Database Users

[Q] Bricked my Spica. I guess...

Hi
after trying YONIP kernel i get stuck in boot logo, keeps rebooting, pressing volume down + camera + power dont go to download mode, goes to normal boot and get stuck there...... what can i do?

1. get phone into download mode, connect USB cable
2. start Odin, load spica_jc3.ops as OPS file and any package flashable by odin- kernel, backup, firmware etc
3. except for standard flashing options check also Debug ONLY and Parameter Clear
4. flash

my phone can't turn on.not up new rom,black screen,not recovery mode,but downloading mode still active.
i don't writed english.
help.

me too
i think it's dead
or someone can help us ?

If you can access download mode- flash official firmware using Odin. Except standard options check also Debug ONLY and Parameter Clear.
If this doesn't help- check Debug ONLY, Parameter Clear and PDA Format.
Do not touch under any circumstances Phone EFS Clear- this will erase your IMEI

gen_scheisskopf said:
1. get phone into download mode, connect USB cable
2. start Odin, load spica_jc3.ops as OPS file and any package flashable by odin- kernel, backup, firmware etc
3. except for standard flashing options check also Debug ONLY and Parameter Clear
4. flash
Click to expand...
Click to collapse
Many thanks man. U saved my time. I had similar problem with my Samsung Gio. Now I was able to flash new firmware.
Best wishes!

ribamar23 said:
Hi
after trying YONIP kernel i get stuck in boot logo, keeps rebooting, pressing volume down + camera + power dont go to download mode, goes to normal boot and get stuck there...... what can i do?
Click to expand...
Click to collapse
If it is solved then good...... you can check this thread ifnot
http://forum.xda-developers.com/showthread.php?t=1153310

[q] urgent!!! How to install cwm on soft bricked lenovo a6000 plus

How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:

query
I am also having the same problem......
can anyone help?
please plesae

vokkus kreatif said:
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
Click to expand...
Click to collapse
Same here...
Did you find any solution

lenovo a60000 ran into problem
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.

SAME same seems like there is no help out there and we might have to use our phones as paperweight!

hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all

sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
thanks a lot dude finally my phone got new life thanks to you and boycracked

Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me

vinod352 said:
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
Click to expand...
Click to collapse
1. Download custom recovery for lenovo a6000 lollipop, just googling "[A6000]TWRP-2.8.6.0_no_theme.img" (without quotes)
2. download installation zip of supersu from chainfire, just googling "BETA-SuperSU-v2.49.zip" (without quotes)
3. Enter to fastboot, type "fastboot boot [A6000]TWRP-2.8.6.0_no_theme.img" (without quotes) in cmd/terminal. wait for a moment... until your phone land on custom recovery (TWRP)
4. flash file "BETA-SuperSU-v2.49.zip".

Sent from my Lenovo A6000 using XDA Free mobile app
Bro Thanx for reply.I will try and I'll tell here if it success

Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?

Thanks!
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
Thanks.
I did see the boycracked website but i couldn't get my deivce into 9008 mode..thanks a lot

Not able to enter the recovery
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...

BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Flash stock recovery with fastboot

BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it

gks131 said:
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
Click to expand...
Click to collapse
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??

BenNy tHa said:
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
Click to expand...
Click to collapse
If you are on lollipop flash this one
http://www.mediafire.com/?7d6aoevnk52cg5i
Use fastboot flash recovery recovery.img

My phone does not reboot

batmanx0369 said:
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
Click to expand...
Click to collapse
same problem ; please post if u have found a solution

kanna9999 said:
same problem ; please post if u have found a solution
Click to expand...
Click to collapse
Just use fastboot to flash twrp 3.0.0 by sevenmax (just Google it)
Command:
Fastboot flash recovery (then recovery name.zip or .img)
Then flash from it the rom you like
Sent from my GT-I9300I using Tapatalk

S5 Stuck on samsung logo after flashing Philz recovery

This is the first time I'm rooting my phone. Process went smooth upto granting Super user excess to RashR (Flash Tool). And Download Philz Recovery Zip. After that I can only see Samsung Logo. Please Help!
PS: It's not going into Recovery Mode.

What S5 variant do you have and what version of Android are you running?

InsanePostman said:
What S5 variant do you have and what version of Android are you running?
Click to expand...
Click to collapse
G900H. Lollipop. I used Odin with this file - CF-Auto-Root-k3g-k3gxx-smg900h.tar (the process I used for rooting). It has come out of boot sleep. When I'm trying to go into recovery mode, it gets stuck at Logo. My phone is working right now but doesn't go into recovery mode. Can you help me solve this? I want to try Marshmallow. Thanks!

make sure the MD5 hash matches, if you don't know how to hash MD5 look it up, if it fails just redownload the recovery tar because your download was corrupted
---------- Post added at 02:48 PM ---------- Previous post was at 02:48 PM ----------
and don't use download managers

complexiscool said:
G900H. Lollipop. I used Odin with this file - CF-Auto-Root-k3g-k3gxx-smg900h.tar (the process I used for rooting). It has come out of boot sleep. When I'm trying to go into recovery mode, it gets stuck at Logo. My phone is working right now but doesn't go into recovery mode. Can you help me solve this? I want to try Marshmallow. Thanks!
Click to expand...
Click to collapse
Try to flash TWRP recovery

Use ODIN to flash recovery, not some flash tool from G Play, it might have flashed the wrong version recovery
With ODIN, you do it manually, so if you flash the wrong version, it's because you didn't check it first, not because you let some random app do it for you

*Detection* said:
Use ODIN to flash recovery, not some flash tool from G Play, it might have flashed the wrong version recovery
With ODIN, you do it manually, so if you flash the wrong version, it's because you didn't check it first, not because you let some random app do it for you
Click to expand...
Click to collapse
Hi,
Can you please refer a link which I can follow. I followed steps from a youtube video(with a good number of likes and views) which lead to this. I've zero experience in rooting and all. Any help will be highly appreciated. Thanks!

complexiscool said:
Hi,
Can you please refer a link which I can follow. I followed steps from a youtube video(with a good number of likes and views) which lead to this. I've zero experience in rooting and all. Any help will be highly appreciated. Thanks!
Click to expand...
Click to collapse
Loads of guides kicking about here in the S5 forum
Basically grab TWRP 2.8.7.0 .TAR for your model S5, load it into the AP or PDA section of ODIN, put your phone in download mode (Vol down & Home & Power from a powered off state), connect phone to PC USB, make sure drivers are installed, then hit start on ODIN
It should start the flashing process, and say success once done

*Detection* said:
Loads of guides kicking about here in the S5 forum
Basically grab TWRP 2.8.7.0 .TAR for your model S5, load it into the AP or PDA section of ODIN, put your phone in download mode (Vol down & Home & Power from a powered off state), connect phone to PC USB, make sure drivers are installed, then hit start on ODIN
It should start the flashing process, and say success once done
Click to expand...
Click to collapse
I tried using Odin and nothing happened. Tried using TWRP Manager. Getting this error - "Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?"

complexiscool said:
I tried using Odin and nothing happened. Tried using TWRP Manager. Getting this error - "Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?"
Click to expand...
Click to collapse
What do you mean, nothing happened with ODIN?
Did you add the TWRP .TAR (Do not extract)?
Phone was in download mode?
Drivers were installed?
Could ODIN see the phone? Did it show the COM port at the top?

*Detection* said:
What do you mean, nothing happened with ODIN?
Did you add the TWRP .TAR (Do not extract)?
Phone was in download mode?
Drivers were installed?
Could ODIN see the phone? Did it show the COM port at the top?
Click to expand...
Click to collapse
1. I meant when I clicked on Start, a blue bar came in download mode, and phone restarted.
2. Yes
3. Yes
4. Yes

complexiscool said:
1. I meant when I clicked on Start, a blue bar came in download mode, and phone restarted.
2. Yes
3. Yes
4. Yes
Click to expand...
Click to collapse
OK, a common problem
Uncheck the "Auto reboot" setting in ODIN
When it's finished flashing, unplug the phone and pull the battery out of the phone, replace it, and boot straight into recovery with vol up, Home and Power

Big Trouble, phone bricked no solution found...

Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.

Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47

gm007 said:
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
Click to expand...
Click to collapse
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.

forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
You can use that HWOTA method to recovery FullOTA rom no need to use FunkyHuawei.

forati89 said:
Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Click to expand...
Click to collapse
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..

m_adnan said:
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
Click to expand...
Click to collapse
To boot into bootloader mode you have to plug the usb and hold volume down while booting.

gm007 said:
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
Click to expand...
Click to collapse
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)

m_adnan said:
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Click to expand...
Click to collapse
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.

gm007 said:
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
Click to expand...
Click to collapse
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..

m_adnan said:
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
Click to expand...
Click to collapse
Maybe you still have twrp installed?
Volume up + power without connecting usb.

gm007 said:
Maybe you still have twrp installed?
Volume up + power without connecting usb.
Click to expand...
Click to collapse
already tried, but without success.. it always end in that error mode..

forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
how you managed to restore stock recovery? with frp only reading is allowed in fastboot i thought?
same probs here with my p10 vtr-l09 but cant get to one of the recoverys .. how can i tell the frp lock that everything is fine with my fastboot commands?
Sent from my HUAWEI HUAWEI GRA-L09 using XDA Labs

hi, did you manage to solve this problem?

Bricked S8, have tried multiple solutions

I successfully rooted my phone but it got stuck in a bootloop when I restarted it.
I can't enter recovery mode or turn it off, all I can do is enter odin mode.
I have tried:
1. The AGQ5 fix (https://forum.xda-developers.com/ga...g-aqg5-fix-t3636857/post73032395#post73032395) it doesn't work.
2. Smart switch, it says my device is unsupported
Please help!

1- flash twrp again
2- flash stock rom with odin ( download mode )
you can reboot just with vol - + shut down B

you maybe installed the wrong version of twrp the latest one is for the new bootloader if you have the older bootloader install the last version

It doesn't boot into TWRP even after I flash it again

djisgod said:
you maybe installed the wrong version of twrp the latest one is for the new bootloader if you have the older bootloader install the last version
Click to expand...
Click to collapse
Sorry if I'm asking a question but how do I check my bootloader version? I just used the latest version (twrp-3.1.1-0-herolte.img.tar) from a site but I can't link it.

popmpopm said:
1- flash twrp again
2- flash stock rom with odin ( download mode )
you can reboot just with vol - + shut down B
Click to expand...
Click to collapse
It doesn't boot into TWRP even after I flash it again

Flash full stock in odin. Then you can try twrp again if you wish.

It worked, thanks so much for all your help. Words cannot describe how grateful I am.

help
osidaksjdmw said:
It worked, thanks so much for all your help. Words cannot describe how grateful I am.
Click to expand...
Click to collapse
help me
how can did you get to download

HELP ! S8 Wont BOOT !!
I have the same problme! I can flash Combination file and then its booting and I can go to recovery mode ,but after when I flash again STOCK rom succesfully ,S8 wont boot Any Idea what is going on ? Im on U2CRED ....PLEASE HELP !!!!

zassamel said:
I have the same problme! I can flash Combination file and then its booting and I can go to recovery mode ,but after when I flash again STOCK rom succesfully ,S8 wont boot Any Idea what is going on ? Im on U2CRED ....PLEASE HELP !!!!
Click to expand...
Click to collapse
I can flash Combination file
Click to expand...
Click to collapse
What this supposed to me ?

samsung s8
StonebridgeGr said:
What this supposed to me ?
Click to expand...
Click to collapse
Combination File ,its AP witch allow you to bypass for example FRP lock

osidaksjdmw said:
I successfully rooted my phone but it got stuck in a bootloop when I restarted it.
I can't enter recovery mode or turn it off, all I can do is enter odin mode.
I have tried:
1. The AGQ5 fix (https://forum.xda-developers.com/ga...g-aqg5-fix-t3636857/post73032395#post73032395) it doesn't work.
2. Smart switch, it says my device is unsupported
Please help!
Click to expand...
Click to collapse
EXACT same problem. Put I cant flas anything via Odin. Not even TWRP. What do I do???
PLEASE help

benna said:
EXACT same problem. Put I cant flas anything via Odin. Not even TWRP. What do I do???
PLEASE help
Click to expand...
Click to collapse
why you cant? what error did it give you? might you dont have drivers installed on your pc?

StonebridgeGr said:
why you cant? what error did it give you? might you dont have drivers installed on your pc?
Click to expand...
Click to collapse
ODIN MODE
DOWNLOAD SPEED : FAST
NAME: SM-G950F
CURRENT BINARY: CUSTOM
SYSTEM STSTUS : CUSTOM
RMM STATE: PRENORMAL
FAP LOCK: OFF
OEM LOCK : OFF
SECURE DOWNLOAD: ENABLED
SW REV. CHECKFAIL(BOOTLOADER) DEVICE :2 BINARY :1
I can ONLY boot into download mode.
When switching on the phone , I get the Galaxy S8 logo by Samsung with the red writing on the top:
"Only officiall released binaries are allowed to be flashed"
Flashing original firmware via ODIN just fails.
"Complete (write) operation failed !!" is the error in Odin.
I tried different versions of Odin , original firmware and boot loaders suggested on XDA. All just fails.
So my phone is just dead.
I had the lasted firmware on ( OTA update about a week ago)
I installed TWRP now , roooted with Magisk , all was fine untill I rebooted the phone.
So drivers and all are fine , everything worked until I rebooted the phone.
Please help. What to do now. I need my phone !!!
PLEASE