and your phone should be rooted.
I haven't tested but if your phone is in working condition right now you can try from step 3 to not lose your data.
Good Luck -
Click to expand...
Click to collapse
[email protected] said:
I have tried almost every combination ended up getting bootloop always except when I tried these;
1. Install stock firmware and csc (not home csc this will fully wipe the phone)
2. After finishing it enters to recovery and updates the system. Keep hold of pressing the volume down+home key to enter to download mode as soon as it finishes installing system update.
3. install twrp from here https://www.androidfilehost.com/?fid=1322778262903985796 (original thread https://forum.xda-developers.com/c9-pro/development/twrp-c9ltechn-t3646970 sometimes links can be dead. In that case you can find new link from that thread).
4. Keep holding of pressing Volume Up+Home key while installing twrp to boot into recovery as soon as the phone reboots.
5. While in recovery flash this SuperSU https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012 (Located in this thread https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012 as "*** Xperia users, and others experiencing bootloops ***
Please use this version instead: "
Your phone should boot normally to setup screen.
After You finish setup you should see supersu icon and your phone should be rooted.
I haven't tested but if your phone is in working condition right now you can try from step 3 to not lose your data.
Good Luck -
Click to expand...
Click to collapse
I tried your guide & used Magisk v17.2 instead of SuperSU at step 5 & successfully resolved the bootloop problem, but I did encounter the problem of data not mounting even after flashing ashyx_dm-verity zip:
jasonc417 said:
There is, however, one problem with the given TWRP:
Before flashing SuperSU, I did format, or exactly, mount /data.
But when the phone was rebooted again, /data resumed unmounted, resulting in failure in flashing other ZIPs (It said "unable to mount /system").
Then I got the phone rebooted, the terrible bootloop occurred again!
That is to say, we have to flash all ZIPs in one time after mounting /data without rebooting the phone, but sometimes this is not possible.
Now my phone has gone back again to Android 7.1.1, and I think I have to wait for an official TWRP that supports Android 8.0 thoroughly on C9 Pro!
Click to expand...
Click to collapse
If anybody has a solution for this problem I'd be glad to here it
Follow those steps
shokolatha said:
I tried your guide & used Magisk v17.2 instead of SuperSU at step 5 & successfully resolved the bootloop problem, but I did encounter the problem of data not mounting even after flashing ashyx_dm-verity zip:
If anybody has a solution for this problem I'd be glad to here it
Click to expand...
Click to collapse
2 days ago I flashed again the Android 8.0 ROM into my C9 Pro with Root successfully, through which I found the actual problem:
The given TWRP only supports the specific SuperSU zip, and while I flash other zip files, the bootloop occurs again. That's why I surrender flashing Xposed zip.
AL_IRAQI said:
Follow those steps
Click to expand...
Click to collapse
Well done
I can confirm that I have enabled mounting data partition in TWRP after using your mentioned Disable_Dm-Verity_ForceEncrypt_09.02.2018 zip file, Although I haven't followed your steps exactly
I have mentioned my steps in earlier reply.
Thanks
AL_IRAQI said:
Follow those steps
Click to expand...
Click to collapse
Thanks first.
Well, I do have a question: can I flash other zip files, like Xposed, with your given TWRP without phone bootloop?
Thanks!
New thread with root guide on oreo (8.0) step by step with required files would be appreciable.
AL_IRAQI said:
Follow those steps
Click to expand...
Click to collapse
Last night I tried this again following the steps, and finally the flash of Xposed and other 3rd-party zip were successfully!
Only one problem: an app named "Toggle Data" could not be run properly.
Again, thanks a lot!
How to do, C9 Pro with Root successfully?
jasonc417 said:
2 days ago I flashed again the Android 8.0 ROM into my C9 Pro with Root successfully, through which I found the actual problem:
The given TWRP only supports the specific SuperSU zip, and while I flash other zip files, the bootloop occurs again. That's why I surrender flashing Xposed zip.
Click to expand...
Click to collapse
Can you explain, how to root C9 Pro with Androis 8.0 ROM.
Thanks a lot.
Murat
[email protected] said:
Can you explain, how to root C9 Pro with Androis 8.0 ROM.
Thanks a lot.
Murat
Click to expand...
Click to collapse
You need to download and install travis's twrp after that format data , flash magisk 17.2 , flash dm verity and reboot
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
YusufGKT said:
You need to download and install travis's twrp after that format data , flash magisk 17.2 , flash dm verity and reboot
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Hmmm, I don't want to format data. If find another way, better.
Thanks a lot,
Murat
[email protected] said:
Hmmm, I don't want to format data. If find another way, better.
Thanks a lot,
Murat
Click to expand...
Click to collapse
Twrp doesnt support samsung encryption so ypu need to flash dm verity and that needs format data
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
NOTE :I AM NOT A DEVELOPER.THIS IS JUST THE FINAL RESULT OF MY "HIT & TRIAL" FOR OVER A WEEK.PLEASE MAKE A BACKUP IN TWRP OF UR SYSTEM BEFORE DOING THIS.
INSTALLING FULLY FUNCTIONAL MAGISK WAS REALLY TROUBLESOME FOR ME(E6533)
sometimes it was showing error while flashing
SOMETIMES it was flashed without error but system failed to reboot/bootloopedcredits:
@topjohnwu for magisk
I have tested this and is working fine in my xperia z3+ dual(E6533)...but m sure it will work with all models of z3+/z4.so try it & let others know it.
PREREQUISITES:
1.ur firmware/rom must be nougat 7.1. [please dont try on MM/LP]
2.USB DEBUGGING AND INSTALLATION OF UNKNOWN SOURCE MUST B ENABLED.
2.FIRMWARE should be un-rooted[ if u have installed supersu/tried magisk earlier/failed/erronous attempt of installing magisk.........then use unsu.zip /magisk uninstaller before proceeding]
3.the boot image(new_kernel) over which magisk will be installed is stock nougat 7.1.1 so this method will work in any rom which can be booted via stock boot image.eg.it will work on m-rom and stock (m sure of it)
4.twrp must be installed
5.basic knowledge of fastboot commands for flashing kernel
lets start....
1.in twrp first of all clean any traces of supersu/failed magisk installation by flashing "unsu.zip or magisk uninstaller"
2.power off ur device and then flash the "new_kernel.img via fastboot....use these commands
a.imp to check whether the kernel will boot in ur device or not (if this step shows any error,plz dont proceed to b.
in cmd window : fastboot boot new_kernel.img
b.to flash the kernel
in cmd window :fastboot flash boot new_kernel.img
IMP:steps 1 & 2 are can also be used when u have met with an unexpected bootloop/restart problem at any time( if u don't want to flash the complete stock ftf,this boot image will help u in letting ur device come out of bootloop.
3.proceeding to our main thread....now boot into recovery & flash "magisk.zip"
4.wipe cache & dalvik.and reboot.
PROPERTIES OF THE KERNEL (new_kernel.img:---
Build 32.4.A.1.54
1. Sony RIC- disabled.
2. DM-Verity- disabled.
3. TWRP- disabled.
4. DRM Fix- enabled.
5. Superuser / root- Not present. ( flash magisk its better)
6. Busybox- Not present
7.many more tweaks to reduce heat & increase battery backup
LINK TO THE CONTENT
https://drive.google.com/drive/folders/1ic9zsMi576s1P9H6s1z4_g0ofSJJktIs?usp=sharing
I just want stock rooted rom with magiks
doctorsworld99 said:
NOTE :I AM NOT A DEVELOPER.THIS IS JUST THE FINAL RESULT OF MY "HIT & TRIAL" FOR OVER A WEEK.PLEASE MAKE A BACKUP IN TWRP OF UR SYSTEM BEFORE DOING THIS.
INSTALLING FULLY FUNCTIONAL MAGISK WAS REALLY TROUBLESOME FOR ME(E6533)
sometimes it was showing error while flashing
SOMETIMES it was flashed without error but system failed to reboot/bootloopedcredits:
@topjohnwu for magisk
I have tested this and is working fine in my xperia z3+ dual(E6533)...but m sure it will work with all models of z3+/z4.so try it & let others know it.
PREREQUISITES:
1.ur firmware/rom must be nougat 7.1. [please dont try on MM/LP]
2.USB DEBUGGING AND INSTALLATION OF UNKNOWN SOURCE MUST B ENABLED.
2.FIRMWARE should be un-rooted[ if u have installed supersu/tried magisk earlier/failed/erronous attempt of installing magisk.........then use unsu.zip /magisk uninstaller before proceeding]
3.the boot image(new_kernel) over which magisk will be installed is stock nougat 7.1.1 so this method will work in any rom which can be booted via stock boot image.eg.it will work on m-rom and stock (m sure of it)
4.twrp must be installed
5.basic knowledge of fastboot commands for flashing kernel
lets start....
1.in twrp first of all clean any traces of supersu/failed magisk installation by flashing "unsu.zip or magisk uninstaller"
2.power off ur device and then flash the "new_kernel.img via fastboot....use these commands
a.imp to check whether the kernel will boot in ur device or not (if this step shows any error,plz dont proceed to b.
in cmd window : fastboot boot new_kernel.img
b.to flash the kernel
Click to expand...
Click to collapse
I don't want to use any new kernel .can I flash the magiks.zip directly in twrp
Sumantomar1709 said:
I don't want to use any new kernel .can I flash the magiks.zip directly in twrp
Click to expand...
Click to collapse
u can try flashing magisk over stock.but whenever i did that my device used to go into bootloop.thats why i've to experiment with different twrps,kernels to detect the culprit.
finally i got this awesome kernel which helped me to come out of bootloops everytime.so i will suggest to use this [near to stock ] kernel .
but u can try flashing magisk over stock.....if anything goes wrong ,,,just flash the new_kernel,,and ua fine to go with magisk.
Thnx. I will try & let u know.
thank u sirThis kernel help me from bootloop .how did u make this kernel
Champsingh909 said:
thank u sirThis kernel help me from bootloop .how did u make this kernel
Click to expand...
Click to collapse
i didn't make it buddy....i tried kernels from stock /m-rom /kryptonian /LOS & one i found in generall section .its one of them .....i don't know exactly which one is it.but with this one i was able to boot evertime
This kernel really working in bootloop.thnx
doctorsworld99 said:
i didn't make it buddy....i tried kernels from stock /m-rom /kryptonian /LOS & one i found in generall section .its one of them .....i don't know exactly which one is it.but with this one i was able to boot evertime
Click to expand...
Click to collapse
it is really a good kernel but wondeering why it was not posted anywhere before.u should post this in kernel section so many users will be benefitted.btw thanks alot
Champsingh909 said:
it is really a good kernel but wondeering why it was not posted anywhere before.u should post this in kernel section so many users will be benefitted.btw thanks alot
Click to expand...
Click to collapse
creating a separate thread isn't a good idea ,i'll update the details of the kernel in this thread itself,plz give me some time.
Kernel properties added.
Wait... Installing Magisk caused a bootloop for you? Never happened to me tho.
LoaderFabi said:
Wait... Installing Magisk caused a bootloop for you? Never happened to me tho.
Click to expand...
Click to collapse
i got frequent bootloops on installing it over stock kernel and also over m-rom .i think the kernel was the culprit.
Recently I unlocked the bootloader of my Z4 single sim (E6553), but I accidentally lost the TA partition backup. Now I have LOS 14.1 but it's not good at all, I want to return to the stock firmware.
I read here that this kernel have the "DRM Fix- enabled." , what means? If I flash this kernel I can use again every features like BionZ, Bravia Engine, etc ?
chrnodroid said:
Recently I unlocked the bootloader of my Z4 single sim (E6553), but I accidentally lost the TA partition backup. Now I have LOS 14.1 but it's not good at all, I want to return to the stock firmware.
I read here that this kernel have the "DRM Fix- enabled." , what means? If I flash this kernel I can use again every features like BionZ, Bravia Engine, etc ?
Click to expand...
Click to collapse
Hopefully yes,flash it as instructed.best of luck:good:
Anyone tested if the Kernel is "DRM FiX ready"? Im planning to root my Z3+ (E6533) without backing up my TA, but if this Kernel is equipped with DRM Fix I would go with this one.
MrHands0m3 said:
Anyone tested if the Kernel is "DRM FiX ready"? Im planning to root my Z3+ (E6533) without backing up my TA, but if this Kernel is equipped with DRM Fix I would go with this one.
Click to expand...
Click to collapse
confirmed!! this kernel is the ****!.. try it... (don't blame me if you brick your device)
The link to download the kernel won't work anymore, is there a mirror?