Database Users

May of soft bricked phone?

I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?

ryannnnn said:
I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
Click to expand...
Click to collapse
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko

urko95 said:
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
Click to expand...
Click to collapse
It's fixed, i flashed CM 10.2 RC2 in CWM it worked, then i flashed 4.3 GP addition and it's fine. WiFi doesnt work but i guess thats a new issue
Thanks!

[Q] help please..... phone bricked :(

my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.
when i try to flash a stock room using Odin getting below error:
power + home + volume down > AP > choose tar file(N9005XXUDML2) > start
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help please.... :crying::crying::crying:

musheercmr said:
my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.
when i try to flash a stock room using Odin getting below error:
power + home + volume down > AP > choose tar file(N9005XXUDML2) > start
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help please.... :crying::crying::crying:
Click to expand...
Click to collapse
Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader
You can try to write stock 4.4.

xclub_101 said:
Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader
You can try to write stock 4.4.
Click to expand...
Click to collapse
what if flash N9005XXUEND6 using odin? will it work ?

musheercmr said:
what if flash N9005XXUEND6 using odin? will it work ?
Click to expand...
Click to collapse
If it is for the same model and region as your N9005 it could/should work, otherwise you might still see problems. Be careful not to confuse Hong-Kong 16GB model with EU 32GB models, also there have been some problems with other hardware or CSC combinations.

S4 I9505 root failer

Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
-----------------------Solved -------------------------------
I tried a new cable and it fixed the issue

i
llDrewll said:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
Click to expand...
Click to collapse
Check this, it seems same issue;
http://forum.xda-developers.com/galaxy-s3/help/nand-write-start-completewrite-t1846867
don't download anything from that thread just read what happened
as one of member mentioned there & Also in ur logs
thr s problem in NAND write operation
SO search "fix NAND Corrupted" or something like this.
i searched little bit but do it urself...
some opinions;
wipe ur phone through recovery (built-in recovery i mean)
and then try again....
:good:

llDrewll said:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
Click to expand...
Click to collapse
First of all I hope for your good that you have usb debugging enabled. Try to right click odin executable and run as administrator. After that restart flashing. It should work. Good luck.

Hiya Guys
Thanks for the advice so far, i have tried running oden as admin since the issue started with oden 3.09 and 3.07
I downloaded a stock firmware over night and received this error
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
i have tried holding the power home and up button to get my phone in to recovery but it just goes to the
"firmware upgrade encountered an issue. please select recovery in kies and try again"
screen
I am picking up a new cable today that i hope may fix the issue, i check the forum thread posted but it ended up in the user needing a new phone sadly
Any other thoughts?
Thanks for your time and help so far

Just try the basic stuff:
- Different usb port
- Different pc
- Different cable.
99% of the Odin problems is solved with it.

Thanks for the reply,
I have a different cable to test with when i get home tonight and i can try using my girlfriends laptop as well so thanks for the advice so far
I have a quick question, as i haven't had much trouble routing with the cf auto root i thought maybe i could just put a clean install of stock on my phone to get it working.
I left this firmware "I9505XXUFND7" downloading from sammobile.com before i left for work this morning, i am pretty sure it is correct for my GT-I9505 (no idea what the carrier was as it came unlocked and i am unsure of how to check).
Would anyone be kind enough to confirm this is the correct firmware or if it is wrong let me know which i should be using?
Thanks so much for your help so far people it really means a lot, sorry for the noob questions

Hi guys,
This is just a quick thank you for your help i tried a new cable and the firmware and it fixed the issue

glaxy grand prime failed in odin with stock rom .

hi xda world
my gp sm-g530H failed when i try to odin stock rom .
i installed it before and this time couldn't
please help me .
this is download mode fail ..
i coudn't put an image
secure check fail : aboot
and this is odin log :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2AOA3_G530HOJV1AOD1_G530HXXU2ANL4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
now there's an update
i extract stock rom and remove files which fail
they are
aboot.mbn
hyp.mbn
modem.bin
non-hlos.bin
rpm.mbn
sbl1.mbn
sec.dat
tz.mbn
and tar other files :-
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
they are flashed normal and the phone open
but they are some bugs such as wifi dosn't work
pleas help me ...

mohager52 said:
hi xda world
my gp sm-g530H failed when i try to odin stock rom .
i installed it before and this time couldn't
please help me .
this is download mode fail ..
i coudn't put an image
secure check fail : aboot
and this is odin log :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2AOA3_G530HOJV1AOD1_G530HXXU2ANL4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
Try another com port. (Use another usb slot)

ActivNoiz said:
Try another com port. (Use another usb slot)
Click to expand...
Click to collapse
I do that and so try the official cable and other cables .

mohager52 said:
I do that and so try the official cable and other cables .
Click to expand...
Click to collapse
I think its a problem with drivers....try on another pc. I was same problem with I9070....delete and reinstall drivers no help at all.

i have same problem, i tried flash with cf autoroot. no luck. phone keep restart on boot.
then i flash cwm, and... voillaaaa it work!! :victory: no data on my phone erased. and i dont know why,but my recovery still on stock recovery.
here the link cwm mega*nz/#!SQ8XkIiI!Kj_9rhfVY8bz0nRjZGDGra4Bs3Nen-87O4vhWGHlVzc (change * with . )

stock firmware of a300f for a300f/ds

hello, this is my first post, so take it easy on me, I have an SM-a300f/ds and I rooted the phone, it was on 5.0.2, it worked fine but after a restart the phone did not boot up and I cannot enter recovery, the only choice I have is download mode (bootloader). And I found out this issue exist. now in order to make the phone work again i need to install the stock firmware and i download one, it was "4.4.4 Russia" from sammobile, the result was fail. the phone was bought in Iraq, so could it have been the "country/carrier" thing that it failed?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
now i wonder if the firmware for A300f is the same as A300f/ds
if A300f/ds has different firmware then where can i find it, your help is appreciated.
note: i also own a gti9300 and i have flashed thousands of roms.

hawre96 said:
hello, this is my first post, so take it easy on me, I have an SM-a300f/ds and I rooted the phone, it was on 5.0.2, it worked fine but after a restart the phone did not boot up and I cannot enter recovery, the only choice I have is download mode (bootloader). And I found out this issue exist. now in order to make the phone work again i need to install the stock firmware and i download one, it was "4.4.4 Russia" from sammobile, the result was fail. the phone was bought in Iraq, so could it have been the "country/carrier" thing that it failed?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
now i wonder if the firmware for A300f is the same as A300f/ds
if A300f/ds has different firmware then where can i find it, your help is appreciated.
note: i also own a gti9300 and i have flashed thousands of roms.
Click to expand...
Click to collapse
Did u unplug the phone while it was downloading?
If not flash twrp through odin, then enter in recovery (you should able to do this) and wipe data, cache, dalvik and system, then flash the stock firmware

DeadSquirrel01 said:
Did u unplug the phone while it was downloading?
If not flash twrp through odin, then enter in recovery (you should able to do this) and wipe data, cache, dalvik and system, then flash the stock firmware
Click to expand...
Click to collapse
I did not unplugged it after rooting it, however the problem was solved a while ago by restarting the phone after an hour of leaving it, thank you for your help

hawre96 said:
I did not unplugged it after rooting it, however the problem was solved a while ago by restarting the phone after an hour of leaving it, thank you for your help
Click to expand...
Click to collapse
No problem, I'm happy u solved the problem