Hi, My phone started lagging, freezing and randomly restarting a few days back, so I decided to back it up and begin flashing to stock rom, but now randomly without any change to software the phone has been bricked!
When connecting to charger phone does not respond and the power button does not work.
However today I found out if I take the battery out and put it back in and connect the phone to my PC the pc does make a noise but dosen't actually display the phone.
So I decided to take the battery out for 5s, then put it back in and hold vol down, power and home button for 5s and then volume up to go to download mode (nothing shwon on screen of phone), but am having no luck!
Odin does not pick my phone up however when I plug my device in under device manager it shows "qualcomm hs-usb qdloader 9008"
Is my phone hard bricked and any way I can fix?
Thanks
Sounds pretty bad, but last ditch effort, install Kies 3 and try the emergency restore or whatever it's called. Good luck.
Sent from my SM-N910T using Tapatalk
Please any help!
Related
LG nexus 4
I don't know what happened. but I was running cyanogen mod 10.2 M1 snapshot. Tried to flash googy max 1.7.8 via rom manager and the flash failed, no big deal but when attempting to reboot the phone never turned on. Shows red light and will blink if I hold in the power button while it is connected to a charger.
other than that it does nothing at all.
sucks. I have tried every button combination and disconnected the battery and reconnected. to no avail.
when connecting to computer the computer recognizes "something" but I can not access the phone at all. When holding in power button acts like it disconnects then connects then red light blinks then disconnects again.
Will connect when I just plug it into computer with Qualcomm HS-USB QDloader 9008.
Is there anything more I can do? Aside from buying a new phone? :crying:
Google red light of death. Do your homework. There's loads of help on this.
Sent by mobile telephone.
Let it charge for a few hours/overnight, then boot into the bootloader (volume down+power). Once in the bootloader select 'Start'.
Sent using xda-developers app
Chromium_ said:
Let it charge for a few hours/overnight, then boot into the bootloader (volume down+power). Once in the bootloader select 'Start'.
Sent using xda-developers app
Click to expand...
Click to collapse
Ok I will let it charge over night but so far I can NOT get into boot-loader. That is what makes me so worried.
yantheman said:
Ok I will let it charge over night but so far I can NOT get into boot-loader. That is what makes me so worried.
Click to expand...
Click to collapse
ended up getting a replacement from google fortunately I still had my warranty working.
My LG G2 (rooted with AOKP ROM a month ago) just got bricked about an hour ago. It was completely random too, I had it playing music via bluetooth in my pocket and all of a sudden the music stopped and when I took my phone out of my pocket, it was unresponsive to any button pushing. I plugged it in to my computer to see if I could debug it on there since the screen was completely black no matter what I did (long-pressed the power button and tried hard reset but still black screen). So when I plugged it into my computer, windows said "USB device not recognized" so I can't even do anything with it. I have no idea what to do and am in need of some help . I tried to include all the relevant information and if I missed anything, just ask. Thank you in advance for any advice you guys can give me.
Plug it into a charger and try different button combos, holding them for up to 30 seconds
power+up.. etc
Can you go into download mode ? (while powered off. press volume up and insert usb cable)
I had rooted my dad's lg g2( D802) and installed twrp using an app named autorec as it was recommended by many people in the internet and had very high ratings and downloads in the play store. Everything was fine for a few weeks till I noticed that the app had an update. So I flashed twrp again from the app hoping it was a newer version and it said it completed the operation successfully. Then I just used the phone for sometime and after that I switched off the phone to enter the recovery. After it switched off, I pressed the button combination for entering the recovery but nothing came up. Then I attempted to just boot the phone and kept pressing the power button but nothing came up. I even kept pressing the button for upto a minute to hard reboot it in case it was just a case of hanging but nothing came up.After that, I plugged it in for charging and attempted to boot again. After I kept pressing the power button for about 30 seconds while charging, the led blinked red 8 times, paused and repeated itself as long as I kept holding the power button.
The problem is that it even the screen doesn't turn on.
I searched for this issue and saw that many others were facing this issue. I tried the following solutions given by them which did not work:
1) Holding the power button for a long time
2) Keeping it for charging until it's full but nothing comes up and the phone got heated up very much untill I stopped it a few hours later.
3) Removing the back cover and detaching the battery power cable from the phone after after waiting for sometime, reattaching it.
My dad showed it to the lg repair centre but they told him they need to replace the whole board which is very expensive, especially considering that it is a 2+ year old phone. My dad is very angry at me and probably won't let me touch his phones ever again if I don't fix this. Please help me.
Thanks in Advance
Edit: the charge was at 45% when I switched it off. Don't think it is because of low battery
With the phone pluggged into your computer, does the computer recognize the phone? And if yes, what does Device Manager report it as being?
arvindr07 said:
I had rooted my dad's lg g2( D802) and installed twrp using an app named autorec as it was recommended by many people in the internet and had very high ratings and downloads in the play store. Everything was fine for a few weeks till I noticed that the app had an update. So I flashed twrp again from the app hoping it was a newer version and it said it completed the operation successfully. Then I just used the phone for sometime and after that I switched off the phone to enter the recovery. After it switched off, I pressed the button combination for entering the recovery but nothing came up. Then I attempted to just boot the phone and kept pressing the power button but nothing came up. I even kept pressing the button for upto a minute to hard reboot it in case it was just a case of hanging but nothing came up.After that, I plugged it in for charging and attempted to boot again. After I kept pressing the power button for about 30 seconds while charging, the led blinked red 8 times, paused and repeated itself as long as I kept holding the power button.
The problem is that it even the screen doesn't turn on.
I searched for this issue and saw that many others were facing this issue. I tried the following solutions given by them which did not work:
1) Holding the power button for a long time
2) Keeping it for charging until it's full but nothing comes up and the phone got heated up very much untill I stopped it a few hours later.
3) Removing the back cover and detaching the battery power cable from the phone after after waiting for sometime, reattaching it.
My dad showed it to the lg repair centre but they told him they need to replace the whole board which is very expensive, especially considering that it is a 2+ year old phone. My dad is very angry at me and probably won't let me touch his phones ever again if I don't fix this. Please help me.
Thanks in Advance
Edit: the charge was at 45% when I switched it off. Don't think it is because of low battery
Click to expand...
Click to collapse
more info... what variant? phone does not boot.. can you press vol up then plug phone .. does download mode works... stay calmed this can be fixed..:fingers-crossed:
I haven't tried plugging it to the computer. The way to enter download mode is holding the volume up button right? Thank you for the suggestion. I'm away for a few days but I'll tell my dad to do so. I'll post what happens then. Variant is D802
OK I told him to do that. When he pressed the volume up button and then plugged it to his computer, 13 new partitions showed up in windows, and it is telling him that he needs to format the positions to use it. But nothing is coming up on the phone
Do NOT let Windows format the partitions(!)
Use the SRKTool instead to unbrick from qhsusb_bulk mode:
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Afterwards use LG Flash Tool 2014 to flash the KDZ for your variant:
http://forum.xda-developers.com/showthread.php?t=2432476
It's better to let the battery charge to full first. Shut down the phone by holding PWR button for 10 seconds, then plug charger. It should work even in bulk mode.
Did you try these simple things...
shutdown phone keeping powerbutton down.
Start pressing power button & vol down....when you see LG logo for couple seconds. Release fingers and press vol UP and vol DOWN, same time. No power button.
MB525 said:
Do NOT let Windows format the partitions(!)
Use the SRKTool instead to unbrick from qhsusb_bulk mode:
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Afterwards use LG Flash Tool 2014 to flash the KDZ for your variant:
http://forum.xda-developers.com/showthread.php?t=2432476
It's better to let the battery charge to full first. Shut down the phone by holding PWR button for 10 seconds, then plug charger. It should work even in bulk mode.
Click to expand...
Click to collapse
But the problem is, even the screen doesn't turn on while on download mode. I'll surely try out the unbrick tool but will it work since normally, the download mode screen comes up. That thing is 760mb. I think it'll take some time for it to finish. (Ultra slow internet connection )
mal13 said:
Did you try these simple things...
shutdown phone keeping powerbutton down.
Start pressing power button & vol down....when you see LG logo for couple seconds. Release fingers and press vol UP and vol DOWN, same time. No power button.
Click to expand...
Click to collapse
The lg logo doesn't come up when I do that. If fact, even the screen does not turn on
Thank you guys! Srk tools worked! Again thank you very much
Hi! I managed to hard brick my galaxy s7 edge and i wanna see if someone here knows if its hard bricked or soft.
Got root and had renovate rom 2.0 ( n7 port) then i wiped my phone and flashed renovate 3.3 (s7 edge stock)
my phone worked fine on startup and i started to restore my old apps through gmail. i thought it would take a while so put my phone in my pocked and let it be fore about 20 minutes then when i took it up it was complete dead. i had about 67% before it died i tried everything (vol up down home all together) for at least 15+ sec. had it charge over the night ( i noticed that the phone didnt get warm or any leds shown) in the morning i tried everything again and nothing. when i connect my phone to my computer i hear the connect sound and then it disconnect a sec later. if i hold power button down and connect it ( and dont release power) my computer recognize it as onyx8890 and if i release powerbutton it disconnects. cant boot it in any way whatsoever. so what do you think? its only a week old thats the worst part of it!
I have left it to the store I bought it from for warrantable but its still rooted and have a rom on it. well if its complete dead they cant see if its rooted so thats one good thing.
still want to hear you opinion
sorry for bad english
so, from what I understand, u cant boot into any mode, are u even able to see something on screen? (logo, boot screen, etc.) U can try JIG (it somehow make any samsung device go to download mode). otherwise idk.
Hi guys, I have the same problem with my S7 Edge.
Can anyone help?
OK. So I managed to recover my phone.
The phone was dead because of a software crash(nothing on display, no LED light, power+vol. down for reset not working) and when connected to my PC - nothing (just a connect and after 1 sec. a disconnect sound).
But if I kept the power button pressed without letting go, my PC would detect the phone as exynos8890.
I tried to keep pressing the power+vol. down while connected to PC and I realized that the combo worked because after ~7 seconds the phone would disconnect and reconnect itself (but still as exynos8890).
But I tried a different approach. While connected to the PC I tried to keep on pressing power+vol. down. And I could hear that it disconnected and reconnected. But I did not let go of the buttons. And again a connect and disconnect. And again. And after literally 5 minutes of the buttons kept pressed down without letting go and countless reconnects there was finally a change. The disconnect sound was not heard after the connect sound. At that point I stopeed pressing the buttons and when I looked at the phone I could see that the battery icon appeared. Since the phone was connected to my PC, after 1 min. the battery started charging (it was charged 31%). And after that my phone booted fine.
wow
Hi I have just bought an s7 which turned out to be a Korean G930L but I cant get any response out if it apart from the 2 bottom leds and and the blue one. No response from trying to get into recovery or download mode, basically a black screen though it does vibrate on what i think is start up. It is found by pc and Odin and charges ok, I can tell as I can see properties on pc. But no other response. Is it possible that the previous owner tried to root it using non korean rom or TWRP? Any advice on how to fix either getting TWRP on or screen to light up. I am sorry for being so vague I have pulled it apart and checked all of the connections, screen, motherboard etc but nothing. Or chuck it out or put back on eBay. I tried your idea but it only booted once in that 5 minute period so I tried without it plugged in and rebooted several times but still no screen response.
Hello All,
Yesterday I dropped my phone and the power button got stuck. I opened the phone with my tools and was able to fix the button. I didn't power it off, I didn't think it was needed since the button itself has nothing to do with the electronics inside. While I was closing its back It suddenly turned off. I was very gentle, didn't do any fast or unsafe moves. Since then the phone shows no sign of life. I plugged the phone the my pc but there wasn't any sign of life either. The phone didn't show up on Device Manager or anywhere else. One time, I heard a connection sound but I am not even sure if it was because of the phone since the sound came like 5 minutes after I plugged in the phone.
I already tried pressing all 3 buttons for a long time but it didn't do anything.
So what do you think? What might have caused it? And can you help me?
Thanks
First thing i would do is tear down and disconect/conect the battery flat. After that, hold volume keys while conect to pc usb and see if you can get edl mode. Than flash all that has to be flashed with miflash and edltools.
brunojborges said:
First thing i would do is tear down and disconect/conect the battery flat. After that, hold volume keys while conect to pc usb and see if you can get edl mode. Than flash all that has to be flashed with miflash and edltools.
Click to expand...
Click to collapse
Thank you, I will try that when I get back to home.