Database Users

hard brick? i'm with no twrp recovery and no OS!

it's difficult to say how i arrived here..... but i simply restored a twrp backup what was with no os and with no recovery.
is my hone COMPLETELY LOST? if i press power + vol + and vol - i only see at the centre of the screen a little android bot. ( this sequence of press was ok for the twrp recovery)
now i can only enter in test mode ( power + volum - ) but i think this is useless.
If i conenct the phone to my pc it's not recognized, pc only ask me about 10 times if i want to format that unit...........

It is very difficult to completely brick Snapdragon 801 powered device, so I'm pretty sure you are not lost. As long as screen goes on, everything is fine.
Similar situation already happend to me. All you have to do is restore stock Lenovo firmware using QFIL utility (download link is in my thread here). Steps how to do so are just the same (plug your phone whilst holding Volume+ and press download).
Here is the firmware.
Let me know if it worked.

i'm safe, i pushed twrp from bootloader screen ( little android on centre). now i have the phone working BUT............................................... BUT.................... i have NO imei.
i made a previous bad FULL wipe and i have imei: 0 now.
i have a SECOND k920 near me and 100% working, i ordered it for a friend. i'm trying to use it.... but i don't know how to do.
i discovered i have to make a backup of imei, an generate a QCN file, that should contain the imei, yes but i CANNOT PUT THE BACKUP of another k920 insime MY lenovo, or the imei will be the same! and i think it is not a good idea.
i tried to edit the file changing the imei with my imei ( i read it in the cardbox i received)
i'm using this guide http://cellphonetrackers.org/change-imei-number-snapdragon-device.html
but i'm BLOCKED at the stage to edit the imei with Winhex editor. i cant find the "imei of working phone" and change it with mine. there are thousands of numbers inside the QCN file!

Lenovo Vibe Z2Pro with Blue LED stuck
Electry said:
It is very difficult to completely brick Snapdragon 801 powered device, so I'm pretty sure you are not lost. As long as screen goes on, everything is fine.
Similar situation already happend to me. All you have to do is restore stock Lenovo firmware using QFIL utility (download link is in my thread here). Steps how to do so are just the same (plug your phone whilst holding Volume+ and press download).
Here is the firmware.
Let me know if it worked.
Click to expand...
Click to collapse
Hello Electry,
I am stuck up with my Lenovo Vibe Z2 Pro since past few days. The problem is that when I power up the phone, it shows Lenovo logo and then the Blue LED switches ON and that's it.
I tried the method mentioned in http://forum.xda-developers.com/android/development/guide-unlock-bootloader-lenovo-vibe-z2-t3114307 but of no use. Can you please help me out.
Thank You

If it's not a hardware problem then you can use this method and restore original Lenovo Stock ROM:
BootLoop/Error > QFIL Flash > Lenovo Stock 5.0.2 K920_S246_150520_ROW
But you will lose all data not backed up before flashing firmware!
c.x

spice dream uno dead :(

My Phone boot is dead. It doesnt turn on even on pressing power key or even on charging, it doesnt show up anything. I tried flashing it but it is of no use. I tried all the things in my reach but no success. Please give me a solution. :crying::crying:

Same problem happened with me any solution have any body? I Will tell my phone story
Yu
abhishek ravi said:
My Phone boot is dead. It doesnt turn on even on pressing power key or even on charging, it doesnt show up anything. I tried flashing it but it is of no use. I tried all the things in my reach but no success. Please give me a solution. :crying::crying:
Click to expand...
Click to collapse
First it was bricked then flash stock rom it's stuck on bootloop so I tried first stock rom (kit Kat to marshmallow) it doesn't work so I tried to flash recovery because bootloader is unlocked it's aslo doesn't work by Pflash tool & fastboot ; then someone recommend me flash ROM through format+download now it's dead so what should I do?.(plz give me custom ROM which can flash by so flashtool)

Need help to get into recovery mode

Hi All,
I was flashing cm 12 unofficial rom to my asus_t00j but unfortunately something went wrong and i am unable to boot to the system. the phone is starting and not proceeding post cm logo. And the bad thing is i am not ale to get into the droidboot mode by pressing the power + volume up key. Please help me to get rid of this problem.

brd8763 said:
Hi All,
I was flashing cm 12 unofficial rom to my asus_t00j but unfortunately something went wrong and i am unable to boot to the system. the phone is starting and not proceeding post cm logo. And the bad thing is i am not ale to get into the droidboot mode by pressing the power + volume up key. Please help me to get rid of this problem.
Click to expand...
Click to collapse
Let's get the major possible error out of here first. Make sure you wait for at least 45 minutes for the ROM to boot before trying anything else. Next, you must hold volume up+power button not till you get the vibration but till you see the ASUS logo. I too was stuck for quite some time till I realized that.

AviralOmar said:
Let's get the major possible error out of here first. Make sure you wait for at least 45 minutes for the ROM to boot before trying anything else. Next, you must hold volume up+power button not till you get the vibration but till you see the ASUS logo. I too was stuck for quite some time till I realized that.
Click to expand...
Click to collapse
Hi,
Thank you for your advice. But i have tried every possible way but the device is not at all booting to the broidboot mode. Please tell me is there any possible way to boot into the droidboot mode from pc?

brd8763 said:
Hi,
Thank you for your advice. But i have tried every possible way but the device is not at all booting to the broidboot mode. Please tell me is there any possible way to boot into the droidboot mode from pc?
Click to expand...
Click to collapse
Any one please help. Its really urgent. Cyanogen MOD 12 is flashed and the cm logo is starting after asus logo but unable to boot. And I am not even able to boot into droidboot to factory reset or to do any changes.

brd8763 said:
Any one please help. Its really urgent. Cyanogen MOD 12 is flashed and the cm logo is starting after asus logo but unable to boot. And I am not even able to boot into droidboot to factory reset or to do any changes.
Click to expand...
Click to collapse
Well if you can't get into fastboot mode then how can we help ?
Try debricking method or something like that.
Also post to Rom thread about ur issue .

brd8763 said:
Any one please help. Its really urgent. Cyanogen MOD 12 is flashed and the cm logo is starting after asus logo but unable to boot. And I am not even able to boot into droidboot to factory reset or to do any changes.
Click to expand...
Click to collapse
http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455/page30
Try the method in the thread above

COOLPAD COOL1 red light blinking when plugged in

So my battery went to 0% and now I cannot charge it, turn on phone or boot in recovery mode - totaly bricked... Any ideas how to fix it?

kanabol said:
So my battery went to 0% and now I cannot charge it, turn on phone or boot in recovery mode - totaly bricked... Any ideas how to fix it?
Click to expand...
Click to collapse
same here, mine coolplay6, i think flashing failed with ygdp. now cant ON cant charge only redlight blinking.

kanabol said:
So my battery went to 0% and now I cannot charge it, turn on phone or boot in recovery mode - totaly bricked... Any ideas how to fix it?
Click to expand...
Click to collapse
Flash TWRP in EDLmode ..
boot to EDL by holding volume up and volume down together with power button and connect to pc (having already installed Qualcomm drivers)
If success connect in EDL you will see diag 9008 something something in Device manager
If you were on Eui before brick-download twrp for EUI and if you were on JUI download twrp for JUI
And flash using Miflash tool..
Download twrp from https://androidfilehost.com/?w=files&flid=215465
Saved me yesterday

Actually it's far from brick(It's gone into EDL mode) but your device is far from bricked when this happens to you, press power button until coolpad screen shows up then immediately plug the cable so that it'll not go into EDL mode again, do this just everytime it happens, also it seems like this happens when I plug a type C port with QC charger or simply a cable.

How to solve the problem red light blinking on charging time and solve the fast charging problem in coolpad cool1 mobile

Hello Mentors , I have Jui recovery and I want to revert back to EUI recovery ,as I want to flash pixel expiernce or Evolution X Rom which require EUI Twrp
Please help !

_bhavesh_sharma_ said:
Hello Mentors , I have Jui recovery and I want to revert back to EUI recovery ,as I want to flash pixel expiernce or Evolution X Rom which require EUI Twrp
Please help !
Click to expand...
Click to collapse
With JUI twrp, flashing pie roms may brick the device. You need to revert back to EUI by flashing JUI to EUI rom using CDA tool. Then flash your EUI stock rom and flash EUI twrp. You are good to flash pie roms i.e pixel experience or evolution x.

nml_krishna said:
With JUI twrp, flashing pie roms may brick the device. You need to revert back to EUI by flashing JUI to EUI rom using CDA tool. Then flash your EUI stock rom and flash EUI twrp. You are good to flash pie roms i.e pixel experience or evolution x.
Click to expand...
Click to collapse
Thanks a lot ,buddy ! CHEERS !
Sent from my Coolpad Cool1 using XDA Labs

kanabol said:
So my battery went to 0% and now I cannot charge it, turn on phone or boot in recovery mode - totaly bricked... Any ideas how to fix it?
Click to expand...
Click to collapse
Change the battery.

Anurag verma said:
How to solve the problem red light blinking on charging time and solve the fast charging problem in coolpad cool1 mobile
Click to expand...
Click to collapse
When im discharge phone to 0 %, and red diode blink all times, I will charge to phone and wait 1 hour - this phone backed to life

Hardbricked Samsung J7 Max SM-615F/DS MT6757

Hello,
I have hardbricked Samsung J7 Max SM-615F/DS MT6757.
It was rooted, it had TWRP. I tried to flash Stock ROM from samsung with Odin, went well and as it was to restart, it went blank.
It cant even respond.
Please, I beg you, is there any way around.
Kindly help

Collinsaraf said:
Hello,
I have hardbricked Samsung J7 Max SM-615F/DS MT6757.
It was rooted, it had TWRP. I tried to flash Stock ROM from samsung with Odin, went well and as it was to restart, it went blank.
It cant even respond.
Please, I beg you, is there any way around.
Kindly help
Click to expand...
Click to collapse
Find a custom rom and try to flash it. Do a clean install

Hello @nithambu, the phone doesn't respond at all. Power button don't work. So, I can't install anything

Does it boot to download mod? Have you tried power button and vol. Up combo? Are you able to charge it?

I tried everything. It doesn't respond at all @nithambu