Related
Please note that I have done search and tried various solutions before starting this thread :
Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following :
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/
but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work
I have also tried this
http://forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
but it has ADB killed (tried looking and installing adbfixer solution--it says it cannot finf adb.exe even though it is there)
Is there any soultion to this!!! Please help if there is one!
the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
install cwm
Install cwm from pc and then try
Use HW flash tool
Even my Lenovo a6000 plus was bricked. But mine is more complicated than your's.
I've installed CWM recovery before. But unable to access it, atleast native Android recovery either.
"Rev-app" folder from "System" folder were deleted unfortunately. I couldn't even wipe, hard reset or anything.
After a long struggle, i've found a way out. I've came across a Qualcomm flash tool "HW OneKeyDownload Tool".
And finally, i won on it!
Download it from here: docs.google(.)com/uc?id=0B3qYFBKKL2hieDM1RUNMQWRsSHc
You need to have:
1. Mobile drivers installed
2. Universal ADB drivers (That ZIP will have it)
3. Stock ROM or any custom ROM
See this post on AndroidXDA for more info:
androidxda(.)com/download-hw-onekeydownload-tool
install cwwm
installing cwm from pc is the best way to unbrick
Dont feel bro.just follow the steps which u tried before to install cwm.but before that if ur pc cant find ur mobile.then use this command.
"Adb shell"
And it shows searching for device.
Then put ur battery out and insert it again.ur device will be detect by pc.
Sent from my Lenovo A6000 using XDA Free mobile app
am also getting this same issue. Please help me.
sp_grewal said:
Please note that I have done search and tried various solutions before starting this thread :
Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following :
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/
but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work
I have also tried this
http://forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
but it has ADB killed (tried looking and installing adbfixer solution--it says it cannot finf adb.exe even though it is there)
Is there any soultion to this!!! Please help if there is one!
Click to expand...
Click to collapse
Recently I was tried to update mobile firmware (latest Kraft-A6000-S_S014_150730) by OTA update (via system settings->about phone->system update), that time my mobile was soft bricked like above you said. I downloaded firmware and installed then some time after got some options menu. And I attached that problem as picture.
Before that I rooted my mobile using KINGROOT apk v4.0 , there after I did unroot again using in the same app.
I thought unrooted mobile does not affect by system update (any firmware or OTA update by LENOVO). But unfortunately my mobile got problem.
I didn't took any backup before that. I don't know anything about CWM backup and all. I know only the root and unroot using KINGROOT app.
I need to recover my mobile back or tell me how to install LENOVO A6000 PLUS stock ROM or any other way is there tell me to solve the problem. Please guide me step by step process or any video link there it was little better to understand for me.
Please help me, it will be appreciated. Thanks.
Attach the device to PC through USB cable and Install the CWM through ADB .
Install the Stock Kernel through Update Zip option within the CWM.
That will freshly installs the Android OS.
DO NOT FLASH HYDROGEN ROMS ON HELIUM, OR YOU GONNA HAVE A HARDBRICK.
IN CASE YOU HAVE ONE, HERE IS THE SOLUTION.
This was tested with Xiaomi Mi Max 128GB helium and localized rom from xiaomi eu.
I am not responsible for bricked devices or anything else. So at your own risk:
1. Install official MiPhone drivers
2. Download and install MiFash beta.
3. Download and unpack TWRP for miflash: 32gb or 64-128gb thanks @Abdess76.
4. Download ROM for your device, I recommend to try this one. You can install RR/CM Rom as well.
5. Run MiFlash with admin rights.
6. Turn off the phone, plug the cable to PC and halfway to the phone.
7. At the same time press Volume + and Volume - and plug in the cable.
8. Refresh MiFlash phone should show up. (If it didn't then make sure you did it right and u got drivers)
9. Navigate to your unpacked TWRP and flash it.
10. Now, boot ur phone with volume up. It's a bit slow. If it's stuck on miui logo, just release button and wait.
From here start to pay more attention:
11. TWRP can ask for password, press cancel and allow modifications by moving slider.
If you just need ROOT and your current rom, skip to the step 16. Also there is a recovery from boot in system folder. If you won't remove it, recovery may be replaced with stock one after reboot. Keep it that way if you want OTAs.
12. Format data.
13. Enable MTP and put modified zip in your phone.
14. Go to mounts and unmount system **
15. Flash your rom.
16. Flash latest supersu.
17. Reboot the phone.
In case u got NO OS message, then it means that u probably ignored step 15.
Also first boot may take like 15-20 minutes, since eu rom is deodexed.
Just to be sure, after installation mount system partition and navigate to the /system folder using TWRP's file manager and make sure it's not empty.
* In my case system didn't install because script could mount system partition since it was already mounted.
P.S. In order to update, you need to install OTA for offical rom via TWRP. Then without rebooting flash SuperSU, and finally using TWRP's file manager navigate to system folder and delete file named recovery from boot. Doing so will keep root and recovery.
Thank you so much for the guide! I will try it tonite
Waiting for boot loader is just too long..
WOW!!!! Just, wow..... I can not believe it but it worked like a charm. It took me forever to figure out my issue with the drivers, but after solving that I followed you step-by-step. And, lo and behold, it WORKED! Note for other users, Twrp took about a minute or two to finally boot up and it took me personally about 15-20 minutes before MIUI 8 finally booted. Just wait it out and you should have the amazing results that Doom Slayer has so graciously provided you
THANK YOU!!!!
I just done following your guide and it works!!
For rooting, I tried 2 times before it works. I believe you missed out a step to mount back system before flashing supersu.
So in the future, how do we dirty flash? Start from step 13?
How about clean flash? Start from step 12?
Thank you once again for this great guide!!
You saved me a lot of time waiting for Bootloader approval.
flywithme said:
I just done following your guide and it works!!
For rooting, I tried 2 times before it works. I believe you missed out a step to mount back system before flashing supersu.
So in the future, how do we dirty flash? Start from step 13?
How about clean flash? Start from step 12?
Thank you once again for this great guide!!
You saved me a lot of time waiting for Bootloader approval.
Click to expand...
Click to collapse
Yeah, dirty flash is you keep your data and format system and caches .
Clean flash is u format data as well.
The thing is that u have root, and ur phone is also secured. It's linked to ur Mi account, while it's locked. It's better to keep that way
Theoretically If you will ignore steps from 12 to 16. (Maybe u can ignore data formatting too)
Then you can get a ROOT and TWRP on your current rom.
And also theoretically while on miui 8 rom ,u can try to unlock bootloader without waiting.
Try this manual.
I have followed these steps and bricked my phone, spent the last 24h trying to recover it no luck.
I got an error while in the process of flashing the rom at step 16, then tried again and phone went black, stopped responding.
It's not detected using adb or fast boot, it appears in device manager as "Qualcomm HS-USB QDLoader 9008" or "Qualcomm HS-USB Diagnostics 900E", I have tried to flash again TWRP or the official ROM, it says success every time but the phone is still dead.
Could it be due to locked boot loader ?
agreusar said:
I have followed these steps and bricked my phone, spent the last 24h trying to recover it no luck.
I got an error while in the process of flashing the rom at step 16, then tried again and phone went black, stopped responding.
It's not detected using adb or fast boot, it appears in device manager as "Qualcomm HS-USB QDLoader 9008" or "Qualcomm HS-USB Diagnostics 900E", I have tried to flash again TWRP or the official ROM, it says success every time but the phone is still dead.
Could it be due to locked boot loader ?
Click to expand...
Click to collapse
Open it up and remove battery for a few minutes, then try again from step 6...
agreusar said:
I have followed these steps and bricked my phone, spent the last 24h trying to recover it no luck.
I got an error while in the process of flashing the rom at step 16, then tried again and phone went black, stopped responding.
It's not detected using adb or fast boot, it appears in device manager as "Qualcomm HS-USB QDLoader 9008" or "Qualcomm HS-USB Diagnostics 900E", I have tried to flash again TWRP or the official ROM, it says success every time but the phone is still dead.
Could it be due to locked boot loader ?
Click to expand...
Click to collapse
Which rom did u flash, give the link please.
Are u sure it's for your version? It can be a broken file as well.
Does the device connects when u hold both volume buttons?
It's called emergency download mode, u can istall rom with miflasher.
There is a testpoint method also.
All u need is a pic from this post on http://4pda.ru/forum/index.php?showtopic=749580&st=700#entry51154086
U need to disconect battery, connect testpoint to battery and flash ur device with miflash.
After that let it charge, since this in your state phone consumes battery.
thanks for you answer, I flashed the MiMAXPRO EU ROM xiaomi.eu_multi_MIMAXPro_6.8.4_v8-6.0.zip (sorry as a new user not allowed to post a link yet)
When I hold both volume buttons the screen is still black but MI Flasher works with COM10, after flashing a ROM or TWRP again MIFlash says "success" but the phone is still dead and won't start up even after holding power button for a long time.
I'm happy to open the phone and try the method on the russian forum, I will try tomorrow hope it will start up
agreusar said:
thanks for you answer, I flashed the MiMAXPRO EU ROM xiaomi.eu_multi_MIMAXPro_6.8.4_v8-6.0.zip (sorry as a new user not allowed to post a link yet)
When I hold both volume buttons the screen is still black but MI Flasher works with COM10, after flashing a ROM or TWRP again MIFlash says "success" but the phone is still dead and won't start up even after holding power button for a long time.
I'm happy to open the phone and try the method on the russian forum, I will try tomorrow hope it will start up
Click to expand...
Click to collapse
Don't worry about your phone, the testpoint method will work for sure.
But in order to prevent this kind of situations ,we need to determine the reason how did it happen and you need to help me with that one by answering following questions:
1) You have mentioned that you had an error 1st time.
I also had error which was cache related, and it's OK because that partition was just formatted. You tried to flash again... but did you unmount your system partition for second time?
2) What's the capacity of your internal storage?
3) Did you use internal or external storage? If external then I need the model and the file system that have been used on that storage.
Doom Slayer said:
Don't worry about your phone, the testpoint method will work for sure.
But in order to prevent this kind of situations ,we need to determine the reason how did it happen and you need to help me with that one by answering following questions:
1) You have mentioned that you had an error 1st time.
I also had error which was cache related, and it's OK because that partition was just formatted. You tried to flash again... but did you unmount your system partition for second time?
2) What's the capacity of your internal storage?
3) Did you use internal or external storage? If external then I need the model and the file system that have been used on that storage.
Click to expand...
Click to collapse
Hello,
I managed to recover the phone, I installed a fresh windows 7 on another PC with only MI Flash Beta installed, device appeared as "Qualcomm HS-USB QDLoader 9008" as usual and I flashed the china ROM. Not sure why it wouldn't start previously after flashing, maybe issue with drivers.
1) unfortunately I don;t remember the syntax of the error, it was after a few seconds of flashing but the process seemed interrupted, I even googled it but my browser history has been purged.
2) 64GB (Helium)
3)I used internal storage, copied the zip on the phone using MTP.
Might try to go through the process again this weekend.
agreusar said:
Hello,
I managed to recover the phone, I installed a fresh windows 7 on another PC with only MI Flash Beta installed, device appeared as "Qualcomm HS-USB QDLoader 9008" as usual and I flashed the china ROM. Not sure why it wouldn't start previously after flashing, maybe issue with drivers.
1) unfortunately I don;t remember the syntax of the error, it was after a few seconds of flashing but the process seemed interrupted, I even googled it but my browser history has been purged.
2) 64GB (Helium)
3)I used internal storage, copied the zip on the phone using MTP.
Might try to go through the process again this weekend.
Click to expand...
Click to collapse
Well, I guess system was mounted and it gived u the error,but formatted it.
hi to all of you. I am very interested by this thread. Here is the story. I received my brand new mi max helium this week but it was the chinese rom. I am in France and my country did not appear in the settings. So I wanted to flash a global rom. I plugged it to my pc in recovery mode and a window appeared said that there is an update. I clicked ok and after a while I got stuck in the mi logo bootloop.
Then from then I tried everything possible from several solutions here, but nothing worked. What I got is the mi logo without bootloop, but nothing more.
I get the message that the bootloader is locked, but I can't get it unlock if it is in this state.
What I can reach is the recovery mode and the fastboot mode. But nothing else worked, flash or anything.
That is why I am interested to flash a recovery, in order to flash a clean rom, etc..
I did what you, Doom Slayer, explains, but I could not get a twrp flash. It ends with "receiving hello packet" in mi flash, and every thing stopped.
If I cannnot install any recovery, I cannot flash a rom.
So please if you have any suggestion, it would be helpful. Thanks a lot.
alain belay said:
hi to all of you. I am very interested by this thread. Here is the story. I received my brand new mi max helium this week but it was the chinese rom. I am in France and my country did not appear in the settings. So I wanted to flash a global rom. I plugged it to my pc in recovery mode and a window appeared said that there is an update. I clicked ok and after a while I got stuck in the mi logo bootloop.
Then from then I tried everything possible from several solutions here, but nothing worked. What I got is the mi logo without bootloop, but nothing more.
I get the message that the bootloader is locked, but I can't get it unlock if it is in this state.
What I can reach is the recovery mode and the fastboot mode. But nothing else worked, flash or anything.
That is why I am interested to flash a recovery, in order to flash a clean rom, etc..
I did what you, Doom Slayer, explains, but I could not get a twrp flash. It ends with "receiving hello packet" in mi flash, and every thing stopped.
If I cannnot install any recovery, I cannot flash a rom.
So please if you have any suggestion, it would be helpful. Thanks a lot.
Click to expand...
Click to collapse
Did you disable drivers signature?
Also some people have a better luck on windows 7, u can try a virtual machine.
If you can enter EDL mode, then you should be fine.
Unless Chinese already disabled it in a new update.
I would blame drivers. Make sure u got them correctly.
Updated tutorial.
Uploaded TWRP for helium, so you don't need to edit updater script anymore, since script will get correct model.
Now you can try to get root on your current rom and unlock bootloader without Xiaomi's confirmation.
People having helium with unlocked bootloader may also have problems installing roms from xiaomi eu, if they have TWRP from hydrogen.
You may update using my recovery.img from archive using fastboot, or TWRP(will also work for locked bootloader).
Doom Slayer said:
Did you disable drivers signature?
Also some people have a better luck on windows 7, u can try a virtual machine.
If you can enter EDL mode, then you should be fine.
Unless Chinese already disabled it in a new update.
I would blame drivers. Make sure u got them correctly.
Click to expand...
Click to collapse
hi Doom. Thank you for reply. But what do you mean by " disable drivers signature". I did not do anything but install the drivers and when I am on what I think is EDL mode(screen isi black) the driver is recognized as Qualcomm HS-USB QDLoader 9008(COM20).
Anyway, I will give another try and let you know. Thank you again.
---------- Post added at 09:14 AM ---------- Previous post was at 08:22 AM ----------
I followed your guide and I could get the twrp installed. So I tried to install rom(following your link). It said rebooting in 5 seconds, and then nothing. The screen is black, no power anymore, no logo, no vibes, and no life at all.
I cannot get any more reaction from it. I plugged it to my pc, but nothing is connected. I was so happy with twrp working... Any idea?...
one more information I don't know if it can help, when I flashed first, I tried the "xiaomi.eu_multi_MIMAXPro_6.8.4_v8-6.0" and a message said "failed. This rom is for helium and this is hydrogen phone". Which is strange because mine is helium(4GB/128GB).
Then I tried with the "xiaomi.eu_multi_MIMAX_V7.5.6.0.MBCCNDE_v7-6.0" rom, and everything got ok, last message "success. The phone will reboot in 5 seconds", and from then, dead all over...
alain belay said:
one more information I don't know if it can help, when I flashed first, I tried the "xiaomi.eu_multi_MIMAXPro_6.8.4_v8-6.0" and a message said "failed. This rom is for helium and this is hydrogen phone". Which is strange because mine is helium(4GB/128GB).
Then I tried with the "xiaomi.eu_multi_MIMAX_V7.5.6.0.MBCCNDE_v7-6.0" rom, and everything got ok, last message "success. The phone will reboot in 5 seconds", and from then, dead all over...
Click to expand...
Click to collapse
Looks like you installed hydrogen TWRP and that caused all your problems.
I've been very careful to install the helium twrp from this thread...
(or is it hard brick)
Hi,
A2017G
Started with marshmallow,
Unlocked bootloader
attempted to install Slim7
seemed to work but with some possible errors, (wouldn't sync with google... retrospect I should have looked elsewhere before...)
attempted in install stock rom
using
ZTE_A2017GV1.2.0B04_BootStack_by_tron1.zip
ZTE_A2017GV1.2.0B04_Stock_System_by_tron1.zip
which wouldn't boot
So I tried reinstall Slim7
then stock again,
then, like the noob that I am, I removed twrp with
ZTE_A2017GV1.2.0B04_Full_Stock_Reverter_by_tron1.zip
which installs stock recovery
so, now I have a stock rom that won't boot,
an unlocked bootloader
and stock recovery
Not sure what to do from here
thanks in advance for any assistance.
I can abd sideload and update from SD card, but everything I have fails signature verification.
edit: so frustrating trying to find that 1 zip
Dizzee said:
(or is it hard brick)
Hi,
A2017G
Started with marshmallow,
Unlocked bootloader
attempted to install Slim7
seemed to work but with some possible errors, (wouldn't sync with google... retrospect I should have looked elsewhere before...)
attempted in install stock rom
using
ZTE_A2017GV1.2.0B04_BootStack_by_tron1.zip
ZTE_A2017GV1.2.0B04_Stock_System_by_tron1.zip
which wouldn't boot
So I tried reinstall Slim7
then stock again,
then, like the noob that I am, I removed twrp with
ZTE_A2017GV1.2.0B04_Full_Stock_Reverter_by_tron1.zip
which installs stock recovery
so, now I have a stock rom that won't boot,
an unlocked bootloader
and stock recovery
Not sure what to do from here
thanks in advance for any assistance.
Click to expand...
Click to collapse
Just use MiFlash, that one's guaranteed to work. Read my DFU unbrick guide to know how to use it. Just skip the part where you have to disassemble the phone, since you can get to EDL mode by (with the phone off and the USB cable connected to the PC) holding both volume buttons and inserting the USB-C cable to the phone.
I did read your guide, was, hoping to avoid dismantling it...
I tried pressing all 3 buttons.
Am I understanding the procedure correctly:
[phone switched off] + usb-C cable connected to PC only
MiFlash running at this point??
Hold both volume keys in and in insert Cable to Phone
at this point is the phone supposed to switch on?
At no point am I supposed to press the power button?
fyi: I will try different combinations, is great to have a solution, thank you.
Ah.... ok... so, the phone will display nothing, rely on the sound of PC and/or the device manager check and/or hit refresh on miflash
Fyi to anyone, if you have axon7toolkit installed and thus can't install a second version of MiFlash, open up the toolkit and hit 7 (unlock bootloader) to fire up MiFlash... or just go to C:\XiaoMi\XiaoMiFlash
the FULL_EDL file I have produces a couldn't find script Error when loading into MiFlash
so far when attempting to flash all zips
I have started MiFlash with admin
unzipped FULL_EDL file to a folder in root C:\ and ensured there are no spaces in address.
Every time / Every file produces couldn't find script error when loaded into MiFlash
when I attempt to flash the file it says cannot receive hello packet and then times out with an error
Tried disabling anti-virus/firewall, still same error
upgraded MiFlash to 2017.4.24.0 ( older 2016 is included with axon7toolkit), this removes the couldn't find script error, but still not receiving a hello packet, gunna fiddle with the phone as I'm pretty sure the error is coming from there
YES!
rebooted phone, turned off, restarted into EDL, flashed the stock rom from zte site... is in chinese... but it works. Thank you Thank you
so adventure over, after all that I am back to 6.0.1...
Dizzee said:
I did read your guide, was, hoping to avoid dismantling it...
I tried pressing all 3 buttons.
Am I understanding the procedure correctly:
[phone switched off] + usb-C cable connected to PC only
MiFlash running at this point??
Hold both volume keys in and in insert Cable to Phone
at this point is the phone supposed to switch on?
At no point am I supposed to press the power button?
fyi: I will try different combinations, is great to have a solution, thank you.
Ah.... ok... so, the phone will display nothing, rely on the sound of PC and/or the device manager check and/or hit refresh on miflash
Fyi to anyone, if you have axon7toolkit installed and thus can't install a second version of MiFlash, open up the toolkit and hit 7 (unlock bootloader) to fire up MiFlash... or just go to C:\XiaoMi\XiaoMiFlash
the FULL_EDL file I have produces a couldn't find script Error when loading into MiFlash
so far when attempting to flash all zips
I have started MiFlash with admin
unzipped FULL_EDL file to a folder in root C:\ and ensured there are no spaces in address.
Every time / Every file produces couldn't find script error when loaded into MiFlash
when I attempt to flash the file it says cannot receive hello packet and then times out with an error
Tried disabling anti-virus/firewall, still same error
upgraded MiFlash to 2017.4.24.0 ( older 2016 is included with axon7toolkit), this removes the couldn't find script error, but still not receiving a hello packet, gunna fiddle with the phone as I'm pretty sure the error is coming from there
YES!
rebooted phone, turned off, restarted into EDL, flashed the stock rom from zte site... is in chinese... but it works. Thank you Thank you
so adventure over, after all that I am back to 6.0.1...
Click to expand...
Click to collapse
What? It's in chinese?
Can you tell me the name of the file you used? Do you still have cell signal?
Choose an username... said:
What? It's in chinese?
Can you tell me the name of the file you used? Do you still have cell signal?
Click to expand...
Click to collapse
I got it from here: http://www.ztedevice.com/support
selected:- United Kingdom > Mobile Phone > Axon 7
it offers a file "AXON 7(ZTE A2017G) SD card software package(328540B2634ZTE A2017GV1.0.0B11)"
which hints at being compatible with A2017G... but is A2017V and is chinese, although you can change the language in settings there is still plenty here and there, plus chinese bloatware
and No, I didn't get cell signal.
I've gone back to Marshmellow, I will try again, didn't think it would be so different/difficult... Although wow at MiFlash.
FFS!!!! Relocked bootloader and bricked it!!! there should be a warning!
you gotta laugh,
I am a bit livid, I know the guides come with disclaimers, however, you'd think it would be an obvious important warning to make... DO NOT RELOCK YOUR PHONE.
FFS!
Dizzee said:
FFS!!!! Relocked bootloader and bricked it!!! there should be a warning!
you gotta laugh,
I am a bit livid, I know the guides come with disclaimers, however, you'd think it would be an obvious important warning to make... DO NOT RELOCK YOUR PHONE.
FFS!
Click to expand...
Click to collapse
Good lord...
You probably wiped out both IMEIs, now you relock out of the blue... Go to my DFU unbrick guide and stop doing dumb stuff :silly:
Choose an username... said:
Good lord...
You probably wiped out both IMEIs, now you relock out of the blue... Go to my DFU unbrick guide and stop doing dumb stuff :silly:
Click to expand...
Click to collapse
... after I finally got it working again (thanks for the assist), I thought relocking it was just making it secure again. I been rooting/unrooting and swapping out roms since the galaxy s2, who'd think you can't unlock and relock... I do think there should be warnings as it is too easy a mistake to make... lmao stop doing dumb stuff you start first
My phone is insured so I'm not overly fussed, but others will be less fortunate.
hello everywone...i have a troble to...my phone is A2017GV1.2.0B04 like this in post.
I bay this phone whit broken screen, i change the screen and try sim card but the phone is locked Whit google account... When I try my sim to test microphone, the phone it's work OK, but I unlock google account whit add tools and after that my phone don't have a service.
Phone tells no service or turned off airplane mode...what is not true... I can change the 4g/3g/2g connection to only 3g or something else... Wi-Fi and everything else work great but no service... The phone see what operator is on sim but no service... Somebody to help me please and tell me some tutorials how to fix?
I by this phone from Denmark and now I'm in Serbia... Eny help please
Thanks anyway Dragan
---------- Post added at 08:30 PM ---------- Previous post was at 08:27 PM ----------
Mistake,whit adb tools...
Hi to all.
I landed on XDA because I am not able to hack my Asus Zenfone Laser 2 dual-sim (ZE550KL, which seems to be also called as Z00L or Z00LD... I don't know why... ?!? ). Actually I'm very new on smartphone hacking, so I did my best recently to understand what "rooting", "recovery", "brick" etc mean.
I tried to enter this world because my phone gets gradually very slow as I use it and so I supposed that erasing the pre-installed applications and overclocking it would help, possibly installing a lighter and more performing custom rom. In order to do this I read that in short I have to unlock the boot loader, root the phone and then eventually install a custom rom. In fact I suppose that getting root privileges should already do the job by keeping the original rom, unistall all unwanted apps and eventually overclocking it. Is that correct?
However, the problems I found on my way are the following two:
I've not been able to follow those procedures on Linux. In detail, I'm not able to use "fastboot boot" instruction because it gets stuck on "waiting for any device". The device is listed and allowed when running "adb devices", the boot had been unlocked previously, the phone is in debug mode etc... but the problem is still there despite I've been trying with both the adb package included in the repositries and the one downloaded from the related google page. I've been told it may be a matter of USB drivers, so I also installed the android studio package thinking it would help, but I was wrong. I'm quite confused on this, despite I do hope I can hack my phone using my favourite operating system (I'm a Linux user since 2006). If you do not feel like helping on this then I will try on Windows.
After trying the same procedures on Windows 10, I realised that the Android Usb drivers released by Google did not work. I had to install the proprietary ASUS USB Drivers from the official website and only then I was able to overcome on Windows the same "waiting for any device" I had experienced on Linux. However, the phone "bricks". I suppose this should be the technical term used in this field to tell that the phone gets stuck for hours on the boot animation. I tried several times to reboot it, but each time the same story.
Maybe the problem on Linux is that I do not have the proper Android Device Usb drivers installed. In this case, how to solve the problem taking into account that ASUS only released the drivers for Windows?
RECAP: I have my phone bricked now (Android is unable to reboot, but I can do access both to the Power+VolumeUP menu (by the way, what's the name of this menu? Fast boot?) and the Power+VolumeDOWN menu (by the way, what's the name of this menu? Recovery boot?)
So sorry for the long story.
Hope you can help.
Thanks for your attention and best regards.
Uhm... no replies till now?
i dont know how you get this kind of trouble, maybe try other computer? , im using wondows 10, download small package of of fastboot driver and adb driver, flash twrp using fastboot command. all done. then i make full backup using twrp, next flash magisk .now i have root access, any problem or bootloop i just restore the full backup that work.
---------- Post added at 04:53 PM ---------- Previous post was at 04:22 PM ----------
i see a lot of this zen2 laser got bricked on this general forum , you should read some more if that could help
When I had this device, I remember booting a temporary recovery TWRP and rooted it in that recovery. Then once I got rooted, I installed TWRP app and installed a permanent recovery from within the TWRP app, which needed root of course. Then I got everything working.
You can try booting on a temporary TWRP using fastboot then flash supersu or magisk or whatever rooting client you want. Though, I think you need an unlocked bootloader. I'm sure there's a guide around here somewhere
I'm using a Z00T and just installed LineageOS yesterday using Windows 10, following a guide by Android Authority and LineageOS.
Volume Up + Power = Fastboot
Volume Down + Power = Recovery
Sounds like you can get into Fastboot, so I'm wondering if maybe you can use it to flash the recovery image??? (I'm not a dev in any form; try this at own risk)
I'm assuming you unlocked the bootloader already...
In the directory where all your images are, perhaps try flashing the recovery with the following, where RECOVERY.img is whatever you may have renamed the TWRP image to be:
Code:
fastboot flash recovery RECOVERY.img
After it's finished flashing, turn off the phone, then reboot into recovery mode with Volume Down + Power.
Something Similar happened with my phone and looking for answer
Hi All,
I'm new to this but do some hands on reading these forums. Recently i don't know how but my phone continuously boot into Fast-Boot mode. If I try to push some zip file as mentioned i'm getting error related to partition. "failed to write partition."
Can someone help me out with this.
Thank in advance.
CerealKiIIel said:
Hi to all.
I landed on XDA because I am not able to hack my Asus Zenfone Laser 2 dual-sim (ZE550KL, which seems to be also called as Z00L or Z00LD... I don't know why... ?!? ). Actually I'm very new on smartphone hacking, so I did my best recently to understand what "rooting", "recovery", "brick" etc mean.
I tried to enter this world because my phone gets gradually very slow as I use it and so I supposed that erasing the pre-installed applications and overclocking it would help, possibly installing a lighter and more performing custom rom. In order to do this I read that in short I have to unlock the boot loader, root the phone and then eventually install a custom rom. In fact I suppose that getting root privileges should already do the job by keeping the original rom, unistall all unwanted apps and eventually overclocking it. Is that correct?
However, the problems I found on my way are the following two:
I've not been able to follow those procedures on Linux. In detail, I'm not able to use "fastboot boot" instruction because it gets stuck on "waiting for any device". The device is listed and allowed when running "adb devices", the boot had been unlocked previously, the phone is in debug mode etc... but the problem is still there despite I've been trying with both the adb package included in the repositries and the one downloaded from the related google page. I've been told it may be a matter of USB drivers, so I also installed the android studio package thinking it would help, but I was wrong. I'm quite confused on this, despite I do hope I can hack my phone using my favourite operating system (I'm a Linux user since 2006). If you do not feel like helping on this then I will try on Windows.
After trying the same procedures on Windows 10, I realised that the Android Usb drivers released by Google did not work. I had to install the proprietary ASUS USB Drivers from the official website and only then I was able to overcome on Windows the same "waiting for any device" I had experienced on Linux. However, the phone "bricks". I suppose this should be the technical term used in this field to tell that the phone gets stuck for hours on the boot animation. I tried several times to reboot it, but each time the same story.
Maybe the problem on Linux is that I do not have the proper Android Device Usb drivers installed. In this case, how to solve the problem taking into account that ASUS only released the drivers for Windows?
RECAP: I have my phone bricked now (Android is unable to reboot, but I can do access both to the Power+VolumeUP menu (by the way, what's the name of this menu? Fast boot?) and the Power+VolumeDOWN menu (by the way, what's the name of this menu? Recovery boot?)
So sorry for the long story.
Hope you can help.
Thanks for your attention and best regards.
Click to expand...
Click to collapse
hey I have the same issue im on windows 10 and asus hasn't realeased drivers for asus zenfone laser connectivity so It wont show up no matter what I do, and the windows 7 drivers cant be used.
BlondebigboobsIRL said:
hey I have the same issue im on windows 10 and asus hasn't realeased drivers for asus zenfone laser connectivity so It wont show up no matter what I do, and the windows 7 drivers cant be used.
Click to expand...
Click to collapse
I'm using Z00T and Windows 10. Had no issues using the Android Authority and LineageOS guides.
These guides are great but I don't want to lose my data by formatting my bootlooping device, and the drivers asus gives do not work with windows 10, the adb drivers work fine but the asus drivers do not.
Good evening! I hope you can help me.
I flashed LineageOS 14.1, but I wanted to go back to EMUI. I made all the wipes and tried to flash different stock firmwares through a forced update (volume buttons + power button), but it never worked. At that point, I read about a guy in this forum who suggested to create a flashable zip with Huawei Update Extractor: I followed the suggestion and tried to flash it with TWRP. No error was given, but when I tried to restart, TWRP told me I had no OS installed. I thought it was strange, so I tried to restart anyway. That's when I got in rescue mode. I can't get into the recovery and I can't use fastboot. What rescue mode shows me is:
RESCUE MODE
Attention!
Please update system again
Update User Guide:
*link*
*android avatar*
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
Pressing the three buttons, I'm able to force an update. The problem is I can't find a firmware that doesn't get rejected. With Lollipop firmwares, it starts to install, but it fails at 12%. With Marshmallow ones, the installation process doesn't even start.
What can I do to make it work again? I'm very sad because this phone was gifted to me a couple of days ago and I already messed it up. I don't even know how to turn it off.
What can I do to get in fastboot mode? At that point, what should I do to flash the stock firmware? Or maybe do I need to find the first stock firmware ever installed into this phone to make the forced update work?
Please, I need help. Thank you in advance!
P.S. The phone's model is ALE-L21. I live in Italy, so I assume it's a European version.
Did you managed to fix this?
Jhon_Locke said:
Did you managed to fix this?
Click to expand...
Click to collapse
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
ErikChimello said:
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
Click to expand...
Click to collapse
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Jhon_Locke said:
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Click to expand...
Click to collapse
No, it doesn't show anything if I write that command...
I guess mine won't ever boot into the rom because it seems like there's no system installed. I made some researches and found out there are some softwares that let you reflash the partitions IF the phone is recognized as "HUAWEI USB COM 1.0". I'm still trying to figure out how to do it correctly though. I feel like if I do something wrong, then my phone won't probably turn on again.
In your case, you should be able to flash a custom rom without any issue. You just have to be very careful and inform you as much as you can: I don't want your phone to end up like mine?. Anyway, it seems pretty hard to go back to the stock rom, so think about it before you flash a custom rom. Also, make a Nandroid Backup is very important.