Here is a first build of cm13 for the zuk z2 pro. Grabbed it at zuk forum. No credits in it at all.
https://d21db4.lt.yunpan.cn/lk/cBCEzUqCIpDvY
Password: 3cb9
Mega Link
https://mega.nz/#!BwwGTLja!_bALdqa6vyjGgoZ8xEXmu47k8OKLYg0gZwp2UcOK1Ms
oook its a good start
Was anyone able to flash it and could give a quick overview, how good it works?
Edit:
Oh, and also there was already an update release, but unfortunately the file is down at the moment.
Link to the thread: http://bbs.zuk.cn/z2pro/t122238/?ordertype=1 (use Google Translate)
Update
The second edition follows repair
+ Invalid repair light
+ Repair GPS
+ The latest update to the underlying file
+ Correction Bluetooth
I flashed another ROM posted on the BBS.
http://bbs.zuk.cn/z2pro/t122452/
Seems good.
whyes said:
I flashed another ROM posted on the BBS.
http://bbs.zuk.cn/z2pro/t122452/
Seems good.
Click to expand...
Click to collapse
Do you think, everythink is working like sensors, mobile data,gps?
Lenovo Zuk Z2 Pro
dtosun said:
Do you think, everythink is working like sensors, mobile data,gps?
Lenovo Zuk Z2 Pro
Click to expand...
Click to collapse
I have not experience this ROM fully. Flashed it 15 min ago
whyes said:
I have not experience this ROM fully. Flashed it 15 min ago
Click to expand...
Click to collapse
[emoji1] [emoji6]
Lenovo Zuk Z2 Pro
whyes said:
I have not experience this ROM fully. Flashed it 15 min ago
Click to expand...
Click to collapse
Would be great, if you could tell us more about your experience in the future!
Edit:
If I understood it correctly from the Chinese thread, vibration is not working. Is this correct?
whyes said:
I flashed another ROM posted on the BBS.
http://bbs.zuk.cn/z2pro/t122452/
Seems good.
Click to expand...
Click to collapse
How did you install it?
When i try via TWRP, there is an error.
"Systen partition has unexpected contents after OTA update"
dtosun said:
How did you install it?
When i try via TWRP, there is an error.
"Systen partition has unexpected contents after OTA update"
Click to expand...
Click to collapse
Can you read Chinese?
I follow these steps:
1. unlock http://bbs.zuk.cn/z2pro/t116264/
2. install twrp http://bbs.zuk.cn/z1/t112661/
3. install the Remix ROM which is based on CM13 http://bbs.zuk.cn/z1/t112661/
4. install Gapps (Banks Dynamic G-apps) in this thread http://forum.xda-developers.com/nexus-6p/development/rom-6-0-1-official-ownrom-v3-0-t3357338
done.
---------- Post added at 09:27 PM ---------- Previous post was at 09:22 PM ----------
Tek5 said:
Would be great, if you could tell us more about your experience in the future!
Edit:
If I understood it correctly from the Chinese thread, vibration is not working. Is this correct?
Click to expand...
Click to collapse
Yes.
I've experienced this the Remix ROM for 2 hr and found that only the vibrate did not work.
whyes said:
Can you read Chinese?
I follow these steps:
1. unlock http://bbs.zuk.cn/z2pro/t116264/
2. install twrp http://bbs.zuk.cn/z1/t112661/
3. install the Remix ROM which is based on CM13 http://bbs.zuk.cn/z1/t112661/
4. install Gapps (Banks Dynamic G-apps) in this thread http://forum.xda-developers.com/nexus-6p/development/rom-6-0-1-official-ownrom-v3-0-t3357338
done.
Click to expand...
Click to collapse
Yes, i did all. But my rom is rooted. May be this is the problem
dtosun said:
Yes, i did all. But my rom is rooted. May be this is the problem
Click to expand...
Click to collapse
Maybe you should flash the Stock ROM first.
Thread moved out of the Android Development as it is not a original work of the Owner/OP
Thanks for the understanding
whyes said:
Maybe you should flash the Stock ROM first.
Click to expand...
Click to collapse
Was your ZUI rooted, when you flashed CM?
Which ZUI version had you installed?
Would be great if you could tell us, because maybe this solves the problem!
Tek5 said:
Was your ZUI rooted, when you flashed CM?
Which ZUI version had you installed?
Would be great if you could tell us, because maybe this solves the problem!
Click to expand...
Click to collapse
My ZUI is rooted. I have latest ZUI Rom, Which is 2.0.48 st.
I think the problem is TWRP. I try everything but no result.
Lenovo Zuk Z2 Pro
dtosun said:
My ZUI is rooted. I have latest ZUI Rom, Which is 2.0.48 st.
I think the problem is TWRP. I try everything but no result.
Lenovo Zuk Z2 Pro
Click to expand...
Click to collapse
A user posted (Link to the post) this TWRP in the zukfans forum: http://pan.baidu.com/s/1o7YmoSa (PW: 9967)
I don‘t know if it helps and what it does, but when you have the feeling that it has something to do with your TWRP, maybe this helps!
Tek5 said:
Was your ZUI rooted, when you flashed CM?
Which ZUI version had you installed?
Would be great if you could tell us, because maybe this solves the problem!
Click to expand...
Click to collapse
Before I unlock the phone, the ZUI ROM was not rooted.
CM-13.0 http://bbs.zuk.cn/z2pro/t122238/
Remix http://bbs.zuk.cn/z2pro/t122452/
Mokee http://bbs.zuk.cn/z2pro/t122616/
All for Z2 Pro
---------- Post added at 09:53 AM ---------- Previous post was at 09:45 AM ----------
Work module:
Camera
WiFi
touch screen
display
sound
sensor
Base band
dual card
fingerprint
flashlight
charge when shutdown
SELinux
doze
Automatic brightness
LED
GPS
Do not work:
Vibration
whyes said:
Before I unlock the phone, the ZUI ROM was not rooted.
Click to expand...
Click to collapse
Thank you!
Which ZUI version did you use? ZUI 1.9 or 2.0?
Related
Hi folks,
It seems that a dev from the Oneplus forum, PMehra, managed to get OOS 3.1.0 working on our beloved OPO
He also made a OPX H2OS v2 port, though the official one is out.
Actually there are two OOS 3 ports that was made by two different dev (the other one is on Oneplus chinese forum) at the same time (almost) !
These are ports from the OPX 3.1.0 update dated of 08/18.
I've only tested the PMehra OOS 3 port.
What's working :
Almost everything is working, including NFC
Known bugs :
Mobile network take little bit more time (actually, it's insignificant), switch flight mode on & off after boot. Expected to improve in next update.
Longpress actions doesn't work on any button. Expected to be fixed in next update.
When the software buttons are turned on, the hardware buttons stay active and can also be used. So stay with HW buttons for now.
You can't change priority/no notifications due to there being no alert slider.
Download app fc
Storage->explore->doesnt do anything
Storage->other-> settings fcs
Changelogs :
Soon
How to flash :
Reboot to recovery
Make a nandroid backup
Wipe cache/dalvik/data/system partitions
Flash the zip
Reboot and enjoy !
If you want to install another rom after this one, you have to flash a marshmallow modem from this thread before, or you'll be stuck at boot logo.
Gapps are included into the rom.
Downloads :
Mega folder with full rom and OTA.
Full rom on Google drive.
Don't worry if winrar say that the .zip is corrupt, it work anyway.
Root :
Flash these two .zip in this order :
Magisk V6
Magisk Super Su 2.76
Custom Kernels :
You can use a H2OS or OPX kernel on this rom, though no OPX kernel has been updated to OOS 3 yet because Oneplus didn't release any sources, as the original update isn't official, but just a community build.
Quick review :
Use it for few hours now, and everything work well, it's smooth like butter
The camera app is the stock OOSone, and it don't support 4K recording, but the manual mode work well, and the "HQ" mode delivers nice shots.
Battery is good : about 4-5 hours SOT on average.
There is no slow charging issue.
Here a video of the installation and quick review of the rom thanks to @acervenky :
Source & Credits :
Oneplus topic OOS 3.x
Big thanks to @pradeepsmehra who made the port, thanks to him :good:
Big thanks to @Dhairya for testing and bug fixing :good:
Thanks also to all the testers :good:
thank u m8! will try it
icyeye said:
thank u m8! will try it
Click to expand...
Click to collapse
No problem a feedback would be great , and can you test the zip with winrar ? cause it say me that the .zip is corrupt, while it work in twrp.
could port camera for cm13 functional 100% ??????
gazorby said:
No problem a feedback would be great , and can you test the zip with winrar ? cause it say me that the .zip is corrupt, while it work in twrp.
Click to expand...
Click to collapse
It also says to me that is corrupt.
Flashed the rom without problem and its working perfect!
fedesandor said:
It also says to me that is corrupt.
Flashed the rom without problem and its working perfect!
Click to expand...
Click to collapse
Ok, thank you, i'll add it in the first post
I havent flashed the ROM but it says 3.0.1 in both Mega and GDrive but Screenshots say 3.1.0. Can you confirm what version is it??
btw, after trying to flash any other ROM, or restore backup...after this one... i can't do it any more. i am stuck at opo logo. any solution or idea why is it like that?
SaurabhMumbaiOneS said:
I havent flashed the ROM but it says 3.0.1 in both Mega and GDrive but Screenshots say 3.1.0. Can you confirm what version is it??
Click to expand...
Click to collapse
It's 3.1.0
icyeye said:
btw, after trying to flash any other ROM, or restore backup...after this one... i can't do it any more. i am stuck at opo logo. any solution or idea why is it like that?
Click to expand...
Click to collapse
Maybe it's the modem. Try flashing a mm modem from this thread before flashing your rom. Tell me if it works.
gazorby said:
Maybe it's the modem. Try flashing a mm modem from this thread before flashing your rom. Tell me if it works.
Click to expand...
Click to collapse
yup... it was modem. ty
icyeye said:
yup... it was modem. ty
Click to expand...
Click to collapse
Will add it in the first post too
Well a lot of you might accuse me of living in a cave but will still go ahead and ask my question
Apart from the camera quality what are the other benefits of using this ROM over say a cm or other stock roms? I am currently on hydrogen ROM purely for the sake of trying a new look.
dev.meena said:
Well a lot of you might accuse me of living in a cave but will still go ahead and ask my question
Apart from the camera quality what are the other benefits of using this ROM over say a cm or other stock roms? I am currently on hydrogen ROM purely for the sake of trying a new look.
Click to expand...
Click to collapse
i Flashed the rom yesterday. so far everything seems to be fine. i will report about the battery. no significant drain in last 12 hours!
---------- Post added at 06:56 AM ---------- Previous post was at 06:51 AM ----------
gazorby said:
Hi folks,
It seems that a dev from the Oneplus forum, PMehra, managed to get OOS 3.1.0 working on our beloved OPO
He also made a OPX H2OS v2 port, though the official one is out.
Click to expand...
Click to collapse
Could you please share the link for official H2OS?
igni.selvaraj said:
i Flashed the rom yesterday. so far everything seems to be fine. i will report about the battery. no significant drain in last 12 hours!
---------- Post added at 06:56 AM ---------- Previous post was at 06:51 AM ----------
Could you please share the link for official H2OS?
Click to expand...
Click to collapse
Direct download link
gazorby said:
Direct download link
Click to expand...
Click to collapse
Thank you!
Hardware buttons buggy
There's a few bugs with the hardware buttons that I've come across. Firstly being that no long press/double tap gestures work, and secondly when the software buttons are turned on the hardware buttons stay active and can also be used. While they're only minor bugs, they can be a bit annoying to deal with
---------- Post added at 01:26 PM ---------- Previous post was at 01:17 PM ----------
Also, another bug is that you can't change priority/no notifications due to there being no alert slider. Will edit this post if I find any other bugs.
derekokelly said:
There's a few bugs with the hardware buttons that I've come across. Firstly being that no long press/double tap gestures work, and secondly when the software buttons are turned on the hardware buttons stay active and can also be used. While they're only minor bugs, they can be a bit annoying to deal with
---------- Post added at 01:26 PM ---------- Previous post was at 01:17 PM ----------
Also, another bug is that you can't change priority/no notifications due to there being no alert slider. Will edit this post if I find any other bugs.
Click to expand...
Click to collapse
Thanks for bug report, will ad it in OP
Hi, which firmware should I flash to install cyanogenmod 13 or 14? Thanks in advance
Have you tried a different camera app than the stock one to try record 4k? For example: Bacon Camera, ColorOS Camera.
Looks Like OxygenOS 3.1.1 is Rolling out for the OnePlus X :victory:
What's new:
Added ability to move apps to SD card
Improved touch responsiveness, speed, and accuracy
Improved HFR setting in video capture
Implemented September Android security patches
General bug fixes
OnePlus X OxygenOS 3.1.1 Community Build2016-09-06
Official Link (DOWN)
http://downloads.oneplus.net/oneplus-x/oneplus_x_oxygenos_3.1.1_community_build/
OnePlus has Nuked the Download link as Reason that there is a Chance to Brick your Device.
http://s3.amazonaws.com/oxygenos.on...OTA_016_all_201609061919_f30a2930303341a7.zip
Link thanks to: arunmohan16
Type on Google:
OnePlus X OxygenOS 3.1.1 Community Build | Downloads - OnePlus.net
if you not Trust me.
I was able to Download it some Minutes ago!
I do not have a Clue why its not working now.
What's new:
Added ability to move apps to SD card
Improved touch responsiveness, speed, and accuracy
Improved HFR setting in video capture
Implemented September Android security patches
General bug fixes
http://s3.amazonaws.com/oxygenos.oneplus.net/OnePlusXOxygen_14_OTA_016_all_201609061919_f30a2930303341a7.zip Download link. Since oneplus has nuked the link to the rom, it may contain serious bugs which may brick your device.
arunmohan16 said:
http://s3.amazonaws.com/oxygenos.oneplus.net/OnePlusXOxygen_14_OTA_016_all_201609061919_f30a2930303341a7.zip Download link. Since oneplus has nuked the link to the rom, it may contain serious bugs which may brick your device.
Click to expand...
Click to collapse
Just tried it and works perfectly fine..really cant make out the difference between the previous release and this though
doomwithdon said:
Just tried it and works perfectly fine..really cant make out the difference between the previous release and this though
Click to expand...
Click to collapse
Charging is still slow? Can you check it please?
Can we flash it through TWRP and still retain the custom recovery?
Sachin7843 said:
Can we flash it through TWRP and still retain the custom recovery?
Click to expand...
Click to collapse
That's the important question. I want to also know :good:
vasu1312 said:
That's the important question. I want to also know :good:
Click to expand...
Click to collapse
I don't know work around for when the device gets bricked and OPX is also my daily driver so I cant try it.. Hope a developer finds a way to get TWRP working for this build
Still no mention on VoLTE?
flashed 3.1.1 (from 3.1.0) build with twrp and everything is ok for now... Twrp still works and no brick device (maybe it will brick later )
how is the high frame rate in video working out?
TWRP?
somin.n said:
flashed 3.1.1 (from 3.1.0) build with twrp and everything is ok for now... Twrp still works and no brick device (maybe it will brick later )
Click to expand...
Click to collapse
which TWRP ? bluespark or official TWRP?
Link?
Sent from my ONE E1005 using XDA-Developers mobile app
Hehe you fool read first page
viruz1225 said:
Link?
Sent from my ONE E1005 using XDA-Developers mobile app
Click to expand...
Click to collapse
BTW here it is http://s3.amazonaws.com/oxygenos.one...30303341a7.zip
---------- Post added at 10:36 PM ---------- Previous post was at 10:34 PM ----------
viruz1225 said:
Link?
Sent from my ONE E1005 using XDA-Developers mobile app
Click to expand...
Click to collapse
bro search little bit
---------- Post added at 10:37 PM ---------- Previous post was at 10:36 PM ----------
just flashed oos 3.1.1 and gestures is not working for me and voLTE support is still missing
What's about the root? I've updated it but I lost the root. I got it again with Kingroot but I cannot replace it with SuperSU (as I made it with last version) and I can't make xposed work...
Enviado desde mi ONE E1003 mediante Tapatalk
Use supersu me to replace king root with su.
Omicron Technics
somin.n said:
flashed 3.1.1 (from 3.1.0) build with twrp and everything is ok for now... Twrp still works and no brick device (maybe it will brick later )
Click to expand...
Click to collapse
Flashed Super Su?
Root and Xposed both working . Gestures working and everything else . Not sure what has changed yet.
vasu1312 said:
which TWRP ? bluespark or official TWRP?
Click to expand...
Click to collapse
of course the one from eng.stk
prarun2030 said:
Flashed Super Su?
Click to expand...
Click to collapse
yes, but have to use Modified SuperSU v2.78 TWRP flashable zip from this thread
Risolved problem with Google duo?
Audio out broken
Inviato dal mio ONE E1003 utilizzando Tapatalk
Hey guys, I just want to share another AOSP ROM that I found; Its a russian ROM, and the most stable a usable one I have tested.
*Compatible with xposed
*Menu button already set to show recent apps
*No GAPPS included (I flashed Open GAPPS pico and worked perfectly)
*Google camera working acceptably (not as fast as MIUI but better camera quality and stability than other ROMs)
*WiFi working at full speed (some AOSP ROMs appear to have a laggy wifi
*Bluetooth working fine (I'm using a MIband2 all the time with no problems)
*Multilanguage
Note: I flashed gapps right after the rom, the first start its a bit longer that the other roms (8 minutes in my case) after entering gaccount it delay a bit to confirm the account information, but after that works perfectly; you may install google web view system afterwards directly from the playstore.
Note 2: It appear to be a 3.4 version for this rom, but the links are down and probably wont work again.
Note 3: I'm just informing about this ROM cause I haven't read of it in this forum, I'm not the developer so, I'm not resposible of any problem you've got.
Original thread: https://4pda.ru/forum/index.php?showtopic=783613&st=400#entry57704575
ROM download link: https://drive.google.com/drive/folders/0B-qqAX5mnU7PX3V5QVVSTkJ3UzA
No 3.4 are online you must log in into the forum ... You download from 4pda servers...
Regards ... Yes nice rom thanks
yasars said:
No 3.4 are online you must log in into the forum ... You download from 4pda servers...
Regards ... Yes nice rom thanks
Click to expand...
Click to collapse
Thanks for that!
Need to install the patch zip file simountaneously?
hard to register since all is in russian during the account creation proccess/captcha etc (no translation support )
can anyone post a link or mirror on the 3.4? just seen that its an update of 40mb
can anyone be so kind?
I found this:
http://www88.zippyshare.com/v/dQMSHVDf/file.html
Update 3.4 is only 40mb big...
cinotec said:
Need to install the patch zip file simountaneously?
Click to expand...
Click to collapse
I didn't install it.
Bug battery ...since noon the device is charging and is still in 78%
Enviado de meu Redmi Note 4 usando Tapatalk
azeredo21 said:
Bug battery ...since noon the device is charging and is still in 78%
Enviado de meu Redmi Note 4 usando Tapatalk
Click to expand...
Click to collapse
That's strange, the charging and battery performance are fine for me.
thanks for posting man!
Is Magisk support?
goonoth said:
Is Magisk support?
Click to expand...
Click to collapse
It's pre-rooted with SU.
is cofface based?
after installing the update 3.4 zip, phone is stuck in MI logo
it works normally with me didnt face any trouble.
flashed through twrp 3.1.1.1 > aosp 3.3 > patch > 3.4
SalPhobos said:
It's pre-rooted with SU.
Click to expand...
Click to collapse
I wonder if I can use safetynet pass with this ROM, that is why I ask if it is support Magisk or not
on other aosp roms, my data sometimes show (!) marks, indicates the data is down, and I need to turn it off or activate airplane mode then turn it back on to make the data works (hoanguye and project x aosp rom). it never happen on global stable.
got any similiar issues?
ps: I know I should better try this myself, but it is not hurt to ask
thanas said:
it works normally with me didnt face any trouble.
flashed through twrp 3.1.1.1 > aosp 3.3 > patch > 3.4
Click to expand...
Click to collapse
Hey, where did you get TWRP 3.1.1.1 ?
---------- Post added at 01:09 AM ---------- Previous post was at 01:03 AM ----------
yasars said:
No 3.4 are online you must log in into the forum ... You download from 4pda servers...
Regards ... Yes nice rom thanks
Click to expand...
Click to collapse
Can i borrow your account ? I can't register because i can't complete the capcha thing
Nguyễn Thế Vinh said:
Hey, where did you get TWRP 3.1.1.1 ?
---------- Post added at 01:09 AM ---------- Previous post was at 01:03 AM ----------
Can i borrow your account ? I can't register because i can't complete the capcha thing
Click to expand...
Click to collapse
if u look for 3.4
are u the creator of modded aosp? recently I found about the data problem, sometimes it gives (!) note and have to turn it off and on again to bring it back to normal (wifi too), can u fix it please, I do really love ur rom, with nova xposed gravitybox fstb, its awesome
yasars said:
I found this:
http://www88.zippyshare.com/v/dQMSHVDf/file.html
Update 3.4 is only 40mb big...
Click to expand...
Click to collapse
rouenmod said:
if u look for 3.4
are u the creator of modded aosp? recently I found about the data problem, sometimes it gives (!) note and have to turn it off and on again to bring it back to normal (wifi too), can u fix it please, I do really love ur rom, with nova xposed gravitybox fstb, its awesome
Click to expand...
Click to collapse
Wat ?
No I'm not
I'm just a normal user
You may confused me with other Vietnamese guy
Hey Zukians, I found something great on ZukFans website.
This is OnePlus ROM for Zuk Z2 Plus
Here's the link- https://drive.google.com/file/d/0B8WVRE_H4XywQnBINEJuQ0tDZTQ/view
VoLTE is working
Camera
WiFi, Hotspot, Bluetooth Working
To Let VoLTE work.
Go to settings>Cellular Network>Jio>APN>Click on the plus icon on top> Name- ims, APN-ims, APN type-ims.... Your VoLTE is ready click on the three dots on top corner and then save.
This ROM is Awesome I tried it myself. It's liquid smooth and the battery and gaming performance is top of the mark.
Screenshots attached
You have to flash the open gapps 6.0.1 arm64 version(I use nano)
GAPPS Link- http://opengapps.org/
Flash the ROM and enjoy!!!!
what version oxygen os is that. Because it have several versions online for the zuk z2
toussaintjames said:
what version oxygen os is that. Because it have several versions online for the zuk z2
Click to expand...
Click to collapse
It says in the headline 6.0.1
how to flash it ..i m on android 7 based rom will flashing this cause harbrick ?
shashankj150 said:
how to flash it ..i m on android 7 based rom will flashing this cause harbrick ?
Click to expand...
Click to collapse
Make a backup of system and data first then wipe system,data, cache and dalvik cache and you can flash this rom with 6.0 gapps. Any upgrade or downgrade to android vesion needs you to wipe system and data.
---------- Post added at 17:48 ---------- Previous post was at 17:44 ----------
Zukker said:
VoLTE is working
Camera
WiFi, Hotspot, Bluetooth Working
Click to expand...
Click to collapse
GPS working?
It has video recording bug.
It has that black theme bug
Volte is working
Ritik17 said:
It says in the headline 6.0.1
Click to expand...
Click to collapse
u don't think if it said that before i wouldnt of asked? it never said that never i was one of the few who saw this thread first
shashankj150 said:
how to flash it ..i m on android 7 based rom will flashing this cause harbrick ?
Click to expand...
Click to collapse
Just go to TWRP
-Backup
-Wipe->Data, Cache, System, Dalvik..
-Go to install and flash the rom and gapps(6.0 ARM64)
-Reboot System
_DONE!!!
abhay009 said:
Volte is working
Click to expand...
Click to collapse
Yes
Zukker said:
Yes
Click to expand...
Click to collapse
what the security patch of this version and what battery life u getting sot????
Ritik17 said:
It says in the headline 6.0.1
Click to expand...
Click to collapse
Is it android version 6.0 ie marshmallow?
Kartiksoni04 said:
Is it android version 6.0 ie marshmallow?
Click to expand...
Click to collapse
Really dude? Nice joke, it's Android Cupcake
No need to root the phone ah??
Can we flash custom Roms without rooting the phone?
shashankj150 said:
how to flash it ..i m on android 7 based rom will flashing this cause harbrick ?
Click to expand...
Click to collapse
Enter on FlymeEU topic and search a file named downgrade7-6 or something like that. Flash it before flashing any mm rom when u are on N
Sent from my Z2 Plus using Tapatalk
Stock based?
Enviado de meu Z2 Plus usando Tapatalk
Can i use this rom as daily driver ?
Dont flash this rom...it degrade ur baseband version....that to again go to naugat u have to flash a latest baseband
And there is no utouch function in this rom...only taping go to recent.....i try to change fpc file but nothing happens....
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
I want to port oxygen os naugat and oreo...
If someone know anything about porting..then u can also help me
Link is not working
Download link is not working.
Download Link Please!!!
This thread is closed due to violation of protocol
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Steps to install?
I've tried installing with pixel experience (treble), gave me a bootloop.
cichowlasp said:
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Click to expand...
Click to collapse
Is it has any bugs??? Specifically volte working???
Pavan420 said:
Is it has any bugs??? Specifically volte working???
Click to expand...
Click to collapse
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
cichowlasp said:
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
In India, I used Jio SIM and it works sometime perfectly and sometime it just show incoming calls but when you picked up call the call gets cancelled, and you cannot used Volte for outgoing calls normal calls can be made and jio4g app from playstore doesnt work because it recognize your phone as volte enabled
vvijayk1999 said:
ANDROID P DEVELOPER PREVIEW
Dear friends,
Since the unofficial Android P Dev preview ROM has been developed I'm posting the links below.
Note:
its a preview build, So high chances of instability.
I'm not responsible for any damage caused.
And its not a daily driver.
Steps to install:
Click to expand...
Click to collapse
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
andromuks said:
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
Click to expand...
Click to collapse
Bro use rr 6.1.0 treble
Way to early for some one with sigle Z2 Plus as primary phone to try out.
I shall wait till more of a device specific build is made available !!
I get an error error7 when installing incall2.zip. Do everyone alike?
EldarWap said:
I get an error error7 when installing incall2.zip. Do everyone alike?
Click to expand...
Click to collapse
Mount system and vendor
Noverity zip link?
guyz_ahead said:
Noverity zip link?
Click to expand...
Click to collapse
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
JashanjotSidhu said:
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
Click to expand...
Click to collapse
Thanks bro. To all of you wanting to enable Double Tap 2 Wake Dt2w, firstly please thank @optimumpro coz of whom I am aware of the mod kernel aduitor https://forum.xda-developers.com/attachment.php?attachmentid=4484977&d=1524581025 Thanks Optimumpro
? Goto to kernel aduitor grant root and head to wake. Then enable dt2w
how to remove this notice?
EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Install magisk, download titanium, remove pixel setup.
EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Long press on that notification then i option will come then click on it then tap disable...done
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Tarunshrm864 said:
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Click to expand...
Click to collapse
you installed via twrp p-lag-fix.zip? I installed it after aex 5.7 and now I have somehow shown that the version of DP3 is installed
guyz_ahead said:
Install magisk, download titanium, remove pixel setup.
Click to expand...
Click to collapse
Can't you just delete it with the TWRP built-in file manager? That's what I would have done.